This Part Could Literally Save Your BMW Engine!

Рет қаралды 166,179

3 жыл бұрын

In this video I show you how to install a critical upgrade on your BMW.
I upgrade to a full oil pressure gauge on my 2008 BMW E90 335i with the N54 engine.
Upgrading to a true oil pressure sensor on your BMW could save you a lot of money if it potentially saves your motor.
I install an AEM 100 PSI oil pressure sensor in this video.
If you want to mimic my setup you would need the following parts:
Aftermarket oil cooler (affiliate):
ebay.us/O6BbPS
OEM O-Rings for oil cooler (affiliate):
bit.ly/39fUe77
P3 Gauge (affiliate):
bit.ly/396mXg6
The adapter for the oil pressure sensor (affiliate):
amzn.to/3qt3rR3
The pressure sensor kit (affiliate):
amzn.to/3tUGnfS
If you have a factory oil cooler you can get the following adapter instead (not an affiliate):
vargasturbo.com/product/vtt-b...
If you want to install an aftermarket gauge you can use the following gauge pod (affiliate):
bit.ly/3aeUEMH
Here is a 45 mm oil pressure gauge that could work in that vent pod and with that sensor (affiliate):
amzn.to/3aVodC6
If this is the first video you are catching of mine please consider subscribing. I upload regularly.
Thanks for watching :)
When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!

Пікірлер: 208

@Gendo3s2k 3 жыл бұрын

Next video: "installing a dipstick that should have come on the engine from the factory."

@Mrbfgray 3 жыл бұрын

No kidding. Biggest gripe I have with my N65, I was sort of expecting them to remedy that error but I guess they haven't.

@jamsbong 3 жыл бұрын

I totally would love to see you retrofit an oil dipstick. I have an Audi and a BMW. Neither of them came with a dipstick. But in the case of the Audi, the 2L Turbo already have a tube where the dipstick is suppose to be. They simply did not include it, so I just bought one from Amazon and thats my DIY done. For my BMW N52 though, there is no tube at all. So I don't know to put a dipstick there.

@spongebob7296 3 жыл бұрын

Use the electronic oil level

@slowgan325 3 жыл бұрын

This would be so helpful

@BioDreamCloud 3 жыл бұрын

Theres dipsticks for like 100$ but only for 335xi

@rreffell 3 жыл бұрын

Most comprehensive N54 videos on youtube. Solid.

@azdannyboi 3 жыл бұрын

Hands down best overall 335i content! So informative 🙌🏼

@adrianleblanc3389 3 жыл бұрын

Just got my 335i running again, can’t wait to follow your guides while I build it up! Thanks for all the amazing bmw videos in general! Seriously incredible work and quality in all your videos! 👍🏽

@rodrigomeca 3 жыл бұрын

This is awesome for monitoring coldstarts in winter, here in Quebec can get -35 fahr. Thank s for the tip

@alexnesta4070 3 жыл бұрын

Woo! was literally about to do this myself, but you found a great install kit!

@petercan1020 3 жыл бұрын

You killing it lately I should say always not lately you're really putting out great advice and explanation for everybody

@NemanjaGuitar 3 жыл бұрын

Your content and delivery keep getting better and better. Great stuff, and thanks for all the useful advice.

@KoukiOwNs 3 жыл бұрын

underrated channel, always come here for n54 help

@dfqnexxus3710 3 жыл бұрын

It's an awesome content I just don't think half of the viewers here would do something like this , but anyways you do awesome and unic things on this platform

@soside619 3 жыл бұрын

Good stuff buddy! Hope all is well after the freezing weather.

@infidel900rr 3 жыл бұрын

Solid content. N55 owner here, wish I had a dipstick, I miss seeing and smelling the oil of my cars - can give very helpful diagnostic information.

@thunderthumbz3293 2 жыл бұрын

You can still smell the oil. Its just burning from all the leaky gaskets😅.

@TheFrenchPug 3 жыл бұрын

You're a beast. Thanks again for sharing your passion and details of knowledge with us. I think BMW should give you some kind of a job.

@OzzyTheFerret129 3 жыл бұрын

Absolutely a must for this motor good info

@maciejf2032 3 жыл бұрын

Great video as always! Thanks for your effort!

