How To Replace Lower Control Arm Bushings In Car!

Рет қаралды 367,815

6 жыл бұрын

How To Replace Lower Control Arm Bushings In Car!
Intro and outro is Preacher's Daughter by 3 Inches Of Blood
• 5 Preacher's Daughter
Bushing Tool on Amazon: amzn.to/2vmejb1
New Snap-on Tool Review Merch is available for purchase here:
teespring.com/stores/the-snap...
Merch for the Snap-on Collectors Facebook page is available for purchase here:
teespring.com/stores/snap-on-...
Check out the new Patreon page designed to give you fans some cool stuff that you cannot get anywhere else!!
Click / snapontoolreview to show your love and support for what I do on KZfaq!!
BE ONE OF THE FIRST TO GET A CUSTOM STAINLESS TOP FROM SHARK!! sharkequipment.com/password
Please Consider leaving a donation if you like the videos. Every Donation helps the channel get better! Click the link below and start supporting!! Thank you!
www.paypal.me/SnaponToolReview
Thank you for watching! As always leave a like, comment and subscribe!! Everything helps.
I do not work for or sponsored by Snap-on or any other tool company. I have spent my own money on making these videos and all the tools you see in them.
If you have a product you would like to get featured on this channel you can email me directly at toolwhore78@gmail.com
For Fan Mail(please no anthrax or death threats) please forward it to this address:
Joel Neufeld
204-2175 Shaughnessy St.
Port Coquitlam BC
Canada
V3C3C7
How To Replace Lower Control Arm Bushings In Car!

Пікірлер: 237

@TheSnapOnToolReview 6 жыл бұрын

Link to buy this bushing tool on amazon is in the description👆🏻👆🏻👆🏻

@joelwomack81 6 жыл бұрын

The Snap-On Tool Review is that a crack in the frame?

@marcchantal5016 6 жыл бұрын

👍

@supersabrosinho 3 жыл бұрын

Link doesn't work anymore. Anywhere else?

@RacerXV23 2 жыл бұрын

@@supersabrosinho yes, Napa Autoparts now carries this tool as part# SER-68100. Hope this helps!

@supersabrosinho 2 жыл бұрын

@@RacerXV23 thank you 👍

@tonydeangelis995 6 жыл бұрын

I like how you edited lower volume on the impact gun, nothing worse than having to adjust volume while watching. Nice extra touch.

@TheSnapOnToolReview 6 жыл бұрын

Thanks man. Yeah I figured so too.

@TheSoravalor 2 жыл бұрын

@Andrew Brickhill yeah lmao plenty of noise fixing a car

@lawrencedavidson6195 2 жыл бұрын

@Andrew Brickhill If you have headphones on it can hurt your ears. If other people are around and you don't want to disturb them, the lower sound helps, not everyone is into what you are into.

@BigBassChasin 6 жыл бұрын

Wow. I work on nothing but Honda’s and Acura’s and other Asian imports only and haven’t seen this tool yet or had any tool rep even mention it. This is a life saver on wasting time going to press to press them out and back in! Ordering me one NOW

@paulthecarwhisperer250 4 жыл бұрын

This is awesome. Most videos just show how to replace this bushing by removing the entire control arm. This is way easier!

@asmautollc 6 жыл бұрын

Nice. Good to see the BP version in action. In an inverse of your exp, I’ve had to toss perfectly good poly bushings & use inferior ones that came with repl parts / kits b/c I didn’t have the right tool.

@bobbywills2111 Жыл бұрын

The first Eric video I ever watched was him vs. oddy door slider wheels ever since then I only trust Eric's videos such perfect attention to detail and camera placement all by himself bravo Eric bravo

@zk2299 6 жыл бұрын

Shows you actually use the tools you review instead of some you tubers just buying fancy tools and never using them. Nice work!

@TheSnapOnToolReview 6 жыл бұрын

I use all my tools. Thanks man.

@mirek6937 5 жыл бұрын

Wow. That's a nice work. With out taking whole lower arm out u change the bushing. Bravo

@Tundralifted 6 жыл бұрын

Omg this was an awesome video bring us more of these how to videos.🤗🤗👍🏻👍🏻👍🏻👍🏻

@coreysuttles1362 6 жыл бұрын

As always awesome video bro, I have personally learned quite a bit from you!! Thank you for turning me into a snapon fan!!!! I also want to thank you for giving me plenty of stuff to watch while the wife is on Pinterest 😂😂🤘🤘🤘

@honda_doc6826 6 жыл бұрын

One of the best tools out there especially if your working on a lot of Honda/Acura’s. Not bad of the price either, with the time you save it’s worth the price.

