This is a Gorgon Killah? Really?

Рет қаралды 11,112

Күн бұрын

This must be the BEST body possible for this truck!! JConcepts Stage Killah Body bit.ly/49K4To3 TPU Body Mounts exocagedrc.com/collections/ex...
Arrma Gorgon bit.ly/41Tl5k8 bit.ly/3ws3O63
These are my Affiliate links, they really do help the channel if you use them, Thank you
AMain bit.ly/2RsdBVl Amazon amzn.to/49fwQnL Horizon bit.ly/4b8l0xr Tower Hobbies bit.ly/3HyQijk
Exocaged RC exocagedrc.com/
Radiolink RC8x
Amazon amzn.to/3TzFE31
Flysky GT5
Amazon amzn.to/48qfPH4
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc

Пікірлер: 98

@boduke9428 2 ай бұрын

I gorilla taped my Gorgon body. I used at least 2 layers of tape running both length and cross ways on the body. It made it noticeable heavier but also much stiffer. It hasn't broken yet and i bought one of the second batches released. It is a great little truck. I have the 100 amp 3900kv spectrum combo. 2s is fast and 3s is perfectly insane.

@Hobz79 2 ай бұрын

That body looks way better than the stock one! Good idea! A common trick is to make the rear holes oval so that as the body compresses it will slip a little instead of buckling. Same reason leaf springs aren't fixed at both ends, the shackle helps allow for the spring to extend lengthways as the suspension compresses

@NCMOUNTAINSbackyardRC 2 ай бұрын

Hands down one of the toughest RC on the planet 🌎. I just love the Gorgon I let everyone that is interested in driving it Drive it ! All the neighborhood kids love it to ! I had reinforced the Body earlier on. It’s holding up ok .. it’s my favorite one too

@RcPlayer-tt2vw 2 ай бұрын

It’s reason the big dog in the industry worked so hard to put them under . They’d never allow something this capable without getting you back in hobby shop

@G.M.. 2 ай бұрын

In France we have a manufacturer of unbreakable bodies who can reproduce any model in different colors. It's called "elsass body RC". It has Gorgon bodies, and they are truly unbreakable! On the other hand, I don't know if he can deliver for export.

@harrykunz3428 2 ай бұрын

Thanks, I did not know this shop 👍 Neighbour country, Switzerland

@Addicted_2RC 2 ай бұрын

Drywall tape and e6000 will fix the split and on certain areas it will help it from splitting but without a cage support underneath it's going to have a lot of stress on direct body shots. Looks awesome Joe 👊👊👍👍

@CrazyDuck80 2 ай бұрын

That’s got to be one of the toughest RCs I’ve ever seen, and it’s crazy how much abuse those tires take 😂 A self righting 2wd lol awesome.

@alanlocklear4951 2 ай бұрын

Love my gorgon and I'll be buying these mounts today thanks for the video

@jamisonsenitz2528 2 ай бұрын

Man that looks rad af!!!!!!

@thibster5590 2 ай бұрын

That’s awesome, love the look, but I also like the look of the Gorgon body as well. Great trial and error testing. I’m thinking of picking up a pair of mounts.

@FarmerFpv 2 ай бұрын

There is a Gorgon cult out there. In the skate park I go to there is hardly anyone that goes to it because it's kinda far from the main road. I was the only one with an RC there for a long time. Not long after a bunch of kids started showing up with Gorgons. They said their parents bout it for them because it was cheap at the hobby shop. So now the Gorgons are like flies trying to hit me coming from all directions, lol.

@ExocagedRC 2 ай бұрын

absolutley!! Probably the toughest RC I have!!

@runnerbaba 2 ай бұрын

I will just use the Arrma Granite Bodymounts.

@insanebmxthomas 2 ай бұрын

Keep coming back to this video. You make this car look like sooo much fun! And the body makes it look soo much better. I just wish the gorgan was a 4x4. Although ive turned my current rc into RWD and that was a fun 2 minutes until i totaled it 😂

@allscalerc 2 ай бұрын

That mount is awesome. Great job! 👍

@old-rcplane-phart 2 ай бұрын

Intentionally trying to destroy a body/body mounts is like the 1 time I was asked to destroy a pos, trashed eflite valiant for a buddy. (That bird had issues from new, factory new. WE still believe that plane was fully demonically possesed!). Took me a few attempts (cause I do everything I can to save anyone's plane, anything/everything I can to NOT crash!), but finally full speed dive into the grass. Hit so hard the spinner was 18" in the ground. (It was cool!🤪)

@paulalvarezdelcastillo4117 2 ай бұрын

Good stuff! That body looks great on it, and the mounts seem really tough!

