Sprinter Rust Proofing | Sealing Up The Side Trims

No video

Sprinter Rust Proofing | Sealing Up The Side Trims - An Essential Job

Рет қаралды 25,907

Күн бұрын

Join our van build extraordinaire email club here: bit.ly/3Apcz0r
Show your support by buying us a beer here: bit.ly/3bX58UE
________________________________________________________________________________
Hey! James & Sarah back with the latest in our van build series. In this episode we’re in rust prevention mode & are rust proofing the biggest rust prone area of our van.
It’s a design flaw of both Mercedes Sprinters & VW Crafters that there’s places underneath the plastic side trims where water can get in and cause the sills of the van to rust.
Therefore sealing up your Crafter or Sprinter side trims really is a must for any van conversion. Watch on to see how we tackled ours & treated the bits of rust we found underneath.
Thanks for watching! If you found this episode interesting don’t forget to smash the thumbs up & hit subscribe so you never miss an episode.
Catch you in the comments!
-----------------------------------------------------------------------------------------------------------------------
Here’s a list of the trim tools and sealant we use in the video:
Trim Removal Kit: amzn.to/3q2SS62
Sikaflex Sealant: amzn.to/314N1D2
P.s. These are affiliate links, so if you buy through them we may earn a small commission from the seller. It’s at no extra cost to you so is a lovely way to say thanks if you found the video helpful.
Subscribe to our KZfaq Channel: bit.ly/32ZTD67
Follow our daily updates on Instagram: bit.ly/2ypQsXw
Visit our website: thewholeworldo...
Full van tour video: bit.ly/3dVYWei
Full van conversion series: bit.ly/3dRSSDl
Work with us: hello@thewholeworldornothing.com

Пікірлер: 61

@rebeccalouisealpine 2 жыл бұрын

Guys awesome video. Regarding those black clips you were fighting, in case you haven't already sussed them out, the tiny little circular insert you can see in the middle of the "head" of the clip, you (gently) push that deeper into the clip, (so in towards the van body if that makes sense..don't go too hard though as the pin will fall out the back), once you've pushed the pin back, the trim tool you were using will work. You'll see the pin is completely removable so that you can reinstall. You probably already encountered this but..in case you haven't, now you know :) The pin is what splays the rear of the clip out and holds it in place.

@Nephtys80 2 жыл бұрын

This series is so incredibly helpful! I watched it and many others while planning for our build, but now we’re actually working on it (just about to remove the side trim :) ), yours is the one I keep coming back to. Thank you so much!

@TheWholeWorldorNothing 2 жыл бұрын

Ah thank you, we’re so glad you’ve found it helpful and that’s really lovely of you to say. Good luck with the build!

@kevinfloyd6837 3 жыл бұрын

Thank you for your excellent vlog. I had to the same to my mwb sprinter today. The tools you recommended did the job perfectly. The mistake you made in not removing the rear corner trims was for me a lesson remembered. So much learned as a result of your vlog. A big grateful thank you.

@TheWholeWorldorNothing 3 жыл бұрын

Great to hear that you found it useful and it’s really nice of you to let us know too. That’s exactly why we try to include our mistakes as well, they’re probably more useful than anything else! Thanks again 😀

@soniaaurore3619 3 жыл бұрын

Again thanks for the tips and video! I collected a full bucket of water after unclothed the "pipe" I have a built-up of moisture in the lower part of the van no apparent liking what so ever it's coming from the bottom! Very helpful 👍👍👍👍

@TheWholeWorldorNothing 3 жыл бұрын

No problem! We’re so happy you found it helpful 👍😀

@leedobson7531 Жыл бұрын

Just starting a sprinter conversation and following you guy! Your both amazing!! Thanks!!

@marcinkochanowski2955 3 жыл бұрын

Absolutely fantastic video, as we bough our Sprinter recently, we will definitely look to take out all the trims, fight the rust and use the sealant. Very helpful, thank you guys 👍

@TheWholeWorldorNothing 3 жыл бұрын

Great stuff! Yes it’s a vital step to protect from rust. Good luck with your build 😀

@johncunnane1582 Жыл бұрын

very informative and interesting. I don't even have a van, but is great to find out about this!

