Matching corsair fans, AIO, and rgb ram goes hard tho.
@CrumblingLeechАй бұрын
@@Frae-_- the software is really what's stopping new from fully embracing Corsair, but it's nice seeing a clean set up with them :)
@MarcsSpark Жыл бұрын
The reenactment with the tiny gpu was hilarious! Keep up the great content.
@GearSeekers Жыл бұрын
Thanks so much hahaha!!
@smilingbuddha536 Жыл бұрын
The 5000D is the best case case I've owned and looks amazing with the QL fans. The cabling is a bit bit tight at the back with 10 fans but everything at the front looks sweet. I didn't put a push/ pull fan config on my AIO either, just too much cabling for a 2oc difference. I didn't know about nanoleaf compatibility, so thanks for heads up!
@obsessive8332 Жыл бұрын
Damn, I have 9 fans in my 5000D and it takes many hours of work to keep the back tidy: 3 QL120; 3 QL140; 3 NZXT Kraken fans
@jwaye89 Жыл бұрын
Banger of a video fams and I love the little sound effects you've added when you install some of the components. Keep up the hard work
@Ignitros Жыл бұрын
I miss my Bengal cats. I enjoy seeing yours in your videos!
@Keto111 Жыл бұрын
Hello Sir 😊 I have successfully installed my MSI radiator watching your tutorial video & still learning from you alot, god bless 🙏
@GearSeekers Жыл бұрын
Thanks for sticking around!
@Phalaxis83 Жыл бұрын
Excellent video fams. Loving the new filming setup. Keep up the awesome work.
@jeremyhouse129 Жыл бұрын
Hell, I just rebuilt both my 5000d case machines with 7000D cases and 420 aio's....no loss of fans there lol.
@Teeyo456 Жыл бұрын
You missed the opportunity to mount RGB fans on top of the power supply shroud which is an excellent option on these new RGB models. RGB is life 😂
@ertgb_ Жыл бұрын
I use SignalRGB to get similar(arguably better) RGB effects with support for my ASRock motherboard, Gigabyte GPU, and Steelseries keyboard as well. It also has nanoleaf integration. I used an H150i Elite Capellix XT instead of the H170i, so the front and side fans fit. Did have some clearance issues with the CPU cables, but I was able to route them over to the back of the case and around the radiator that way. It covers the fans, but it works.
@ashleyjaytanna1953 Жыл бұрын
Came here for the PC build content...left with the good vibes with you chilling with Bindi....10:30 🤣🤣🤣🤣
@mirkodiciano4647 Жыл бұрын
Great vid guys love the jump cuts and the story about dropping the GPU lol super funny
@GearSeekers Жыл бұрын
Mirko you are a legend!
@mirkodiciano4647 Жыл бұрын
@@GearSeekers thanks
@deimos871102 Жыл бұрын
Hahaha the doom sound samples you used when placing the cpu, roflol. How did you come up with that? 😂. Anyways great video once again. Amazing how you can add the nanoleaf functions
@GearSeekers Жыл бұрын
I love Doom lol. I thought it would be cool lol
@deimos871102 Жыл бұрын
@@GearSeekers True classic. Keep up the good work
@momenjaber581 Жыл бұрын
I got a 5000d with 12 120mm fans with the h150i lcd using push pull, I can say that they do in fact fit.
@iamChermac Жыл бұрын
I'm inspired by the jank! Now excuse me as I go see if my Arctic LFII 420mm 'fits' in the top of my Phanteks 719.
@KlaireGearSeekers Жыл бұрын
Jank is gooooood! 😅😅
@liv4combat Жыл бұрын
Way late to this video, but wow. Especially like how you mixed in some classic Doom sound effects into your music. Shotguns, doors opening, etc. Takes me back..... way back!
@rodhester2166 Жыл бұрын
Thanks for the video. .Always great to see my favorite cat.. cheers
@Mooria18 күн бұрын
u can put x2, 200mm fans in the front with a mount
@mts982 Жыл бұрын
wow 208k subs now. i remember when you hit 100k. nice job.
