This Is How Apple Fixes Its Phones - Tearing Down Apple's Display Opener

Рет қаралды 268,788

Жыл бұрын

-------------------------------------Socials------------------------------------
Website: www.hughjeffreys.com
Store: www.hughjeffreys.com/store
Instagram: / hughjeffreys
--------------------------------------Links--------------------------------------
Get parts, tools and repair guides at iFixit:
Shop US: iFixit.com/hughjeffreys
Shop AU: ifix.gd/hughjeffreysau
Tools I Use: www.hughjeffreys.com/tools
---------------------------------------------------------------------------------------
(DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, l will receive a small commission.)

Пікірлер: 500

@ShadowWizard123 Жыл бұрын

Making the repair equipment unrepairable. It's like repair inception.

@rappdav Жыл бұрын

You just need apple's repair machine to repair this repair machine.

@Qwerty-uiop Жыл бұрын

@Josh Opray and apples repair machine to repair the machine that repairs the repair machine.

@Qwerty-uiop Жыл бұрын

@@VitaliyCD yes, you need apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine that repairs apples repair machine to repair the repair machine. Now my thumb hurts as I took 30 minutes to do this.

@Tamay. Жыл бұрын

Repairing screwdrivers

@deker0954 Жыл бұрын

The cult that hates it's god a bit.

@FloppyDiskMaster Жыл бұрын

I work for an AASP, Geek Squad, and boy let me tell you that the heat press is prone to software failure causing the unit to brick and become unusable. Apple takes its sweet time to send out new ones.

@HughJeffreys Жыл бұрын

Like what mine is doing or something else?

@tylern6420 Жыл бұрын

@@toadster40 wait a minute a heating press can overheat and brick itself? isnt that the one thing it should be protected against?

@tylern6420 Жыл бұрын

@@toadster40 that would be like a 3D printer that just totally burns the filament even if you set the heat to minimum

@stewartphillips Жыл бұрын

same here, our Precinct stays beefing with our heat press lol

@Danlapse Жыл бұрын

I’ve never had mine fail like that contact CSS or make an escalation they will replace the unit. But don’t get me started on the AirPod testing suite fml

@ljessecusterl Жыл бұрын

Former IRP tech here. We actually didn't have access to buy these till early 2022. We still didn't use them because the franchisee I worked for was loath to spend money on tools beyond what I absolutely needed as a gear snob. What's simultaneously funny and sad is that this video featured more info about this than Apple does in their IRP training.

@speckbomber7219 Жыл бұрын

Not really. U can find documentation about literally everything in GSX2 and in ATLAS

@cujoedaman Жыл бұрын

Hearing about people who have been told by Apple they can't repair a phone makes more sense now, they can't repair it because the machine is broken. Must be the same manufacturer as McDonald's ice cream machines.

@PWingert1966 Жыл бұрын

I wonder if it fails as often as McDonalds Ice Cream soft serve machines?

@HolyNorthAmericanEmpire Жыл бұрын

I'm always amazed and horrified how much thought apples puts into their devices to make them as repair-unfriendly as possible. These hot-pockets are just the cherry on top.

@charlesrodriguez7984 Жыл бұрын

That’s the smartphone industry for you look at Samsung too🤦‍♂️

@djashjones Жыл бұрын

Most manufacturers do this glue and clip thing as it speeds up assembly time and reduces cost

@vanhuvanhuvese2738 Жыл бұрын

@@djashjones Not All

@djashjones Жыл бұрын

@@vanhuvanhuvese2738 ok, changed it to most.

@SlartiMarvinbartfast Жыл бұрын

I do wish that people would stop buying phones from Apple, Samsung, etc who have these anti-consumer, anti-environment approaches, instead buy from companies such as Fairphone. iFixit has a repairability page which ranks the most popular phones. Easily replaceable batteries are also essential.

@scepter0143 Жыл бұрын

Is it not crazy to think that actual engineers were paid to make an iPhone objectively worse?

@Brato1986 Жыл бұрын

Engineers were paid to make many things worse for the sake of planne obsolesence, you need to than capitalism for it in the end and not the engineer.

@GareWorks Жыл бұрын

I think that's just a fact at this point.

