This Is What Goes On At Fab Rats Between Big Projects!

Рет қаралды 334,866

Күн бұрын

#fabrats #fabrication #diy
Today we tie up a few loose ends and get some projects done! Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More vids you'll love:
CLOSE CALL! We Almost Burned Our Shop Down!
• CLOSE CALL! We Almost ...
Demolition Derby Car build:
• Demolition Derby
Wrecker Games:
• Off Road Wrecker Games
A Test Drive In The Snow Takes A Chilling Turn!
• A Test Drive In The Sn...
We Should've Known Better Than To Do This!
• We Should've Known Bet...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Пікірлер: 599

@steelmill Жыл бұрын

I like how Paul shows the young guys a trade that the can take through their lifetime.

@John13Edge Жыл бұрын

Paul is showing the boys for bases for almost all the trades….no matter what trade they go into or even if they get someone else to do some work they will know what’s going on….

@lyndonwortley6329 Жыл бұрын

Always good to see or hear someone asking questions and then listening to the advice and answers given. Well done to both Paul and Hunter.

@masterbates7016 Жыл бұрын

Paul has a great student. Makes teaching hunter worth it for him for him because he is actually listening and picking it up.

@masterbates7016 Жыл бұрын

@@John13Edge that was the best gift my dad ever gave me. Most are jealous of my knowledge in the trades and how I can do most myself some I just don't like to do

@masterbates7016 Жыл бұрын

@@John13Edge that was the best gift my dad ever gave me. Most are jealous of my knowledge in the trades and how I can do most myself some I just don't like to do

@marthasellers4125 Жыл бұрын

When it comes to teaching, Paul is a natural instructor. Another great video.

@SpatialDragon Жыл бұрын

Hunter, even mig welding takes practice and experience. It is almost foolproof, but not 100%. No one starts out perfect. I am glad to see you are learning some stuff beyond swinging a camera.

@adamholt6898 Жыл бұрын

Don’t tell Robbie, but when your video drops, I hop on over to watch your video first, even if I’m in the middle of his. (Just happened)

@0714will Жыл бұрын

😆

@jackcampbell6779 Жыл бұрын

Same thing for me but for matt's offroad

@travisbuckner8511 Жыл бұрын

Me too lol

@0714will Жыл бұрын

@Adventures Of The Times Tiffany not a gud speler..😆

@francesrice7898 Жыл бұрын

This video is perfect. No rushing, just doing everything calmly. Landon and Hunter make the videos more fun. I bet grandma knows a lot about repairing vehicles. She’s an awesome mom and grandma. We love her. Happy Mothers Day Grandma and Michelle. ❤️🙏🙏👍👍❤️

@jaredwebster3620 Жыл бұрын

I love that they both tease the heck out of Hunter and also jump in and teach him welding techniques!

@paulhall170 Жыл бұрын

Grandma Lolly know what transmission fluid is NOT supposed to smell like LOL Great to see Paul and the gang graduating Hunter into more skills that he can use for the rest of his life!

@treborheminway3814 Жыл бұрын

Wow, 1st Paul teaches him up on welding thin stuff, and later actually compliments him. Hunter must be in shock. I like these little bit of everything vids.

@peeco33 Жыл бұрын

Today's video was pretty cool. I felt like I was right there hanging out with you guys in the shop. Hunter should get more camera time, he's a natural. I enjoy the shenanigans and how its just unscripted. Also, Paul you are a good teacher, showing all of us how to get stuff done! I've been watching since day one Great stuff

@brockryan3405 Жыл бұрын

i REALLY enjoyed the helping Hunter. Both the welding tutorial and the supporting his family. He's a good person to have around and I'd do anything within reason for him.

@sethwolpert1391 Жыл бұрын

I love how Paul is still chewing on his derby performance. Not hard on himself or anything lol 😂

@byronlabelle7569 Жыл бұрын

Hunter's idea is because he pays attention to the Fab Rats, Paul and Ben so he keeps the wheels of his brain turning. Also glad Paul is willing to help Hunter learn how to MIG, but he did say he could do stick pretty good. Thanks to everyone at Fab Rats for these cool vids.

