No video
This is RodBuilding Episode #1 Saltwater Foregrips
Рет қаралды 17,432
Күн бұрынIn the first episode of “This is RodBuilding,” Gary gets to work on rebuilding a saltwater rod. He shows how to rebuild a Saltwater foregrip using different techniques and plenty of American Tackle products. He goes through the entire foregrip rebuild from picking the Eva handle, trimming it down to size, reshaping, glue-up, and finishing.
Make sure you subscribe and ring the bell, so you don’t miss any future episodes
www.Americantackle.us
Facebook: / americantackle
Instagram: / americantackle
Twitter: / americantackle
TicTok: / americantackleco
American Tackle Rod Building Group: / atcrodbuilding
If you have any questions please reach out to us:
Phone: 1-800-516-1750
Email: info@americantackle.us
@edbrameister6313 Жыл бұрын
Thank you for showing how to do this. I been trying find out for years.
@AmericanTackle Жыл бұрын
No problem!
@truecustomrods6937 Жыл бұрын
Your welcome buddy! 😊
@famfishingtvmoisfishing9843 Жыл бұрын
You guys are giving away all the secrets! I love the mineral sprits trick for the grips.
@AmericanTackle Жыл бұрын
You bet!
@bcbassfisherman437 Жыл бұрын
This series is gonna be awesome! I love that it is so easy to follow and understand !!! Gary Delivers it all perfectly!!
@AmericanTackle Жыл бұрын
Glad you enjoy it!
@isolationrods821 Жыл бұрын
Really enjoyed this. Looking forward to the series.
@ryankutzbach9142 Жыл бұрын
Best video I've found on installing EVA grips! Thanks!
@ChasingGrounders_ Ай бұрын
Good stuff!
@garypugh5008 Жыл бұрын
GREAT Video Gary!!
@truecustomrods6937 Жыл бұрын
Many thanks! 😊
@chris.catignani Жыл бұрын
Good stuff....video was well done.
@AmericanTackle Жыл бұрын
Much appreciated!
@MudHoleTackle Жыл бұрын
Great tip
@AmericanTackle Жыл бұрын
Glad you think so!
@sharonwalgamotte9831 Жыл бұрын
Loved this, and the tips along the way
@EvolveCustomRods Жыл бұрын
Love it!
@AmericanTackle Жыл бұрын
Thanks!!
@miosvalsten2704 Жыл бұрын
Your the best at this
@truecustomrods6937 Жыл бұрын
Thankyou Mio!
@dorflonnigan4413 Жыл бұрын
what kind of thread carriage are you using, could you do a review on it . It looks interesting. great video
@truecustomrods6937 Жыл бұрын
Al engling custom made!
@colterschwenke1240 Жыл бұрын
Great video, very informative!
@truecustomrods6937 Жыл бұрын
Thsnkyou 😊
@barryd.thomassr.9156 Жыл бұрын
Outstanding Video! Your style of Teaching is Superb! Very Thorough , giving good Info in a Easy flowing manner. Fully explaining every Step. pressure fitting grips was how I was taught in Both the Classes i took here in Cape may Nj 1994 and again in 2004 as a tune up. Will be saving these Videos as a teaching aid to pass on to others. Thank You! Tight Wraps!
@AmericanTackle Жыл бұрын
Glad it was helpful!
@barryd.thomassr.9156 Жыл бұрын
@@AmericanTackle i am a retired Rod Builder and have watched many instructional videos
@AmericanTackle Жыл бұрын
@@barryd.thomassr.9156 Awesome!!
@truecustomrods6937 Жыл бұрын
Many thanks Barry! 😊
@kingklabe Жыл бұрын
Nothing highlights my immaturity more than my reaction to, "bell-end", being used in a professional setting. I did however find this video extremely helpful. Thanks!
@Trixboomer Жыл бұрын
Solid.
@mikehyfz450 Жыл бұрын
That was a awesome video, thank you Gary for the tips and tricks. I can't wait for more videos like this, and as always thank you American Tackle!
@AmericanTackle Жыл бұрын
More to come!
@truecustomrods6937 Жыл бұрын
Thanks Man 😊
@lelandshanks3590 11 ай бұрын
I've seen guys years ago put shaving cream on blanks to fit foam grips like you just did.
@joerobles7703 Жыл бұрын
I love this video and helped me a lot in my future build sadly it had to end
@mal88301 Жыл бұрын
Thanks for the great video, the question I have is about the thread carriage what brand is it and where do you get them
@reeltime1 Жыл бұрын
Awesome video. I was wondering how much reaming you did on the grip as the rear slid further down the blank when you were putting your marks. Also how much smaller is the I.D. of the grip compared to O D. of the blank.
@truecustomrods6937 Жыл бұрын
No reaming, this grip is a tapered ID, but even if it wasnt this method will work! 👍
@joereid8557 Жыл бұрын
what is that thing you used to cut the blank! that screw on thing on your vise, i love it!
@truecustomrods6937 Жыл бұрын
It will be revealed in the tools video, but yes its amazing! Top tip: MTB handle bar cutting tool!
@fgreen411 Жыл бұрын
It's a Park Tools SG-6
@anonymousanonymous7311 Жыл бұрын
Great content!!!! When you mentioned epoxy applied to the grip is that rod thread wrap finished or the type of epoxy used on reel seat?
@truecustomrods6937 Жыл бұрын
Rod wrap finish 👍
@alasdairfyfe8792 Жыл бұрын
How do you fit and align reel seats on to stand up rods. Do you fit the ferrule for trolling butts after rod guides are on? What do you do with a Heavy duty saltwater reel seat?
@truecustomrods6937 Жыл бұрын
Hello Alasdair, i choose to do the guides first then glue the ferulle on the back with an alignment tool, tape it untill its dry.
@alasdairfyfe8792 Жыл бұрын
Thank you
@guamanfish Жыл бұрын
1 question: What’s the thinner inside the grip for? Insert after completely dry or semi-dry?
@BeardedWeirdoFishing Жыл бұрын
Wet... it helps make the grip pliable and slip on super easy
@guamanfish Жыл бұрын
@@BeardedWeirdoFishing thanks for the clarification! Will that not affect the hardening & adhesive property of the epoxy?
@BeardedWeirdoFishing Жыл бұрын
@@guamanfish not at all
@guamanfish Жыл бұрын
@@BeardedWeirdoFishing awesome! Good to know, thanks!
@AmericanTackle Жыл бұрын
Don is awesome!
@joereid8557 Жыл бұрын
what do you use for cleaning fluid?
@truecustomrods6937 Жыл бұрын
It depends on the job, Acetone for stubborn stuff, Alcohol for most jobs
@laukei1 Жыл бұрын
@truecustomrods6937 truly gerat vid mate, I just love the whole series. Could you tell us what "dirty thinner" you use?
@markmaynard3884 Жыл бұрын
What thread carriage is that?
@donaldrosin4077 Жыл бұрын
Can you use alcohol for the pressure fit?
@user-vs8yj8oy2v 2 ай бұрын
I hope i never snap my rod.shes a vintage fiberglass peice they stopped making in the early 80s
Jim Hanley’s Fishing Charters and TV Show.
Рет қаралды 3,7 М.