How to fit an Angle Grinder blade, label up or label down?
Рет қаралды 191,814
3 жыл бұрынHow to fit a replacement Angle Grinder blade and how to decide label up or label down! This can be a tricky question for DIY handymen and professionals alike. I have been using angle grinders on stone marble and granite for 40 years and here is what I think!
If you need a diamond blade it can be useful to see the reviews here : amzn.to/3jf33kB
Carbide ultra this discs: amzn.to/31rWsNH
You must have a good dust mask, the one I use can be bought here on eBay ebay.to/35syZgq
If the Parkside cordless angle-grinder is not available try : amzn.to/34si5iT
As an Amazon Associate I earn from qualifying purchases
If you would like to see examples of my professional stone engraving work
please visit www.stoneengravings.co.uk
If you would like to learn how to engrave stone as a professional : www.stoneengravings.co.uk/mem...
Thank you to Dan Lebowitz for the beautiful intro music.
freemusicarchive.org/music/Cli...
creativecommons.org/licenses/...
Other music from the KZfaq free music archive. Thank you
@ninawade3055 Ай бұрын
Thank you for showing me which way to put the blade on , out of all the videos I watched you are the only one who has showed me about installing the blade and not talking about 1000 other things lol
@thestonecraftingworkshop7490 29 күн бұрын
You are welcome
@thehicks-morganminifarm9859 20 күн бұрын
Do it yourself chic here.....I ran into a issue with some rusted bolts on my faucet....researched a work around, went to the store and saw the sea of blades and wondered what was the difference.....thanks so much for clarifying how to install all of them...
@thestonecraftingworkshop7490 19 күн бұрын
You are very welcome, best of luck with your job!
@tania7930 2 жыл бұрын
You still have all your fingers after 40 years. One of the many dangerous tools in the handyman’s workshop Excellent how to video Thank you
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you!
@steveoranges1960 2 жыл бұрын
It's really irresponsible of manufacturers not to include crystal clear instructions on these things. They have lots of safety warnings but they neglect to mention how *exactly* the disks and wheels are supposed to attach on
@thestonecraftingworkshop7490 2 жыл бұрын
That would be nice wouldn't it? But then no-one would watch my video! Thanks for watching.
@cromyjr1592 4 ай бұрын
Or they put drawing-heavy manuals with as few words is possible, and where every drawing is using only one line thickness and words are chinglish or japglish (I'm looking at you, Makita)
@eyezex 3 ай бұрын
Totally, I guess I been doing it right just by luck or good ol common sense.. good to know
@maxpsanchu7386 9 ай бұрын
I had a lot of old pipes and rebar to cut up and from what I read kzfaq.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
@thestonecraftingworkshop7490 9 ай бұрын
Thank you,
@timthorne3412 2 жыл бұрын
Lovely presentation...just bought my first angle grinder and this has given me the confidence to set it up safely...well done mate
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it helped
@tjjordan9715 2 жыл бұрын
I've somehow made it through 50 years without learning anything practical. No more. Thank you, sir, you're an excellent teacher. My father taught in a similar manner except with much more punches, name calling, and vicious kicks to the body of a downed son. Okay, there's no similarity whatsoever. I subscribed.
@thestonecraftingworkshop7490 2 жыл бұрын
I promise never to use violence! Cheers!
@ellipsiswellbeing1691 10 ай бұрын
Thank you - so many videos are rushing through this topic to cater to the 'goldfish' attention span of our times - but this one actually gave me the understanding I needed! Subscribed!
@thestonecraftingworkshop7490 10 ай бұрын
Glad it was helpful!
@gordonpeirce5967 Жыл бұрын
Hi, firstly thank you for the great safety aspects, as there are many people just starting to use Grinders. I have looked into the correct way to put on a Steel cutting disc and all manufacturer's have avoided the answer. As I know that a disk can chip if used incorrectly, I have to agree with you that the washer must go on top where the locknut fastens it, this removes the tension on the fibres under the locknut when tightening. Well done and thank you for talking about safety as this will help beginners a lot.
