Thanks for the time you put into this review! You are a good teacher.
@MechanicMindset Жыл бұрын
Thanks Craig!
@Markb8608 Жыл бұрын
Thanks from New Jersey. I am a member of your course scope training. Thank you very much for this scope review. I bought it during summer but havent seen too many videos on it. I love your videos.
@MechanicMindset Жыл бұрын
Hey Mark! That’s great to hear, how do you get on using the ThinkTool scope box? Hope you’re enjoying the lessons in MechanicMindset.com thanks!
@DJ-tn7vj Жыл бұрын
Yo D. Excellent video. I have this scope for over a year and still haven't master it. Its so easy to grab the big boys tools which you can zoom in and diagnose. Basically this is really a cool tool if you are now starting to scope and don't want to invest heavily into a scope.
@MechanicMindset Жыл бұрын
For sure, this will do the job for most things and if you have the ThinkTool scanner, nice and convenient 👍
@DJ-tn7vj Жыл бұрын
@@MechanicMindset thanks again D. As always on top of your game. Keep pushing
@MechanicMindset Жыл бұрын
Correction: we are told the scope is supported by MicSig - great scopes!
@victorhoyt43529 ай бұрын
It's crazy that even the cheap picoscopes like the 2204a and 2205a still put this $600 oscilloscope to sleep. I get way better results out of my 2205a. I know it's not 4 channels and needs an attenuator sometimes, but I rarely need 4 channels anyway. Not to mention, you can't even do a split screen with this oscilloscope either. This thing should be at least half the price they are currently charging for it. I feel like even the autel oscilloscope is better than this oscilloscope. It's nice that it connects directly to your scan tool, but you just cannot beat picos software.
@josephdavis42016 ай бұрын
I have an 8 channel hantek that is on par with this scope. The hantek is only $99usd on Amazon. Pico makes it look like a child's toy.
@omgitsZAN4 Жыл бұрын
Love the Snapon waveform generator board in the background. Awesome for generating signals without a vehicle at hand
@MechanicMindset Жыл бұрын
It’s a great little tool, used it for this video 👍
@omgitsZAN4 Жыл бұрын
@@MechanicMindset I can tell 😉
@ScannerDanner5 ай бұрын
Nice review! Thank you
@MechanicMindset5 ай бұрын
Thanks! Hope it helped you get going with your TopDon scope 👍
@nickayivor8432 Жыл бұрын
Good Evening Mechanic Mindset My teacher PRODIGY Mechanic Mindset Thanks for sharing it Take care and have a great Evening with all your family around you PRODIGY Mechanic Mindset From Nick Ayivor from London England UK 🇬🇧
@MechanicMindset Жыл бұрын
Thanks Nick!
@heny3231 Жыл бұрын
Hi Nick, just wanted to say I agree with your comment and that it is clear we subscribe to the same channels as keep seeing your name, regards from up North! And further thanks to mechanic mindset for great content, just wondered if this scope can be used with other scanners and/or laptop? Thanks
@DependableAutoTruck Жыл бұрын
forgot to ask with the think tool or the hantek read pico wave forms
@MechanicMindset Жыл бұрын
Not compatible
@vincentmeadows1905Ай бұрын
Have you ever done the in cylinder pressure diagnosis with the scope and does it have overlays built in?
@MechanicMindsetАй бұрын
@@vincentmeadows1905 I’m not sure about the overlays. I can’t remember seeing that feature. I haven’t done in cylinder but pretty sure it will cope 👍
@ThunderbirdRocket Жыл бұрын
That’s super helpful information ! Thanks !!
@MechanicMindset Жыл бұрын
Glad you’re enjoying the videos!
@mirov1314 Жыл бұрын
Very good review, thank you
@katzenpapa8 ай бұрын
Everytime I try to use single seq the run/stop button turns yellow and says 'wait', I am trying to do the very simple relative compress test and i can't see it get started with this scope. I have the topdon version, but it is EXACTLY the same hardware and software.
@jessemackenzie6516 Жыл бұрын
looks like the Micsig . Also this is the same as the Topdon? Love your channel
@MechanicMindset Жыл бұрын
So it does! I’m told Owon supported this. Not Hantek. I think yes, similar to TooDon. Thanks!
