Thrashin Supply Bars + Riser On 1986 Electra Glide! // How-To

Рет қаралды 22,036

3 жыл бұрын

Hi guys! So i recently purchased a 1986 Electra Glide and wanted to do a budget bagger build. All the bagger builds that we see online always cost an arm and a leg. In this series, you'll see me build this bike, as budget-friendly as I can!
In this video, I put the Thrashin Supply Street Glide adapter on the Electra Glide, along with a riser clamp and handlebars! The process is a little time consuming, but definitely possible!
Street Glide Adapter: www.thrashinsupply.com/collec...
Handle Bars: www.thrashinsupply.com/collec...
Handle Bar Clamp: www.thrashinsupply.com/collec...
Grips: www.biltwellinc.com/collectio...
Rubber Trim: www.amazon.com/gp/product/B07...

Пікірлер: 49

@jonnymac8925 2 жыл бұрын

That bike was made the year I was born, it actually aged better than I did tho 😆

@josephtizol9695 8 ай бұрын

So glad I saw this! I just subscribed I love the paint scheme on your bike I’ve got a 93 FLHTP that I converted to a Tour Glide fairing but haven’t seen any videos of anyone doing a bar / riser set up like you did. I’ve got a Big Al’s bar and riser on my 83 FXR and it’s such a great set up

@beneastman569 Жыл бұрын

I just had one of these for sale by me and I was curious how it would be putting bars on so I’m glad I stumped across this video haha

@lemonheadgarage Жыл бұрын

haha thats exactly why I wanted to do it. I was always so curious, but not many have done it.

@samstinkeringaround8961 6 ай бұрын

That was a very helpful video , just bought some 16's to install however don't really care for the T-bar look on a bagger. ❤love it

@longboardalways Жыл бұрын

Great video. I just got a 2001 Electra glide and will be running a similar setup.

@dohctorzc Жыл бұрын

Sick bike!

@Zerotys_ADV 2 жыл бұрын

Very nice!

@leonardstango751 Жыл бұрын

Just finished this set up on my sg thanks for the inspiration

@MrMryeahbitch 6 ай бұрын

Are you able to use the fork lock still?

@ryancapelli 21 күн бұрын

great work, thanks for this. curious - why choose a riser instead of just changing bars? i’m considering both at the moment.

@micahvelli_236 2 жыл бұрын

Really informative install and easy to watch video, i wanna do a similar set up for my 2013 street glide. Trying to do a budget performance/touring build.

@lemonheadgarage 2 жыл бұрын

Hey Micah, thanks for watching! I hope it goes well!

@Snakebite666 Жыл бұрын

ANOTHER great video ...Thanks

@Drumfisher215 2 жыл бұрын

My 1988 has a plastic cover that covers the riser clamps. Did yours have that as well and if so how is that removed? It looks like your risers were exposed already.

@kennystein5006 Жыл бұрын

Would this be the same way are very similar on a 2005 Electra glide?

@lawrence6115 2 жыл бұрын

I’m looking for that riser adapter but I can only find one for 2012 and up, is that the one you bought? I have a 2002 ultra

@Jayse-Mecham 3 ай бұрын

What’re the lengths of your new throttle idle and clutch cables?

@carlosontiveros430 10 ай бұрын

I have a 1988 flhtc - that set out is sick.what rise and bars did you use?also the wire connectors Hello again I called thrashin put they directed me to just a riser with out the adapter. That is the part number on what you used .is it necessary? Could you give the brand or riser and bar you used 1 inch diameter?

@onOnewheel_jay 2 жыл бұрын

sick bro you brought that vintage bike back to life will this set up work on a 99 ultra e glide?

@lemonheadgarage 2 жыл бұрын

Hey Jason! Thanks man. It should, but the way it mounts might be different!

@onOnewheel_jay 2 жыл бұрын

@@lemonheadgarage thanks bro i ordered sum risers and pull back plate with the bars from thrashin my bikes taken apart juss waiting on parts well see how it goes hopeing i can still use my ignition

@jedgmon5718 5 ай бұрын

Who did the radio and amp in your set up

@jordanrihani508 4 ай бұрын

Is it possible to do the exact same on a 2002 ultra glide?

@jonchapman3998 2 жыл бұрын

So we’re you able to move the Ignition switch after you sanded down the plate? So no relocation of the switch right?

@lemonheadgarage 2 жыл бұрын

It fit perfectly after I sanded it! I didn’t need to relocate the switch.

@rlb1126 9 ай бұрын

What size riser did you use?

@Avankaurparmar 7 ай бұрын

Hey i just bought a bike like this what risers did u use thrashin supply too?? Or just the top clamp and adapter were thrashin??😊

@lemonheadgarage 7 ай бұрын

Hi! It was the Thrashin mid bends. I believe they were 7.5” pull backs from drag specialties. Thrashin top clamp

@bobbyolin9950 Жыл бұрын

Did you have to get extended cables, and if so where did you find them? Those look awesome by the way!!

@lemonheadgarage Жыл бұрын

I did not have to extend any cables. It barely made it haha

@chrismartin500 Жыл бұрын

what height risers are these? Are these the mid bend bars?

@lemonheadgarage Жыл бұрын

Hi, yes they are!

@1cleansinglecab Жыл бұрын

Any more videos of this bike?

@lemonheadgarage Жыл бұрын

Hi, unfortunately I dont have any more videos of this bike.

@NickAbrego 2 жыл бұрын

I wanna do this to my 89 tour glide! But my gauges are there

@lemonheadgarage 2 жыл бұрын

I haven't been able to work on one of those yet, so I cant really tell you how that would work. Id imagine you could also switch to a dual gauge or something and have that mounted on your handlebars.

@josephtizol9695 8 ай бұрын

I’ve got a 93 FLHTP that I turned into a Tour Glide yours looks the same as his underneath the gauges you should be able to do just what he did in the video

@zacharyjohnson2914 2 жыл бұрын

What size risers? And height on bars?

@lemonheadgarage 2 жыл бұрын

Hey Zach! Thrashin high bends and 5.5” pull backs!

@Aero9k 2 жыл бұрын

You didn’t add the link to the risers though. What brand?

@louisalvarez3363 2 жыл бұрын

So about 10” All together?

@ryanlescarbeau9401 2 жыл бұрын

Bars are 5.5 risers are 5.5 thrashin adapter 2”

@laineedwards6174 2 жыл бұрын

Did you reuse all of your stock stuff on what appears to be maybe a 12in bar setup?

@mrbrad3236 Жыл бұрын

I have a 93 Electra glide how do I remove the air ride to put on different bars or do I need to.

@lemonheadgarage Жыл бұрын

If i remember correctly, the air ride on this bike was pit separately. Therefore, I didnt really have any issues with the air ride when changing the bars!