@Qwerty-uiop Жыл бұрын

@@GareWorks yes

@ShitHappensRLY Жыл бұрын

I can imagine one of the next iPhones being a sealed-shut glass capsule, phone shaped, the only way to access into being to shatter the screen with 500 bucks worth of repairs to get a new enclosure and seal it back. And, like, touch everywhere, and no physical ports outside

@tjadejoh Жыл бұрын

@@ShitHappensRLYthey made it more repairable last year tho…

@BainMac Жыл бұрын

You need the official “apple official repair kit” kit, it comes in a container at 3 tons 😀

@kjfreeman1931 Жыл бұрын

would probably start at a base price of 3 grand plus 1.5k each for attachments and 500 just for the power plug 🤣

@PWingert1966 Жыл бұрын

and requires three semi-trailers, a police escort, a backup driver crew, a hydroline lift crew as it passes under. You also need to notify the FAA and notify the CIA of transport of encrypted material across state borders!

@alext6933 Жыл бұрын

I love to see you actually repair this and explain what went wrong with it.

@edwardfletcher7790 Жыл бұрын

It failed at the design stage...

@alext6933 Жыл бұрын

@@edwardfletcher7790 true enough

@speckbomber7219 Жыл бұрын

the firmware is outdated, he needs to update the firmware so the tool knows which iPhone it is.

@SlartiMarvinbartfast Жыл бұрын

Or if not then send it to one of the many KZfaq electronics repairers. I would have initially suggested the excellent 'Mend It Mark' but as he's in the UK that may not be practical. Another great repairer is 'Defpom's Electronics Repair' and he is based in New Zealand so that's much closer to Hugh.

@edwardfletcher7790 Жыл бұрын

@@speckbomber7219 The fact an Apple hotplate uses firmware & RFID rather than a 0-5 min timer tells you all you need to know about Apple....SIGH

@minimal_ltd Жыл бұрын

You could replace the mainboard/arm processor with an arduino. Figure out the desired temps and use the touch screen to control it. It would probably be more reliable than what's there.

@mishaproduction Жыл бұрын

The touchscreen looks like a nextion display to me

@MyszkoServe Жыл бұрын

@@mishaproduction For me too. It uses UART as there a only 4 wires. VCC GND TXD RXD

@mishaproduction Жыл бұрын

@@MyszkoServe the uart protocol that nextion uses is really simple. It's just directly setting commands to the device. Example: vis thelabel,1 (to make thelabel visible)

@MrNameloc Жыл бұрын

For the security bit, just use a flathead screw driver lol. Also works for security Torx, just need a small flathead.

@korosensei3932 Жыл бұрын

i did this, removed a security bit screw with a flathead....well made it non security bit anyhow

@walpoleandworcester Жыл бұрын

Love these teardowns even when it turns out fixing these things is more tricky than anticipated. Thanks Hugh!

@AngryYouAre Жыл бұрын

The deeper you dig the worse it seems to gets when it comes to tech conglomerates! Thank God we have people like Hugh Jeffreys who take the time to clearly expose their unfair and intentional anti-repair designs and schemes.

@unlokia Жыл бұрын

Your commentary shows you barely seem to have even the most primitive, cursory understanding of Apple.

@Yka4a4a Жыл бұрын

Could it be that those hot pockets are from another kit and they are software locked to a certain heating device?

@moe_1886 Жыл бұрын

Bloody hell! What a chunky machine!! I guess using this device means you're less likely to damage the screen/glass (or body) when removing it, and I assume it would be 'somewhat' quicker?? But paying USD100~ each, every year for the each new iPhone adapter tray, becomes a pretty costly/ongoing exercise!! Great little insight Hugh, thanks Mate.

@edwardfletcher7790 Жыл бұрын

What's the bet the individual phone repair manuals are only available as a subscription service ?

@Fireclaws10 Жыл бұрын

$100 a year for an upgrade to this thing is nothing for a business using this thing all the time

@edwardfletcher7790 Жыл бұрын

@@Fireclaws10 Your didn't listen, it's $100 per model !

@bassyey Жыл бұрын

That's 300 USD a year, 400 if they release an SE.

@Fireclaws10 Жыл бұрын

@@edwardfletcher7790 ok? that's pretty tiny for a business expense

@nathan_tasker Жыл бұрын

Just a thought that may have been missed. Try twisting the red emergency stop button on the front of the machine. It looks like it is pushed in. Once it is released it may work. It isn’t 100% assured, but I thought it was worth mentioning. Awesome stuff as always Hugh.

