They really don't make them like they used to!

Рет қаралды 21,731

3 жыл бұрын

No really, they don't... We hear this all of the time, but at the end of the day, it's true. Here's why.
Patreons vote on the cars to buy for future episodes - / worthlesswhips
Or support us here - paypal.me/worthlesswhips
Spotify playlist of the tunes I listen to while working on the car - open.spotify.com/playlist/4i0...
*Cameras/Mics*
Sony a73
amzn.to/37YMTXk
Sony Handycam
amzn.to/35OgHV2
Go Pro
amzn.to/38hAldV
Zoom H1 Handy Recorder
amzn.to/30iKtjG
Rode Smart Lav+
amzn.to/36UKdKe
DJI Mavic Air (our daily drone cheaper)
amzn.to/2RnRdc5
DJI Mavic 2 (Drone) the nice expensive one
amzn.to/2tXY57W
Manfrotto Befree Tripod
amzn.to/38aXvTa
Sony 24-70 f/4 lens for a73
amzn.to/2sxfST6
Disclaimer:
Due to factors beyond the control of Worthless Whips, we cannot guarantee against improper use or unauthorized modifications of this information. Worthless Whips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Worthless Whips recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Worthless Whips, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Worthless Whips.
◘ Music Produced By
BigBadBeats - www.bigbadbeats.net
Song - BigBadBeats - Nightcall
• (FREE) 80's Type Beat ...
Song - Rider
• (FREE) 80's Type Beat ...
◘ Music Produced By
BigBadBeats - www.bigbadbeats.net
Song - BigBadBeats - Dark Trap Soul Type Beat "Lost" - 6lack Hip Hop Instrumental
• (FREE) Dark Trap Soul ...
Song - Rider
• (FREE) 80's Type Beat ...
◘ Music Produced By
BigBadBeats - www.bigbadbeats.net
Song - BigBadBeats - Dark Trap Soul Type Beat "Lost" - 6lack Hip Hop Instrumental
• (FREE) Dark Trap Soul ...
Song - Rider
kzfaq.info/get/bejne/sL1lq8Z2s9OqZJ-b.htmlttps://y...

Пікірлер: 387

@WorthlessWhips 3 жыл бұрын

Patreons vote on the cars to buy for future episodes - www.patreon.com/worthlesswhips Or support us here - paypal.me/worthlesswhips

@joaobaptista8377 3 жыл бұрын

How Many BHP btw

@pgtmr2713 3 жыл бұрын

Little secret. Sometimes they want you to pay even more for performance parts. That is parts that are not O.E./new replacements, but better parts. That car should be at least LS swapped with a T-56 with aftermarket axles, suspension, brakes. All at ridiculous prices.

@jpsulisz 3 жыл бұрын

The Patreon link leads me to a 404

@bkip20002 3 жыл бұрын

Born and raised in Detroit. Was a UAW member for 10 years... and then I purchased a 1985 Dodge... was amazed at the distinctly superior quality over previously owned vehicles... and then I was shocked to find out it was actually made by a Japanese company. No wonder the U.S. auto industry went bankrupt when it did.

@4xHitler 3 жыл бұрын

basically japanese are the german ingeneers of the new world. or maybe the old world cause owning an older japanese car is more of a safe bet

@deusexaethera 3 жыл бұрын

@@4xHitler: Nah, Japanese engineers are superior to German engineers. German engineers can make things extremely intricate and precise, but can't be bothered to test their products outside of the laboratory -- real-world conditions would require overbuilding components, which would reduce their peak efficiency, and that's just totally unacceptable to German engineers. That's why German cars driven outside of Germany require so much additional maintenance -- German engineers design German cars to work well on immaculate German roads, and don't care that their products get beaten to death very quickly elsewhere in the world.

@4xHitler 3 жыл бұрын

@@deusexaethera it's great to hear that from you since german car companys build most their cars at every other place except germany you get a lot of trashy poorly produced vehicles despite quality control. also there are many other factors which make car factorys produce worse products today than back in the days (one of them being the top down hierarchy where stupid "engineers" make wrong decisions on many aspects to reach the marketing strategy (lightweight, efficient, cheaper materials). your point is very much valid so I take back my say on german engineerinh

@siliconinsect 3 жыл бұрын

Nice. I personally have owned five J-body GMs (Cavalier, Sunbird, etc) and they were reliable crap. EVERYHTING except what was necessary to move the car broke. After repeating this with five mid-90's Toyotas (some made in US) the quality isn't that much better. Door handles and plastic parts break but it'll never leave you stranded.