@markcole6460 Жыл бұрын

Hunter is lucky to have someone with as much experience as Paul has showing him something that took years to perfect.

@justpain365 Жыл бұрын

Paul it's really great seeing you takin the time to show the young ones how to do things[the important lil things ] & then lettin them do & show what they learn! It shows what he sees every day that's for sure.. y'all Cox boys are awesome in my books! Anyway have a great day and as paul would say " don't hit the pink things" lol till next time.. 👋 🐌☕🐢

@psg6314 Жыл бұрын

Jeepster next to the shop

@randymiller7521 Жыл бұрын

Teaching the youth. One of my favorite episodes right here 👍. Great job Paul letting him take lead on that weld job.

@stevez340 Жыл бұрын

Paul is so smart showing patience with the kids because he knows that everything he allows them to do will make him look that much better😂

@donaldfrazier5244 Жыл бұрын

For a camera guy your a pretty good welder,that’s a nice compliment from Paul,I really envy you guys,nobody I grew up around did this kind of stuff! You are truly blessed!

@theburtseoni Жыл бұрын

Just some ordinary every day jobs to do, and it is good to see how you guys can even make some 'slow' days still fun and enjoyable! We need an update on the new shop addition too!

@marvincarter870 Жыл бұрын

Matt and Ben are great teachers breaking Hunter into welding is awesome and showing him the correct way of doing it is professional.

@davidingram353 Жыл бұрын

Every so often you need a day like that just to get things back on track.

@denniscleveland669 Жыл бұрын

I’ve switched to copper anti seize, because it stays put and doesn’t wash away. It’s a bear to get off the skin, but it works.

@ernestrodriguez4659 Жыл бұрын

Heartfelt moments like this are to be cherished by all. I certainly have. Moreover, that ratchet extension is so long that Paul can unbolt a header from Idaho while eating a basket of fries!!!! 😂

@lockout6896 Жыл бұрын

So cool to see Paul teaching hunter how to weld.wish I knew someone like Paul or Ben when I was growing up.

@KrisD007 Жыл бұрын

Right? Too many skills are not taught to the youth…

@jaysom2240 Жыл бұрын

More videos of Paul teaching. Hes very good at explaing how to do things with his blunt approach. Keep up the good work everyone. Great job.

@donwilliams3626 Жыл бұрын

I wonder if the transmission failed within the seven minute warranty period?

@adventurechannel67 Жыл бұрын

😆

@Bigdaddyslasher Жыл бұрын

That smile on Ben's face when Paul missed with hammer was priceless. This means that it isn't the first time that's happened, and he knew not to stand so close. I smacked my big brother in the leg, swinging a hammer on a hammer wrench. Oh boy, was he mad at me, LOL I never hit him again after that.

@lorendecker6672 Жыл бұрын

Right on, I believe watching fab rats fix a variety of different things in one video was beneficial and enjoyable. 😎

@Tomcroese Жыл бұрын

Yes, you fixing all the stuff on the to do list for that day!

@lonhoschar1943 Жыл бұрын

Good video!!! I love doing a whole bunch of little projects in a day. Always makes me feel like I really kicked butt getting things done! LOL!!

@dougalexander7204 Жыл бұрын

Thank you for the welding lesson. A young man learning from Paul would be something to tell the grandkids. Hey Ben, stay awesome. Like snoopy, you don’t have a lot to bark about, just getting the work done. And, hi grandma. Take care of yourself and watch after the kids.

@genelivingston5161 Жыл бұрын

Paul reminds me of my Mentor that I had 50 years ago. Calm and patient, made the learning easy.

@chipprice1174 Жыл бұрын

Hunter is like one of Pauls boys, give no slack, but teach them in the process.

@jasonbullock7237 Жыл бұрын

Paul, watching you teach Hunter, but letting him DO it, was awesome. Well done sir.