@johntauxe 10 ай бұрын

When you refinish that bit of rust you found (at 3:43 et seq.), you really need to sand it all the way down to bare metal, much farther than you did. That rust will be back. Once down to bare metal, treat the metal with some Ospho or other phosphoric acid solution intended for the purpose. This will reduce any remaining iron oxide to iron phosphate. Then paint over that with some zinc primer, and only then put on your white top coat. Other than that, thanks much for showing how to remove these flashy but annoying panels. Mine fill with dirt and dust all the time, and I see now that simply flushing them with water will not solve the real problem. Mercedes really should have done better on this.

@AMGMANIAC 3 жыл бұрын

Hope you don't mind me offering some helpful advice regarding the rust spot. After clearing as much flaky paint as possible you should add some Kurust before adding the Hammerite. It turns rusty metal solid. It's well worth the extra step.

@TheWholeWorldorNothing 3 жыл бұрын

No we really appreciate it. We’ve got a couple of new rust spots that we need to treat so will definitely get some of that stuff. We hadn’t heard of it before and the hammerite alone hasn’t done as good a job as we thought it would. Thank you for the tip 🙏

@AMGMANIAC 3 жыл бұрын

@@TheWholeWorldorNothing Glad to give something back for all the tips I've picked up from watching you guys. Kurust is actually made by Hammerite so working in conjunction with the paint it will give much better protection. Did you remove the trim inside the back doors? That will have a ton of dirt under it.

@TheWholeWorldorNothing 3 жыл бұрын

Ah that makes sense then, we’re just waiting for some decent weather then we’re going to get some of that stuff and do some extra rust proofing. Yeah we removed that trim, you’re right there was tonnes of grime! It’s amazing the places the dirt gets into.

@chrism9549 3 жыл бұрын

That is so cooooool.. Not interested in a vanbuild, but it's so great to watch.. Thank you.👍🏾

@TheWholeWorldorNothing 3 жыл бұрын

Glad you’re enjoying it! Can’t blame you for not being interested in doing one either, it was a lot harder than we ever imagined 😆

@chrism9549 3 жыл бұрын

@@TheWholeWorldorNothing Absolutely. But thank you.!

@TheWholeWorldorNothing 3 жыл бұрын

No problem! 😀

@ianbonnypitlad397 9 ай бұрын

Very helpful, I couldn’t understand where the moisture was coming from, It has started corroding on my 2017 model, hopefully I’ve caught it in time. Thankyou

@TheWholeWorldorNothing 9 ай бұрын

Glad it helped, good luck with it 😀

@DavidJohnston58 3 жыл бұрын

A timely intervention! Nearside worse due to pickup of more salt etc on verges. Proper van!

@TheWholeWorldorNothing 3 жыл бұрын

Ah right! That will explain it then. We did wonder about that 😀

@dennishenz Жыл бұрын

Those bumper clips at the back are push pin clips. You push the little pins in the middle in first then you can pull the clip out. You probably figured this out now 🤘🏽

@6079__Smith__W Жыл бұрын

I wish my mrs was as useful. This one is a keeper

@dhyanalevy2802 3 жыл бұрын

Fantastic video 🙌🏽

@TheWholeWorldorNothing 3 жыл бұрын

Ah thank you 😊

@nancydurrett9319 3 жыл бұрын

Thanks for the info, I’m looking for a van to buy to convert and this is very helpful.

@TheWholeWorldorNothing 3 жыл бұрын

No problems! This is a very well known problem with sprinter vans if that’s the make you’re looking at and one of the first things everyone says to address 👍

@zulustu8214 Жыл бұрын

The issues were having with the rear panel is that you push the inner pin.. (can slightly see the outline) push that in and it releases from the rear

@TheWholeWorldorNothing Жыл бұрын

👍

@rayray2613 3 жыл бұрын

So amazing guys

@TheWholeWorldorNothing 3 жыл бұрын

Thanks! 😀

@seanmcalister1393 3 жыл бұрын

Great video!!! 🤟🤟🙌🙌🙌

@TheWholeWorldorNothing 3 жыл бұрын

Thanks bro 😀

@johndavey7345 3 жыл бұрын

Nice tips, I have a sprinter arriving in a month or so, will check this out!