@HughJeffreys Жыл бұрын

Its connected to the power supply "on-off" switch. The unit wont even light up without it in the right position.

@raffy141 Жыл бұрын

@@HughJeffreys Did you check the Switch thats being pressed by the sled ?

@nathan_tasker Жыл бұрын

@@HughJeffreys no worries at all Hugh, it was just a thought.

@HETyoutubekanaal Жыл бұрын

1:22 he released it here

@nathan_tasker Жыл бұрын

@@HETyoutubekanaal thanks for pointing this out, somehow I missed it.

@edwardmunoz3398 Жыл бұрын

Nice video man your where I get all my information

@bobtahoma Жыл бұрын

The bit where you told us in detail about all the steps you took to remove the slightly stiff screw by using a bigger screwdriver, was edge of the seat stuff!

@patdry Жыл бұрын

Thank you for your work. Apple’s true “genius” is on display behind the scenes, under the hood, behind closed doors. Love seeing this stuff.

@Portergetmybag Жыл бұрын

Freekin love videos like this!!

@johnhardly5499 Жыл бұрын

I always love your content

@Todestelzer Жыл бұрын

I used my 3d printer heated bed for 2 phones with around 60c. Worked great.

@pablouribe1522 Жыл бұрын

Tearing down the tearing tool, we are going trough the rabbit hole... 😁

@daudmeer6852 Жыл бұрын

Apple's Repair Program is like you letting your sibling play the game but with a unplug remote

@mrrolandlawrence Жыл бұрын

indeed with a big screen like that you would think that they would display far more useful information. it could be a nice raspberry pie application to replace the non functioning boards inside & have a universal system. also the hot pockets could have adjustable sides to allow any phone to be used in the cradle. the system makes more sense if you are doing 100s of screen a day at a repair centre.

@kevinpeterman7127 Жыл бұрын

I was working at a company using a similar display for our equipment and there was no good reason we couldn't display useful error messages. The reason (not a good one) was we were using an off the shelf piece of hardware and didn't have people to write code to display a useful message. Apple, on the other hand, could have just stuck a phone on the side with the manual built in.

@Hailstormand Жыл бұрын

Watching this and listening to Hugh somehow makes me hungry.

@goonerjoe93 Жыл бұрын

Brilliant video as always

@banksiasong Жыл бұрын

Looks like something from the Soviet-era-and about as useful. Great Sunday viewing, thanks Hugh.

@alex15095 Жыл бұрын

Soviet-era equipment is lasting longer than the soviet union did. This piece of junk lasts shorter than a US presidency

@unlokia Жыл бұрын

What on earth are you talking about? Talking for the sake of doing so doesn’t guarantee wisdom will come out.

@sohigh10 Жыл бұрын

Fascinating to see!

@harpomarx7777 Жыл бұрын

Get a set of 'T" handle hex drivers, preferably with the ball tips so you can angle the driver somewhat. Inexpensive and well worth it.

@ethielurrea Жыл бұрын

That screw seems like an Torx Plus that many automotive manufacturers use, didn’t know of them until had to disassembly one maybe you can look out those and see if fits

@valkasolidor6727 Жыл бұрын

It also seemed to me that the torx bit he used was significantly too small even had it been standard.

@PWingert1966 Жыл бұрын

Heck you could create your own power unit for the hotpocket and an Arduin or even an ESP32 or if you want to get fancy a raspberry Pi replacing the original control board so easily and bypass all the crap and use a 555 time to set the time based on a keyboard input. I think hacking the unit into a useful reliable instrument would be worth the effort and make a cool video!

@taiwanluthiers Жыл бұрын

Now that I saw the video I think I'm going to get one of those hot plates. Apart from repairing my own phone, I do guitar repairs and it helps to pre-heat some parts before gluing, gives me more time to glue the part for one.

@EgorKaskader Жыл бұрын

The firmware's binary might be possible to dump from the chip, although I'm unsure how much - if any - help that might be; it's entirely possible that there's a way to simply write your own better firmware and flash it onto the controller, as it does seem like it'd be fairly easy to reflash.

@Raptor50aus Жыл бұрын

Did you perform a continuity test on the pocket's heating elements?