@GearSeekers Жыл бұрын
Lets Go!!
@earthtaurus5515 Жыл бұрын
@2:48 Master Hand Cameo?! 🤯🤯😱😱.
@babylorvbeats Жыл бұрын
Those rgb rams are the best rams ever. It looks so good.
@ALxdCr4ftPlays9 ай бұрын
This week I'm looking to buy a new custom desktop PC. I live in NZ. Corsair 5000D airflow white, Intel Core i7-14700K, iCue LCD 360mm liquid CPU cooler, MSI Ventus RTX 4080, MSI Tamahawk DDR5 motherboard, Corsair 1000W, 2TB Samsung 990 Pro M.2 SSD, 64GB DDR5 Corsair Platinum (4x16GB modules). We have some companies in NZ where they'll build and test all for you. Quote for my system is NZ$6,200 (incl. GST & overnight courier). Big upgrade from my 2016 system (GTX 1070, i7-6700k, 16GB DDR4, 1TB Samsung SATA SSD).
@shawner7340 Жыл бұрын
Also just had one of those noobie days. Built 2 PCs and both had a serious issue. One motherboard had 2 dimm slots, and the other would shut down due to over current protection, still need to troubleshoot that one.
@CarlosDeBernardMrAgapi Жыл бұрын
nice. i put a 40mm rad on the side and 30mm on the top. The 5000d after many many many years, is the one that i stick. with a small revision can be the best out there. 4 things can change to be the best out there.
@GearSeekers Жыл бұрын
Yeah I did something similar a while back!
@CarlosDeBernardMrAgapi Жыл бұрын
@@GearSeekers nice. Still work on those and apply the 1usd L shape brackets to out rads on top. That will give room for eps cables. Nice video the 5000t is a good case also but to much corsair cables. But that will change soon as i have digg a litlle
@sunraiii Жыл бұрын
Ah yes, Gear Seekers Rule Nr. 1: *If it fits in there,* *and you can screw it down,* *and if fits without a Dremel,* *it fits.*
@HikingWithJay Жыл бұрын
You can still fit the fans in the front, just remove the filter in the front and mount the fans the other side
@honinakecheta60111 ай бұрын
Regis case is still awesome. Great design with amazing airflow, I use mine with ten Lian li sl infinity fans
@mvpittman Жыл бұрын
these sound effects, bro.
@Jenks1 Жыл бұрын
The Corsair 5000D remix!
@fist003 Жыл бұрын
with that title and intro, i thought you put the nanoleaf lines in the case
@zsoltlaszlo6666 Жыл бұрын
Best case ever !
@aryannarose10 ай бұрын
I couldn't even get my Arctic Liquid Freezer II 360 A-rgb rev 4 to fit up top of my Corsair 5000D Airflow so the case went back to Best Buy for a refund.
@niekgozer26 Жыл бұрын
Isn’t there a version but with a glass front panel? That would look way more finished then the mesh without fans i think!
@teachhimself Жыл бұрын
thermals my friend
@odhinn9 Жыл бұрын
@@teachhimself Would it really effect the thermals that much with intaking on the side? The o11 D cases are all like that.
@teachhimself Жыл бұрын
@@odhinn9 oh right i forgot it had those :p
@niekgozer26 Жыл бұрын
@@teachhimself doesn’t even have fans in the front. Difference would be negligible, it might even help the airflow since not as much air will bleed from a place you wouldn’t want it to bleed from.
@t3rminallychi11 Жыл бұрын
@Gear Seekers you actually can install 3x120mm fans in the front, just have to mount them on the front of the fan mounting bracket (or the “outside” if you will). Might need to remove the mesh filter but they will fit.
@3LbR Жыл бұрын
Quitar el filtro no me parece buena idea.
@massam9343 Жыл бұрын
The 5000D can also fit 3x 140mm front and 3x 140mm top, BUT u need to use the lian li fans 140mm and install ur AIO on the side. my 5000D setup is like that. Incredibly enough, it does help lowering the temps!! by 5%-8%!!! I love how versatile this case is!!