@junkman6456 3 жыл бұрын

Through the last decade German auto builders have moved their quality control to the USA and financial controlling to China. Do junk quality by weird management. That's a joke now. Much earlier, German cars were better but you had to pay extra cash for each extra part of equipment. Just as it is normal in a market economy. And the Japanese, the Japanese, have always built their cars mostly only with robots, which of course omits human error.

@jbbuzzable 3 жыл бұрын

Those tanks are ridiculous. It's like 'what should we fill this space with?'

@IndependenceCityMotoring 3 жыл бұрын

I've had the same quality problems with many car brands of that era...

@bigjoeangel 3 жыл бұрын

I worked on my GM car this evening and had some success! I fixed the window motor on my 2008 Saab 93.

@davidcady7194 3 жыл бұрын

And where is SAAB now?

@bigjoeangel 3 жыл бұрын

@@davidcady7194 Try typing the word SAAB into Google. Glad I could be of service.

@davidcady7194 3 жыл бұрын

@@bigjoeangel I did and it shows that SAAB as an automotive company dissolved in 2012. I was never disparaging SAAB. I was implying that under the "great" management of GM the company failed. They attempted to have a Chinese consortium purchase them but that was blocked by GM. Who in turn solid technology rights for SAAB to a Chinese company. So at this time the remnants of SAAB is called NEVS which manufactures an electric car based on the SAAB 9-3. Also SAAB AB still exists in the military aerospace industry. GM never got their hands into that part of SAAB.

@teamdrivealot8441 3 жыл бұрын

That eagle sound in the begining 😆🤟

@tiborklein5349 3 жыл бұрын

The funny thing is that it's actually a red-tailed hawk. Look it up.

@studibakre 3 жыл бұрын

it's a chicken! a screaming chicken. ;)

@remotecontroll1 3 жыл бұрын

Lol it was perfect!

@therealboofighter 3 жыл бұрын

It’s a Firebird.

@F2007KR 3 жыл бұрын

I had a 1987 Firebird, I experienced all of this. My distributor was junk, the replacement was junk. The ignition cylinder was junk. The radiator was junk. The interior panels were junk. The engine and transmission themselves were great, but literally everything else around it was complete junk. And yet I still miss it.

@motodigitalvideo 3 жыл бұрын

That was some pretty specific advice at the end about shipping your car to a small island! I must have missed the additional context for that one. 😂

@puggsincyberspace 3 жыл бұрын

You need to listen to what he says at the end, some it so out of the ballpark and funny. Go check the other ones he does at the end.

@nate_d376 3 жыл бұрын

I had a 70 Chevelle long ago (wish I still had it) and the quality was miles better than the 80s GMs.

@troy3456789 3 жыл бұрын

They had the wrong idea. They believe if you build them reliably, people won't replace them as often. They're pulling Apple Inc. tricks; and their engineering focuses on specific failure points in a time period, with the only option to replace at exorbitant cost.

@troy3456789 3 жыл бұрын

They are now built to sell; not to own or drive for very long at all.

@treetheodore6906 3 жыл бұрын

Polish & welds look beautiful! Great job in 🇺🇸.

@williamswenson5315 3 жыл бұрын

Probably expensive, but worth every penny.

@garylanzarone5842 3 жыл бұрын

A great deal of production vehicles after the early 80s were riding the reputation rather than delivering quality. Real nice attention to details Winston. Stay awesome. Still working on transporting motor for you.

@stephenobrien1597 3 жыл бұрын

I had a 91 camaro rs so I feel you pain. Went through 14 alternators in a year. Best thing I ever did was pull that 180 hp 305 boat anchor with a 5 speed and swapped in an LS1 with a t56 6speed. This was late 90's.

@troy3456789 3 жыл бұрын

>Went through 14 alternators in a year. wut...

@williamswenson5315 3 жыл бұрын

How many times did the driver's side interior door handle come off while you were closing the door? Four times on my brother's new 90's Camaro. Build quality was terrible.

@stephenobrien1597 3 жыл бұрын

@@williamswenson5315 Weirdly that actually never broke on mine. But the normal starter, alt, and fuel pump gremlins did bite me.

@stephenobrien1597 3 жыл бұрын

@@troy3456789 Yup, and GM in their infinite wisdom used 3 completely different bolts to mount it. Original one died and I think it was more of an auto zone problem with the replacements than anything else. They finally got tired of me coming in for warranty replacement and just gave me a new AC Delco alt.