@thestonecraftingworkshop7490 Жыл бұрын
you are very welcome, thank you for taking the time to leave such a constructive comment, cheers!
@camduran3352 Жыл бұрын
At 2:20: “You’d be surprised how little fun that is.” Quite true… such an oversight typically fails to produce much fun. Given the accent though… well… I nearly wheezed up a lung! (With a degree in Sarcastic Sciences, that really doesn’t happen often.) Seriously though, thanks for making this great video, Sir. It’s very easy to follow and answered all my questions!
@thestonecraftingworkshop7490 Жыл бұрын
Glad you enjoyed it, thanks for watching!
@itsshrimpinabag9544 Жыл бұрын
Thank you so much, sir! You answered several problems I was encountering, including losing the original wrench and having the nut locked on. Thank you for the label-up explanation; I can't believe how many videos I've watched that have said label DOWN, but none of them explained why. You at least have some logic to what you do, and I think I'll follow your advice!
@thestonecraftingworkshop7490 Жыл бұрын
Hi, thank you for the kind comments. Nag of the day ...... Please wear eye protection when using an anglegrinder, thank you again!
@itsshrimpinabag9544 Жыл бұрын
@@thestonecraftingworkshop7490 Thank you! I did, and my eyes are glad about it because I was able to keep them open the whole time as a result!
@theuglidog 3 жыл бұрын
was confused a bit when i got a new blade but your slow, precise, explanatory, no mumbo jumbo ,answered my questions thank you so much all the best to you
@thestonecraftingworkshop7490 3 жыл бұрын
You are welcome, thank you for watching.
@poohpot4462 2 жыл бұрын
Excellent video thank you so much for doing this. Really appreciate it! I think all user manuals should come with an accompanying video like this that the customer watch.
@thestonecraftingworkshop7490 2 жыл бұрын
Totally agree! I cant understand why so many products have very poor instructions, I guess its just laziness on the part of the sellers. Thank you for watching!
@Okkis07 7 ай бұрын
Clear and very informative, even for a Norwegian amateur! Thanks a lot, 😊
@thestonecraftingworkshop7490 7 ай бұрын
Glad it was helpful!
@sliobutros6664 9 ай бұрын
Thank you so much, I asked this question just today (I mean how to pot the locking nut), now it is absolutely clear, I appreciate that for you great teacher 👍👍👍👍
@thestonecraftingworkshop7490 8 ай бұрын
You are very welcome
@chriswooster 3 жыл бұрын
Thanks for this video. I learned the answer to literally every question I had about changing the blades on my new grinder.
@thestonecraftingworkshop7490 3 жыл бұрын
Hi Chris, Glad I could help and thank you for watching.
@bigmarkpepper 2 жыл бұрын
The best trainer I’ve come across in year’s! Thank you.
@thestonecraftingworkshop7490 2 жыл бұрын
Happy to help!
@mickyp9517 2 жыл бұрын
Superb, clear presentation! And I bet you've prevented many accidents too! Thank you!
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you for watching!
@peterpiper6837 7 ай бұрын
Thank you Steve that was really well explained, I've seen a couple of your videos and you are now my 'go to' man- please keep the videos coming, you make them very watchable because you explain things so well.
@thestonecraftingworkshop7490 7 ай бұрын
Thanks, will do!
@claytonpulley4947 3 жыл бұрын
I also just purchased my first angle grinder. Your video has taught me a lot of invaluable information, ready to get to work, all the best!
@thestonecraftingworkshop7490 3 жыл бұрын
Glad I could help, Thank you, happy new year!
@bobbyb7127 3 жыл бұрын
I just started using a grinder and have been taking educated guesses as to which way they went. Thanks, your video has helped me out a lot!!!
@thestonecraftingworkshop7490 3 жыл бұрын
Great to hear! Thanks for watching.
@barbaragrant4579 7 ай бұрын
Thank you for detailed information on different blades & how to put them on.
@thestonecraftingworkshop7490 7 ай бұрын
Glad it was helpful!