@katzenpapa8 ай бұрын
How do you recall and review part of a waveform that has moved off the screen?
@weldingjunkie Жыл бұрын
50 PMTS is the recording length forgot to tell you
@KwameAkowuah3 ай бұрын
can i use the thinktool scope with my laptop please?
@Jpilgrim30 Жыл бұрын
If 50 volts max I’d use an attenuator on an injector signal as I see them reach 60-70 volts on the inductive kick regularly.
@MechanicMindset Жыл бұрын
Can’t hurt and will only save time. Probably leave one channel set with an attenuator all the time on the cart
@nelsoncasigna78186 ай бұрын
diculpe el link para aplicar a laptop por medio de windows y diagnosticar
@bekomcar5547 ай бұрын
Software wise, is it just like micsig's VATO 4 channel?
@MechanicMindset7 ай бұрын
It’s a MicSig based scope yes 👍
@keltecshooter Жыл бұрын
For the price point I'd prefer the micsig automotive tablet
@weldingjunkie Жыл бұрын
Awesome video - so Believe it or not the software is not Hantek it is Owon software. That’s not to say that they don’t get them from the same place. I believe it’s 200v input as well trying to find my info on that. I know for sure the software is Owon I’ll get back to you on the voltage. The only thing I found Cumbersome saving and recalling captures. I wish they made a PC version like Autel.
@MechanicMindset Жыл бұрын
Ah cool! I know Owon: I got one of their hand held. 50V was the max I could get on the scale; is it 200V max input protection? (Like 2204A, 20v max read, 100V over voltage protection). Cheers Jay
@MechanicMindset Жыл бұрын
PS. Same as MicSig?
@MechanicMindset Жыл бұрын
Update: had it confirmed that it’s a MicSig scope 👍
@weldingjunkie Жыл бұрын
@@MechanicMindset Where did you find that information? On the updates I’ll send it to you. It says OWON, you know when you update the tool? That’s interesting I wonder if it’s the same vendor
@MechanicMindset Жыл бұрын
@@weldingjunkie Ah ok, a asked my contact at ThinkCar, she works there. Have MicSig got anything to do with Owon??
@KwameAkowuah3 ай бұрын
hi there can i use the think tool scope on my lap top?
@MechanicMindset3 ай бұрын
I don’t think so
@MicsigOscilloscope Жыл бұрын
Nice video
@MechanicMindset Жыл бұрын
Hi MicSig, I’ve been talking about you! We understand this is one of yours?
@GroundedDiagnostics Жыл бұрын
Very intuitive scope. 👍
@MechanicMindset Жыл бұрын
It’s a nice layout; I like how the Voltage and Time setting buttons show and image to represent what happens when you press it (ie waveform gets bigger/smaller). What scope are you using?👍
@GroundedDiagnostics Жыл бұрын
@@MechanicMindset vantage pro. I really would like a pico one day.
@MechanicMindset Жыл бұрын
@@GroundedDiagnostics Very convenient having it integrated with your scan tool 👍 You won’t regret the Pico purchase!
@rcchar7 ай бұрын
So it you are buying your fist 4 channel Scope The Thinktool or a Automotive Pico? (I have the Kingbolen K10). Can you do a comparison between the two?
@MechanicMindset7 ай бұрын
It depends on your budget really. Pico is better than this, but is more expensive. I’ve not seen Kingbolen scope; is it rebranded? edit: I see, it’s a launch based scan tool
@DependableAutoTruck Жыл бұрын
do you think the specs on this are better than the hantek 6074 automotive scope
@MechanicMindset Жыл бұрын
Not sure, haven’t tried that scope
@madnadn Жыл бұрын
Hi Darren, do you know if Hantek dso306 or hantek 6074be is similar to this one? How does this compare to the ditex carscope plus?
@craigdanielski Жыл бұрын
I have the same questions.
@frankjones3073 Жыл бұрын
I just don't get the usless short leads. Snap-on included
@MechanicMindset Жыл бұрын
Way too short!!
@leecoon1004 Жыл бұрын
Hello~ I currently have a Thinkcar pros diagnostic device. Thinkcar Oscilloscope & Picoscope 2204a, 2205a I am wondering which model to buy. Oscilloscope is my first time learning, so please recommend which product to buy. Thilnkcar oscilloscope seems a little difficult for beginners to learn because there are few instructional videos and users. Please give me your opinion. This is Korea.