@zUltraXO Жыл бұрын

Heating elements are not a direct 0Ω short, they're just some oversized resistors, somewhere around 80Ω

@Random_4400 Жыл бұрын

You don't know how happy i become when i see that you've uploaded! honestly tho it always makes my day! Your are one of the very few youtubers who's channel has a special place in my heart

@phgodts Жыл бұрын

Looks like using military grade components (DIN connectors) and beefy steel doesn't matter in durability if you use high volatility CMOS in your microcontroller 🤣

@marcezs08 Жыл бұрын

If you look at it from a corporation/business perspective, apples over engineering and idiotic repair tools (looking at you battery placer tool) make sense though, it takes the human element out of the repair and basically guarantees the same level of service at every store.

@HughJeffreys Жыл бұрын

Now anyone can be a genius (genius bar technician that is.)

@_modiX Жыл бұрын

Those Genius "experts" would destroy your phone without these tools. 💀

@marcezs08 Жыл бұрын

@@_modiX only because apple doesn't care enough to train them when they can just make tools to make the process not dependant on the technician.

@unlokia Жыл бұрын

Duh! Why do you think MacDonalds designed and manufactured THEIR OWN bespoke equipment for the production of their food, and the most efficient use of space in their kitchens? A brand thrives or dies on known quantities; repeatability and uniformity. You must be new to processes and understanding mass production and repair. (see “time and motion study”)

@user-bp8yg3ko1r Жыл бұрын

If you need so many tools to repair a product, it's not repair friendly at all... You shouldn't need more than a screwdriver to repair a phone, what Apple is doing here is insane greenwashing to avoid complications with regulators. Brilliant video!

@DJcyberslash Жыл бұрын

At first I thought you were getting a great ebay deal, but then I realized there wasn't any delicious hot pockets in the box

@Akotski-ys9rr Жыл бұрын

Usually when it’s listed untested and it’s something easy to test it’s because they know it doesn’t work and just don’t want to say that

@omasagtstirb Жыл бұрын

Hi Hugh, I noticed your problem with the Display Opener. I think I know what your problem was and the errorcodes in the clip you showed, too. I worked as an AASP till a year ago. When you click in the hotpockets, you have to turn the red switch/button in the front it will spring out. Then begins the heating process, when temp is reached a 2 min timer will apear, after that an alarm starts and you have to push the button back in place. Another countdown will apear, at this point it is ready to open the phone. I am not sure about the manual, maybe I could help with that, but I am not sure, if i am allowed to share this confidential stuff.^^ PS: I am pretty sure the errorcode E4 means that the suction cup is not all the way up. I hope my memory is right ;) Keep up the good content.

@Akotski-ys9rr Жыл бұрын

I hope you get a working one and make a review on it though

@navinharbajan333 Жыл бұрын

Hey Hugh would you consider a resell?

@dash8brj Жыл бұрын

The repair tool that needs repair LOL! It obviously runs an os of sorts - look for a JTAG header or similar and see if you can get any clues when connected via serial. Or simply gut it, replace the cpu with a raspberry pi, enable the touchscreen and you'll have a one of a kind.

@dalemacdonald201 Жыл бұрын

I'm not surprised you struggled to loosen those screws with a screwdriver designed to open small electronics 😂

@unlokia Жыл бұрын

Clearly. 😏

@braakwame3810 Жыл бұрын

What’s the best battery to use as replacement for an iphone

@madcuzmadhehe7665 Жыл бұрын

"This Is How Apple Fixes Its Phone Repairing Kits - Tearing Down Apple's Repair Kit Opener Repair Kit" can't wait for this one

@thiagoferraz597 Жыл бұрын

Have you tested the emergency stop button? On video It looks like It is deppressed. That may be the reason for no error code

@M_cheese Жыл бұрын

The most likely culprit there is main board not NFC tag. (I may be wrong there, but by simple code and Arduino you can easily check if it's working or not)

@MyszkoServe Жыл бұрын

4:29 Its an UART Nextion Display. You can reuse it with an Arduino

@dwightthreepersons8074 Жыл бұрын

Thanks Hugh.