@henry_3r776 6 жыл бұрын

Nice and easy ... Bad ass snap on gloves you have there..!!!

@beansie5493 5 жыл бұрын

Nice, and straight forward. Thank you

@victorr648 6 жыл бұрын

Good to see a how to video..keep them coming!!

@joachimjohan1215 6 жыл бұрын

BEST VID YOU've MADE!

@mdlee52 6 жыл бұрын

Excellent tutorial, Joel!

@NoPrepFans 6 жыл бұрын

Awesome time saving tip and tool thanks

@jakskelington666 2 жыл бұрын

Might use this method for my Honda S2000. Thanks for sharing!!!

@stevehicks5735 2 жыл бұрын

Very good video one of the better ones I have seen very well done

@BigDaddysGarage 6 жыл бұрын

Your "how to" videos are awesome! Thank you.

@TheSnapOnToolReview 6 жыл бұрын

Thanks man.

@mattmcmillan8920 6 жыл бұрын

Great video and with the tool you were using it was pretty damn fast thanks for sharing.

@jesusayalaalvarado6561 6 жыл бұрын

Best vídeo to repair bushings

@nbcoal1 6 жыл бұрын

Great video Joel!

@pokuanchoo4180 3 жыл бұрын

Good job guy. Thanks for sharing

@justfixit9726 3 жыл бұрын

Worked great thank you, 07 accord dident have to remove axle nuts.

@Bryan916 6 жыл бұрын

Solid Repair

@geoffclark9820 6 жыл бұрын

Man you automotive guys got it easy!

@WA-zl6ju 6 жыл бұрын

Thanks for the videos. There awesome

@shaunryan2473 Жыл бұрын

Love your work 🙏

@PKhanz 4 жыл бұрын

The 3 inches of blood outro made me smile

@billthestinker 2 жыл бұрын

Excellent upload thank you

@andrewzen98 4 жыл бұрын

Nice job. Thanks

@JohnLabu21 11 ай бұрын

Great tool, saves time

@CanadianCharlie64 6 жыл бұрын

I would love to have a tool like that

@WA-zl6ju 6 жыл бұрын

YES, Joel got to use his new pry bar.

@MarioContreras-zs6uc Жыл бұрын

Awesome vidoe brother appreciate it!

@mattbrennan8088 6 жыл бұрын

nicely done! I must get one of those kits now! You made that look easy

@TheSnapOnToolReview 6 жыл бұрын

The accord and TSX are even easier!

@MA-vm6jl 3 жыл бұрын

@@TheSnapOnToolReview do u have a video link to the accord one?

@sean-eu9qv 6 жыл бұрын

Great video when you do the bolts right up on the control arm you should do it up with bit of lowed on it or at ride height. It stop the bash's from tearing. Just a idea. Thanks.

@golfish8589 Жыл бұрын

01 odyssey. At highway speed the van veers right when foot taken off accelerator. The steering wheel a actually ticks slightly left when this happens. Then the van corrects itself when accelerator is pressed again. And goes back to straight. There is tiny tie-rod play both sides. Tires have even wear. Van cluncks front left when accelerating after coming to a complete stop. Front and upper right motor mounts were just replaced. My nephew replaced both struts and springs about a month ago. Passrnger side vertical control arm bushing has some cracking. Van has 191,000 miles. All rubber suspension bushings were replaced at 135,000. Plus motor and tranny mounts.

@fpplsoftwashpressurewashin8757 3 жыл бұрын

excellent video

@Maroco918 5 жыл бұрын

Do more of these!!!!!!

@tomaspaez8352 6 жыл бұрын

Nice tool homie fast jobe

@kennethemerson2551 3 жыл бұрын

Perfection

@azazam8805 3 жыл бұрын

Thank you

@BPoweredLove 4 жыл бұрын

Thumbs up. Good video. However, I wish you'd address the inquiries as to why you didn't torque down the control arm fasteners under load as several sharp viewers are pointing out. I'm curious about that as well.

@user-lg7um3vu9d 6 жыл бұрын

More videos like this!