@prospexican11 ай бұрын
great! are you using a lop top or a thinktool tablet to run the software?
@BOPotstill Жыл бұрын
I'm curious, is that a version of H-Scope for android that they're using on the ThinkTool? I have a Hantek and Pico, and have only used them with their own PC based versions of the software. Never used the H-Scope...
@MechanicMindset Жыл бұрын
Hi, apparently Owon software not Hantek. HScope is separate for Android. I have HScope, just trying to figure it out for you before a video 👍
@urfanbabirov37955 ай бұрын
Hello mate. can U tell plz? what is maximum Voltage u can measure with this tool? 400V-450V???
@MechanicMindset5 ай бұрын
Sorry can’t remember; will have to remember to check next time I’m near one
@urfanbabirov37955 ай бұрын
@@MechanicMindset No problem at all Darren, cheers.
@stuartlade66118 ай бұрын
is this the same scope as the topdon oscilloscope and launch? they look identical and want to buy one. Thanks for the great content!!
@MechanicMindset8 ай бұрын
Yes it is
@stuartlade66118 ай бұрын
Thank you mate! 👌💪
@jezchamberlain459 Жыл бұрын
Do you know if you can use the scan tool and scope at the same time? For example run an actuator test and see it working on the scope.
@MechanicMindset Жыл бұрын
I don’t think so but I’ll find out. Like a split screen feature?
@jezchamberlain459 Жыл бұрын
@@MechanicMindset Yeah, split screen. I know you can with some of the Autel range.
@MechanicMindset Жыл бұрын
Not possible
@jezchamberlain459 Жыл бұрын
@@MechanicMindset Thats pants then. I've found it usefull in the past to drive an egr valve or ignition coil for example,with a scan tool and confirm its working on a scope.
@learningxcel6 Жыл бұрын
HI Thanks for your tutos I have some questions, I 'm looking for an diagnostic tools do you recommend the euro master thinktool ? what do you think about autel or launch X431 Pro ? In fact my budget is about 1700euros Thanks for your return
@MechanicMindset Жыл бұрын
Hi, Euro Master is a great tool, have you seen the review video I made for it? I think it may be similar to Launch. But I haven’t used the launch tool.
@alinduta5398 Жыл бұрын
is it possible to use two atenuators in series for high voltage?
@MechanicMindset Жыл бұрын
No this isn’t recommended. A differential probe is required 👍
@leftyspinn Жыл бұрын
Do you know if the topdon scope is 8 ir 12bit vertical resolution?
@MechanicMindset Жыл бұрын
It’s the same as this as far as I’m aware 👍
@MdRubel-gy8ms Жыл бұрын
Hello sir I'm mdrubel mechnice from bangladsh I work proton gelly car workshop
@edforthewin8574 Жыл бұрын
Does it work with the PD8 Thinktool?
@MechanicMindset Жыл бұрын
I think so. It has the option in the Mini. You can check if it’s there in the module menu on home page
@edforthewin8574 Жыл бұрын
@@MechanicMindsetwhere can I purchase one? I can’t find it.
@angusalamezie6193 Жыл бұрын
Can this scope run on a PC?
@MechanicMindset Жыл бұрын
I don’t think so
@barniep Жыл бұрын
Hi I have the similar in Topdon, but I can't get it to work, I don't understand, when you it on you have signals right on, I don't have any signals, do you know why no signals on the screen?
@MechanicMindset Жыл бұрын
Not sure. Do you have to activate the channel?
@barniep Жыл бұрын
@@MechanicMindset I have seen your scope video, and Done al the things you are doing, nothing help, I'm desperate 😢😢
@barniep Жыл бұрын
I did a factory reset, of the scope, and it works😅
@MechanicMindset Жыл бұрын
@@barniep Excellent 👍
@barniep Жыл бұрын
Have you made any good learning videos on this scope? 🤔
@careyautorepairs Жыл бұрын
❤❤❤
@danman9017 Жыл бұрын
it the same software micsig
@MechanicMindset Жыл бұрын
Ah yes, looks very similar, I am told Owon have something to do with this. Cheers