@@KlaireGearSeekers Thank you for the Hi, it means so much to me. Say hello to Nick.
@KlaireGearSeekers Жыл бұрын
@@gpredd1 Aw! I always love popping in to say hello! Thank you for thinking of me! 💜💜💜💜
@weroliera Жыл бұрын
If it fits? It ships.
@cityofeverything2 ай бұрын
in the 5000d airflow rgb? have u ever experienced the front being weird and lose? (the not easy removeable part). if u look from the front of the case its the left site/top corner of the case... just bought pc parts and that case and i checked it and first some plastic broke off (think it is normal) but then the front was yeah weird?
@Kelekona_808 Жыл бұрын
First Nick got Sniped, and now he's the victim of a 4090 Air Strike... Nick musta been griefing too hard.
@KlaireGearSeekers Жыл бұрын
😅😅😅😅
@Neslekkim6 ай бұрын
aha.. I'm building in this case right now, and when trying to mount the radioator, I found it does not fit, i have an Arctic LF 360 II RGB, but I see I can screw the radiator at one side, but not the side going to the mainboard. Seems like you did the same? only the outer screws, not the ones going to the back ?
@Marks7777711 ай бұрын
Will it fit to my NZXT H7 elite as it’s fit x3 140mm fans at the front , I remember you put 280mm radiator to H210
@rcortez5979 Жыл бұрын
Talking about corsair, sir do you think that doing a push/pull configuration of the 420mm arctic liquid freezer on the top of the 7000D doable? Ive been dreaming a nonrgb build of mine on the future. I hope its gonna fit with no problems at all hihihihi. Would appreciate a reply! 🤟🤟
@eliassamra2169 Жыл бұрын
could you please test fit asrock x679e taichi with fractal north case ?
@wenicu3 Жыл бұрын
oh corsair 'signalrgb'
@Arhan2811 ай бұрын
how did you get those cpu power cables to fit with that AIO? I was so afraid i was going break my motherboard forcing it in. Same type build
@Krels6 ай бұрын
Is it supposed to be 7 exhaust 0 intake and no front fans or is that just for the aesthetics? if it's supposed to be like that can u tell me why please
@GearSeekers6 ай бұрын
There are 3 intake fans
@user-bz2uo6wc3f Жыл бұрын
5000D or H9 flow ?
@notorioezz Жыл бұрын
Yo, could you help me. I have a Corsair 5000D RGB Airflow case. I have 3 fans in the front, 3 on top that are the 150i cooler ones, and then that one on top behind the graphics card. But that one, I can't seem to find in corsair Icue.. It stays white. It's a regular one like the case build in, just a 7th extra i bought seperatly but Icue doesn't find it.. I'm kinda lost
@ARES5205 Жыл бұрын
I have a 5000T do you think it may work as well?
@techspirit7 Жыл бұрын
with regards to the front fans after installing the 420mm AIO is it possible to install two 140mm fans? or it should be 120mm only?
@GearSeekers Жыл бұрын
Yeah you could probably do that actually
@techspirit7 Жыл бұрын
@@GearSeekers Thanks a lot for ur fast reply and the valid information That's really good then I do preferer to sacrifice one fan in the front to install a 420mm AIO Thanks a lot again bro (Ur amazing)
@obsessive8332 Жыл бұрын
You know it's not right when you need to spend 50-100 for the highest end fans
@miniblasan5717 Жыл бұрын
How come you could fit a 420mm AiO when it specifically can only fit a 280mm or a 360mm AiO in the case?
@GearSeekers Жыл бұрын
I made it fit :)
@Josh-go9km Жыл бұрын
Hey guys, did you have to move any of the stand offs to fit the aorus z790 master?
@GearSeekers Жыл бұрын
no
@DarkIdrees Жыл бұрын
damn
@RichardSanchez137 Жыл бұрын
Until they make case fans with Power and RGB on one cable please stay away from Corsair as it is a cable mgmt nightmare.
@richardfarmer6570 Жыл бұрын
What was it you said recently? Oh right, RGB software sucks.