This is NOT your average case! v3000+

Рет қаралды 345,751

Жыл бұрын

Today I take a look at the MASSIVE Lian-Li V3000+ Computer tower! This thing is NUTS!
Check out Micro Center’s PC Builder: micro.center/fbg
Submit your Build to Micro Center’s Build Showcase: micro.center/dca
Visit The Micro Center Community: micro.center/cmy
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2JayzTwoCents

Пікірлер: 1 800

@Azurko Жыл бұрын

Jay, I think I speak for most when I say that we need a massive build video in this case. ALL THE FANS!

@Tomthemadone Жыл бұрын

i was waiting him the whole video to build it

@SevericK_BooM Жыл бұрын

And in less than 2 videos in less than 3 months

@arnox4554 Жыл бұрын

> Biggest home desktop case in the world. > Still no 5.25" drive bays. 0/10

@asdf51501 Жыл бұрын

How about as many fans as he can fit, consistent with the system being usable for ordinary people?

@umbles7007 Жыл бұрын

I would love for this to be the next skunkworks

@darkness_120 Жыл бұрын

Do your personal build in that case with everything you can throw at it, and film the whole process, and release the videos step by step until the build is finished, that should give hours of content and I'm quite sure we would all love to see that here

@irispettson Жыл бұрын

A build deserving of the new X3D processors.

@smokyz_ Жыл бұрын

I don't think it would be hours of content, but if he stretched it, then probably a couple hours could be done.

@irispettson Жыл бұрын

@@smokyz_ A solid three videos seems possible depending on the scale and to what detail he's going into the build. If he went into really customizing the case, I guess that could be another video. So 1.5 - 2 hours of content?

@DaleEarnhardtsSeatbelt Жыл бұрын

Yes

@DarthChewie Жыл бұрын

Project done by 2026!

@sonotsrry1 Жыл бұрын

I think it’s fair to say that all of us that have been watching you for so long, want to see you do your personal build in this. Skunkworks was the whole reason I wanted to do custom water loops in the first place and why I now can’t build without a custom loop.

@noneofyourbusiness4294 Жыл бұрын

Yup. This thing has Skunkworks written all over it. We need that build

@TheScania1991 Жыл бұрын

The form factor alone takes me back to old old Skunkworks. I'd love to see you do a build in this, especially your personal build. Hardline tubing and all that goodness *.*

@AlpineBishop Жыл бұрын

I swear to God a compilation of only Phil's laughs, wheezes, and actual deaths by laughter would be an hour long.

@Cumfortable Жыл бұрын

Can we get an upload of that compilation? 😆

@zldsar14 Жыл бұрын

+1 for the compilation 😂

@enthusiasticpaunch Жыл бұрын

Yes. Please.

@Mervinion Жыл бұрын

Be prepared for more than an hour when some crazy dude makes a compilation. Props for this crazy dude 🤣

@kevingaukel4950 Жыл бұрын

I think Phil has a lot more than 9 lives for all the times he died in the background.

@JKG_Brandon Жыл бұрын

I would love to see a "Maximum Absurdity" style build in this Behemoth. Just the largest most insane components possible lol You could probably mount a dang house box fan to cool it

@dashtesla Жыл бұрын

new epyc 9000 or at least threadripper pro 5995WX and 2 gpus (just mgpu support, no need for sli) plus intel arc for encode possibly on that second board

@rcortez5979 Жыл бұрын

Check out YT channel 'Bro Cooling' with their V3000+ pc build its just 1 month ago video. Its the best existing build yet

@jonathanmcclenathan9776 Жыл бұрын

All the rads

@machetevuoi8026 Жыл бұрын

Don't give him weird ideas, Linus already lost a carrot to an industrial fan xD

@HirXeBomb Жыл бұрын

Lian-Li really is leaving a big mark on 2022 cases wise, holy moly! 😲

@B0BBYGAMER Жыл бұрын

Target clearly on the corsair 1000d that's aiming high lol

@TangoDown357 Жыл бұрын

I love when Jay's genuinely excited about a product review. You can almost imagine his tail wagging back and forth as he talks about the rad space lol

@StonedViper101 Жыл бұрын

Jay's reaction to the Phanteks Enthoo 719 is the sole reason why I bought that particular case. His reaction to how amazing the water cooling potential is and how he called it "a water coolers dream" Jay had me sold haha

@GerrusEdits Жыл бұрын

i just really appreciate and adore the level of goofy and sillyness of jay and phil while also combining it with professionalism and knowledge for what you guys do, its just amaizing , i had such loud outburst of laughs in this video i cant even describe it , awesome video you guys!