@williamswenson5315 3 жыл бұрын

@@stephenobrien1597 Yeah, the first time I drove it, I was left with it in my hand. It was an awkward moment when I returned his keys and the handle together. Two weeks later, the same thing happened to him which resulted in a similar awkward apology for being upset and angry. That car was a real conversation starter; if nothing else.

@finsterclause7184 3 жыл бұрын

In 1984 my buddies Dad bought a new Z28 we were 17. How we managed not to kill ourselves still shocks me.

@grabasandwich 3 жыл бұрын

Barely enough horsepower to move that heap 😆

@ivanmarkovicxxx 3 жыл бұрын

Check your alternator output. I once went through 5 ignition modules inside the distributor on my 2nd gen TA, due to an alternator overcharging the system due to a stuck, internal voltage regulator.

@perrygoll6800 3 жыл бұрын

Always love the updates on your proud birds and also "telling it like it is"...they were junk, but lovable junkers!!!! More power, more updates!!!

@edmcwilliams6524 3 жыл бұрын

Winston Thank You For The Great Video.

@ChrisLincolnHomes 3 жыл бұрын

I loved my 88 Formula 350. It had it's issues but it screamed. My ignition control module also failed but it was because of wires that attached to it in the distributor. They had corroded off.

@dontspamrob 3 жыл бұрын

those containers are gigantic

@troy3456789 3 жыл бұрын

That was my first reaction to seeing them too.

@williamswenson5315 3 жыл бұрын

Golden Corral size.

@presidentpoopypants1448 3 жыл бұрын

That's what she said....

@jakeclauson9863 3 жыл бұрын

Believe it or not new cars, BRAND NEW cars have lots of issues. Components, electronics and even rust happens on brand new cars way more often than you would believe

@HPTBANDIT 3 жыл бұрын

I drove an 86 Trans am for three years of my four years in college. I picked it up with 114k miles. I won’t lie, I beat the crap out of that car and it returned the favor in broken parts. I replaced everything in 3 years except the motor and transmission. Parts like the alternator, brakes, and starter, I replace them every 6 months. I had an autozone lifetime warranty on most of the parts. I had no idea it meant I had to replace them for a lifetime. Around 190k miles, the transmission started grinding in reverse. I started looking for another car. I didn’t want another f-body after the stuff I went thru with the TA. Just my luck, the only thing I found worth buying was a 88 Formula with 87k miles. I didn’t want to buy it but I was desperate. It ended up being one of the best cars I ever owned. I only had to replace the starter and fuel pump over 4 years.

@LeaveNoTrashBehind 2 жыл бұрын

I guess I am subscribed to your car channel, I recently just found your other channel. Good stuff man. Not alot lot people these days wanna expose the truth, they're too concerned about getting shut down/cancelled. And I have 1994 Pontiac Firebird Formula, it's such an amazing car. I really like the 70s/80s Firebirds, you're right they don't make it how they use too. Stay awesome! 🤙🙂

@armyof100clowns6 3 жыл бұрын

There was a serious lack of quality in American built cars for a long, long run. A lot of really cool and iconic designs, but damn, what a bunch of dogs. As usual, great video! 🤘🏻

@troy3456789 3 жыл бұрын

Many now have Chevy or GM on them, and they're not made in the USA anymore either (not that that was helpful in the late 70s, 80s, and 90s then anyway).

@jbbuzzable 3 жыл бұрын

@@troy3456789 Japan kicked Detroit's ass to the curb during that time. What a shame.

@troy3456789 3 жыл бұрын

@@jbbuzzable When American cars were made in Detroit they were actually not as horrible as they are now. In fact, Detroit itself wasn't as horrible as it is now. Detroit is the most dangerous city in the USA now, and Chevy & Chrysler Fiat & Jeep are all terrible.

@troy3456789 3 жыл бұрын

@@jbbuzzable The early to mid 70s was basically the end of American greatness in most cars. Now, GM is only concerned with its stock prices; not the reliability of its vehicles. *Its job is to do a great job of selling them; not engineering them & building them*

@jbbuzzable 3 жыл бұрын

@@troy3456789 In my opinion, it started when the US carmakers ignored the quality philosophy of Demming, and he went to Japan. They ran with it. The overzealous union and corporate greed at the time just added to the fire, creating the perfect storm. The Big 3 ignored all of the warning signs. It took them 20 or 30 years to catch on, but the damage had pretty much already been done.