@Beastt17 Жыл бұрын
THAT is the video it seems everyone else has neglected to produce. Thank you!
@thestonecraftingworkshop7490 Жыл бұрын
Glad to help!
@melmorris134 Жыл бұрын
You are my hero, I couldn’t figure out up or down for my recessed stone blade, as I’m new to angel grinders having only ever worked on far smaller rocks and glass sculptures until now. So grateful 🥰
@thestonecraftingworkshop7490 Жыл бұрын
Hi Mel, thank you for the kind comments. Time for my old man grandad nag - please wear safety glasses or goggles and a good dust mask all the time when using an angle grinder. As you are new to these tools have you considered using a cordless angle grinder? They are lower powered and therefore safer to work with. And you can use these with a water feed without risking an electric shock. (though this will invalidate your warranty ) I love using my Parkside one for carving and finer stone cutting. Enjoy your carving!
@peterchessell28 Жыл бұрын
How many angels have you injured up until now.?
@AndreFouche 3 жыл бұрын
Great, well explained video - cleared up a lot of my questions!!
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@sefordyce2563 3 жыл бұрын
How WONDERFUL! I'm just learning to use this tool, and your information is ever so helpful. Thanks a million.
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@jeremykemp3782 8 ай бұрын
Good explanation ., well done mate. Back in the day the arrows used to point in the direction with label facing down, that's how that got stuck into traders brains. But not the case anymore, just use your common sense on every blade you use depending on the contours of the blade.
@thestonecraftingworkshop7490 8 ай бұрын
Thank you!
@thesquarewindow2654 2 жыл бұрын
What an informative video, especially as I cannot find the spanner to loosen disc. You are an amazing teacher! Thank you!
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it was helpful!
@trekzilladmc 3 жыл бұрын
Terrific video! Probably one of the best ones I've seen on KZfaq. Most other videos are just a few minutes long and don't thoroughly explain it in the detail you have. I've always thought the same about the center metal ring. My logic is that it acts as sort of a "washer" for the retaining nut to slide against. One tip I'd like to add is if you have a habit of misplacing the spindle wrench is to drill a hole in the end of the handle and nylon zip tie it to the cord with just enough tension that it'll still slide but not slip off the end of the plug.
@thestonecraftingworkshop7490 3 жыл бұрын
Thank you for the kind comments, it is really appreciated. The tip about fixing the spanner is a good one, if only I was that organised! Thanks again!
@lenfana 2 жыл бұрын
Thank you for an excellent video, which I found to be clear and concise. The presentation is first class, and so many of my questions were answered. One particular aspect that I appreciated very much was that you didn't just say "do this", or "do it this way" and leave it at that - you also explained the reasons why. So many instructional videos and instruction leaflets tend to omit giving the reasons why a particular course of action should be taken, and pleasingly, you certainly didn't do that - the difference between being an educator and an instructor.
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you!
@Skyler-lc3in 8 ай бұрын
Very new to angle grinders. Used one, but never had one. This vid I found very educational and saved to my playlist also smashed that subscribe button
@thestonecraftingworkshop7490 8 ай бұрын
Awesome, thank you!
@pablogutierrez1009 3 жыл бұрын
Thank for a very precise, concise and informative video. You shared a lot of knowledge.
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful! Thanks for watching.
@a1bubbasmama 2 жыл бұрын
Thank you thank you thank you! I bought my 1st angle grinder and wasn’t sure how to do the blades! Now I’m confident I can!
@thestonecraftingworkshop7490 2 жыл бұрын
Glad I could help!
@annshaw6426 3 жыл бұрын
Excellent talk through-best I’ve seen yet and thanks for taking the time to do this.😊
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@denisepellew3186 Жыл бұрын
Wonderful and thanks! so happy to find this video just bought a 4 1/2 angle grinder and was getting difficulty to setup your video has help a great lot.
@thestonecraftingworkshop7490 Жыл бұрын
Glad it helped!
