This is IT - the NEW NCase M2!

Рет қаралды 13,886

Ай бұрын

Join me as I check out the new NCase M2 and the gunmetal gray T1 v2.5... and, understatement of Computex 2024, these are two really sweet looking cases. Although the M2 I saw was still technically a prototype, other than the color options at launch (the white is still TBD) this is pretty much the final rendition of the case. Full review will be dropping soon.
Offsite Computex Shenanigans:
For those of you that are curious, at the Streacom team's advice, NCase booked a room to serve as the venue to demo the cases. Surprise surprise, different floors of that same property turned out to be quite different.. the higher floors are quite normal hotel rooms while the lower ones are, would you say, more "purpose-driven"... Just another day in the life at #computex2024 I suppose.
My road kit this year:
Main camera: amzn.to/3KpGEAS
Wireless audio: amzn.to/3yMBlsY
The links above are affiliated, and I receive a commission from Amazon Associates whenever you make a qualifying purchase through them. Thank you for your support of the channel.
Check out Epidemic Sound if you are looking for music for your KZfaq content - my personal referral link: www.epidemicsound.com/referra...

Пікірлер: 79

@GlassPup Ай бұрын

W360 has a lot of work to do to gain my trust back.

@svn5994 Ай бұрын

Unprecedented quality despite the M1Evo being the pinnacle of bad design & T1 V2.5 being the pinnacle of bad QC. Oh yeah W360 is also an asshole. We test internally is a pretty big claim when he has a history of not testing at all.

@Aexeq Ай бұрын

Please take this with a grain of salt, but this is my perception: I think it's a bit sad to see so much corporate fluff in everything W360 is involved in now. Ncase isn't the same anymore, Necere, the original M1 designer left. SSUPD law case. FormD split up into all the original people including the original designer, 3FC on one side and W360 on the other side. FormD still sells the V2.1 with just silent improvements, everything still compatible, while Ncase is now selling the case under the Ncase brand with a name that implies the case is much better after wanting to cancel the T1 initially because it wasn't "moving the needle". It's just sad to see all the great people along the way getting burnt after working together with W360.

@koyawag848 Ай бұрын

w360 sucks ass after all the sff dramas

@BRSxIgnition Ай бұрын

100% this - really sucks that one individual has their claws in so many cases, and also ended up serving as a negative influence to all of them.

@mastersirus1985 Ай бұрын

@Machines & More Bit outside your video norm, but I would love to watch a breakdown of this story

@Aexeq Ай бұрын

@@mastersirus1985 I would be surprised if M&M would do this. He's obviously on good terms with W360 right now and taking into account all the objective feedback on this topic would let W360 sit in a fairly bad light afaik.

@MachinesMore Ай бұрын

I have not heard from either side regarding the topic, and in fact I actually don't know any of the details regarding this, just that there is controversy. This is really unfortunate because we are talking about some really neat cases here. I would be just as enthusiastic to cover the "FormD" version, but they have not reached out to me. So even though I have zero primary knowledge (on or off record) of this dispute, I can comment from my personal experience - NCase has always treated me professionally, they handle the media relationship with integrity, e.g. I have never been asked to sugarcoat anything in my reviews, if anything I have been asked to be forthright and honest. The moment I am asked to be anything than 100% forthright in my reviews is the moment the relationship is terminated with a brand or manufacturer. Many of you saw my M1EVO coverage and the pain points I called out - they took that in stride and committed to improving on that. So that's what I do know and can share, and that's why I am willing to give them the benefit of the doubt in continuing to cover their products, at the same time I fully respect any consumer and their purchasing decision based on whatever their perception is. My content does not thrive on negative buzz unlike some media outlets, but if it is productive and constructive to the community, I am absolutely willing to arbitrate or mediate a discussion, if anything to provide clarity for prospective customers, I am all ears. Separately, I did see the SSUPD lawsuit brought up- obviously that is something that could not be resolved without the involvement of a higher power, so I think it would be unwise to make a decision based on that until it is finalized. As many of you know I continue to cover Lian Li and SSUPD products as well. I hope that provides some color into some of the concerns.

@Sirgreen57 Ай бұрын

Genuinely super disappointed to see you refer to the Ncase T1 2.5 as a FormD T1 considering how messy the split between Ncase and FormD has been and that FormD is still selling the T1 2.1 with superior machining and tolerances alongside Ncase's 2.5

@BRSxIgnition Ай бұрын

Not to mention that W360 called the 'Ncase' T1 2.5 despite it having much worse tolerances. All they did was make some superficial changes to call it a different case while spitting 3FC and FormD.