@ryanmacewen511 3 жыл бұрын

You bring up a very good point! lol. I refer to it as GM electrics of the 80's. Every time I fixed something I thought it was DONE. Then I realized nearly everything was being replaced or TLC tinkered with at least every 2-3 years. Relays, Switches, etc. Window switches, mirror switches. With connector pins as wide as pencil erasers, you'd think they'd be robust. lol. I think that's why I have 3 Audi A6's now from 2005-2008. Audi's are very frustrating at times to service, but the repairs are pretty rare. 80's GM quality was pretty sketchy in a lot of areas. Some of it though, can be spruced up a bit. The saving grace of the third gen is that parts are typically inexpensive. I do love them. I love the immediate turn in (at least on mine), and the design aesthetics, at least on the GTA. I will own one as long as I can. ;)

@judosailor610 3 жыл бұрын

Those pesky mountain bandits! Haha.

@m4_patriot374 4 ай бұрын

My dream car (it changes daily) is a 3rd gen camaro, basically your car and I am mentally prepared for breaking the cheap plastic on the interior and having to spend a little here and there for new ones.

@questionmark4348 3 жыл бұрын

I once talked to a guy who was looking to have parts made in China. He said he was told flat out by his Chinese contact that he could build to what ever specs he wanted. He could have cheap parts or very high quality parts he just needed to pick his price point. My point is, sometimes it's the supplier that chooses to source cheap parts. I wish I new how many parts are exactly the same from the same factory just re-boxed with some priced expensive some priced cheap. I'm in the process of looking for replacement factory looking headlights for my 2000 GMC truck....dammed if I can figure out which are the best quality for a reasonable price. I don't even know if OEM are any better or just re-boxed Chinese parts.

@NinjaRunningWild 2 жыл бұрын

Oh man, I have an 89 Trans Am GTA 5.7l with 84k original miles in _excellent_ condition & _every year_ I have to fix or replace _something!_ Now I have a cracked flywheel I need to replace this summer before it can be driven again, so I completely hear you. What that guy said I think he just means cars with personality & some sense of _soul._ And in that, I totally agree. They're tremendously fun cars once you get them proper.

@3.v77 3 жыл бұрын

I've had an 89 and currently have a 87 GTA.. and oh boy am I constantly fixing parts on it.. 😐

@miguelgalindo7941 3 жыл бұрын

I appreciate your pain my friend. I'm currently resorting a 1997 trans am. Fix 1 thing and five more keep popping up. But, i love my car. Your channel is great so keep going.

@quicksilver462 3 жыл бұрын

#1 rule I have learned from working on cars for almost 40 years..... IF IT AIN'T BROKEN, DONT FIX IT!!!

@deusexaethera 3 жыл бұрын

As old as this car is, anything that isn't broken is pretty much guaranteed to be operating outside its original design specifications.

@dianelee2100 3 жыл бұрын

I sold those brand new. Youngest salesman to work at 100 year old dealership. Every demo was a new FIERO GT. EVEN THE LAST YEAR. GREAT CARS

@disgustedvet9528 3 жыл бұрын

I owned an 80 Buick Regal and an 86 Buick Grand National both 80s GM products and had no problems with either . Now the Pontiacs I had previously owned, 64-69-73 all gave me water pump and heater core issues. Now my sons have had Mitsubishis and Audis which were expensive disasters . I think you can get a lemon from any brand , some just cost more .

@7x779 3 жыл бұрын

Ps: Indeed, your lucky that it failed at home. Imagine if it quit on you in the middle of a blm riot, Or somewhere in South Africa. By the way, used to be a guy with the website that shows a lot of cheap effective upgrades for those Tbi engines. If I recall, a throttle body spacer was one of them. That motor should also handle a 150 horse nitrous kit without harming the engine, and that will give you the throttle body space as part of it. I think I even have one I've been saving for when I get an old hoopty. BTW, The 350 Tbi Has a lot more torque and power if you ever drive to back-to-back. Good luck and keep up the good videos, specially the ones where you stand up against the CP and educate people. We have a whole generation of people now that are so blindingly ignorant of communism it's unbelievable, and I think it's been by design.

@althunder4269 3 жыл бұрын

That guy in the Trans Am commercial at the end was going to get laid and he knew it.

@rudevalve 3 жыл бұрын

Certified Gold!!!!!😎

@bcarss1970 2 жыл бұрын

0:22 top was my Dad's new in 86 minus the t-tops. 305, 5 spd, WS6. Not the fastest but was fun to drive I had an 84 Z like on the bottom except black, no t-tops, no orange stripe but mine was hooked up with engine mods, exhaust, gears, and beefy suspension. That car ran on rails. Out-corner any U.S. production car of the decade.

