THINSET REMOVAL BIT product line. Options to accommodate electric powered and pneumatic tools. SDS Plus, SDS Max and 0.401 in shank
Пікірлер: 19
@allisongum85712 жыл бұрын
why not use the same bit as the thicker chisel used to remove the tile?
@thinsetremovalbit82416 жыл бұрын
3" X 7.5"- 0.401 shank: www.amazon.com/dp/B014030BME
@lellod8254 жыл бұрын
If only it was that easy... I've got thinset on concrete walls and flooring, and even with sds+ it takes about 30 minutes to remove a square meter.
@thinsetremovalbit82414 жыл бұрын
What kind of SDS + hammer do you have? Don't push down on the hammer try a steep angle and go in the direction of the trowel lines
@thinsetremovalbit82416 жыл бұрын
6" X 25"-SDS Max: www.amazon.com/dp/B01MTLEEU6
@marktaylor36303 жыл бұрын
Would you recommend SDS plus or SDS Max for tile and then set removal I'm using the hammer and chisel method and get paid by the job now so the faster I can do it the better
@rodytebcherani3 жыл бұрын
SDS Max will have wider scrapers available but also quite a bit more expensive...usually $400+ for a decent SDS Max rotary/demo hammer. While you can get an SDS Plus rotary hammer for around $100. SDS max hammer also will be quite a bit heavier.. So comes down to personal choice and budget
@marktaylor36303 жыл бұрын
Price and weight doesn't really matter what matters is getting your job done the fastest
@rodytebcherani3 жыл бұрын
@@marktaylor3630 SDS Max and I'd recommend this bit: www.amazon.com/dp/B07T91BC3G?ref=myi_title_dp
@rodytebcherani3 жыл бұрын
@@marktaylor3630 and everything we sell has 100% satisfaction guarantee any issues or questions you can email us at info@thinsetremoval.com
@thinsetremovalbit82416 жыл бұрын
3" X 10" SDS Plus: www.amazon.com/dp/B01402LETY
@VICMANROQ3 жыл бұрын
Would you recommend the 6" floor scraper or 6" chisel bit for thinset removal?
@thinsetremovalbit82413 жыл бұрын
Personally I prefer the solid piece chisel. Downside is it is shorter so if you have back problems the scraper is longer and allows you to be more upright. But the scraper assembly has more parts and is less reliable than the solid bit. However we warranty everything so you're covered either way
@VICMANROQ3 жыл бұрын
@@thinsetremovalbit8241 I was leaning towards the solid chisel bit and I still have a decent back. Thanks for the response and advice.