Definitely on the expensive side, however that being said its one of those mods to a 5th Gen 4R that should have been stock and this guy went through a lot of prototyping to make this product available to the community. So, if you can spare the coin for this mod its a must have indeed! I'm impressed! 👍

Vikings Garage is a great source for valuable information. Thank your wife for me for pushing you into the KZfaq market. I ordered and installed this product. Yes, a bit spicey on pricing but this is American ingenuity, American made and those are two great reasons to spend the $$$. The fitment was as described in your video. Looks great. Appreciate the security.

Cool product, but $75 is a ridiculous price point

Great mod - I ordered one and also posted this KZfaq link and the Esty link on the 4Runner forum. Good feedback and purchasing activity from the members. Thank you VG!

I just purchased this. Quick delivery. Great fitment. Easy installation. I am very pleased with this purchase. Anybody with a 4Runner should purchase this. Good luck with your business. Thank You Charlie

Both you guys are awesome, thanks for the knowledge!

This is awesome! Thanks for showing this, I've always wanted to cover that section, but not quite handy enough to fabricate myself. I just ordered myself one 👍🏼

I bought this cover set from Matt’s sight and they are perfect. The look and fit is awesome! Thanks Viking Garage for this video! 🍻👍🏻

Just got mine yesterday and installed thia morning, so far so good. Tried to use a drill which was an option as per the included instructions, the bit just kept slipping so I did it exactly how it was installed in the video with tape as a marker and a right angle bit driver use 1/4 inch nut driver and worked out well. Thanks for sharing this video, was exactly what I was looking for now if only matt can make a low profile set of drawers which don’t cost over $1000 like the other companies I’ve seen so far.

Just ordered mine, looking forward to installing it and cleaning up the rear of my 4 runner! Thanks for the info

I bought this when you dropped the video. This product is awesome!

Went & ordered it before I finished watching the video, thanks for the amazing find.

I just had this video show up in my stream and I didn't even wait till the end of it before I ordered one!

I ordered mine need to install today thank you so much!

Very cool - I'll definitely have to pick up one of these. Sold my 2006 Sport in Magnetic Grey with 220K miles for a new 2022 TRD ORP in Lunar Rock this year. - Love it.

JUST WHEN I THOUGHT I WAS OUT....THEY PULL ME BACK INNNNNNN (with another MOD) ... looks awesome I will be ordering!

I made one of those about a year ago. It took some time but i really like it. Cost me about $30 for a small sheet of ABS plastic and a tube of ABS glue to glue on the "hooks" on the bottom. It did take some time to get the shape right.

The Shift boot is banging! I will be doing that.

Just ordered this. Looking forward to getting it installed.

Nice! Just ordered it. Can't wait!

After putting 250K on my beloved '06 my husband found a '15 Trail with low miles - How could I resist!! But wow - the interior was a bit of a surprise and not as well finished as my '06. Thank you so much for this... I am ordering mine now!

Great addition, might have to order one!

Really like that shifter boot mod.

Instead of a latch, they could have also used magnets, one on each side of the panel.

For the little cover I used 5lb double sided tape and a plastic hook you can buy in packs of 6 to make a handle. Works awesome and now I can access the bottom of the panel without having to remove the upper section.

Received, installed and loved

Awesome mod!! Very clean look...that's what I like.

Thanks dude I ordered it can’t wait

Thanks for sharing. Just put my order in. Hard to pass on functional mods like this

just pourchased thanks for making this!

Just ordered mine, Much thanks...

Nice cover need to get one

Thats a NICE easy mod. It's completes the back, makes it look neater. I have already installed the canvasback brand side covers to protect the plastic wheelwells and sides when carrying wood or gear. First time I put wood in back I discovered it scratched easy and ordered them. If you dont run the canvasback's this mod cover of yours is the way to go for sure to keep all the misc junk in the cubby hidden. Love it.

This is fantastic! My order is in!

Exactly what I was looking for

To answer your question, "Are you done modding your 4Runner?" Let me check my wallet... Not this month. Although, I just ordered those covers... :)) Those are great mods! I really like what he did, especially relocating the dongle socket. Those covers are awesome. I don't tow as much as I do make those dangerous Costco runs. Because I have Bilstein 6112s in the front (at the lowest setting) my rear ended up being a bit too low, so I added 25 mm spacers in the back. That way, I avoid pissing off on-coming traffic at night when loaded up. Unloaded, the vehicle has a nice, subtle rake. I did think of adding air bags, but it didn't make sense for my application. Thanks for showing us this, Paul! Say, are you going to install a lift kit on that "little yellow car?"

Thats what I notice about the 5th gen. The lacking of compartments. Like the one pruor gens. This is a good addition

Nice mod. Thanks for the R & D. I just ordered one!

Looks good! Order placed.

Toyo 12 Just installed mine -2022 ORP - looks great. Hides owners manual, spare lug nut key and cargo net. Thanks guys! Keep up the good work.

Just got mine. AWESOME!!!

wow👀👀 this blew my mind😆😆😆

I bought it and looks great!

I like the cover, quality is good, and I finally got it installed. Since no written directions were included and no invoice. I had to research KZfaq to find the installation instructions. The invoice should include how to locate this KZfaq instruction. Besides all that, good product.