@maikeru01 3 жыл бұрын

Aluminum is the only word that is acceptible in the way that the rest of the world pronounces it differently from the US. In that case we are the ones who changed the spelling. Every other metal ends with ium, titanium, magnesium, even Einsteinium. You win this round, South Africa.

@williamswenson5315 3 жыл бұрын

The Gershwin brothers had something to say about this...

@michaelbernon8117 3 жыл бұрын

Had a 82 Camero.... Slow, V-6 piece of $hit... But WoW was that car a chick magnet!!!!

@wojtekdobrowolski8084 2 жыл бұрын

Wow! I'm so glad I've found this channel! A great youtuber turns out to be a car guy as well!!!!!

@hjjfffaa 2 жыл бұрын

Whenever I hear that phrase from someone, I like to bring up my 1970 Chevelle which has a service interval for re-torquing the body mount bolts every 50,000 miles. Imagine if a manufacturer tried that today.

@sparklesparklesparkle6318 3 жыл бұрын

Great video Winston I love the channel!

@7x779 3 жыл бұрын

I mention about the distributor in my previous post. About the coolant tank, Plastic and rubber parts from China are garbage like you experienced on your cheap Chinese car. However there's a product called goop you may want to try next time, It's amazingly adhesive durable and resilient for repairing things like that tank and it may have worked. That tank does not hold any pressure so it only has to be mechanically strong watertight and temperature resistant up to the temperature of the coolant.

@nate_d376 3 жыл бұрын

"Beset by bandits..." LMAO, until I remembered.....he lives in LA......

@jtwu8931 3 жыл бұрын

In Orange County I recall, a lot of anti anti-Asian hate mobs....

@versatec1 3 жыл бұрын

Thats a lovely tank upgrade...so nice and shiney😊👍

@jond1965 2 жыл бұрын

I still have the original plastic tubs from my original 89 bird. I put in a new distributor 3 years ago no issues. Put a Delco fuel pump in 5 years ago still going strong. My car is not junk at all. I love my formula 350.

@davebarron5939 3 жыл бұрын

Sorry for your trouble. I purchased my 83 Z28 in summer 2018 (after looking at 20+), super car and had NO rust! (Most important thing where I live.) it was not running and had a bent axle, but UN-molested, I got it dirt cheap. I knew that the engine didn't run because the Ignition Module was bad, and the axle I replaced for $35 from the junk yard. And I have driven it trouble free, and enjoyed it since, you cant beat these cars, totally build-able, massive aftermarket support, and just scream LS swap. Your white TA is nearly 500 lbs lighter than your black 77 TA. PS. GM control modules are known to fail, keep one available, you will know simply because there will be virtually NO electric power anywhere. Love your choice of cars. Cheers!

@sequentious 3 жыл бұрын

Looks like the same ICM that is used in the Pontiac Fiero. It's very common to keep a spare in the trunk just in case. Easy diagnosis of a faulty ICM is the tach doesn't move when cranking the engine.

@dhanybegood 3 жыл бұрын

You have a great content! I really enjoy every episode, I own T/A GTA 88 and know Your pain. Regards Daniel.

@serpentza 3 жыл бұрын

Thanks mate!

@Mrbfgray 3 жыл бұрын

Painful about new parts failing--I was schooled on that when old industrial engine wouldn't run right after I replaced the points, didn't think it could be that just like here, but friend mechanic went *straight to new pts* when I mentioned it,...turned out the cam follower pivot was grounded to the base! I'd NEVER seen that before in decades of frequent pts maint and replacements and the parts shop was skeptical but put a meter on it and....continuity.

@gimmefuel7268 3 жыл бұрын

I was excited to see another Fire Chicken vid in my feed this morning!! Love your vids man. Keep’ em coming. 😁👍🏻👍🏻

@LysergicKids 3 жыл бұрын

"They don't make them like they used to!" What? Half assed, cheaply sourced, and unreliable? Haha. I guess there is a point to older vehicles being easier to work on due to the reduced complexity of on-board computers and circuitry. It does feel nice to pop your hood and actually see the engine apposed to hunks of plastic. But I agree, I'm glad they don't make them like they used to. I'm also glad that we can still buy older vehicles to tinker with and modify. It's also worth noting that old Japanese cars are really the only vehicles that don't have these issues. I recently started a new project on a 86 Porsche 959 and my god, it's a nightmare. It was the first time Porsche introduced liquid cooling... What American cars from this era lacked in regards to quality materials. The germans made for with overly, obnoxiously, complexity, and cramming shit into the tightest places with their little German hands.. Needles to say, the end result is the same. Cars from the 60s-90s are unreliable. Unless it's Japanese.