@tighematthew 3 жыл бұрын

Awesome cheers been waiting for this

@Megurin88 3 жыл бұрын

Thanks to this video, this got me install a oil pressure gauge too! It would be great if u could make a sample of different reading of oil pressure depending with oil temperature on a different scenario.. this way we all know were that baseline of whats normal are.

@teemccallum7543 3 жыл бұрын

All the knowledgeable specialist live far away! Cant find one good one in my area. I know more than them by watching these videos!

@e.t.2351 3 жыл бұрын

Great content! You should try installing the virtual cockpit for bmw e9x

@Unpeoplee 3 жыл бұрын

Only channel where you may think it's a clickbait but the headline is actually true. 🤔

@nicholasstrohm6628 3 жыл бұрын

That’s funny asf😂

@RickJefferson 3 жыл бұрын

Hah so true. “This one trick could ______”

@ericarm9623 3 жыл бұрын

No cap

@nathanross963 3 жыл бұрын

Thanks for the awesome videos

@Swelgje81 3 жыл бұрын

Thnx for the video !

@mohaiminahmed2075 Жыл бұрын

I wish i could articulate like this, well discribed

@ANDYW031084 Жыл бұрын

I'm planing to do the same thing ! Waiting for the parts digital oil display with the sender unit and a 3 way adapter because I want to still Keep the OE sensor too

@jamesogara2219 3 жыл бұрын

Awesome video

@scarface16134 3 жыл бұрын

I would recommend just cross check your calibration on the sensor, when I work on N54 and check oil pressure I take out the oil pressure switch sensor and use my OTC oil and transmission pressure tester, I had to buy an addition fitting a m12x1.5. I just recommend it to ensure your reading is true. Typically i see about 90 PSI on cold starts

@VehicularDIY 3 жыл бұрын

Thanks, with 5w40 on a stone cold engine I got 98 psi and it quickly dropped to high 80s.

@philarscott6677 3 жыл бұрын

Love the content. I remember you got a new camera recently. Could you refresh my memory on which one? Thanks

@VehicularDIY 3 жыл бұрын

Thanks, it's an A7S III with a Sigma Art 24mm f.14 lense.

@krisgriffin9090 3 жыл бұрын

THE place for quality 335i content 👌

@seankaine2411 3 жыл бұрын

After getting a E46 M3 and begin around Honda's and Acuras I appreciate Honda's and Acuras just because there so much easier to work on.. K-Series engine in a Eg or Ek chassis 👋👋🙌

@umaruzdanov3433 3 жыл бұрын

Genius!!!

@grampzquad 3 жыл бұрын

Great mod! Thanks eh!

@izack367 3 жыл бұрын

my dude here sounds like freaking Optimus Prime

@thelightning87 3 жыл бұрын

Please be aware that the placement of the sensor in this location only gives proper reading if you have removed/reversed the oil thermostat or placed a "low temp thermostat" from BMS or FTP (note, both of these are not true temperature depended thermostats. They allow static flow all the time) If you have a stock setup or a upgrade like Mosselman then the thermostat most likely influences the pressure reading.

@riceball4u172 Жыл бұрын

Nice, where did you get the part joining the oil filter housing to the oil coolant? I don't see it in your parts list.

@rotorblade9508 3 жыл бұрын

I’ve used a tpms and installed a coolant pressure sensor since I had a cracked tank, but yours is also a good idea. Tpms is ok but it needs recharge when when cloudy days, then the sensor battery needs replacement after a while plus they aren’t very reliable. It read temperature as well so you would get oil pressure and temperature at the same time. But you need to build your own adapter with a tire valve threat. PS there are 1/8” to male valve stem threat available online everywhere That sensor can also be used with an arduino. Just map it and use a display

@THINPigeon 3 жыл бұрын

IIRC, the factory sensor is set at 8psi. Meaning the dummy light will come on (switch open) @ 8psi.

@VehicularDIY 3 жыл бұрын

Thanks for the info, so if you're at 15 psi at WOT it wouldn't trigger which seems crazy to me.

@xrpadoption3293 3 жыл бұрын

Just replaced BMW oil pressure sensor with genuine BMW part. Works perfect. Its just im always wary of non-bmw parts not engineered for the car.

@VehicularDIY 3 жыл бұрын

Yeah better to stick with oem on something like that.

@namsu2403 3 жыл бұрын

Nice !

@DrewJZ 3 жыл бұрын

Can you elaborate on your engine failure with the rod bearing "upgrade"? Were you trying to get more clearance for more power? Or were you chasing another issue?