@TimsBitsnPieces Жыл бұрын

It's great how you guys are teaching Hunter as well as showing him the skills he needs....

@kmgflavin Жыл бұрын

one of the best vids! You make me feel guilty sitting here watching KZfaq instead of out there working on my own vehicles! lol

@kolt4d559 Жыл бұрын

Awesome seeing Hunter learning to weld while helping his brother out. Sick work

@lanceleavitt7472 Жыл бұрын

Pretty sure I spend more time planning to do a project than it take Paul to just DO the project. --- Thanks for the fun upload. ---

@stephenmuir203 Жыл бұрын

I LOVE HOW GRAMMIE COMES RUNNING TO SEE WHATS GOING ON EVERYTIME THERE IS SOMETHING SOUL RATTLING LOUD! ROOTS RUN DEEP!!😂

@xxBlazinBobxx Жыл бұрын

Got some helpful stuff stuff done for yourself, for Hunter with some thin metal MIG training 6:04, and and for Wyatt who gets his exhaust tidied up at the family discount rate. Wyatt also learns his Nissan can do a burnout! All-in-all, it was a good day in the shop!

@angiecox3146 Жыл бұрын

😂🤣

@tomhall9212 Жыл бұрын

Ben, I would say use anti-sieze when you have two different metals, like stainless and regular steel and on any alloy like aluminium or magnesium. Oil and grease work great on a steel to steel connection.

@IR-nq4qv Жыл бұрын

2 words..."Michelle's Jeepster"

@michaelrobbins9679 Жыл бұрын

Mentoring is how true skills get developed! Classes teach you only so much.. reality teaches what you need to know!

@Big-chub69 Жыл бұрын

It's great how you all work together and positively support all your efforts when doing any job, Great Teamwork FABRATS!!!😊

@chrissuich7423 Жыл бұрын

Thanks for the welding lessons. We need more edutainment like that!

@rockyrichards4290 Жыл бұрын

I love Paul as a teacher! Good job!!

@joshuarobinson7522 Жыл бұрын

That's awesome to see Paul teaching Hunter how to weld, its very cool to see uncles (Ben too) that take the time with their nephews to teach them a valuable shop skills like that.

@ITubeTooInc Жыл бұрын

Hunter is not related to Paul and Ben at all, evnen though they share the same last name: Cox.

@RandallGreenwood3 Жыл бұрын

The ultimate thing to do is take your gang, Matt's off-road, trail mater and Robby Layton and build the coolest off-road vehicle love the vids 👍🏼

@joeeyman7503 Жыл бұрын

Paul, Sir you should have been a shop teacher. Your knowledge and abilities to explain are truly one in a million. I still want to sit next to Grandpa and watch someday., maybe nap too! 🤣 Your whole demeanor is contagious, love it! ❤️🙏😎🤙🛻💨

@psg6314 Жыл бұрын

I've welding for years and still have troubles without burning a hole into thin metal great video keep up the good work God bless from GA and stay safe

@electrontube Жыл бұрын

10:00 Hunter, welding (like many things) is about setting aside your ego and just practicing and learning from your practice. You're lucky my guy, you have people there who want you to get better and are willing to show you how. keep on rockin in the free world.

@vwharman Жыл бұрын

Solid video, more laid back and loose, nice casual video. Great to see hunter learning!

@jeepman5982 Жыл бұрын

I know, more than anyone, that the small jobs need to get done, but if your out of projects (haha), there seems to be a Jeepster laying around there with Michelle's name on it. Getting it started for Mother's Day might be nice, just sayin'.

@iricecom 6 ай бұрын

On the farm, we used 6011 rod. We used other rods for special occasions. But 6011 was our 'go to" rod

@CraftyCarvyBicycles Жыл бұрын

When your ME-MAW knows what cooked ATF smells like PRICELESS.

@jamesbigham9036 Жыл бұрын

Paul you are a good teacher in my opinion I will be honest getting an opportunity to learn welding from you would be a lot of fun. I really enjoyed this video getting all the small projects done and out of the way.