@robertking8087 Жыл бұрын
B. King Very informative video. Appreciate you taking the time to make it.
@thestonecraftingworkshop7490 Жыл бұрын
Glad it was helpful!
@JourneyPT 2 жыл бұрын
Thank you kind sir, I didn't use a angle grinder for 2 decades, and I really needed a reminder for the direction of the diamond discs. Best regards.
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it helped and thanks for watching, happy new year to you!
@JourneyPT 2 жыл бұрын
@@thestonecraftingworkshop7490 A happy new year full of great things for you also Sir. Have my utmost best regards.
@mozart3642 2 жыл бұрын
Excellent as ever. Followed your instructions for a foot switch: worked a treat , many thanks. Have subscribed. Regards.
@thestonecraftingworkshop7490 2 жыл бұрын
Hi, you are going to think me a bit of a dipstick but I can't remember making a video about a foot switch. I do have a home made foot switch but don't remember the vid! Anyhow thank you for the sub and I do hope you are really enjoying my videos. Cheers!
@cuebj Жыл бұрын
Excellent presentation. Just taken delivery of Makita GA9071x1 230mm. It will pay for itself in one job for daughter's new house. Was going to get a more basic 230mm grinder but decided the extra safety features warranted spending more and, as she said, still cheaper than paying a handyman. Label on Duro Diamond Blade says spin anticlockwise so - label down. Permanent marker arrow to remind me. Been using a lovely Bosch small grinder for years without knowing why I should install blade to spin clockwise or anticlockwise (label up or down). Only gripe is 110V is rarely available now. Replaced by cordless. Had to get 240V. I'm DiYer so don't have to abide by site rules but, as the saying goes, "Voltage kills, not current"
@thestonecraftingworkshop7490 Жыл бұрын
Hi, never used Duro blades, all the diamond blades I have seen have the direction arrow printed on the label side and fit label up. That said with diamond blades especially I think you can over worry about direction of spin, I have often reversed the direction of diamond blades to sharpen them up with no problem. Take care,cheers.
@BrewCityRider Жыл бұрын
Thank you sir... definitely a valuable video. I am also new to angle grinders and my main question was orientation of the flat cut-off discs. I actually decided to go with the type 27 cut off discs because they fit better inside the guard. And of course those are orientated the same as the grinding discs with the depression towards the machine.
@thestonecraftingworkshop7490 Жыл бұрын
I'm glad the video was useful, thank you for watching and good luck with your angle grinding!
@candylips3684 3 жыл бұрын
Thank you, i just brought me an angle grinder, an i learn a lot from your video
@thestonecraftingworkshop7490 3 жыл бұрын
Glad I could help, take care and enjoy angle-grinding. Thanks for watching.
@hotstick12 3 жыл бұрын
Very useful video to retain as a reference video. I'm used to chain saws, having been trained by the forestry commission but not angle grinders. Only thing I would add is treat them with the utmost respect and you'll retain all your fingers. Thank you very informative.
@michaelwilson1109 Жыл бұрын
Thank you so much! Love the sure and confident manner.
@thestonecraftingworkshop7490 Жыл бұрын
Thank you for watching.
@wqrf940 3 жыл бұрын
thanks for sharing your experiences with us man...
@thestonecraftingworkshop7490 3 жыл бұрын
My pleasure! Thanks for watching.
@arivab 2 жыл бұрын
Great Video. Informative and simple explanation.
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you!
@gavindevine956 Жыл бұрын
Thanks this really helped a first timer!
@thestonecraftingworkshop7490 Жыл бұрын
Glad it helped! Thanks for watching.
@LEE-gb4uc 3 жыл бұрын
Clear direct instruction, if only all youtube guide videos had the same common sense. Thank you very much.
@thestonecraftingworkshop7490 3 жыл бұрын
You're welcome!
@TERRYBIGGENDEN 3 жыл бұрын
This is excellent. Thanks. I especially like your demo of the different blades and their uses.. :-)
@thestonecraftingworkshop7490 3 жыл бұрын
Thank you very much!