@frederiklefevre4723 3 жыл бұрын

Very helpful video, now l just need to find someone local to fit it for me ! 🙂

@snivesz32 3 жыл бұрын

Question: The 2011 E82 and the 2011-2016 Z4 sDrive35is also have N54s and MSD80/81 DMEs and also HAVE oil pressure sensors. I've seen them being monitored by MHD, there are threads in the forums showing measured oil pressure. This means the car must be capable of measuring oil pressure instead of just an oil pressure switch if we can change the coding for it. How can I add an oil pressure sensor to my 335 to get that same functionality? Seems like a cool topic you could make a video about.

@eddiemunster4094 3 жыл бұрын

Reminder it's always important to check the oil level every couple of weeks only if it does not leak or consume oil! If it leaks the daily-!

@nuhnuh61 3 жыл бұрын

I was just thinking about adding one today lol. Last night it was super cold and i cold started my car. Only let it warm up for like 1 minute and a couple miles down the road i got a 2a99 code for my vanos. I'm thinking a mixture of the cold and a sensor with 170k miles on it caused it to stick. After restarting it the light went away. Hopefully its not the cam ledges

@TECH2EIGHT 2 жыл бұрын

Genius.

@shawzymusic 3 жыл бұрын

This isn't PKing.. good video anyways. Thanks Framed! I'll put this on my n54 asap.

@MarioDallaRiva 3 жыл бұрын

Very slick! As usual, nicely executed. ?: That rubber tube/nipple thingy in the engine firewall area when you inserted the wiring....is that stock? Would I see that on my 1er? Thanks.

@VehicularDIY 3 жыл бұрын

Thanks, yea it's stock and your car should have it too.

@mxrclxst 2 жыл бұрын

how come you're not using the URO oil filter cap you recommended in a previous video

@TheRobert6622 Жыл бұрын

Hi boss quick question??r you have the m cluster of the 335 for sale??you changed for the digital

@seancalverley1418 3 жыл бұрын

great video, as usual. Im down to buy the upgraded oil cooler but dont know if i wanna get the p3... is there another options to read the sensor??

@VehicularDIY 3 жыл бұрын

Yeah thanks, check the description I linked a couple other ways to go about it.

@busterscrugs 3 жыл бұрын

I wish all cars came with a real oil pressure gauge from the factory like Miata's do. Almost none do these days, usually just a dummy gauge or dummy light, and the same type of stock 1 pin switch you showed.

@tickandslug 3 жыл бұрын

Only the na6 miatas have a real guage. If you take the oil pressure sensor from a na6 and install it on a na8, then it will have a real one too.

@busterscrugs 3 жыл бұрын

@@tickandslug Oh for real? I've only driven 1.6's haha

@georgef7631 Жыл бұрын

wouldn't installing the sensor on the oil cooler line only give you a pressure reading when the thermostat opens?

@pugs1377 3 жыл бұрын

That guage can do a lot more that I thought. Have you considered checking the pressure with a mechanical guage to make sure it's close?

@VehicularDIY 3 жыл бұрын

Not a bad idea thanks.

@spongebob7296 3 жыл бұрын

Can you do a video on what went wrong with your connecting rod crank shaft bearings.

@VehicularDIY 3 жыл бұрын

I plan on double checking rod clearances and reporting back. That would be in the build video. I need to determine what type of bearings came with my engine from the factory and get an idea if the clearance was too tight with the king bearings.

@matthias_372 3 жыл бұрын

Great job, thanks. Do you, by any chance, know if the B58 needs an external sensor as well?

@VehicularDIY 3 жыл бұрын

Thanks, I believe the B58 is setup the same way as the N54.

@thescentman3678 3 жыл бұрын

I believe that I heard that bmw announced that they will change the oil pressure sensor in all 3 s from 2007 after but I m not sure

@stevesas632 3 жыл бұрын

Hi, can I ask you a simple off subject question? Just renewed my serpentine belt, along with tensioner & two pulleys. I noticed I get some lateral movement from the belt over the tensioner. I could definitely a wobble from the top pulley of the tensioner. Got a replacement, & getting the same thing, this time the lower pulley on the tensioner seems to have more wiggle to it. Is it acceptable for the tensioner pulleys to wiggle like this? Could I really have had two that are not good? Could the belt itself cause this? Both tensioners are INA & belt is Meyle. The belt seems to run true over over pulleys, but moves when it runs over tensioner. Thank you

@nv6672 3 жыл бұрын

Can you hook up the aem sensor to any aftermarket gauge ?