@jbbuzzable 3 жыл бұрын

I agree with every point you have made here.

@713Ace529 2 жыл бұрын

Right. They don’t make them like they used to. In fact those were built ahead so their time I think. I’m so glad I still have my 91 Trans am t-tops.

@P.J.MartyCone 3 жыл бұрын

Nice Licorice Whip !

@masskhamisi4 3 жыл бұрын

I love my third gen..specially the manual transmission

@Igeeckow 3 жыл бұрын

Love your videos

@NewEdgeDesigns 3 жыл бұрын

Absolutely..I have an 03 mustang GT and I love suspension mods....

@SupaFlyJedi 3 жыл бұрын

While I feel your pain in the cheap quality of GM cars, the upswing is there is a large online community dedicated to keeping these cars on the road, and no matter the issue, somebody somewhere has had it and has a fix for it. Ran into that plenty with my '97 Z28.

@Anonymous-ks8el 3 жыл бұрын

They really don't make them Playboys like they used to!

@serpentza 3 жыл бұрын

haha more coming soon!

@askannav2094 3 жыл бұрын

GM must have been the same is every market. GMH Holden was excactly the same in Australia. The Australian GM's were assembled in the 80/90's with some sort of hard brittle plastics that seem to discolour & shrink in the Australian sun. Chasing parts to restore an 80's or 90's Commodore is such a challenge now , that interior parts in usable condition have gone through the roof .. price wise

@michaelgrow8630 3 жыл бұрын

Thanks. Miss my red Camaro with t top and golden cloth interior.

@ChucksGhost01 2 жыл бұрын

I've replaced the ignition control module on my 1991 S-10 five times in 8 years.

@kevinbarry71 3 жыл бұрын

As an American; who has much experience with cars over the decades, there is a reason I drive Toyotas

@Avi8tor857 3 жыл бұрын

It's always the ICM, especially if you just replaced it and it died lol. Two things if the heat transfer paste isn't used it will die very quickly. Also often for what ever reason the distributor often has a weak ground that will kill the ICM. Add a ground wire. Beyond that buy two and keep one in the "glove box" in the truck. Because it will die again.

@jameshypnoticdancer Жыл бұрын

Same with Chevy when they went away from points

@VirtualR 2 жыл бұрын

Was going to recommend you get an aluminum replacement for the water bottle, good choice :) I've got an early 90's Holden V8 in Australia and almost every new direct replacement part I've purchased has been junk, issues with the distributor were identical to yours. It's definitely better to buy locally reconditioned, at least the mechanics / auto elecs doing the rebuilding process have had experience in choosing every little replacement part that goes into the main product being rebuilt.

@michaelzuccaro1798 3 жыл бұрын

Thanks for the video.i still have my 79 t top formula from brand new.she still runs but needs to be gone through completely since it was my daily driver for 30 years.235000 miles on it.a awesome car to buy new when I was 18 making under four dollars an hour.that was my chick magnet back then.enjoy yours.

@WorthlessWhips 3 жыл бұрын

Awesome! Would love to see pics or a video of your formula

@coolissimo69 3 жыл бұрын

The expansion tank is goegeous.

@danielbjohnson 3 жыл бұрын

The new homes in Irvine are basically the same, built very quickly with cheap parts, but they have demand and supply so they make extra bucks. The "too soon but necessary" home upgrades will need to be better quality.

@Chris-qv5mc 3 жыл бұрын

Oh man I had the same problem with the ignition control module in my 87 Formula. What a headache it was to figure out that was the issue. Thankfully I encountered an old mechanic who knew these cars were notorious for that issue and diagnosed it. I once had a 1980 Z28 that was similar to your 79 T/A. Is it me or were the second gen F bodies just built better? As always great video and content! 🦅

@AshkenaziChristian 3 жыл бұрын

"Planned obsolescence" started earlier than we were led to believe....

@everythingautomotiveeta5839 2 жыл бұрын

Awesome and fair

@gene8842 3 жыл бұрын

I agree with every word of this video. Especially the conclusion. Love the channel and everything u an c-milk create.