@1TheIceman1 Жыл бұрын

Thats the genuine passion for their "jobs" and this sector. They love, no, live this and it shows.

@GerrusEdits Жыл бұрын

@@1TheIceman1 yea indeed, love these guys and what they come up with :D

@LaxMan2k Жыл бұрын

Jay, if you build in this case I think it would be awesome to have it look like the old “pipe” screen savers with crazy perpendicular runs. I know how hard that is but it would be such a cool idea.

@saizn9sr Жыл бұрын

I remember building in the V2000 many years ago. That was THE case, although it had zero wire management, the build quality was second to none. I would love to build in a 343 or the 777 anniversary just for the nostalgia.

@wjjohn Жыл бұрын

That case is a beast! I designed a server off a Lian-Li case I was going to design my new home system after it. But now I might change everything after this. Thank you Jay!

@the_hamrat Жыл бұрын

That looks like a good spiritual successor to the old Skunkworks case. I know you want to redo the old Threadripper build in its case, but if Intel ever released a new HEDT platform this might be the case to do it in

@lordzooka Жыл бұрын

Great case. Looking at Lian Li's website, you should be able to rotate the motherboard tray, effectively putting the GPU vertically mid case and have another radiator space in the back for a 360 or 420. Love it.

@XBullitt16X Жыл бұрын

A new Lian-Li case ? Ok now this I'm pumped for, always great to see what they come up with. I don't think it's an understatement, to say they're arguably and in my opinion the best case makers on the market right now, in terms of quality, look and ease of use to build in. P.S yes, you gotta do a build in this case

@krukis98 Жыл бұрын

We NEED this build Jay. We need ALL the fans!

@Mad_Man_Dan Жыл бұрын

This case gives me caselab feels when they were pushing out monster-size cases with insane customization options.

@thereallantesh Жыл бұрын

I love it! It's crazy ridiculous overkill, but yes please do a build in it. As for the option to build a second system in the case I could see someone using it to house both their main PC, and a NAS server.

@Threesnap Жыл бұрын

Damn that's a good idea the only problem is I think a ITX motherboard might be a little crap for a large nas

@thereallantesh Жыл бұрын

@@Threesnapnot a large nas, but you could build a decent size one.

@kanethomo2483 Жыл бұрын

Definitely keen to see a crazy build in the case!

@yourfavoritetrex Жыл бұрын

I'm so excited to see what jay does with this case!

@HotRod_Dad Жыл бұрын

This should go in a no compromise watercooling build video or series. I’m in love with it!!!

@meddlin Жыл бұрын

Love seeing a giant proper ATX case back on the channel 👍

@aldrind0686 Жыл бұрын

That is massive! Can't wait to see a water-cooled and air cooled build with this beast, Jay.

@TheRealLink Жыл бұрын

Man that's gotta be at least as big as my SMA-8. Loved the builds you did with that, Jay, so had to get one. So many options with this case though! Great review.

@hybrid9mm Жыл бұрын

This case is all about options and I love it. Dual system with a triple loop cooling system just because you could. Once my parts where decided I’d customise the panels and mountings to maximise airflow.

@jondolar126 Жыл бұрын

I did love huge cases like that as I always tried to maximize rad usage. But it gets heavy and difficult to build in. Done it many times. But since I switched to a small case with two external MoRa with 200mm fans, I never want to go back. It's just quieter and easy to maintain. Besides that it is a nice case and quality looks fine, so if you are looking into something of that size, it'S for sure a good choice.

@itscrikey Жыл бұрын

I wanted one of these the moment I saw it! I've been wanting a dual system case for ages and none of them got me as excited as this beast. I currently have two cases (O11D XL & O11D Mini) on my desk.

@SilentNoSeven Жыл бұрын

I would really like to see a full custom waterloop build in this.