@BRSxIgnition Ай бұрын

Please take another look at the W360 situation and determine if you'd like to continue supporting them. He originally wanted to cancel the T1 but now is selling it under Ncase as the 2.5 with worse tolerances and quality, while the original designer at FormD is still selling the original, better quality 2.1 T1. It seems like every case manu or designer he gets involved with gets burned, first SSUPD with the Meshlicious, then 3FC with FormD T1, and now Necere with Ncase M1/Evo.

@sparkplugbarrens Ай бұрын

What was the problem with ssupd and meshlicious?

@BRSxIgnition Ай бұрын

@@sparkplugbarrens I believe it was a legal dispute over aspects of the case design and construction, essentially the IP of the Meshlicious.

@svn5994 Ай бұрын

@@sparkplugbarrensIP royalty payment problems & some other stuff. They agreed on his payment and then never paid him what they both agreed to AFAIK.

@Aexeq Ай бұрын

"Smoother anodisation finishes are harder to make" it depends. The longer you anodise a case, the rougher it gets, so if the smoothness is controlled by anodisation length, it's cheaper to make and overall a less robust surface. If better smoothness was achieved by a finer grid of sand/bead blasting, then maybe it may have been "harder" to make, but I really don't see it personally tbh.

@humanity_3 Ай бұрын

W360 decided to remove the EVO from the naming but kept NCase? 🤣 What a clown lol Is there ANY case manufacturer that didn't have issues with W360? Necere did (Ncase), 3fc did (Formd), SSUPD did

@BRSxIgnition Ай бұрын

Yeah - it's all coming off like a grift at this point. Gets involved in the development of all these cases, makes promises they can't keep, gets called out, causes drama, leaves, repeats.

@chrisrussellca Ай бұрын

You inspire me man, Hope to get my channel to your level someday!

@frederickpolk Ай бұрын

I enjoyed the video! Thanks!

@murderbymodem Ай бұрын

I loved my original NCase M1, but my M1 Evo was an absolute nightmare to build. I wasn't a fan of the build process, nor the documentation that was available for early adopters (maybe this has improved since, I don't know, and it wouldn't be of any value to me now that I've already struggled through the build)

@rockzors Ай бұрын

Yeah i have regrets with my M1 Evo as well for these same reasons.

@MoarCoffeePlzzz Ай бұрын

Please do not move away from the iconic angled sides that Ncase was known for. Rounded sides with mesh makes it look like everything else.

@rare6499 Ай бұрын

My thoughts exactly

@TheTastefulThickness Ай бұрын

Gotta breathe though. Reason everything is collapsing into that design.

@AlphaXray Ай бұрын

Evo ended up sucking unfortunately. Still kind of disappointed in my purchase.

@zhardy323 Ай бұрын

man you definitely overtook my top pick for best itx channel now. bravo on the video

@markdavies981 Ай бұрын

I love the FormD T1. I have the original reference model, which (I believe) is now discontinued. The only thing I don't like about the T1 is the feet. According to this video, it would appear they are still using the same soft rubber feet. I'm surprised to see that. The rubber is way too soft, and it wears out in no time, exposing the metal underneath. Mine wore out in just a few months of occasional movement, so I replaced the original rubber feet with some new ones I found on Ali Express. The ones from Ali Express (that are extremely inexpensive) are about the same size, with the same M3 screw fitting, but are much harder wearing. I find it surprising that a high-end product like this is shipped with such poor-quality rubber feet.

@winkleberg. Ай бұрын

there better be a discount for those that bought the stupid M1 Evo 1.0.

@ricardovix Ай бұрын

Does it fit an MSI 4090 Liquid and aircooler (thermalright axp90-x47)?

@m3lodeth Ай бұрын

Where's them Peerless Assassin 135 mini review at? Been waiting for a while now, cause obviously you're the most credible person to a review on it cause you can extensively compare data from other 135 coolers.

@Fighting-Egg Ай бұрын

matx with 360rad possible? if not, matx board with dual 240/280 possible?

@robertmorrison4020 Ай бұрын

Now Im torn between this new ncase or the Era 2. can you swing by Asrocks booth and check out their itx boards?

@Adel-sj4ue Ай бұрын

U want itx intel or amd??

@RangerAmateur Ай бұрын

Totally different animal to me. If you want better compatibility and best in class space utilization, hands down the Ncase. The biggest point for Era 2 would be aesthetics and availability.

@robertmorrison4020 Ай бұрын

@@Adel-sj4ue dunno yet, gotta see prices

@TheTastefulThickness Ай бұрын

Era 2 is kind of a lower quality case in disguise. The body isn't unibody for one thing.