@chuckwhitson654 2 жыл бұрын

There's some decent cam grinds for the 5.0, getcha some aftermarket injectors and exhaust a better tune. And a 3:73 rear gear and you can get alot of red light to relight street racing fun

@blurglide 3 жыл бұрын

Covid has lead to a global parts shortage, which has led to some junk counterfeit parts. I broke an axle shaft on my Jeep TJ and it took me 3 months to get a new one. A mechanic friend of mine says about half the clutch and brake cylinders he's bought in the last six months have quickly failed. He says, for the time being, pay extra for OEM. Unfortunately, Chrysler no longer makes the clutch hydraulics for my Jeep so I have to roll the dice.

@maximilianswansson1264 3 жыл бұрын

Was the new distributor made in China? :)

@williamswenson5315 3 жыл бұрын

My thought as well. Wouldn't that be ironic?

@williamswenson5315 3 жыл бұрын

@William Schwartz A good point. I don't know if the IM uses a heat sink, but if it does and it wasn't applied, that would be a resounding, "Yes!" If Winston didn't apply it and it is called for, he could get it at Radio Shack or a computer supply store. W

@blakenewton2781 3 жыл бұрын

Possibly. And that might be a problem ( or it might not). It depends on how it was made. There are several different grades of components made in China ( or Taiwan, or Singapore or Vietnam). The bottom of the list is simply a copy of a copy. The quality control is almost non existent and the companies themselves have the life expectancy of a fruit fly at Martha Stewarts house. A rung up the ladder is the copy of a quality product. Again there is somewhat inferior quality control but a possible willingness to improve to the next step, which is the carbon copy. These are direct copies and have reasonable quality. Finally the last one is products designed by blueprint with very good quality control. Finding a quality product however can be difficult to ferret out, so far I have been lucky. Winston should have had another distributor to replace his. I have a box filled with new starter, alternator, belts and all the electrical components to completely replace the majority of underhood electronic ignition parts and keep me mobile. Being stuck on the side of the road on a busy LA freeway would be a world of suck.

@williamswenson5315 3 жыл бұрын

@@blakenewton2781 Amusing comment about the fruit fly. Yeah, I suspect the paper trail would be difficult to follow if you were bird dogging the quality issue and I too, carry essential parts, tools and a full-sized spare tire in my GTI. As bad as LA freeways and some neighborhoods might be, the middle of nowhere is not an improvement.

@puggsincyberspace 3 жыл бұрын

I got the same overflow tank as you but in black. But it's, not just that old tank that is an issue, my 2013 Holden (Chevy) Cruze has had 3 of those tanks replaced. so much so that I brought an extra one and since then, I have not had an issue...

@versatec1 3 жыл бұрын

The fun is making them better (perfect even)

@barniyamum 2 жыл бұрын

its like with old swords handed down from generation to generation... one replaces the blade, another the handle, then sb the crossguard and pommel... keeps the thing alive..

@mikemcgown6362 3 жыл бұрын

Boy, you're not telling me any news about 3rd gen F bodies! I worked at the Chevy dealership from '88 to '92. Then I went to the Buick dealership until '95. Got to work on the brand new junk! Even worse than the F bodies was the Beretta and Corsica. Factory recalls for failing door hinges. The hinge first world seize then snap. Extra weight on the other hinge would snap that one, too! That dropped the door to the ground! Same hinges were on the Lumina's, too. Those were the days! Won't even get into the Astro vans or the Lumina APV (the all plastic vehicle). How about the new Nova? You know the re-badged Toyota? GEO? Joke and a half! Even after all that, I'm still a classic GM guy.

@savedfaves 2 жыл бұрын

Same as my bin or my sink basin. The plastic is impossibly thin. It’s a pain in the arse. Both cracked incredibly easilly

@joakimsoderberg8046 3 жыл бұрын

I have a T/A Gta 88 and I totally understand what you. Questionable quality but I love it. Like almost every car from the 80s. What annoys me is the bad quality of aftermarket parts!

@matrix1879 2 жыл бұрын

I put a similar overflow tank in mine but didn't drill any holes for venting. Do you think it is ok like this or should I have some kind of venting? thanks!

@williamswenson5315 3 жыл бұрын

I've said it time and again, "Metal. Give me metal!"

@josephgrondin9081 3 жыл бұрын

One of the reasons I ls swapped mine all new parts would always fail, especially the icm they constantly go always keep a spare with you. I like the aluminum overflow tank, I replaced mine with a fourth gen that replaces the battery tray

@josemontano7767 Жыл бұрын

Where did you get the Aluminum expansion bottle?