@twinturbo8304 3 жыл бұрын

Scotty told me when you don't smell the oil burning on the down pipes that means your oil level is low

@fredfrederickson 2 жыл бұрын

What wire should I use to install this? I don’t know much about electronics and the kit doesn’t come with any wire

@Jotomoz 2 жыл бұрын

any idea about when n54 is warmed up get 2a82 code? only happens when on a slight incline. cam ledges upgraded with new teflon hook rings and timing chain replaced. i get a feeling it's the inlet gear/phaser

@Al-lb2cq 3 жыл бұрын

sweet!

@garyvanremortel5218 3 жыл бұрын

Always use Loctite PST pipe sealant on pipe threads, especially aluminum fittings.

@Daniel22777 2 жыл бұрын

Do they have this kit for a E 92 328i

@chrysler300m4 3 жыл бұрын

that engine must produce alot power with those filters sucking up all that hot air.

@igotaction 3 жыл бұрын

Is it possible to do a Bluetooth version like ethanol sensor? It's just 12v, ground, 5v reference correct? Awesome add on!!!

@VehicularDIY 3 жыл бұрын

I don't see why not, not a bad idea to ease the install.

@Alex-ti3uf 3 жыл бұрын

Just wandering if use a analog display instead digital?

@charlieprince2671 3 жыл бұрын

I need to bring my 335 to you💯

@bill9880 3 жыл бұрын

Running a hose away from the engine and remotely mounting the sender instead of mounting it directly onto the fitting is the better route to take. Because the sender is mounted so close to the engine, the vibrations from the engine could lead to early failure.

@VehicularDIY 3 жыл бұрын

The sensor adapter kit linked below mounts it remotely. The oil cooler flange actually is designed to not transfer vibrations to the lines as well.

@bill9880 3 жыл бұрын

@@VehicularDIY I did not know that about the flange thanks for clarifying

@iTzMikester 3 жыл бұрын

What do you do if the wiring breaks off the sensor???

@kompressor135 3 жыл бұрын

Hello, do you think it would have worked if you swapped the OEM sensor with the AEM sensor and used a tap connector between the OEM cable from the OEM sensor and the ground cable from the AEM sensor? In other words, the AEM sensor would sit in the stock location with an M12x1.5 make to 1/8 NPT female and the OEM sensor would be gone but the cable from the wire would still sense ground from the AEM sensor.

@thelightning87 3 жыл бұрын

How will you feed a proper signal to the DME for the stock pressure sensor tables? Are you sure there is room for the lengthy adapter+sensor? Probably need to run a hose to place the sensor somewhere else.

@dariuszkoryzna8433 3 жыл бұрын

Would that work for S63 engine as well?

@spongebob7296 3 жыл бұрын

How does the wrong tolerance on rod bearings effect the oil pressure?

@VehicularDIY 3 жыл бұрын

The way I understand it, too loose would lead to lower oil pressure and too tight would elevate the oil pressure beyond what's normal.

@abelucious 3 жыл бұрын

Hey how's the newly installed engine performing ? have you done any pulls ? is it performing exactly like the one you had prior ?

@VehicularDIY 3 жыл бұрын

Hey yeah its performing well. Feels pretty much exactly the same. I'll post some numbers on it soon.

@Jim007baker Жыл бұрын

does this work for the n 20 engine?

@shaazy 3 жыл бұрын

Awesome video. Wanted to run this by you. I took a very daring road trip with my '07 n54, first 700kms went buttery smooth. I was so relieved. On the way back, the engine coughed a couple of times and would seem to lose power and vibrate, but no check engine light. Now, after a few days, every time I drive, it cuts out after 2300 rpm to 3000 rpm and starts running rough and has no power, like it's lost a few cylinders or something. Funnily enough, upon turning off and on the engine, it becomes smooth again. However, problem recurs at 2300 rpm to 3000 rpm again. What do you reckon it could be?

@VehicularDIY 3 жыл бұрын

I'd imagine you'd have a code stored, even a pending code. Do you have a way of scanning the DME?