@MilesProwerTailsFox Жыл бұрын

I can build and arduino system for that machine if you want, but I would need to have it phisically in my house and that’s in Mexico, shipping cost is the same as the machine In a working state

@samzofficial7298 Жыл бұрын

An AASP Service Engineer here. I think your heat pockets are not good. It doesn’t detect a phone has been inserted. I use it every day and the only time I see trouble with it is when I turn it on and directly insert a phone into it without waiting it to be green. I absolutely love it as it makes my repairs easy and opening display like butter. I have never ever fucked up a display while opening. I have colleagues crack display and then they gotta pay for the display repair. With this machine I never had to deal with it. ❤

@YeahNoTellTheTruth Жыл бұрын

Wait, you have to pay for a display? Wouldn't touch it then without the machine.

@superowl91 Жыл бұрын

test the end stop micro switch. maybe if it dosen't know the carrige position it won't try registering the nfc.

@azmifarhan1257 Жыл бұрын

Before the Hexalobe screws on the repair tool was found Apple: **sweating like a waterfall** iFixIt: "Yes!!! Here we go guys!! We ought to know how repairable this is!!!" After the Hexalobe screws on the repair tool is found Apple: **heavy sigh of relief** iFixIt: "Alright! Time to make another screwdriver bit guys!!" Apple: "Oh crud." **sweats again like a waterfall**

@kennethpaulcalangi4122 Жыл бұрын

Seeing how complicated the machine is just to perform a simple task. Apple really knows how their devices are difficult to repair. Not to mention, this machine that seems getting errors is also hard to troubleshoot and/or repair

@SlartiMarvinbartfast Жыл бұрын

I think it's safe to say that it's over-engineered with a view to making Apple even more money by selling iPhone hot pockets and some kind of service contract. Apple is such a horrendous company, I wish people would stop buying their anti-consumer, environmentally unfriendly tat.

@juancartagena86 Жыл бұрын

Where can you buy that heating pad 8120A??

@nikitazaycev8636 Жыл бұрын

Looks like hexalobe is symmetrical, so with a correctly sized plain bit it should work

@dpogg1 Жыл бұрын

The mystery screw is 6 lobe (non security) Torx Plus

@tomspettigue8791 Жыл бұрын

If you have a 3D printer, you can just use your printer's bed to heat up the phone screen. I just got one, an Anycubic Kobra for $229, and replaced my iPhone's screen pretty inexpensively.

@NikolaiCherepanov Жыл бұрын

The difference between your tools and this screen removal tool from Apple is that it heats the frame of the phone not the display which in turn loosens the pressure sensitive adhesive much more effectively , it also minimizes heat damage to the OLED panel in the display.

@HEAVENSENT05 Жыл бұрын

Can’t wait for a banger video

@ingoenzmann666 Жыл бұрын

No fronts, but when i buy something damaged from a company that offer repairs i would guess it is unrepairable ;) Thx for your vids mate

@worthitrepairsbymark Жыл бұрын

I have one and its amazing I havent broken a screen since

@capolaya Жыл бұрын

That thing is the Juicero cold press of the screen heater/removers .

@Whigu Жыл бұрын

It would be funny if the problem would be just a pushed in safery stop button :-D

@Yoshomay Жыл бұрын

I like the new intro, no longer really long

@michaelodonnell5710 Жыл бұрын

Did you verify that all the simpler commodity components (like the microswitch shown on-screen around 3:01 with that arrow) are actually working? It's amazing how many microwave ovens are discarded because a simple microswitch like that has failed.

@tonitackerx9790 Жыл бұрын

This video sent me down a 30 min research about the wildest security screws.

@mrinaldutta1812 Жыл бұрын

Will s23 ultra board work with s22 ultra body n display?

@MateusHacker5048 Жыл бұрын

Love your videos keep up mate thanks for the content i am here since 3 years keep up

@mrinaldutta1812 Жыл бұрын

I broke my ip se2 so is it possible to use iphone 8plus, 7plus screen and body for iphone se2? Because if it works I will get a big screen please test and reply i need help

@theforthdoctor7872 Жыл бұрын

Looks like this thing was designed by Taylor. The guys responsible for the McDonald's ice cream machines. 😂

@NyahStuff Жыл бұрын

Those torx screws you mentioned looked awfully a lot like they need "torx plus" bits. Not really apple-specific, just obscure I guess.

@AnIdiotAboard_ Жыл бұрын

You should send this to Rossmann asap!

@macdaniel6029 Жыл бұрын

Can you just apply voltage to the heating pockets to use the suction cup?

@SlartiMarvinbartfast Жыл бұрын

I was thinking that too, although I guess the main unit is governing the heat level? Even so, it should be possible.