@shyancole2490 2 ай бұрын

Love that truck with that body on it and great job on your crashes LOL it is hard to just let it land wrong it's instinct to try to correct it after so long

@RC-Closer1313 2 ай бұрын

Wow! That looks awesome !!

@watchurheadrc721 2 ай бұрын

kinda looks like a MAXX D from monster jam

@RcPlayer-tt2vw 2 ай бұрын

It does

@mikellewis2346 2 ай бұрын

Thats exactly what i thought also. A cool paint job away for it.

@RcPlayer-tt2vw 2 ай бұрын

I bought this truck used it 3 times stock , I was going to modify it but for now It’s a shelf queen . It’s hard to keep a fleet maintained if you’re a driver more than a builder but rcs like this pay for themselves and to people not into Rc the features make no difference. How many times regular folk are intrigued ask two famous questions, how fast does it go , how much does it cost . Other than not being 4wd this thing really makes a good monster truck , these companies figured out to oversized the metal drivetrains , in a quality plastic Rc . Same with those Wov racing Rcs . Now the trade offs scale vs durability, more durable the less realistic to full scale but Gorgon checks a lot of boxes , Exo is on point saying this is best release of the year , if you just look at fun factor and versatility while being bulletproof,

@kevincain6843 2 ай бұрын

MaxD is what I first thought too. Atleast the basic shape.

@Potato_Donkey 2 ай бұрын

your enthusiasm is always contagious. thanks for a solid option for the gorgon body which will give up the ghost eventually for all of us. love your dedication to this wonderful lifestyle of ours!

@ExocagedRC 2 ай бұрын

Thanks buddy!

@woutervanwijk4369 2 ай бұрын

Seriously, it really drives better offroad than some 4x4 trucks out there! It's just isn't available anywhere over here in the Netherlands and hasn't been from the release. Only the blue one has been on stock very briefly. I want that ready to assemble version so bad 😂😂😂

@ohnoadventures 2 ай бұрын

👍👍😁

@johnlujan8706 2 ай бұрын

Well done!

@john_Lau_rc_adventure 2 ай бұрын

That’s awesome!!!!❤

@CM-ig2pf 2 ай бұрын

👍😁😎✌️drywall tape and E6000

@old-rcplane-phart 2 ай бұрын

I learned that from KZfaq too. IF a spot is missed, it'll show up 1st! Lexan lasts forever!

@CM-ig2pf 2 ай бұрын

@@old-rcplane-phart did that with my Xmaxx body. At a $100 bucks a pop you need to make them last as long as possible.

@ExocagedRC 2 ай бұрын

I've done that to Xmaxx bodies, but that back end still rips at least on those

@CM-ig2pf 2 ай бұрын

@@ExocagedRC you are so correct Sir.

@M_Verk90 2 ай бұрын

Ordered a set of the mounts, that body looks great on there! 👍🏼

@UrbanLegendRC 2 ай бұрын

The body and the mounts seem pretty tough

@christianrambissoon1141 2 ай бұрын

That body is sickkkk. I don't like the gorgon body but now i wana get one and body swap it. Love the "self righting". What other bodies have you tried?

@shyancole2490 2 ай бұрын

I really want to see someone make a video on trying to put a set of scx 6 rims and tires on a UDR just to see if they work and if they don't work and why

@fernsolo 2 ай бұрын

Nice 👍

@jonbraddock5545 2 ай бұрын

What is the brushless setup and pinion you are running for this insane setup?

@valtycun879 2 ай бұрын

THESE ARE AWESOME! GONNA PICK UP A PAIR FOR MY GORGON TODAY

@2WingSamebird24 2 ай бұрын

So cool. 🎉 I’m amazed at how great that bad boy looks. Great initiative man hats off to you. Maybe some mesh Sheetrock tape under the body with layers of shoe glue …. Maybe

@joshfowler197 2 ай бұрын

I have tpu body post on one of my crawlers way more durable than expected

@shuster1921 2 ай бұрын

"Like a Glove",,, Ace Ventura

@guymarotta2596 22 күн бұрын

It 's K I L L E R !

@crazylarryjr Ай бұрын

Is the spacing the same as the arrma 3s trucks as far as mounting to the shocktower?

@ExocagedRC Ай бұрын

I think so

@rctd3260 2 ай бұрын

Immediately reminds me of the old Gas Monkey Garage Monster Jam Truck.

@Jon-flame74 2 ай бұрын

Countersink the bolts on the body mounts 👍🏻

@ExocagedRC 2 ай бұрын

I considered that but the button heads won't spread the material as bad so I put a shoulder on the bottom of the Body posts to keep it off them.