@SeanLewandowski2010 Жыл бұрын

From what I see in the official video by Lian Li, this case like the upcoming O11 EVO XL has a fully removable motherboard tray. With the Phanteks D140 distro plate on the rear fan position that would make plumbing the CPU and GPU tube runs an absolute breeze.

@dtrcServerinfo Жыл бұрын

I absolutely love the wounded effect yall put in the video

@zaph2o Жыл бұрын

Jay just totally fan-grilling for this case is good content!

@def5100 Жыл бұрын

Please add water cooling everywhere in that case and attach as many fans as possible (noctua industrial) and lets hear and see the beast perform

@BOZ_11 Жыл бұрын

you'll need extra long cables for fans/psu cabling etc, since distance between components is insane

@Sol_Divisive Жыл бұрын

This is my biggest problem with my Corsair 1000D... there's only one guy who makes extensions for corsair fans with RGB on ebay and they're pricy. I needed something ridiculous like 400.00 in just extensions so that I could cable manage everything "cleanly". I just can't bring myself to do it, it feels too over priced.

@K1Crawford Жыл бұрын

I love Phil's editing!!

@bra55ic_gaming Жыл бұрын

build in the damn thing please jay im drooling over this case

@asdf51501 Жыл бұрын

Phil is a treasure! Give him more screen time and a raise. Definitely a raise. 😁

@Karhald Жыл бұрын

Agreed! More Phil!

@SupremeRuleroftheWorld Жыл бұрын

or a stool

@revelxtion6326 Жыл бұрын

*i see you phil* xD

@Najolve Жыл бұрын

Phil should be the designated filler for water-cooling system so Jay could "Phil it."

@sun4nicolya Жыл бұрын

Special thanks Lian-Li for ITX mount in it! Great sense of humor 🤩

@robertlane5022 Жыл бұрын

How is it a great sense of humor? It's point is so people could have a second functuonal small format build in it. Some people use the dual system for streaming, some use on system for productivity and the other for gaming while the other is working on whatever its doing without affecting either rigs performance

@sun4nicolya Жыл бұрын

@@robertlane5022 ah, ok. But anyway mini-ITX inside this garage 😄

@Nareimooncatt Жыл бұрын

@@robertlane5022 I would still love to see a mini-ITX only build in this just for the fun of it.

@2XS Жыл бұрын

I really would love to see a dual system build in this case! Of course with full custom loop(s) and filled up with fans to the roof!

@Sabot1313 Жыл бұрын

I really like the horizontal mount cases like the Thermaltake cube series

@1.0xY.m0r0n Жыл бұрын

I've got an 011 XL and I agree that it's overused, but it looks so clean. It's also a dream to build in and being able to fit 3 360mm rads is nice. I'm hoping Lian Li releases an "evo" version of it soon.

@praetorxyn Жыл бұрын

I also have one, but I didn't at all enjoy building in it because of cable management. Those HDD cages in the back just get in the way, and I found it a chore to fit everything in that little gap between the side radiator and the HDD cages. I ended up switching to a Phanteks Eclipse P600S so I could use 140mm fans and it was so much more enjoyable to build in.

@odhinn9 Жыл бұрын

Definitely overused but clearly for good reason

@praetorxyn Жыл бұрын

@@odhinn9 I don’t think the XL is overused, only the original O11 Dynamic.

@RngmonsterX Жыл бұрын

Well, the o11 is cool but also boring.. since i went for the enthoo 719 / pro, i'm so happy using 2x 480, 2x 360mm radiators!

@1.0xY.m0r0n Жыл бұрын

@praetorxyn I took those out first thing. I could definitely see how they would get in the way though!

@thisismelsemail1217 Жыл бұрын

I bet you LianLi would be more than willing to send you a set of custom long length cables for their fans so you can use the fans in this case. EDIT: I would love to see a build in this case just for the fact that I wanna see how amazingly clean the cable management would be with 12+ lianli fans running off a single controller.

@eugenesalvador1418 Жыл бұрын

I need this Jay energy on every video!

@efnick96 Жыл бұрын

Reminds me of my cm cosmos 2. That case was so overkill for what I wanted to add to it but it was so good having the room for extras.

@BaLLisTiKaLFPS Жыл бұрын

DO ITTTTT Jay! Build in this!