@TERRYBIGGENDEN 3 жыл бұрын
@@thestonecraftingworkshop7490 Thats fne. It really was very helpful to me. I must see what else you are up to. :-) I;d never used a =n angle grinder before and was bait wary. :-(
@allanh4803 3 жыл бұрын
Some handy hints here Steve, thanks.
@thestonecraftingworkshop7490 3 жыл бұрын
You are welcome, thank you for watching!
@daviddurden5252 7 ай бұрын
Well done , teaching these young guns how to do it properly .
@thestonecraftingworkshop7490 6 ай бұрын
Funny thing is i think of myself as a young gun and have for decades! Thank you, cheers
@raystanczak4277 5 ай бұрын
Thanks-good basic info for us new grinder users.
@thestonecraftingworkshop7490 5 ай бұрын
Glad it was helpful!
@raystanczak4277 5 ай бұрын
@@thestonecraftingworkshop7490 It was helpful TODAYI slapped a cutting wheel on with the label out-it seems like it should go that way, for the manufacturers name to show, if nothing else-but then I checked the arrows. I had it backwards. 👍
@jeisonsanchez4842 11 ай бұрын
Thanks for this video. I bought my first angle grinder in 2016 and used it a couple of years ago to cut into a plaster wall. Super messy but it was the only tool I had that could get the job done. I used it today with the twisted wire brush wheel for some rust removal. I had the same question about which side goes up. I tried both ways and it only fit properly with the nut side down. I was really concerned about safety as I had read that the wheel can shoot out pieces of wire and debris. I’m glad I went with a face shield instead of just safety glasses because when I was done, there was a bunch of rust particles on the shield.
@thestonecraftingworkshop7490 11 ай бұрын
Brilliant point! wearing a face shield or goggles is essential and never a bad idea! thank you for making the point. Cheers PS: I would think that an anglegrinder is too fast for this task, a sander/polisher runs slower and might be safer with less debris flying about. take care.
@mudassarislam6189 Жыл бұрын
Bought my first angle grinder,,, 👍👍 excellent explanation,,, thank you 🙏
@thestonecraftingworkshop7490 Жыл бұрын
Glad it helped
@ranm1ac 11 ай бұрын
Thank you for your great instructions.
@thestonecraftingworkshop7490 11 ай бұрын
Glad it was helpful!
@mayIseeplease 2 жыл бұрын
Excellent teaching video my friend - thanks for the great advice.
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it was helpful!
@DrXarul Жыл бұрын
Well done Sir, and many thanks for this instructional video
@thestonecraftingworkshop7490 Жыл бұрын
You are very welcome, thank you for watching!
@AZ_sunshine 2 ай бұрын
Great video. Thanks for sharing your expertise! Answered all of my questions. Really appreciate you style - no yack yack yack and music. Best video on KZfaq answering the question about properly using guards and placing wheels. thanks so much. I subscribed and look forward to watching your other videos. God Bless!
@thestonecraftingworkshop7490 2 ай бұрын
Glad it was helpful!
@user-gp5pr1iw6u 2 ай бұрын
Extremely informative. Thank you.
@thestonecraftingworkshop7490 2 ай бұрын
Glad it was helpful!
@gregmccormack5709 Жыл бұрын
Thank you I feel much better about my grinder purchase
@thestonecraftingworkshop7490 Жыл бұрын
You are very welcome, thanks for watching!
@afsheenchitnis9669 Жыл бұрын
Thanks. Very useful video. It was exactly what I was looking for.😃
@thestonecraftingworkshop7490 Жыл бұрын
Glad it was helpful!
@lanta-darren 3 жыл бұрын
Thanks, this is a really useful video. Although I've used angle grinders before, I recently borrowed a friends and it didn't have the tool to unlock the locking nut. Looks like I'll be using mole grips!
@thestonecraftingworkshop7490 3 жыл бұрын
Best of luck and take care!
@asilver2889 2 жыл бұрын
Very good video. Learned a lot, and was reassured on aspects not previously fully confident on. Well explained and emphasis on cutting (rather than grinding) suited my use better. Just wished you'd had the plug on show, as I got really nervous half way through when you demoed the rotation, then moved on to swopping blades again without reminding us to confirm unplugged (or battery off). So easy to overlook.