@harrybrown4296 Жыл бұрын

You guys hit the ball out of the park with the boat salvage videos, that game warden was on a power trip and thank you for taking him on. All the guys in your views are cool , Ben (new mechanic), Hunter, your mom, kids, Papa Dar, cousin Merlin, Michel not so much.

@anthonylee2099 Жыл бұрын

Nice video on a fixing a bunch of thinks. Good job Hunter on welding the exhaust. You have to start somewhere. You saved your brother some money! Great job teaching/ Showing Hunter how to weld, Paul. HI ya Ben😎

@129673jh Жыл бұрын

Hunter is a good kid...high potential...love his sense of humor...

@josephpuou96 Жыл бұрын

That’s a productive day guys 👍 love those TCI transmission pans 👍 Aloha from Hawaii 🤙🏽🌴😎

@calvinlevie943 Жыл бұрын

Thank you, weather is getting nicer, pretty nice picture of your spot over there in God's country, keep on making videos and bringing us along

@rhondasweeney7271 Жыл бұрын

Congratulations guys you got all the past projects taken care of!

@TheOldaz1 Жыл бұрын

Great to catch up on all the little outstanding jobs around the place. My only problem is by the time I fix all the busted stuff, there's no time left for the project, lol.

@DKThedriver Жыл бұрын

You guys NEVER disapoint....

@brenttrozelle2224 Жыл бұрын

I wish we could see how the progress is going on the new shop. Please!

@akelkhunter Жыл бұрын

Liking Hunter more and more as he gains more skills. Not afraid to have himself filmed as a beginner getting more lessons. Good attitude, funny and more comfortable all the time. Great kid.

@edwinschlee8374 Жыл бұрын

You need to catch up on the little things every once in a while! Good welding practice Hunter.

@jefferyyoung6836 Жыл бұрын

Back in the late 1970’s I worked for a major auto testing fleet. We had a fleet of 18 wheelers that would break wheel lug studs all the time. They were running 150% of legal loads. We started using anti-seize and ended the failures overnight. The anti-seize helps on the threads but it’s really for the face between the nut bevel and the wheel rim. This prevents metal galling and allows the nut to fully tighten up without jamming into the wheel before it reaches full torque. If used correctly it will be much better than oil that can encourage the nut to work loose.

@drumorrison7625 Жыл бұрын

If you watch the beginning of the video, it sounds like Paul says "Beef". No clue why it made me laugh so much 😂. Thx for sharing.

@JMC9837 Жыл бұрын

Dump trailer tip...Put a block inside the hinge and push the door back against it bends the door right back into place!

@kevinm3059 Жыл бұрын

That is some great instruction by Paul on welding the thin stuff!

@xvsj5833 Жыл бұрын

Paul “Fab Rats”💛 always keeps you on toes with interesting content 💛 Thank you ✌️ 🚒Jesse

@mikehuven6600 Жыл бұрын

Love the humor and teaching on this channel

@rightwingmanscott Жыл бұрын

Been welding and fixing for real close to 50 years now. It's a great life but I can cuss some words that would keep your editors busy. Actually you might only get 5 minutes a day that aren't bleeped. Part of the job!

@toddgibbs1321 Жыл бұрын

The way you guy work on cars, makes me feel way better about myself.

@raktoda707 Жыл бұрын

"No problem " the mantra you all live by...you are the most amazing people

@aarontwiss8119 Жыл бұрын

I like how Paul shows them how to weld without criticizing them

@stevemiller3082 Жыл бұрын

Man I grew up in a tire store. My father taught me the same set of skills, however my dad yelled a lot more than Paul. Hunters dry delivery is absolutely hilarious and someday I hope he and Lizzy arm wrestle for a charity or something. All the little comments on being allergic to silicone are hilarious as well- again I grew up hearing that stuff everyday. That extension paul used is for people who don’t like getting too close to their work! Much fun and I can’t wait until the next one. Be safe and thank you for sharing your family with us 😊

@Regolith86 Жыл бұрын

Hunter vs Lizzy? That's not a fair fight man. Can't believe you'd want to set Hunter up to lose like that. 🤪

@michaeldichiara5121 Жыл бұрын

Hunter you are a lucky man! Paul is teaching you skills that you can use all your life.

