This SOLVES Problems in the Bedroom

Рет қаралды 12,716

Күн бұрын

Patreon - / fortressfinewoodworks
Fortress Shop - unlockfortress.com
Join me as we PROBLEM SOLVE, and find a way to give this client what she wants! A built-in bedroom set can be a great way to keep things low profile, and provide ample space to showcase decor and mementos. This furniture set has a modern yet classical design with pull-out phone trays, raised panels, and a floor-to-ceiling composition. Thanks for watching, and I'll see you on the other side!
0:00 Intro
0:53 Milling the thickens
3:56 Whole project laid out (literally)
5:06 Making the raised panels
7:01 Silly Dewalt
11:31 Making the nightstands
13:11 Resawing like a King!
14:11 Drawers and pull-out trays
18:10 Overhead panel
20:47 Headboard
21:32 Headboard cap
23:41 Spraying TIPS
26:31 Install
29:52 FINAL SHOTS
Links to tools and products that I used in this video!
THANKS FOR YOUR SUPPORT!
Raised Panel Router Bit (1/2" shank - 2 1/2" Diameter) www.findbuytool.com/products/...
Dewalt Atomic Pin Nailer - amzn.to/3SW8us1
Dewalt Atomic Brad Nailer - amzn.to/3JiUENd
Blum 9" Drawer slides - www.rockler.com/blum-tandem-e...
Laguna Resaw King Blade (pick your size) - amzn.to/3Zoz9QT
Bondo All Purpose Putty - amzn.to/3ITueQI
Makita Palm Router - amzn.to/3UkXG6Z
Kreg Pocket Hole Jig (K5) - amzn.to/3HuXu10
Bench Dogs Push Block - amzn.to/3UUfJ3d
Japanese Pull Saw - amzn.to/3UXHisi
Bosch Router (for router table) - amzn.to/3VDxROU
Rockler Router Table ACCESSORY KIT - amzn.to/3VD4z2Y
SPRAYING EQUIPMENT
Graco Airless Sprayer with gun - amzn.to/3QWVPnS
Graco fine finish tip (308)- amzn.to/3WnJ3jk
Graco fine finish tip guard - amzn.to/3Xq5fuy
Sherwin Williams Wall and Wood Primer - www.sherwin-williams.com/home...
Sherwin Williams Trim Urethane Topcoat (tinted to tricorn black) - www.sherwin-williams.com/home...
MACHINES
Laguna i Flux 5 Dust Collector - lagunatools.com/industrial/du...
Laguna J 16 Jointer - lagunatools.com/industrial/jo...
Laguna p25 Planer - lagunatools.com/industrial/pl...
Festool tracksaw - amzn.to/3qNfD0B
Festool Midi Dust Extractor - amzn.to/3Lml6oE
Festool Sander 6" - amzn.to/3DDHBn4
Festool Rectangular Sander - amzn.to/3DDIkVk
Festool Kapex - amzn.to/3HsHAV2
SawStop PCS 175 (SMALLER) - amzn.to/3SfgItS
SawStop ICS 73230 (BIGGER) - amzn.to/3Ga1cLq
Sawstop crosscut table - amzn.to/3hYBrWs
Ridgid Brad Nailer - amzn.to/3UvShua

Пікірлер: 48

@SamWanamaker1 Жыл бұрын

Really cool to see a KZfaqr building things the proper way! I have a feeling your channel is going to grow immensely.

@FortressFineWoodworks Жыл бұрын

Thank you kindly! If this channel grows immensely, it will be in the hands and help of viewers like you. Thanks for watching!

@joeyr4869 Жыл бұрын

It’s crazy you were able to do this type of work out of a tiny garage before this. The new shop must be a dream!

@FortressFineWoodworks Жыл бұрын

Yeah! Well my stack of plywood was leaning against my living room wall, cabinets would be stored anywhere they could fit in the house or back porch, and when I used to spray solvents, my house would stink for days while everything cured.

@bobrobinson4557 6 ай бұрын

Very nice. Thanks for pointing out the inadequacies of hard wax oil. I learned it the hard way. Looks great but… Nice to see the science behind your processes.

@FortressFineWoodworks 6 ай бұрын

Glad it was helpful! Thanks for taking the time to watch!

