Well we thought this was going to be a first start video, but it turns out this engine is stuck. So this video will be us getting it unstuck. Thanks for watching!
Пікірлер: 5
@thomasadrian98546 ай бұрын
I bought a stuck Deere “B”- pulled the plugs & drowned the cylinders with Kroil for a week. I made a socket to fit the flywheel & cranked on that with a large pipe wrench & she eventually broke free…E-Z does it & Kroil worked for me….
@ThreeGenerationsRestoration5 ай бұрын
I've heard kroil works great, we just didn't have any on hand.
@brokenwrench15 ай бұрын
his engine uses shimmed connecting rods .i would drop the oil pan and remove the pistons and replace the rings. if the rings are stuck you will have a dead cylinder. you check the oil clearance with plastiguage and if too much oil clearance remove a shim layer to take up the clearance.. until you have 0.0015" i would also grind the valves and seats. then you will have a full power WD with good oil pressure. i recomend hastings rings
@ron8275 ай бұрын
You may have wabted to first to see if it was hydrolocked which would have been an easy fix. If it was not, then soak the cylinders with some diesel or penetrating fluid for a week or too.
@ThreeGenerationsRestoration5 ай бұрын
I took the spark plugs out and looked in the cylinders and just saw rust so it wasn't even worth it. Your definitely right though, some come easy and some just don't.