@ukgardener973 3 жыл бұрын

Thanks

@michael1294 2 жыл бұрын

Does this same method apply for the 2009-2016 with the vertical bushing in the aluminum holder? I am having a time breaking the ball joint loose.

@robdevitt2929 6 жыл бұрын

I like how it said 'no impact' on the nut!😂😂 fair play Joel! Haven't got time 4 that shit! Great video as always m8!👍

@kwmiked 6 жыл бұрын

Rob Devitt he didn't impact on the Nut

@TheSnapOnToolReview 6 жыл бұрын

Very true. Haha

@TheSnapOnToolReview 6 жыл бұрын

I’ve warrantied the Long bolt a few times. The threads thin out but it has a lifetime warranty on it so I don’t care.

@196clint 4 жыл бұрын

Nice Video. Do you know if this on vehicke method works for 08 Toyota Solara?

@chillboymusic 2 жыл бұрын

Wow you make this look so easy!! Why do mechanics say it’s more labor to replace the bushing then replacing the control arm?

@bobbywills2111 Жыл бұрын

Eric you honda lovin know it all!! you sold out!!! I ❣️ IT keep up the great work Bud love the new shop also btw...quick ? My inner tires are wearing quick the alignment is perfect...compliance bushings not so much do u think I should start there?New oem struts also...

@LowNKum 4 жыл бұрын

Where did you get that bushing from? I only see ones with slits inside them.

@jonnyacosta1419 3 жыл бұрын

Nice video

@zaviarthompson8590 2 жыл бұрын

great job..

@jamesmull1747 2 жыл бұрын

Which manufacturer product would you recommend for the lower contro arm bushings for my 2008 TL-S?

@johngilley3518 6 жыл бұрын

Could have used that when I replaced most of the front end on my daughter's car. Does that fit Nissan or slightly different?

@montevallomustang 6 жыл бұрын

oh the csx, one of the cars we didnt get in the us. I would love a civic si with leather but not in the usa

@s34nvideos 3 жыл бұрын

I dunno about this mate. If you remove the lower ball joint nut, you can have it on a bench. You removed the axle nut instead, same amount of nuts but more awkward. Also, it's easier replacing the lower control arm because the ball joints are riveted in. So if your bushing is gone here, your lower ball joint bushing isn't far behind. Also, if you buy the whole arm, you don't have to press anything out at all. Way easier and better value for money

@schifoso 15 күн бұрын

It's much more for the whole control arm than just the bushing.

@maxchartier 5 жыл бұрын

shouldn't the forward bushing be tightened when the suspension is at ride height? thanks.

@julioserna5659 3 жыл бұрын

Hi !! Are any replacement bushings good? Thanks!

@agnisinatria3520 3 жыл бұрын

What is the minimum torque to put out and in? Can we use manual tools with long bar as extention?

@jeffreyt5133 5 жыл бұрын

Sweet

@vicentepantoja5845 5 ай бұрын

Would you need an alignment after replacing just that bushing

@dillwiggle2 6 жыл бұрын

BAM !!!

@gr2262 5 ай бұрын

Would the same procedure be for 99-04 odysseys?

@aissaaneslyes3566 6 жыл бұрын

I think that the direction ball joint is not fixed right because the curvature of the ball joint axle goes always to the inside to avoid the wheel , correct if I am wrong

@shantor100 Жыл бұрын

Do you have to jack the wheel up to level before tightening everything

@amirsaberi8357 Жыл бұрын

tnx

@thomaschurch8383 2 жыл бұрын

Nice. Dealer wants 2 grand to replace on my odyssey. I think I’m gonna do myself

@sakitlikod1 5 жыл бұрын

Is this the same application for 2004 odyssey? Thanks

@pooppoop3084 Жыл бұрын

Can this be done a TL

@zoilareyes2801 6 ай бұрын

I'm about to do this for my Toyota Corolla, and watched your great video makes me nervous! hope all goes ok, will not be doing in the Toyota dealership, but CB, is very expensive as well!..

@jomartino1440 2 жыл бұрын

I’m trying to find this tool cannot find anymore, there anybody knows where I can buy this tool thanks guys

@dant3113 7 ай бұрын

Quick question. Can you replace bushings on all control arms? My Crosstrek needs bushings replaced it looks like it be a lot cheaper to just replace bushings than control arms

@woosukchoi2897 6 жыл бұрын

I need this like tool for rear diff bushing of Subaru legacy. Whenever I replace diff bushings, I had to do hammering in order to install bushings and it made me anniying. I should search this thing on Amazon. Thank you for useful information.

