Accessorize Your Milwaukee Hard Hat- The BOLT Safety Gear You Need To Know About!

No video

Accessorize Your Milwaukee Hard Hat- The BOLT Safety Gear You Need To Know About!

Рет қаралды 26,947

markthomasbuilder

Күн бұрын

Пікірлер: 35

@MarkThomasBuilder Жыл бұрын

What accessories would add to your hard hat? Is there anything else you would like to see offered?

@Suavthoj92 6 күн бұрын

Thanks for clarifying the two mesh face shields, and actually showing us that one is wider than the other!

@MarkThomasBuilder 4 күн бұрын

You bet! I have another short video showing some updates for these helmets. Stay tuned for it next week.

@jasoningram2006 9 ай бұрын

OH A NOTE ABOUT THE MILWAUKEE USB 3.0 RED LITHIUM LIGHTS AND BATTERIES WHICH IS DO NOT TWIST THE CAP OFF AND POP YOUR BATTERY OUT OR ANOTHER BATTERY IN WHILE IT IS STILL IN THE ON POSITION IT WILL THEN CAUSE YOUR TOOL LIGHT TO BLINK AND IT WILL NEVER WORK CORRECTLY AGAIN UNTIL YOU SEND IT OFF JUST THOUGHT YOU SHOULD KNOW TRY YOUR OWN RISK

@electricalron Жыл бұрын

Awesome! Makes me want to go out and cut some branches/ prune some trees!

@MarkThomasBuilder Жыл бұрын

Haha, that's cool! I need to get out there too, once the ground dries up a little.

@masoodamg6633 Жыл бұрын

It was very interesting my friend. Thankful👏👏👏👍👍

@MarkThomasBuilder Жыл бұрын

Awesome, glad you like it!🙌

@jasoningram2006 9 ай бұрын

The reason they are swapping to that style hard hat is because most injuries on job sites believe it or not happen because when someone falls their hard hat also falls off and then they hit their head on whatever. I talked to a foreman on a site last year and was asking him about this and what was up with it and asking if I needed to go ahead and jump to the new type helmets but considering how expensive they're going to be from what I understood more or less you should be able to just get a new harness on the inside of your hard hat that would allow you to have a chin strap. Because it's more or less going to be good enough depending on the field the type of work and just you know many different little factors. But for your average construction worker probably not a big deal. I was actually unaware of that most injuries occur because of hard hats falling off before people hit the ground.

@markbroad119 Жыл бұрын

I worked for a company who went to the Milwaukee helmet. Class 2. They did not have vents and the other dislike was no full brim. I'm in Oregon, the drim all the way around here keep rain off your neck and in your jacket.

@MarkThomasBuilder Жыл бұрын

You bring up some good points that I never considered. I just checked the Milwaukee website and they now offer full brim helmets either vented or non-vented. I know that feeling of water getting in your jacket. As a builder, I definitely don't like the winter days where the melted snow is dripping off the roof when you're working near the overhang.

@markbroad119 Жыл бұрын

@@MarkThomasBuilder I bought the Wavcel T2 max hardhat. Was $200 but I liked it. The vents are designed to not let water in but heat out

@MarkThomasBuilder Жыл бұрын

@@markbroad119 That's cool, I'll have to take a look at them.

@jasoningram2006 9 ай бұрын

They also make that PPE neon green shader that goes around the entire hat as well. Kind of like a big safety 10 gallon hat. But I think the entire point of it is that Milwaukee makes it modular so you can just get what you need as you go. I will have to say I did think that originally $110 for a hard hat was ridiculous and seeing as I don't really need one even though I do tree work I have the more traditional style bolt helmet and it was just fine. Funny thing is I paid $40 for my helmet and then went to and Ollie's two and a half weeks later and saw them on the shelf for 12 bucks lol

@samonejones1687 Жыл бұрын

Love the video. Definitely thinking about getting a Milwaukee

@MarkThomasBuilder Жыл бұрын

Here's another upgrade Milwaukee is making to their safety helmets... kzfaq.info/get/bejne/iKyZesWcxLmzj4E.html

@jonathantx Жыл бұрын

Great review, been looking at one of these.

@MarkThomasBuilder Жыл бұрын

I highly recommend any of these Milwaukee accessories.

@jasoningram2006 9 ай бұрын

Also the lens visor in my opinion isn't that great. What could have made it really top notch was putting some sort of padding around the bottom portion and where your nose sits whether it be just some memory foam weather stripping or something or a gasket or something along those lines that would allow you to more comfortably have it closer to your face so you wouldn't have all that area for potential debris to get underneath and get around. And that plastic is not comfortable up against areas where there's little skin and muscle and fat such as the bridge of your nose. It does feel a little weird wearing it too but that's just me. I ended up taking mine back because I noticed it it was getting scuffed up pretty easily trying to raise it lower it when getting used to using it. I returned it and order the stainless steel screen mesh instead.

@tango165 Жыл бұрын

Good stuff, thanks for this video!!

@MarkThomasBuilder Жыл бұрын

You bet, glad to hear it!👍

@rcjunkies816 8 ай бұрын

Sheesh that must be a heavy hard hat with that 600 headlamp

@MarkThomasBuilder 8 ай бұрын

It's balanced pretty nice with the battery in the back and the light in the front.

@user-bf9dj6lh9m Ай бұрын

BOLT saftey glasses fit to other cheaper BOLT hard hat ?

@2323shaq 5 ай бұрын

The ear muffs go in the center hole, and so does that sunshade. How does that work?

@MarkThomasBuilder 5 ай бұрын

I haven't used the sunshade in awhile, but I recall the sunshade going in the back hole and the earmuffs in the center. I seem to recall the earmuffs being more comfortable when I put them in the back.