@thestonecraftingworkshop7490 2 жыл бұрын
Unplugging an anglegrinder is a must when changing blades, or taking the battery out on cordless. Thanks for the reminder! Cheers!
@ennismccaffrey3227 3 жыл бұрын
Thank you so much for this informative video!
@thestonecraftingworkshop7490 3 жыл бұрын
You are so welcome! At the risk of sounding like an old nag, please wear goggles when using your anglegrinder, cheers!
@fredreed7202 2 жыл бұрын
GREAT TUTORIAL VIDEO!!!!
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you! Cheers!
@robp4711 3 жыл бұрын
Very good, sir. I know how to use one but had no idea how to change the disc
@thestonecraftingworkshop7490 3 жыл бұрын
Glad I could help, thank you for watching.
@herz888last4 Жыл бұрын
Superb presentation!!!
@thestonecraftingworkshop7490 Жыл бұрын
Thank you! Cheers!
@vishaldileep8944 2 жыл бұрын
Sir thank you for making this video your information was useful for me and hope for everyone also your experience helped us too learn so many new things
@thestonecraftingworkshop7490 2 жыл бұрын
It's my pleasure, thank you for the kind comments.
@darrellm 2 жыл бұрын
Thanks so much for the terrific video. Darrell - South Dakota, USA
@thestonecraftingworkshop7490 2 жыл бұрын
Glad you enjoyed it!
@Yevgen6R Жыл бұрын
Thank you for the tutorial!
@thestonecraftingworkshop7490 Жыл бұрын
My pleasure!
@danielmabuya7070 Жыл бұрын
Thank you for your excellent presentation. I am one of those experts that is so good in loosening the screws to dissemble any type of machine, but bad in assembling or connecting back the same machine.
@thestonecraftingworkshop7490 Жыл бұрын
Yes, I usually have one screw left over😊
@piratedprivacy9052 2 жыл бұрын
Great video Sir, but I've been told by many manufacturers that for Abrasive Slicing Discs that only has a RingSide (support washer), it shall ALWAYS be PRIORITISED to Face Towards the Backing-Flange (that is recessed upwards as standard) and thus the Non-Recessed(FLAT) Locking-Flange that will be screwed/pressed against the Abrasive Side DOESN'T Require the RingSide (support washer). They further explained that ALL ATTACHMENT including Abasive Slicing Disc that will 'meet/face' that 'recessed Backing-Flange' MUST BE RIGID. That is why a RingSide (support washer) is designed on every Abrasive Slicing Disc. Its to be Used AGAINST that Backing-Flange. All other attachment such as Diamond Blade/Multi-Disc etc which is ALREADY RIGID Both Sides have no such issues and are to follow their Arrow of Rotation instead. Hope this information helps...🙏
@thestonecraftingworkshop7490 2 жыл бұрын
I hope this helps as well! Thanks for the input.
@piratedprivacy9052 2 жыл бұрын
The Stone Crafting Workshop 👍👌
@marvellstarks2434 Жыл бұрын
I learned everything I needed and more on this video
@thestonecraftingworkshop7490 Жыл бұрын
Thank you for watching!
@carlos822m 3 жыл бұрын
Great Video, I like your voice! I had a feeling that I have been using my diamond disk the wrong way. It’s because of the flat cutting wheels I use it with the label up (or down when you are putting them) because I grind with them a little and soft (no that much pressure). Thank you.
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it helped!
@amadoacupan609 4 ай бұрын
Very well presented. Thank you.
@thestonecraftingworkshop7490 4 ай бұрын
You're very welcome!
@nazimzahir3061 3 жыл бұрын
Thank you for the video, great for a beginner like me
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@iffetorbay6356 2 жыл бұрын
Excellent video! I share all the appreciations expressed in comments below! Thank you so much!
@thestonecraftingworkshop7490 2 жыл бұрын
Thank you!
