Thanks, you covered everything I was worried about in 5 minutes, excellent!
@how2q3 жыл бұрын
One option you could throw in there is a sanding disc and that i would use now to make the job quicker. Harbor Freight has some cheap ones that will do the job
@pete76194 жыл бұрын
Thank you for this video I am in the process of purchasing a house with wooden beams throughout and they are painted black. I am look at returning them to a more natural look and was thinking of a belt sander. Most videos I have seen use a sand blasting technique which wouldn't suit, so this video was perfect. Thank you
@how2q4 жыл бұрын
Glad it helped...good luck.
@mrchedda3 жыл бұрын
Hey Pete... what route did you end up taking? I’m trying to restore just one beam and a post. Any suggestions on how to best restore back to bare wood?
@Millie21782 жыл бұрын
Hi Pete, looking to do the same to our beams. Did it work? Did it look okay?
@dougm30162 жыл бұрын
I'm in the process of stripping five very old and irregular beams in-situ, each about 3 yards long. After a little research I ended up buying a battery powered angle grinder. Combined with a 40 grit flap disk it works a treat. I did briefly try drill and wire brush cup but the grinder wins hands down.
@how2q2 жыл бұрын
Yes…made this video a while ago. Would now have used the grinder!
@jamesf94923 жыл бұрын
A good sandblaster will strip and then raise the grain by removing the softer wood. I used glass blast media to remove stain on the beams in my old home and it looks amazing with the raised grain. A wire wheel on a drill works for touch up work.
@how2q3 жыл бұрын
Thank you for that...knew there had to be easier/quicker way.
@how2q3 жыл бұрын
Yup u sure can...thats sweet!
@kimberlydeprey3 жыл бұрын
Well done. Thank you
@how2q3 жыл бұрын
Hope it helps!
@Simlife101 Жыл бұрын
Can you wrap paint stripper with cling to speed it up