@Diana-vp3zr 38 минут бұрын

That plywood storage 😍

@Benmeglei1 Жыл бұрын

Just picked up the Milwaukee cordless pin nailer. It’s about half the size of the Dewalt and so far I must say I’m impressed.

@FortressFineWoodworks Жыл бұрын

I considered that one for sure! It looks like the best bet if someone wants to get into the Milwaukee ecosystem. Thanks for watching!

@bridgetdvorak463 Жыл бұрын

Wow! There are so many pieces that go into one project! You also had a pretty cute pup assistant this time 😊

@FortressFineWoodworks Жыл бұрын

Thank you! He should be paid

@docdoctme 2 ай бұрын

New subbie- your work is phenomenal! Thanks for sharing your talent.

@FortressFineWoodworks 2 ай бұрын

Thanks for the sub! I hope to see you around in the comments section!

@gabet3754 7 күн бұрын

Beautiful job. Wow

@FortressFineWoodworks 7 күн бұрын

Thanks so much!

@CorbinMusso88 Жыл бұрын

I wish I had friends to share these videos with. 😅

@FortressFineWoodworks Жыл бұрын

Spam your enemies with them instead!

@mattelias721 Жыл бұрын

Having your new (I'm not jealous btw) shop allows you to seriously show your skill, man. That looked amazing and intimidating. I'm doing some very (very!) basic built in shelves, and you provided so many great tips. Since you asked, I'm a fan of the Makita ecosystem. The only things of theirs that have failed me are orbital sanders, and I've repaired the worn out parts myself, so now I have three of them. That said, I own a Porter Cable pin nailer and a PC brad nailer. Both are air-fired, and I've forgotten how difficult life was before. DeWalt, in my opinion, is creeping slowly toward Harbor Freight-hood. Pro tip: a brad nail in a finger bone or better - under your fingernail - is inevitable, so just carefully yank it out with pliers... turpentine helps stop the bleeding.

@FortressFineWoodworks Жыл бұрын

Thank you. I'm glad you get some good info from my videos. I agree, dewalt is slowly taking a nose dive. And OUCH. Turpentine on a Brad nail hole under the fingernail? Might as well light a match and get it over with! (Just kidding)

@yanetmartin8661 Жыл бұрын

Una maravilla , exelente trabajo .

@FortressFineWoodworks Жыл бұрын

Gracias por ver!

@yasarmevlutoglu776 Жыл бұрын

Всё на высшем уровне 👍👍👍🇹🇷🙏

@FortressFineWoodworks Жыл бұрын

Thank you for watching! 🙏

@AVSMedical1 6 ай бұрын

Amazing work, really beautiful. I’ve never used one, but the Lamello Zeta seems like it would’ve worked well instead of the pocket holes on 12’ headers.

@FortressFineWoodworks 6 ай бұрын

Thank you! Yes I agree about the lamello. I will need to invest in one of those soon

@user-gt4jg9up4l 6 ай бұрын

Классная работа😊! Какую краску использовали для покраски?

@FortressFineWoodworks 6 ай бұрын

Thank you. I used envirothane 170 primer and envirothane 200 white topcoat

@user-bv8lj9jx8n 6 ай бұрын

Great job, If I may ask what type of paint are you using for this project?

@FortressFineWoodworks 6 ай бұрын

Thank you. Envirothane 170 primer and envirothane 200 topcoat in 20 sheen. You have to get it from industrial paint supply shops

@haydenclarke8129 5 ай бұрын

What model graco airless do you use?

@FortressFineWoodworks 5 ай бұрын

Graco x7 Just a contractor model, but I use a 308 fflp tip which produces the fine finish

@infinityvideoprod Ай бұрын

@2:53 you DID NOT just try to clear that waste piece with your fingers, DID YOU? WTF were you thinking? Otherwise, beautiful project!

@FortressFineWoodworks Ай бұрын

Yeah I did. With the blade guard there, it seemed safe enough! Thanks!

@infinityvideoprod Ай бұрын

@@FortressFineWoodworksunfortunately when you promote yourself and your channel to be the "teacher" of woodworking techniques, chief among them should be best safety practices. You set the example others will follow, good or bad. Hey, we've all done it, just remember to edit those parts out! 😊