@timklassen421 Жыл бұрын
Great tips thankyou for sharing your knowledge with us youtubers.
@thestonecraftingworkshop7490 Жыл бұрын
You are very welcome, thank you for watching.
@geraldmethven8478 2 жыл бұрын
excellent video very clear and informative. Thanks
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it was helpful!
@laserbeam002 Жыл бұрын
I really appreciate you posting this vid. I bought a cordless Ryobi 18V grinder today. I have never owned one before. When I got it home and opened the box I found it didn't come with a battery, charger OR spanner wrench. Ok, I should have known to ask about those things but I didn't. Anyway, I went back to the store and got the charger and battery, a 4 amp. As for the wrench I'll use my vice grips for a while and get the wrench off amazon. Thank you for the info. I wasn't sure which way to turn the blades.
@thestonecraftingworkshop7490 Жыл бұрын
glad it was helpful, thanks for watching
@elyanae9588 3 жыл бұрын
Also - a great, easy way to make an angle grinder spanner that fits all; take an old adjustable spanner, drill holes the same size as the holes in your grinder locking nut, through each jaw of the adjustable spanner. Find some nuts and bolts that fit your grinder nut, and bolt them into the holes you've drilled into your old adjustable spanner. This way you always have a grinder spanner that will adjust to any size grinder. :) I've had and used my home made one for the past 15 years.
@thestonecraftingworkshop7490 3 жыл бұрын
Great tip! Thanks for the input, it is much appreciated!
@elyanae9588 3 жыл бұрын
@@thestonecraftingworkshop7490 no problem. It's a great tool to make to throw in the tool box. You'll never struggle to open a locking nut again! :)
@roberthancock840 3 жыл бұрын
At last a really great video relating to angle grinder discs, you answered so many conflicting issues relating to which way, best I've seen yet. Many thanks. 👍
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@pabitramohangayan1482 3 жыл бұрын
I am in a great tuition. I have learnt much. Thanks sir for bit by bit description about use of different blades. Jay Shree Ram
@thestonecraftingworkshop7490 3 жыл бұрын
It's my pleasure, Thank you for watching.
@babyboo3236 3 жыл бұрын
Excellent tutorial, thank you 🤔😀
@thestonecraftingworkshop7490 3 жыл бұрын
You’re welcome 😊
@kak_smog 3 жыл бұрын
Thank you very much!!! It is a very useful information for me!
@thestonecraftingworkshop7490 3 жыл бұрын
You are welcome! Thanks for watching.
@jonathanpruitt7393 Жыл бұрын
Enjoyed the video, thank you!
@thestonecraftingworkshop7490 Жыл бұрын
Glad you enjoyed it!
@melvis2017 Жыл бұрын
U are a great teacher thanks for sharing with us this video appreciations 🇩🇰👍
@thestonecraftingworkshop7490 Жыл бұрын
It's my pleasure
@beddupalu 3 жыл бұрын
Very useful, thank you very much!
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it was helpful!
@barrygray8356 Жыл бұрын
Great stuff. Thank You Sir!
@thestonecraftingworkshop7490 Жыл бұрын
My pleasure!
@zastorlexa9800 Жыл бұрын
Very good video. Informative & clear. Thank you for posting. :-)
@thestonecraftingworkshop7490 Жыл бұрын
Glad it was helpful!
@elyanae9588 3 жыл бұрын
The parkside range of tools are awesome, for their prices! I have a whole range of different parkside power tools all powered by the same 20v batteries I have.
@thestonecraftingworkshop7490 3 жыл бұрын
I think they are probably the best budget tools around. Thanks for watching.
@elyanae9588 3 жыл бұрын
@@thestonecraftingworkshop7490 I agree. 💯.
@reaper060670 2 ай бұрын
i JUST BOUGHT 2 MORE aNGLE GRINDERS AND i ALWAYS LEAVE THE BLAde with the label not showing. It works for me but I'm not sure if it's correct. I have 3 grinders now but I do regret not buying a 230mm one.. I do a bit of metalwork now more so than anything else so to have 3 is a godsend bcos now I can work faster and not have to keep changing blades to flaps, etc. Thanks for the content my man. Always very informative..