@craigengelman1369 2 ай бұрын

Try a Pro-Line Volkswagen Baja Bug Body

@mikellewis2346 2 ай бұрын

Thats what i wanna see also. I love the bug bodys on basher rigs. There the best to roll an land on the wheels. And there strong do to he curve of the body.

@BangForYourBuckRc 2 ай бұрын

These body mounts look awesome! Do they have them for other vehicle types? Love the stage killer body . It’s just nasty! 😝👍🏻🍻

@ExocagedRC 2 ай бұрын

I’ve only made them for this one so far.

@craigengelman1369 2 ай бұрын

almost looks like the max d monster truck !

@heroicstriker 2 ай бұрын

I'd like to get a set of those mounts

@ExocagedRC 2 ай бұрын

They’re on the website.

@scottbray5936 2 ай бұрын

Dang it you show off these incredible mounts and they are sold out. JOE I NEED THESE 😂

@ExocagedRC 2 ай бұрын

printing more now and I have put 10 on the site.

@jngrccars89 2 ай бұрын

I love ❤❤❤❤

@allyoucando8486 2 ай бұрын

You need to try paddles you will live it. My Gorgon have paddles or awesome

@toolbaggers 2 ай бұрын

The body and ESC(!) will break before the mounts.

@timboles9480 2 ай бұрын

Do you have any plans to release the stl files?

@ExocagedRC 2 ай бұрын

I haven't even considered selling any stl files yet.

@timboles9480 2 ай бұрын

@@ExocagedRC id be intrested, i know there are many of us that now have capable printers but can't design well like myself

@cagerage21 2 ай бұрын

How are you liking the new 3d printer? Looks like it's going good!

@ExocagedRC 2 ай бұрын

I do like it, I have two of them now

@AllInRc1971 2 ай бұрын

I was so impressed with the Gorgon that I swapped it all out to Traxxas electronics, got 53 mph, stripped it, then gave it away. Kinda over the budget stuff.

@RcPlayer-tt2vw 2 ай бұрын

My parents would put fake prices on my toys comment reminding me 😂😂 I hear you I have 5th scales and I buy budget rigs myself , i gave my neighbors sx24 because they’re only 4 and 7 years old. I was always repairing it , Gordon probably be better

@MrTylerlang 2 ай бұрын

Brother the truck will break before those body mounts do.

@old-rcplane-phart 2 ай бұрын

😁👍🤪

@RcPlayer-tt2vw 2 ай бұрын

Of course you going break body if try , thing is body’s used be 20 bucks

@scottrichardson2124 2 ай бұрын

A Granite body works using the Granite body posts.

@rainstorm5245 2 ай бұрын

👍🏾👍🏾

@Wreckedekcoupe 2 ай бұрын

These look more stout then the almost the same arrma granite body mounts!

@mrstanton81 2 ай бұрын

😎👍

@mrstanton81 2 ай бұрын

Busted body, but the mounts 👌

@mrstanton81 2 ай бұрын

Flex seal tape the body for extra 🦾

@nunocarneiro464 2 ай бұрын

You should have tested them mounts on the old body dude , you didn't needed to destroy that brand new one 🤔

@ExocagedRC 2 ай бұрын

The old body was already trashed and glued back together

@annasoming 2 ай бұрын

just when was enjoying the crashes and the sounds of crashes.... hah. then you just land it on its feet

@mymom1824 2 ай бұрын

Mounts on site look much different than ones in video. Which one does customer get? Mount in video looks good; personally don't like mount in store. Keep up great content. Great stuff.

@ExocagedRC 2 ай бұрын

I updated the design so its stronger than whats shown in the video

@BigKidsRC 2 ай бұрын

Darn mounts are sold out🤨

@ExocagedRC 2 ай бұрын

printing more now and I have put 10 on the site.

@BigKidsRC 2 ай бұрын

@@ExocagedRC sounds good!!

@assjack1124 2 ай бұрын

Take my money!!!! smh

@2wheelLove 2 ай бұрын

It needs a wang on it! Itlooks killer!

@Jsmith9619 2 ай бұрын

Dudes

@ExocagedRC 2 ай бұрын

DUDE!!

@stevekelley677 2 ай бұрын

Hahaha...lol

@timmerz8569 2 ай бұрын

Any1 thts followed you knows u can drive lolthis crash fest is for science

@ExocagedRC 2 ай бұрын

lol Thanks!!!

@EJ-74 2 ай бұрын

Poor body 🙏

@dirtrider88 2 ай бұрын

$15 for one body mount???? ever for 2 thats a complete ripoff. i can buy a kraton 6s wing mount (pretty substantial piece) made of the same shit for less.

@curtisfauble1933 2 ай бұрын

There's 100s if not 1000s of guys selling the kraton and sledge mounts when they first where designed they where more just like these!