This 3D PRINTED UKULELE only costs $10 to MAKE! (but how does it sound?)

Рет қаралды 23,615

2 жыл бұрын

This thing is pretty neat! I'll walk you through where to get the parts and how to build it.
Grab parts for your own build here:
[Affiliate links - thanks for your support!]
AMAZON (fast)
Uke Strings amzn.to/3tMHmRM
Tuning Pegs amzn.to/3AfNzqE
Piezo Pickup amzn.to/3tIfLB5
ALIEXPRESS (cheap)
Uke Strings s.click.aliexpress.com/e/_AmAAKc
Tuning Pegs s.click.aliexpress.com/e/_AfdQXI
Piezo Pickup s.click.aliexpress.com/e/_ABZ0qy
Filaments:
Priline Wood PLA amzn.to/33VD6Et
Paramount 3D Mid Century Teal PETG amzn.to/3Komo1z
Overture (not Hatchbox, my bad) Rock PLA amzn.to/3GNgFzT
SUNLU Rainbow Silk PLA+ amzn.to/359z9Nk
3D Print Files: www.thingiverse.com/thing:278...
I love the idea of 3D printing instruments, so when I saw this "Travelele" model by Thingiverse user "Avocado_Boat", I had to give it a shot. I think it turned out pretty great!
#3dprinting #ukulele

Пікірлер: 46

@raphaelboll6096 9 ай бұрын

The truss rod can help with the bend in thw neck. Truss rods were invented to counteract bowing of necks under the tension of the strings. So on traditional truss rods you can just ighten it some more and it eliminates the bend. However idk if this one works as well

@kmoecub Жыл бұрын

You need to go to a real hardware store. Metric has been a thing for a long time in the U.S.. There hasn't been a U.S. built vehicle that didn't have at least 50% metric fasteners since 1973. Also...the neck is bowed because you didn't bother to adjust the truss rod to correct the bow.

@TheCrystalJules Жыл бұрын

my dad has built a wood ukulele before with the help of my brother, it looks and sounds beautiful, but it's really nice and he travels a lot and we wouldn't want to risk damaging it, so I might find a buddy with a 3D printer and buy a spool of wood PLA to try this build out! It might not be perfect, but if it broke in a suitcase it would be no big deal 😂

@bymmijprime281 Жыл бұрын

Thanks for the vid, I'm hoping to try one of these for my daughter.

@PattheMovies Жыл бұрын

Best of luck!

@brianfromireland 2 жыл бұрын

Thanks for the vid, really interesting

@joshua2400 Жыл бұрын

Jesus the good lord loves you my friend! I hope youre having a great day

@Apollostowel 25 күн бұрын

I’ll stick to my Risa uke solid, properly all solid wood with a hollow bit for the pickup, planetary geared tuners, zero fret for intonation, real frets.

@jkbish1 Жыл бұрын

Right. Making Uks is the way to go. Some folks have tried to make violins. I think uks is a far better use of the technology, especially if you can produce a fairly good quality sound. I could imagine cranking out 10 for a high school group. You are on to something.

@LincolnWorld 2 жыл бұрын

Fun video. I've been thinking about printing an ukulele. You might want to try it with a different set of strings. Might sound better and stay in tune. I've noticed some ukuleles sound better with Worth, some better with Aquilla, etc.

@PattheMovies 2 жыл бұрын

Yeah, I think you're right. Next time!

@rachelmanke7570 Жыл бұрын

Great job pronouncing Iz's name! :) Your issue was probably just that strings take a hot minute to stretch out when they're new.