@andrewjphillips Ай бұрын

Did you ask about the NCASE FF1??? Did you see it?

@michaelmonroe5034 Ай бұрын

It is a nice case, but I think... they have some adjustments to do for sure

@wb31921 Ай бұрын

On a side note thanks for posting this, it reminded me to check their website to see if the front panel USB-C adapter was back in stock for the T1, it was 😊

@nicholaseales Ай бұрын

V6.1 m1 still best

@alu4626 Ай бұрын

are they gonna release glass side panels for the t1 2.5?

@Aexeq Ай бұрын

The glass sides from 2.0 and 2.1 also work for the 2.5. I think 3FC plans to get those out again as fast as possible. As for W360, no idea if he got a supplier for that, after he parted ways with the FormD team.

@alu4626 Ай бұрын

@@Aexeq i hope they will be soon available cause i've been waiting for months.

@PickingBlueberries Ай бұрын

I like this case a lot. That said, I wish for a smaller version with max GPU length 250mm (big enough for some RTX 4070 supers). This would case length length by at least 3 inches.

@NoWayNick Ай бұрын

These cases are almost never in stock and the "mach kit" for the M1 evo still has no release...

@Adel-sj4ue Ай бұрын

What i really wish in m2 Is to support 2 120 or 140 top and bottom fans while using matx motherboard Also to add the ability of sandwich orientation where gpu on one side while the aio rad on the other side of the case This would be the ultimate case ever If do so❤❤

@RangerAmateur Ай бұрын

You are looking at Jimu D+ for that kind for modularity.

@Adel-sj4ue Ай бұрын

@@RangerAmateur 1st time i heard about this I will look at it Thanks man

@svn5994 Ай бұрын

Awful case for the price sold by a shady company. @RangerAmateur

@svn5994 Ай бұрын

Just get a different case then.

@Adel-sj4ue Ай бұрын

@@svn5994 do u have any sugestion for matx sandwich case

@pctechadvisor Ай бұрын

Looks a lot like an E-Coating they use on custom keyboards… edit: should have watched longer LOL.

@markfelton3484 Ай бұрын

what about the ncase ff1?

@TheTastefulThickness Ай бұрын

Streacom has a landing page for it.

@svn5994 Ай бұрын

Freeflow & it hasn't been released.

@bobbymoss6160 Ай бұрын

You think they'll charge $250 to match the greed scale... I meant inflation.

@nonchalanto Ай бұрын

What is greed exactly in this context? Are you greedy for wanting a bigger paycheck for whatever work you do? If the price is too high, people won’t pay it. The only real greed to speak of that makes sense is government greed, which takes unearned money from people to waste it and line their corrupt pockets. Then they print money and cause inflation, which is an unlawful tax that disproportionately affects the poor and middle class.

@maxweinbach3996 Ай бұрын

@@nonchalanto Not sure which government you are referring to but, "printing money" spurs growth if the economy is not growing at its target rate. Recent inflation is caused by volatility in energy prices, supply chain issues, low productivity, and high wages (putting it simply). Inflation is still high despite high interest rates tells you the issue is not really printing money.

@nonchalanto Ай бұрын

@@maxweinbach3996 Yea, that’s garbage Keynesian nonsense. That’s the same guy who thought you could solve a depression by burying money in holes and paying people to dig it up. Wealth is not contained inside of money. Wealth is the summation of goods and services; money is just a medium of exchange. Printing money always causes inflation, by definition. It increases the money supply without a concomitant rise in goods and services. Many governments around the world did the same thing: shut their economies down, printed money and paid people to stay home. That is partly why it’s a global phenomenon.

@maxweinbach3996 Ай бұрын

@nonchalanto did you just ignore my very last sentence? High interest = low money supply, yet we are observing resilient inflation. The cause? Refer back the my comment

@nonchalanto Ай бұрын

@@maxweinbach3996 the statement “printing money spurs growth if the economy is not growing at its target rate” is false. Interest rates being high does not mean the fed hasn’t been printing money like crazy in the past 3 years. It absolutely is the cause of inflation-maybe stop watching MSNBC for 5 seconds and parroting Biden’s campaign talking points and think logically about this. There’s no situation whereby printing money doesn’t cause inflation. The fed has been printing money. High interest rates isn’t proof that the fed hasn’t been printing money… the rise in interest rates supposed to be their method of curbing the inflation they caused. It’s not proof that the inflation was caused by something else…

@YoloVib3s Ай бұрын

Well I wasn't originally interested in this case but .... Now I'm definitely buying it! is it inverted layout only? Also did they give an ETA on the M2?