@TheBlast4 2 жыл бұрын

Hello.. hey were did you buy the shifter?

@jackbailey7037 2 жыл бұрын

We Americans know those era cars we shit-built; that's why everyone started driving Toyotas. But they had style! And they went fast in a straight line - when they were running.

@XxMusclecarsxX 7 ай бұрын

love my 87 iroc z t top, 5.7 and t5 swapped

@KyleRTenor 2 жыл бұрын

Where did you get the aluminum reservoir from?

@bbgcars 3 жыл бұрын

THE ONE THING THAT CATCHES MYEYE RIGHT AWAY IS THE VICE GRIP ON THE DRIVERS SIDE! LMAO...I know the feeling man.....should get those gas struts asap as they are cheap and easy to get,, but for me and my F150 its harder because im in ASIA PS:LET ME DEAL WITH THE BANDITS IN THE MOUNTAINS....youre in the city so you will be just fine!

@deusexaethera 3 жыл бұрын

You talk about how big and ugly the coolant expansion tank is, but I look at that circular air filter and corrugated intake hose and I want to barf. New engines look so much better without those awful things sitting on top and obscuring the valve covers.

@CPMest81 2 жыл бұрын

You need to vent that new coolant reservoir mate, like the cap was on your original one.

@wingedhorsegarage473 3 жыл бұрын

Welcome to the world of 80’s GM . Every Fiero owner knows to carry an extra ICM in their car for this very reason! 😆

@devianb 3 жыл бұрын

I keep a spare one in my Trans Am along with some computer thermal paste. I would only get like 2 years out of them. AC Delco ones lasted longer than other ones. They always failed in the summer too.

@williamswenson5315 3 жыл бұрын

Did it ever catch fire?

@wingedhorsegarage473 3 жыл бұрын

@@williamswenson5315 Lol, no. That’s kind of an urban legend . The 84’s were the only Fieros with fire problems and they were all recalled. I’ve owned an 86, 87, and 88 and not one ever caught fire.

@williamswenson5315 3 жыл бұрын

@@wingedhorsegarage473 Thank you for both the reply and the recall information. Based on the handle, I'd guess in my usual perceptive way, that you are an expert on these cars. My comment was based, not on facts, but on anecdotes. I did see one, gloriously aflame by the roadside years ago and the other one, belonged to a close friend. That one, sensibly decided to combine vigorously with oxygen in front of a firehouse. He is a bit bemused to this day, when he describes the casual way one of the firemen strolled over and doused it with an extinguisher. That one was repaired and he kept it for years despite the non-stop ribbing he took from the rest of us about the "Moro Castle" and "General Slocum". He loved that car.

@CreeperKen 3 жыл бұрын

nice video hey winston hey milkyC

@Pissrust69 3 жыл бұрын

Woah where did you find that pic of the black and gold camaro? I have one identical to that

@DanGoodShotHD 3 жыл бұрын

Yup

@dennisstafford1749 3 жыл бұрын

Can't wait to see the thing after some more tinkering. There have to be some alternative parts that work that are of higher quality or can be bypassed by modernizing systems.

@gmorphan 3 жыл бұрын

Most of the reproduction parts today come from China or another area country. Low volume + Low cost = Junk I bought '83 Z-28 new...the F-bodies were rattle traps. I could fill the ashtray in a month with screws that fell out from under the dash.

@hickeyskustomresto 3 жыл бұрын

Could be plastics are aging out. Sometimes aftermarket parys are crap too. I had an 86 2.8 multiport camaro in the early 90's and ran it well past 300000kms. Never easy on it. I think I change the throttle body once and otherwise just maintenance . Pulled the plugs out at 300thou and they were burnt clean off. Still ran. Lol

@The_Future_isnt_so_Bright 3 жыл бұрын

Heard the voice, knew it was Winston instantly. Love taking older things and adapting modern car parts onto them. Charging systems, high pressure fuel pumps, and creature comforts of all sorts. I also like to downgrade modern stuff just for fun. My 09 gen 3 hemi has a GM distributor on it (which took alot of engineering ) . Only uses 8 out of 16 spark plugs but it works.

@vectorm4 3 жыл бұрын

Agreed, they don't make them like they used to; and thank goodness.

@deusexaethera 3 жыл бұрын

I dunno what you're talking about bro, I always wanted to burn to death after having the gas tank pop out of my trunk and go flying through the passenger compartment during a moderate rear-end collision. Now I'll never have that chance.