@vsn0747 Жыл бұрын

Would it be possible to wire up the heating element of your "Crazy" machine to that of the iPhone holder, and use Apple's repair kit just for holding it down and using the suction? I know it will be way too overengineered to do essentially the same thing, but I'd like to see it.

@PWingert1966 Жыл бұрын

I'd jsut put in a raspberry Pi or an Arduino and replace the boards completely. A few lkines of code and your good to go. It would be interesting to dump the ROM's and see what hte code actually does!

@Ssin1235 8 ай бұрын

I understand that for individual repair shop this machine is not ideal for budget. But for customers that pay Apple to fix their phone, this is actually really nice. Why? it basically eliminate any human error that could lead to damaging your phone. There was once I found my aluminum frame scratched after it got repaired from official Apple store. I spent an hour there arguing with the staff and despite I showed the photo I took before repair, they refuse to admit it was their fault. Eventually, I recalled that when they took my phone, the diagnose was recorded as no outer damage to observe, the manager came out to apologize and agreed to exchange my phone.

@paulsz6194 Жыл бұрын

Hi Hugh , looks like you need special repair tool , for the repair tool ! 😜

@djpushkin557 Жыл бұрын

I have been supplying these machines a lot to lot of repairs and its been booming quit good

@ryanturner9935 Жыл бұрын

It’s honestly annoying how they do this to consumers we should be allowed to do what we want to our devices

@Kizarat Жыл бұрын

I almost don't feel annoyed anymore because we're just that... consumers.

@ryanturner9935 Жыл бұрын

@@Kizarat we aren’t even classified as humans we are basically money banks

@Kizarat Жыл бұрын

@@ryanturner9935 Pretty much lol.

@ltpinecone Жыл бұрын

Apple: making consumer lives difficult since 2010

@normanfacy Жыл бұрын

It's like trying to repairing your dead battery with a F1 crew with the basic tools and smiles 🤭🤭

@simonwu7250 Жыл бұрын

Is this better than a heating pad I would think being so expensive it's a more surefire way to do this Perhaps other companies will make one that is much cheaper and not NFC verified

@srikanthsri178 Жыл бұрын

Can you make an omlet on your third party removal tool?? 😂😂

@kellymoses8566 Жыл бұрын

That thing reminds me of Juciero in terms of wildly over complicated devices.

@HulkHulkster Жыл бұрын

Apple is the height of our consumerism addition. We are so addicted and Apple are milking it.

@96ethanh Жыл бұрын

A few years ago, I was an apple guy.. huge fan of iphone and mac. While I still really like the apple software experience and hardware build quality, this channel has convinced me not to buy any more apple products in the future. I'm not ok with supporting a company that literally puts who-knows-how-much money into designing things such that they cannot be repaired

@kaoss999 Жыл бұрын

Did you check the micro switch that the plate hits and switches?

@HughJeffreys Жыл бұрын

Yeah it works

@PlanetRuncorn Жыл бұрын

1st thing i would have tested was the microswitch at the back of the machine when you insert the heating pocket

@cinobro6393 Жыл бұрын

If you can't get the electronics working at all you could always replace the control electronics with an arduino and RFID reader.

@zUltraXO Жыл бұрын

There's no reason to get a tool like this in the first place, it's way too unnecessarily advanced for what it should be

@batman-oq1vc Жыл бұрын

can i buy this defective tool from you please?

@artofverity8791 Жыл бұрын

Good video

@user-rg2gr7pk4g Жыл бұрын

is it a glue melting machine or is it a Tiger tank

@antinous1309 Жыл бұрын

So, if Apple’s iPhones are not actually self repairable, which brand should we be looking at that offer this option going forward?

@Feuchterbandit1 Жыл бұрын

I work at Apple and it’s nice to see how our Oven looks from the inside hhhhh

@topollillo6713 Жыл бұрын

Welcome back from ur holidays

@Tomaszbe71 Жыл бұрын

You can literally buy random heated bed for 3D printer, make some holders that work on every phone and a suction cup, to achieve the same effect

@mhtweeter Жыл бұрын

ooo new intro

@jingarjay8754 Жыл бұрын

I think this is easily hackable. Just completely bypass the "smart" part of this machine and directly hook up the power supply to the heater contacts. Sure you lose the timer function but at least it works and isn't a total paperweight.