@brockness7133 Жыл бұрын

Love this kind of stuff! Really need a “build breakdown” video on the wood truck!!! Love any/all of what we have been shown of that beast and it definitely deserves its own video! It definitely seems like a realistic version of something that most of us are capable of cobbling together to have an awesome square body!!!

@curtis.stevenson7626 Жыл бұрын

in little towns like Glendale where everyone is connected to everyone else either thru blood, friendship, or church it is remarkable you ever get time to work on your own projects

@idaholandwhore Жыл бұрын

Hunter welding his brothers hooptie. True love!

@tedhockstad243 Жыл бұрын

Love it when Paul teaches the youngins. Also when Ben does as well. Showing them the force 🙏

@dalestone8619 Жыл бұрын

So glad you had the safety prop in place while you were welding the tongue.

@davebenson1504 Жыл бұрын

Paul being a great and patient teacher... Hunter is very lucky...

@roytiller4537 Жыл бұрын

Thank you for everything you do , much better than regular TV. lol I wish I could be there, I'd work /learn for free just feed me once or twice a day and I'd be good. lol

@jaketrask8409 Жыл бұрын

I love it. Not once, not twice, but three times in one video with the 5 foot extension. I might need one now.

@orangepickel2 Жыл бұрын

I think it's safe to say that Hunter is now very exhausted on exhaust repair.

@tubeu28 Жыл бұрын

By teaching Hunter ,you also teach us. Thanks Paul!

@mjc8248 Жыл бұрын

Xterra's with broken exhaust always sound like tractors, and this one didn't disappoint.

@Chongy28 Жыл бұрын

Good job hunter. Trying is what counts. Just this past winter, boss asked me if I could weld some new rockers on one of the old work trucks. My response was I don't know but we're going to find out! And I'll be darned she turned out mint!

@bentleyoakguy Жыл бұрын

Love Ben backing up and grinning at the camera when Paul is swinging the sledge. That there was an older brother that "trusted" one too many times...

@andrewgilbreath1331 Жыл бұрын

Good stuff teaching Hunter to weld, wee need a shop build series though.

@dongoff6762 Жыл бұрын

I have been busy an not been able to watch fabrats as often as I want and may have missed Pappa Dars sleeping in the chair. I have a thought, 😮 I have been known to do a little sleeping in the chair in my shop also. Well I was thinking if you and Matt an the boys ever have a (Sleepin in the chair in the shop Olympics) I want in. I realize Pappa Dar is a tested and true athlete but I think I might be a ok 2nd place. I'm kinda good at it. Been known to stack some wood an even snore so loud the dog had to go out in the driveway an lay under the truck to get away from the noise. 😢 Just a thought!!!!! Well keep up the good work an keep us all smiling 😊 Thanks

@Maults_Mayhem Жыл бұрын

Finally a Nissan in the shop. I love these vehicles. All the parts from the Titan to all of them are interchangeable. Putting the Titan suspension on the other platforms give you long travel. Even special Titan swap shocks you can get.

@jamessmith7691 Жыл бұрын

Nice teaching the youngun how to do welding. You guys have more fun than law allows.

@jcnme Жыл бұрын

I truly like how Paul & Ben Help everyone and teach the young men how to do things. ❤

@hendrickson674 Жыл бұрын

I really enjoyed this video. Really took me back to when I was a young man hanging out in the barn doing all kinds of little tasks with my father. It’s how I learned to weld and use all kinds of tools. It’s funny how all those small jobs add up to an entire day or two of work .

@coltin4803 Жыл бұрын

There's nothing better than making sparks and melting metal... And every now and again getting a burn or 2 lol. Welding is one of the most useful tools a person can learn. Nice job hunter practice makes perfect.