@justicekreider2978 Жыл бұрын

Lian Li literally said "hold my beer" 🤣 I was deadset on wanting to get the o11 XL ...........but I may have found my Dream Case

@Dominian1 Жыл бұрын

The O11 is definitely over-used, because it's awesome. I got two in my living room right now. Wouldn't dream of building in anything else, unless I fell into a pit of money and could go for a four rad watercooled system, just for the heck of it. Lian Li is killing it with the fans, the AiO, the cases, the strimers and even the software.

@EvL--_-- Жыл бұрын

Lian-Li was THE dream case like 20 years ago, they where some of the first premium cases to be found world-wide, I remember just dreaming about a Lian-Li ALU case back in 2001-2002 :)

@riseandshinemrfriman5925 Жыл бұрын

Gotta love big towers. So massive, so much space for tech and air flow. Just delicious.

@aaronb9630 Жыл бұрын

Lian Li has climbed to top tier over the last few years. Their machining is precise and there engineers do a great job of thinking out possible issues and resolving them before manufacture. I love the Dan A4H2O, small form factor capable of a 12700k + 3080ti FE build. I hope they lead the way in making RBG into a simple addition rather than the current headache it seems to be.

@ic9046 Жыл бұрын

this is the case i've been looking for!!!

@doodskie999 Жыл бұрын

Just like spongebob and patrick, a box can bring so much joy and unlimited possibilities

@onslaugh7pc Жыл бұрын

This has to be the first case ive seen in ages where I have genuinely wanted one at first sight, its awesome bring back monster pc cases, I pride myself on having a pc that realistically shouldn't be moved by one person.

@djtribo8925 Жыл бұрын

Amazing! I smell a new personal rig with this case! It reminds me of a modern Case Labs case!

@johnsmith-qz4bv Жыл бұрын

that is a great looking case with tons of options..i think you should do a build for us in this case..

@andystech5223 Жыл бұрын

Love the V3000. Skunk works was reason I subscribed and started watching. was never able get a massive case tho the TT X71 has served me well for 7 years now.

@kollarking3264 Жыл бұрын

Jay, saw you at Disney today and didn't want to bother you on your vacation. Love the content. Have a great time.

@frozezone22 Жыл бұрын

nice upgrade from my original v3000. will buy as soon as it comes out

@JLC1987 Жыл бұрын

I would actually love to see a video of you building with this case!

@MrSg654 Жыл бұрын

Build it to the max. I am 59 and just recently built my first PC and used a Lian Li O11 Dynamic XL with a 360 AIO and 10 fans. Love Lian Li

@andnukem Жыл бұрын

Having completed multiple large builds with complicated loops… External rad with quick disconnects is 100% the way to go. Easier to service, maintain, and you don’t heatsoak the inside of the case.

@iuliancostea8160 Жыл бұрын

This case deserves at least 1 build in it :) Do it Jay, would be fun.

@joelmcgrath6212 Жыл бұрын

My first build i did myself was in an antec 1200. Overcompensating for nothing in a big boy case is the way of life. I totally get why you love it

@gordo1701e Жыл бұрын

Personal build in this PLEASE!! Would love to see this thing in action.

@pixelpoppyproductions Жыл бұрын

Back in around 2001, I got the Lian-Li cube case (probably nobody knows what that is). It was meant for servers, and was basically double the width of a standard ATX case (and held 2 power supplies). It was perfect for the experimental water cooling of the time, I mounted my pump, reservoir, second PSU (for peltiers), and radiator on one half, and the PC components on the other. And yeah, it was heavy…. I really wish I still had it. Never thought Lian-Li would be well known after all these years, it was totally unknown back then.

@wilko2907 Жыл бұрын

Good reason why lian li dynamic range is so popular it’s the best case out there by a mile especially for that price range

@demonspawnedangel Жыл бұрын

Finally! A case I might upgrade to over the 900d. Still lacks a top psu mount option.

@thescrub5001 Жыл бұрын

YES! Please build in this case. Also what would be cool is make a full game room box. Beast pc with a ps5, Xbox series x and switch all in one case. You for sure have the room to make that work

@FredThirteen Жыл бұрын

This case absolutely deserves a Skunkworks Revival!