@shaazy 3 жыл бұрын

@@VehicularDIY My mechanic did scan. I got two present codes, 2AAF Fuel Pump plausibility, 2F4A Interface EWS (Immobiliszer)-DME and in history, I got the following: 2EF7 Map thermostat activation, 29DC Cylinder injection Cutout, 2DEC Power management battery, 3Dff turbocharger boost pressure too low, 29DO Combustion misfires, cylinder 4

@archangelz558 3 жыл бұрын

is this useful for N55?

@ChrisChaos209 3 жыл бұрын

Is it weird that I want to be ur neighbor?? Lol I feel like we'd spend a lot of time in each others garages 🤘😎

@VehicularDIY 3 жыл бұрын

Lol best way to pass time.

@mygod87 3 жыл бұрын

Me parece un video increible

@machtschnell7452 3 жыл бұрын

Why can this not be coded into the DME for displaying oil pressure digitally? Is connecting the sensor output to the DME the problem?

@VehicularDIY 3 жыл бұрын

I'd guess there would have to be a table in the DME to interpret the data.

@N54SZN 3 жыл бұрын

Two questions 1. Can you still have access too your OB2 with the P3 2. I don’t have the P3 gauge but I am running Jb4 MHD BEF any way I can run a oil pressure sensor into the JB4 piggy back Thanks in advance

@VehicularDIY 3 жыл бұрын

Yes you can, my OBD port was busted so its just tucked away but it can remain in its original position within the P3 gauge. As far as I know thr JB4 doesn't support an oil pressure input.

@asiaexpat62 3 жыл бұрын

When the timing chain breaks (and it will sooner or later) this nice sensor will not help.

@SiMotorsports 3 жыл бұрын

You think it's bad design from factory....well on modern bmw s1000r there is no pressure sensor at all, and it's known to have oil pump issues!

@manamejeff7535 3 жыл бұрын

hey i've ben thinking and was wondering if you might have incorrectly installed a rod cap during the video. Maybe because of being distracted with the camera. Since the Rods are cracked that could have been the cause. what do you think? oh and how is the oil cooler. how much cooler on average is the oil?

@VehicularDIY 3 жыл бұрын

That would have been pretty obvious as it's an exact fit and they are fractured in a random way.

@manamejeff7535 3 жыл бұрын

@@VehicularDIY oh ok, was just a thought. just a heads up you can also use oem oil pressure sensor from newer models and screw them into the top hole of the thermostat housing and connect them to a data display

@DJ-pz4ur Жыл бұрын

@@manamejeff7535 That’s interesting. Do you know which model sensors can be used? Also I’m assuming that OEM sensor can be used with an aftermarket data display?

@Aratixwrx 3 жыл бұрын

You could not have had better timing! I was literally just looking into an oil pressure Guage. P.S. The oil pressure switch is 7psi.

@johnungvarsky8875 3 жыл бұрын

So you are saying that the stock oil pressure sensor located in the oil filter housing triggers the idiot dash light when pressure gets below 7 psi? Where did you obtain that number?

@javarithms 3 жыл бұрын

@@johnungvarsky8875 yes, that's exactly how it works according to BMW TIS manual.

@zux37 3 жыл бұрын

you may pull your light switch back out - its in accident mode by your knee probably :D

@freddyflinstone127 3 жыл бұрын

naaa leave it in its a good crum catcher

@georgerobartes2008 3 жыл бұрын

No nothing can save a BMW engine , just one of the German car companies that are being sued for faking emissions . Top tip for saving any engine which I use on race cars is a Harley Davidson hydraulic brake switch in the gallery made by Accel etc. Just cut any ignition wire and connect it across the terminals on the brake switch . The car will then not start until oil pressure shuts the brake switch and cut the engine instantly should you lose oil pressure . I think the last one from the US was about £15 ( $19) !

@wernerdanler2742 3 жыл бұрын

Just about all European cars had oil pressure gauges at one time. I just don't understand why they stopped. Now they are even doing away with the dipstick for both the oil and transmission.

@RsOnTheStreetS 3 жыл бұрын

This is because of the car owners, they want a warning lamp, not a gauge where they must think about.

@wernerdanler2742 3 жыл бұрын

@@RsOnTheStreetS Of course the mindless people driving around don't know that when that oil light comes on, you got no oil pressure and very soon no engine. And the Alt light comes on when it is not charging so very soon no battery.

@RsOnTheStreetS 3 жыл бұрын

@@wernerdanler2742 there are 2 signals for oil pressure. A red light for low pressure and an acoustic signal for no oil pressure. But I'm not sure if it in modern cars too.