@macalfc1019 6 жыл бұрын

Are these the new impact gloves Joel or the original ones ? And does that bluepoint kit only do honda or other brands ?

@jorbitz69 5 жыл бұрын

Nice compact impact gun you're using for this video. Who's the maker?

@harrisfogel6992 4 жыл бұрын

Thanks for the video. Curious why this bushing seems to fail over time, but the other horizontal bushing doesn't have the same issues. At what point do you feel you should replace the entire arm with new bushings and ball joint vs. just replacing this bushing.

@May16Joe Жыл бұрын

It depends on the people. Some people prefer original honda parts but a lower control arm is around $400 but the bushings are around $60 each so they rather replace the bushings only. Some people don't care about original honda parts and buy a new aftermarket lower control arm for $70.

@sammeehan4323 6 жыл бұрын

How did you live before having those snap on pry bars

@burnshirt 6 жыл бұрын

Maybe you can help me with tthe name of the sockets im looking for they have like an extension and the wobble end with the six point on the end of them i seen them in on of your videos and cannot figure out what they are called thank you

@J8MORS 6 жыл бұрын

Cool beans

@liamflynn6929 3 жыл бұрын

Do we have to torque it back on to a specific amount?

@throttlefilms 2 жыл бұрын

does replacing control arm bushings help steering feel better?

@kadianh7676 2 жыл бұрын

Does this bushing tool work for the 08 accord?

@julianarodriguez3635 2 жыл бұрын

Did you get the bushings from honda let me know thanks

@83RBurke 2 ай бұрын

I know it’s an old video but can you update the link on the bushing tool? It’s no longer available

@pinoyeh 5 жыл бұрын

One observation is that the hub should be lifted/jacked to make the control arm in the neutral position (when the vehicle is in correct/standard ride height) before tightening the rear control arm bolt. By not doing this, the rear control arm bushing may fail.

@yairp4m597 3 жыл бұрын

muy bueno el video, pero y el torque?

@bluetorch13 2 жыл бұрын

"No Impact" ... BRRRRRRRRT! BRRRRRRRRRT! lol

@sentineldrak8825 4 жыл бұрын

I have a question I can see that the bushing u replaced in the video is the same i see in my honda civic but it looks damaged. When i drive above 60 mph my steering wheel starts to shake u think thats the reason why its doing that.

@LIKECHRIS88 3 жыл бұрын

Where to buy that special tools

@mathewcarbajal3934 4 ай бұрын

What kind of noise does a broken control arm bushing make?

@dalowryda Жыл бұрын

Can this method be used for a 8th gen civic? (2006-2012)

@stevenjones1824 6 жыл бұрын

Awsome video, my dealer told me yesterday that snap-on has a new brushless 18v 1/2'' impact out now , maybe you could ask Tyler and see if it is true thx keep rockin.

@TheSnapOnToolReview 6 жыл бұрын

Oh I know its true. I've seen the specs and picture. but I wasn't supposed to say anything. but if your dealer has told you then yeah, It's coming!

@poon589 4 жыл бұрын

I really like the smarter way you remove bush (w/o any special tool). I could do it myself? Majority of nearest foreman here is doing most simplest work, either install complete new set of lower arm (or any arm with bushes) or send it to engineering machining shop to dismantle old and mount new bushes (off course owner bear for it with additional profit margin on this particular work).

@benjaminzhou9503 4 жыл бұрын

Nice video Joel! Just a newbie question, how to make sure you don't push the new bushing over the optimal depth? I'd like to do this on my 2002 Sienna. thank you!

@BrotherTay Жыл бұрын

yeah I highly doughty my bolts will come out had to cut off the strut bolts may see if shop class can hit em with the torch

@hqn12 5 жыл бұрын

How come u didn't tighten the control arm bolts on a load?

@negrumarius 4 жыл бұрын

👍

@Jaisean 2 жыл бұрын

Cool video but did anyone else notice that big chunk of metal that came off @ 7:58? Will that be a big deal? I’ve been thinking about replacing my own bushings so I’m watching these videos.