@FenrirYT13 Жыл бұрын

I love big cases also. gives me room for what I wanan do and I dont need to worry about shoving things or moving things around

@Bass_therapy_ Жыл бұрын

Man can’t wait to see a build on it

@droopysloopy Жыл бұрын

I may have found the case to replace my enthoo primo with. It's about the same price and has some extra features that i like. Thank you Jay.

@anthonysmith6913 Жыл бұрын

Reminds me of one of my first builds in the early 90s having a huge case.

@lurkinwolf2489 Жыл бұрын

You can also turn the mother board tray around and mount it in different ways. I like the face down look in this case, that’s why the grommet is besides the psu

@nicholasbaldwin1674 Жыл бұрын

Yes!! Build it! 1 system. Crazy overkill! Insane cooling! I would love to have a no limits build in that case.

@jadams2289 Жыл бұрын

We're ready for a Jay overkill watercooling everywhere build!

@nathanwolford9364 Жыл бұрын

I would love to see a massive custom loop system in this case! I think you should make it happen Jay!

@nathanallred859 Жыл бұрын

I love how excited Jay is about this case! Sometimes hes forgetting to breathe haha

@OdaFluff Жыл бұрын

It reminds me of a modern version of the Cooler Master Haf series, the 935 and 915 stacked. I love the heck out of that case and use it for a Plex server!

@tims3822 Жыл бұрын

A couple of ideas for builds: 1) “ALL the water cooling” 2) “A reasonably extreme gaming & streaming build” 3) “My entire living family tree gets a new pc in one case” 4) “The ULTIMATE super sff pc plus an efficiency apartment for Phil in one case” 5) “Air cooling is SO easy” 6) “I built an every purpose PC/Vending machine”

@thisjustanother Жыл бұрын

hell. i am still rocking with my thermaltake core x9. love the case for the reason of the horizontal motherboard layout

@nykz2358 Жыл бұрын

YES Go absolutely crazy on this one

@dimitriblaiddyd1845 Жыл бұрын

I really love this case actually thinking about buying one. I just wish there was more hard drive storage.

@MrHaggibear Жыл бұрын

Loved to see the announcement for this monster of a case. Seeing this "in person" kinda just upped the excitement for it. Only gripe are the fan mounts... Did they really need to put THAT many different options for mounts on there and essentially block like 50% of the fans airflow? Makes you wonder about the noise too...

@demineon4966 Жыл бұрын

I want to see a build in this case, I like the options and less wasted space compared to the Corsair 1000d

@T3chWarrior Жыл бұрын

You could pass in water lines from other cases to use the radiators in this case. Looks like the perfect case for a cracking rig. Been with Lian Li since 2001 when I got my PC75, they make the best cases.

@Pinedsauce 5 ай бұрын

i just ordered my V3000 Plus because of this video! I was a huge Corsair 7000D fan boy for the last 4 years or so, and contemplated the 1000D But This review really showed me how similar this case is to the SMA8. The amount of radiators i plan on putting in this thing is going to be ridiculous lol Amazing video Jay and Team!

@bjornarruud Жыл бұрын

I would love to see you build in this case 👌

@JockMcBile 11 ай бұрын

I picked up this case last week. Can't afford to water cool right now. But I'm finally learning how to build My own PC. I'm nervous but excited.

@Bannana-Smile Жыл бұрын

i just love Phil

@W1nt3rFox Жыл бұрын

By far the funniest episode in a while, what a monster of a case. I would absolutely love to see you build an overkill watercooled pc in this.

@itisfreak Жыл бұрын

Sup grummett

@alexandermarken7639 Жыл бұрын

It is huge, love it.

@digitalmike330 Жыл бұрын

I still rock Lian Li's PCV1000 as my media server. I've had it for 15 years and won't ever give it up. They just don't make them like they used to.

@boosted94sc300 Жыл бұрын

Yup this will be the next case for me. Replacing my view 91. Love the cases with rad mounts on the bottom.

@PatParni Жыл бұрын

That's RAD! thx @JayzTwoCents

@Matsw007 Жыл бұрын

That case is a beast! I definitely would get that Lian-Li case

@ShartSydePhil Жыл бұрын

I had a Cooler Master Storm Trooper about ten years ago that I absolutely loved just for its sheer size and ease to work with. If I had the room, I definitely would have gone with another super tower for my last build