@wernerdanler2742 3 жыл бұрын

@@RsOnTheStreetS I don't know about the acoustic signal. If you turn the ignition on all your lights come on but I have never heard a signal. I should think if there was one on any car I've had it would sound then. 🤔 My 01 Mercedes-Benz does not have a gauge. Any cars I've had older than that had them. Bummer!

@tonymontana897 3 жыл бұрын

Hi and thanks for the video. I find it absurdly unthinkable that BMW has rod bearings as a service item. That is absolutely pathetic. I seriously don't know why anyone would purchase a ticking time bomb like these. The certainly don't make them like they used to. Sheesh ! The Germans are supposed to be the best engineers in the world and how they cocked this up is unimaginable.

@shortz9604 3 жыл бұрын

Would alll N54 use those values? -13-113?

@VehicularDIY 3 жыл бұрын

If you're using a 100 psi sensor.

@emmanuelenriquez4872 3 жыл бұрын

You run 5w30? I keep hearing different numbers. I live in California inland empire and run 0w40 mobil 1 "euro" and I feel like its too thin. Recomendation?

@VehicularDIY 3 жыл бұрын

I run 5w40 actually.

@derekkchung Жыл бұрын

On N55 engine, there is an oil pressure sensor monitoring the oil (reading range: 0.5 to 10.5 bar) and adjust the duty cycle of the oil pressure solenoid so as to provide a specific pressure for the vanos gears, and also ease the load on the oil pump (better fuel economy) when not that much pressure is needed, am I right? If N54 engine has only oil pressure switch, then it has no control of pressure to the vanos. Then it really could not PRECISELY control and monitor the vanos gears? Maybe it would allow a wider range of limit before DME concludes something wrong (advance and retard) of the vanos?

@JbsiN-ec3xk 3 жыл бұрын

Why does my oil filter crimp... What can be done to reduce or remove this recurrence thanks

@VehicularDIY 3 жыл бұрын

What brand are you using?

@jcfinch4389 3 жыл бұрын

Ok motor failed from bearing clearances? did you not plastygauge the rod cap and check after?

@VehicularDIY 3 жыл бұрын

I did but given these engines come with three different rod bearing types from the factory I ended up with clearance that is too tight I believe. I have my original bearings so I'm thinking to double check the rod the crank clearance with the crankshaft out of the car.

@geoff3320 3 жыл бұрын

@@VehicularDIY I think the bearing clearance codes are laser etched on the crank shaft, something like rrrbrr, each letter is a reference to the journal size and which colour coded bearings to use.

@ZHPBrent 3 жыл бұрын

👍

@adasterdezaster2865 Жыл бұрын

Anything below 7 PSI trips the light

@DwFab 3 жыл бұрын

Hey man I have a N54 and I’ve been chasing this issue for a while . I’ve been having an issue where after getting on my car and coming to idle my rail pressure sky rockets to 2500 psi and starts ticking really loud . As soon as I tap the gas the tick goes away and the rail pressure drops to 750 and it will happen almost immediately after . I’ve changed the hpfp to a used one (all I could afford at the time) but I don’t think that’s the issue . Do you have any ideas on this ?

@VehicularDIY 3 жыл бұрын

Sounds like maybe the volume control valve not working properly see if you notice a change in ticking from a cold start to about 2 minutes after the car starts.

@DwFab 3 жыл бұрын

@@VehicularDIY thanks for the reply . Where is that located on the engine ?

@DwFab 3 жыл бұрын

@@VehicularDIY could you tell me where this volume control valve is located ?

@RomanTrollanski 3 жыл бұрын

Great content! But probably best way to fix it is just to get rid of the car. BMW it's not what it used to be in the '90.

@VehicularDIY 3 жыл бұрын

Well I think its safe to say the only way to keep a car like this on the road is to work ok it yourself.

@twinturbo8304 3 жыл бұрын

I'm going to consult with Scotty

@freginals2169 3 жыл бұрын

I have a 2A82 error, do you think that updating this may fix my error?? I tried changing a lot of thing and none of them fix the problem.

@VehicularDIY 3 жыл бұрын

Have you double checked that the oil filter cage is present ok the oil filter cap?

@freginals2169 3 жыл бұрын

@@VehicularDIY yes, and also I changed my two vanos solenoids but the error continues. I dont know what could be the next step for chek. Thanks for your answer!