@TheWholeWorldorNothing 3 жыл бұрын

Yes definitely take a look at the sills! Especially if it’s a second hand older one. 👍

@johndavey7345 3 жыл бұрын

@@TheWholeWorldorNothing its a 2016, I have plenty of experience of rust being the proud owner of a Transit! It might be nice to Raptor paint the trim when its off. Very impressed by the methodical approach with your build, I am very much of the 'unscrew random things' way of thinking.

@TheWholeWorldorNothing 3 жыл бұрын

Similar year to our 2015 then so hopefully you won’t find anything too bad lurking under there! Not heard of raptor paint but assuming it’s some sort of protective paint - top idea, might have done that ourselves if we’d known about it. Haha yeah there were plenty of times during the build we took that approach 😀

@citylockapolytechnikeyllcc7936 3 ай бұрын

Great video, but please consider or test and report your own experience. Butyl rubber makes a better seal than silicone. This is that same tenacious stuff you find holding plastic vapor barriers onto door panels. It never dries out, and is not time-sensitive as silicone glue.

@GOLDVIOLINbowofdeath 2 жыл бұрын

Interesting half way in and the only tiny rust spot is located where it could not have been caused by the factory holes for the plastic

@mercedesbenz9956 2 жыл бұрын

Every sprinter should havd come with a free mig welder

@dagmarvh164 3 жыл бұрын

Gracias por la información no sabía que podía entrar el agua por hay saludos 🇨🇺

@TheWholeWorldorNothing 3 жыл бұрын

¡Sí! Es muy común y un gran problema 👍

@barrycannon1714 11 ай бұрын

Did you seal the hard to remove (you used the back of a hammer!) black parts from the back bumper, when you put it back in? Or just the white clips from side trim?

@nela5596 Жыл бұрын

Great video Can you tell me where I can buy some of those clips, thanks!

@Ellie-yy7mh Жыл бұрын

Heya thanks for this video, where exactly do I put the sealant on the plastic clips though? In a circle around the poppy out bits? Please let me know asap if poss!

@LiviusMaximus 2 жыл бұрын

08:50 push the middle thing in.

@michaeljamesdesign Жыл бұрын

Does anyone know whether the rear panels (the ones behind the rear wheels) needs any welding when they're replaced?

@gereshomeE 3 жыл бұрын

Have they addressed this now on the new Sprinters? All the best? ☺

@TheWholeWorldorNothing 3 жыл бұрын

Great question. And we haven’t got a clue unfortunately! But it’s doubtful since it’s been a well known issue for many years and they’ve not bothered to remedy it!

@gereshomeE 3 жыл бұрын

@@TheWholeWorldorNothing Thank you for replying! ☺ I have contacted Mercedes SO MANY times and they will not answer me in this. I heard from others to Hammerite the underneath and A&B columns, once a year! My father is Jamaican and mother was English. I can see the resemblanse! ☺ God bless you and your travels!

@TheWholeWorldorNothing 3 жыл бұрын

No problem! Sorry we can’t be of more help, it’s not something we’ve ever researched actually because we only looked into our specific model. My mum’s from Grenada and my dads from England so other way round 😀 And we actually need to do some more work underneath the trim this summer because we’ve had a rust spot develop again - once a year is probably about right 👍🏾

@gereshomeE 3 жыл бұрын

@@TheWholeWorldorNothing Oh, well done! ☺ I've never been to the Caribbean but have ALWAYS felt so proud even though I never knew my birth parents; I ☺ God is my Father now! God bless you both and happy furure trips!

@tospicy4ya 3 жыл бұрын

Wow was that really all the water that was in or did u pour it in for the video 😂😂

@TheWholeWorldorNothing 3 жыл бұрын

Haha, it was all in there! But we had just had about a week of torrential rain so it had plenty of opportunity to fill itself up 🤣 Yorkshire summers eh!

@tospicy4ya 3 жыл бұрын

@@TheWholeWorldorNothing from Sheffield I know 😂😂good videos 👌🏼

@TheWholeWorldorNothing 3 жыл бұрын

Yeah you’ll understand then! Thank you 😊

@krzysiekwyroba7010 Жыл бұрын

Sprinter , could be great van but RUST.... better sell it out untill is too late and take one of Master/Movano /Peugeot/Citroen which has galvanised body...