@thestonecraftingworkshop7490 2 ай бұрын
Thanks for the comments, label up or label down is really not critical, even on diamond blades I often turn them the "wrong" way when they lose their cutting edge and they start to work again! Glad you are enjoying your anglegrinders, they are my favourite tool though I don't have so much use for them nowadays. Take care!
@guybonfiglio5899 Жыл бұрын
Thank you. Question answered in 2min. I guess I won’t try something stupid today.
@thestonecraftingworkshop7490 Жыл бұрын
Thanks for watching!
@jameskoiman 2 жыл бұрын
You are a very smart English gentleman and so am I thank you for this info i will subscribe to your channel brother ...oh by the way i was born in the USA English descent .Thank you again
@thestonecraftingworkshop7490 2 жыл бұрын
Thanks for the sub and the kind comments! Welcome!
@mss390 3 жыл бұрын
Thanks and well explained subject.
@thestonecraftingworkshop7490 3 жыл бұрын
You're welcome
@alexjoacabine1101 6 ай бұрын
Thank you very much for the information sir! :)
@thestonecraftingworkshop7490 6 ай бұрын
Most welcome!
@Bull1the1Great 6 ай бұрын
Really nice and helpful . Much obliged...
@thestonecraftingworkshop7490 6 ай бұрын
You are very welcome, thanks for watching.
@timwilcox960 3 жыл бұрын
Clear and comprehensive - good job. Having just bought a new Makita angle grinder, I've watched three videos prior to yours and none of them address which way the blade/disc should be fitted. One even said: 'be sure to put it on the right way' - without any explanation as to which way the 'right way' is! :-) Having fitted an Abracs diamond blade, I assumed (correctly) that it had to rotate in the direction of the arrow on the label. However, I noticed there was a lot of play in the blade left to right, which would make accurate cuts impossible. After watching your vid', I realised I'd put the locking nut on the wrong way around (but the right way had I fitted the 6mm matal grinding disc supplied with the machine). Having flipped it over, the blade is now tight without any play at all. So, thank you kind sir! :-)
@thestonecraftingworkshop7490 3 жыл бұрын
You are welcome, that is an easy mistake to make, I have done it myself. Thanks for watching.
@atlantisboliviaorg 3 жыл бұрын
Thanks for a very comprehensive video. Just bought a Powerplus 500 watt angle grinder and so far unable to undo the locking nut in order to mount the disc!
@thestonecraftingworkshop7490 3 жыл бұрын
Glad it helped, hope the blade is free now! Thank you for watching.
@barrycarruthers 2 жыл бұрын
Great vid, very useful, thanks👍
@thestonecraftingworkshop7490 2 жыл бұрын
Glad it was helpful! Cheers
@MrKingsleyK 3 жыл бұрын
I just bought a new grinder and I am having trouble removing the locking nut. It turns out I have a wrong size for the unlocking key. Even though you advice of using getting the bolt loose seem practical, my bolt is solidly stuck in place. Your advice for not tightning the locking will be used next time. Thank you for your expertise.
@thestonecraftingworkshop7490 3 жыл бұрын
Hi, if you can fit just one of the lugs on the key wrench into a hole in the nut the other lug will seat onto the rim of the nut and can be used that way (does this make sense?) The main reason nuts get locked on is when the blade is not tightened enough in the first place, the machine when started spins the blade into the locked position too hard. best of luck with this.
@alexandregoncalves4414 9 ай бұрын
Great video! Thanks!
@thestonecraftingworkshop7490 9 ай бұрын
Glad you liked it!
King of Homemade
Рет қаралды 15 МЛН
Lawn Care Business Success
Рет қаралды 43 М.
🍓Strawberry Abby🍓
Рет қаралды 12 МЛН
🍓Strawberry Abby🍓
Рет қаралды 12 МЛН
BabyVK®
Рет қаралды 17 МЛН