@spastickitchen 6 ай бұрын

I made a couple of these as well. At first, I was happy with them, but, the moment the novelty wore off, I decided it was a waste of filament. Here is why... 1. The friction tuners are not intended for plastic. I am a very gentle player, but I could not get the silly thing to stay in tune for more than a few seconds. I tried adding felt washers, which extended play time to maybe 45 seconds, but still too unstable for practical use. 2. I printed my neck as intended, but still had the same problem you did with your first neck. Also, trying to fix it with the truss rod broke the truss rod. So, I tried reprinting the truss rod with 100% infill and the neck with also much more infill. I redesigned the body to fit geared tuners. I even printed geared tuners out of ABS to try to experiment. (They broke under tension) Mark II worked better and I had a blast with it for a couple weeks until I noticed the neck continuously bowing. Eventually it was unplayable, and again, the truss rod broke trying to adjust this. Finally, I made one out of scrap softwood (from a bed slat my kid outgrew) using hand tools, and so far, that one has held up longer than either of the printed ones. Funny thing is that, considering the cost of filament and all of the futile redesigning in CAD, the wood one was both cheaper and quicker.

@rexjaguarius 4 ай бұрын

Thanks for this, I was thinking of making one but rather thought the same. Did you make the neck for the wood one? That's the thing that seems a bit daunting.

@spastickitchen 4 ай бұрын

@@rexjaguarius yes. It only took a couple hours. It's softwood, so it is easy to work. I tried, years ago, to make a guitar neck out of pine, expecting it to bow, and that's exactly what it did, but the shorter length of the ukulele neck, and a little bit more thickness, and it has been fine so far.

@ActuarialAnalytics 2 жыл бұрын

Hello! I am trying this project - what did you use to get the strings to go through? Even with new strings, I'm having some trouble with that step :/

@PattheMovies 2 жыл бұрын

I used about a 6inch strip of masking tape folded in half with the end of each string inside and fed it through the holes. Definitely the trickiest part!

@MIKEYBINDACITAY Жыл бұрын

Did you ever figure out the pickup problem?

@dittagecoeco2738 Жыл бұрын

better tuning can be obtained switching to geared tuning pegs

@fgmrbala 5 ай бұрын

I want. How can I buy It?

@Fofiddly Жыл бұрын

What kind of pocket knife was that?

@SharkBeret 2 жыл бұрын

can you please show me how to insert the strings? I wasn’t able to see it well in the video. edit: I found it was easier to feed fishing line through, then tie the fishing line to the string and pull it through after wrapping the fishing line around a screwdriver.

@PattheMovies 2 жыл бұрын

If they're new, they should slide through the gap on top and curve out through the middle. Mine were used and I had to do it in a weird way by feeding tape through the holes.

@SharkBeret 2 жыл бұрын

@@PattheMovies how exactly do you use the masking tape? I got brand new strings and I’m still having trouble getting it through

@SharkBeret 2 жыл бұрын

@@PattheMovies thanks for responding, btw

@PattheMovies 2 жыл бұрын

If you fold the tape lengthwise with the adhesive facing in, you can feed it through, then sandwich a string in the middle to pull it back out. It's not super elegant, but it works!

@SharkBeret 2 жыл бұрын

@@PattheMovies The masking tape trick almost worked, but maybe it was something with my print… I found a better method and I put it up in the edited comment for other people to see, thanks!

@stfan401 Жыл бұрын

Do you think the 3d design will work as a left handed uke?

@PattheMovies Жыл бұрын

I don't see why not!

@stfan401 Жыл бұрын

Thanks! I was just thinking the nut could be a problem. Now to find a 3d printer haha!

@stfan401 Жыл бұрын

Do you have a video where you install the strings?

@theartmasta Жыл бұрын

yes. I think all slicers have the option to mirror the model before printing. mirror that nut and good to go

@wooac 9 ай бұрын

Interesting project. Why not buy a fretboard with metal frets and glue it on? The sound is really dampened and muddy. It would be better with steel strings and humbucker pickup.

@PattheMovies 9 ай бұрын

Agreed, already in the works!

@spastickitchen 6 ай бұрын

Sadly no. Steel strings create too much tension. Not only enough to destroy the plastic, but even enough to render friction tuners inoperable. But, in any case, plastic cannot be used, so 3D printing is basically incompatible with steel strings.