Excellent!!!

Great idea and design. Kudos. Gotta have. Me...well I plan on installing in 30 seconds...gorilla tape those panels in place.

I ended up using a flexible extension bit to get my drill up into the tight area to drill the screws in and that made it take about 30 seconds. VS the way the inventor is doing in the video.

Brilliant!

Great mod and video! Want to order but it's sold out! :( ....and he's got a nice 2022 4R!!

Nice order placed, currently have jumper cables in a trash bag there

It was awesome meeting you guys today. Thank you for the patch. ? Where should I go for service on the 18 4Runner? I took my 08 FJ to Towne for years but ended on a bad note. I’ve had a Lexus for the past few years, waiting for the perfect 4Runner. So I haven’t had to pay for any service in awhile. Thanks again. -Meghan

Just purchased one after watch this

A flush mounted latch would be nice as well.

I just saw this . Pretty cool idea. Looks to be well made and a perfect fit . Maybe I missed it but how do yiu order one ?

I took my side pocket out and have a custom 10 inch sub woofer box inside, and both my shift knobs for transmission and transfer case r custom wood handles made by a guy on Etsy

will these work with Molle panels, looks like the latch may be hard to access behind the panels.

Im late to the 4 runner game. bought a 23 off road and cant find a good spot for my noco battery jumper and a few other small tools. This should be perfect. cant wait!

I just ordered This.

I really like this and see they are sold out. I agree it should come the factory!

Use note: love my covers, but after a while one of the tabs separated from the large one. I recommend drilling a small hole 8/32" is the size I did, and install a screw and nut as secondary attachment for the tabs.

I have a 16 SR5 and I don’t have that compartment space. Is that a TRD thing?

Can you share the part number for the running boards? Thanks,

You need to put these back up for 2024!

What's the details on the shift boot cover and clip?

Aaaand.. sold out. :( Very cool mod! I have added it to my favorites list on Etsy. I can understand why it would be sold out but hopefully it's back in stock soon! I would also LOVE to know what all is required to add that Tacoma TRD Pro gear shift knob to my 2021 4R Venture!! Like, will it be a direct remove and replace swap or is that boot required?

Nice mods.

Done modding my 4Runner🤣🤣🤣 So adorable George Lucas once said his film where never finished only abandoned. Like a 4Runner owner

I want to add a spray tank full of skunk spray to get the tailgaters off. Nice little area to hide the tank.

Digging itttttt

Mine just came in it’s awesome worth it! 1:18

Got a link to the shifter boot clip you got off etsy? Also what year Honda was the boot from out of curiosity? My shifter is really worn and I was already looking to change. That set up looks really nice!

Hey Viking, really enjoy your videos. One question, could you provide me the link to those grab handles that attached to the driver/passenger head rests for the rear occupants to use. I could really use a set. Thanks

Try these for mounting your product! Mardatt well nuts. look em up

Enjoying your videos. 4Runner Skol 🍺 Where is link to 4Runner side step ? You’ve got to turn on English Closed Caption. Sound quality is…bad . Thanks

I must say that after the first viewing of the Cargo Storage Cover I couldn't stop thinking about how cool/necessary this mod would be at some point. Should have been a factory option. A day later, viewed the video again and I've now ordered one. Hope it's here soon enough to install before I take my next cross country trip in October.

How did your friend able to fit the tacoma trd pro shift knob on the 4runner?

Great product easy install just watch video. You won’t be disappointed Buy One.

Next payday I am ordering one.

Where can we get the storage covers? And that canvas seat back? The back of my seats are forever covered in dog hair

I bought one and it's really cool, but it doesnt sit flush on the right side. Keeps the stuff in but was hoping for a better fit.

Don't forget to make the Gadsden Flag, Thin Blue Line, and American Flag embossed design versions.

3rd gen 4Runner has the cover just like that. Not sure why they removed it for the 5th gen. Does the 4th gen 4Runner have the cover?

Ordered one! Looking forward to securing my gummy bears.

Great idea but the price is high for that abs plastic. This isnt a necessity for that price but good job on cashing out on am easy idea

Not sure why, but can’t find the link? Could you repost it? Thanks!!!

Nice. But does it rattle?

Do you have a link for where I can find these? Thanks

Now you can put a jump box, socket set, tow rope& shackles, flashlight,ECT....

This is such a great mod - can't wait to purchase one! Just a quick note - love the channel, but sometimes the filming is so wobbly and moves so fast - I literally get motion sickness. I would watch all your videos but often can't make it through them because my stomach can't handle it 😂🤢.

where did you get that shift knob?

Does Matt have year part #’s for the civic boot and retainer from Etsy?

Would love to get one but they are already sold out

Amazon for the 90⁰ USB cigarette charger?

I couldn't believe my 5th Gen didn't come with a cover when my 4th Gen did.

Man they are already sold out! I missed the video the day of release and they sold out quick!

10secs in went and bought the cover.

More info on the Tacoma shifter mod. Parts, etc…

Throw a nice trd logo on it and you can take my money

👍

Parts list on how to retrofit the Tacoma shifter??