#Thrift

Рет қаралды 15,523

Jamaison Schuler, Fused Glass Artist

2 жыл бұрын

As you probably know from my previous videos, I love going thrifting (and hunting through clearance sections) to find items I can use in my glasswork. This vase in a stand did not disappoint! I brought it home, donated the glass vase, and kept the stand as inspiration for my latest creation! #Upcycling at its finest!
Looking for my decals or bails, Amazon store, Bullseye resources, other suppliers, my Facebook page and more? ALL my links in one place! linktr.ee/jamaison
Featured suppliers:
Stainless steel mold and fiber liner from Bonny Doon Glass: bonnydoonfusedglasstools.com
SSArtGlassStudio on Etsy: www.etsy.com/shop/SSGlassArtS...
Wilderness Glass by Lori Moreno: wildernessglass.com (for COE 96, check out similar designs and quality at bethalongi.com)
Tabitha’s Glass Emporium: www.tabithasglassemporium.com
Kaleidoglass from Nancy Sala: [sorry - Nancy has retired from glasswork]
Ranger Pens can be found on Amazon: I started an Amazon store featuring my favorite glass tools and supplies. I do receive a small commission for any of your purchases - thanks for supporting my free KZfaq content! www.amazon.com/shop/jamaisonschuler
First firing of the glass scrap to make my background:
400-1100-45
50-1225-90 (extra long bubble squeeze)
600-1480-20
9999-900-3 hours (long anneal for thicker piece)
100-600-off
Tack fused floral components:
400-1280-10
9999-900-2 hours (longer anneal for thickness of tulip)
Off (no further ramp down)
Final contour fuse of final panel with all components added:
150-900-0 (slow initial ramp because of thickness of base and some components)
300-1250-30 (not much bubble squeeze needed but a soak here warms everything up evenly)
600-1350-10
9999-900-8 hours (so much thickness and contour fuse calls for extra conservative hold)
50-700-0 (conservative, slow ramp down)
100-300-0

Пікірлер: 80

@alisongoerner7457 7 күн бұрын

So beautiful and just my style. So inspiring!

@janedasilva70 3 ай бұрын

Beautiful❤

@pattimessenger6214 Жыл бұрын

You make such beautiful glass art! And, I really appreciate when you give a shout out to your glass art suppliers! Thank you for sharing!

@dondoyle111 10 ай бұрын

Not only is your talent superior so Is your artistic vision - your videos just keep getting better and better - thanks for your efforts!

@palmislandglassworks545 2 жыл бұрын

Great video and beautiful piece! When I need dimension, I use Glassline paints sprinkled with a matching Bullseye powdered frit. Depending on my needs, I apply the paint with anything from an eyeliner brush, a fan brush, or sometimes just a tip on the applicator bottle. The powdered frit sticks to all of it nicely.

@JamaisonSchuler 2 жыл бұрын

Great idea!

@cmj3374 5 ай бұрын

I love your videos but I never saw the whole shot of it... in the stand... did I miss that, saw all the different areas but not the whole shot of it from a few steps back. Awesome piece!!!

@AnnetteRintelmann 11 ай бұрын

So much color. Very beautiful!!!!!!!!!!!!!!!!!!!!!!

@trashdog88 9 ай бұрын

Absolutely beautiful. Thank you for sharing your gorgeous glass

@marcyb123123 Жыл бұрын

I’m soooo impressed and soooo inspired! Thank you! I don’t even have a kiln yet so miles away from anything like this, but there is hope!

@debibrown7975 8 ай бұрын

Jamison I am obsessed with your videos. Creative,easy to understand for this newbie, great info. Thank you.

@JamaisonSchuler 8 ай бұрын

Awesome, thank you!

@suzannetaylor1556 6 ай бұрын

Stunning!!!!! Love the dimensionality.

@debshank4331 9 ай бұрын

Amazing!!

@JamaisonSchuler 9 ай бұрын

Thanks!

@KathyFitz1113 2 жыл бұрын

Wow! That is so beautiful!

@katherinerothgeb2584 2 жыл бұрын

So beautiful. Love each piece.

@maggietaylor3756 2 жыл бұрын

Unbelievably beautiful. Thank you so much for your inspirational videos Jamaison.

@Dulcilady Жыл бұрын

Truly lovely. Thank you for sharing your process

@suebishop9435 2 жыл бұрын

Great job! I love the flowers.

@barbaralester6803 2 жыл бұрын

This is fun - how lucky to find that base - you are so good about sharing your info!

@magali44276 2 жыл бұрын

Just stunning!

@kimwelles954 11 ай бұрын

Wow! Incredible piece. I hope I do half as well when I finally get a kiln. You are definitely inspiring me to change my mindset when I go shopping. 😊

@uglypatriot5171 2 жыл бұрын

Beautiful 😍 A work of art! The sunflower 🌻 shading turned out well 😀

@kaymcconnell4221 2 жыл бұрын

Just outstanding!!

@user-uk6qe2oh6k Жыл бұрын

That's just beautiful!

@stephanietimson245 2 жыл бұрын

Absolutely gorgeous 😻

@MrMikeP12 2 жыл бұрын

Amazing. Your videos are awesome! thanks for sharing

@kerryberman609 2 жыл бұрын

Wonderful artistry!

@barbroaugustin3783 Жыл бұрын

Great piece and video, you are a star!

@catheyfoss2890 2 жыл бұрын

such a happy piece! Thank you

@laurajones6486 2 жыл бұрын

Gorgeous piece.

@nancysala7769 2 жыл бұрын

Outstanding pieces ♥️♥️

@JamaisonSchuler 2 жыл бұрын

Same to you! 😉

@janetwallace5780 2 жыл бұрын

Outstanding Jamaison!!

@LBCGD 2 жыл бұрын

Very lovely.

@MsBrendaMiranda 2 жыл бұрын

Wonderful piece! I just bough some enamels and look forward to your experimentation to shorten my learning curve. :). Thanks for your videos.

@McGeeglass 2 жыл бұрын

Pretty!

@rosannepainter6766 2 ай бұрын

Tabatha two!

@TabithasGlassEmporium 2 жыл бұрын

Beautiful

@cathmaguire7887 7 ай бұрын

Wow

@suedonnenwirth3269 Жыл бұрын

❤beautiful

@gailkops5644 2 жыл бұрын

You find the best components to show off your talents! Well done! I've been thinking about "cupping" some flower elements to add dimension by slumping them before the tack fuse. Absolutely love the drops and the calla lilies. Super!

@JamaisonSchuler 2 жыл бұрын

Yes, I think Tabitha has done something like this too? It’s an awesome idea! This may have also been a good piece for freeze and fuse elements (that’s a new territory I’ll be tackling soon).

@erinbradshaw1024 2 жыл бұрын

Awesome work & video. Such inspiration!! Thank you. We (our worst critic) can always find tiny issues that we think we can improve on, but quite honestly it turned out great.

@JamaisonSchuler 2 жыл бұрын

Thank you!

@catherinedwyer1585 Жыл бұрын

Fabulous

@terrygarner7656 2 жыл бұрын

Wow!! 💖

@dlarson9850 2 жыл бұрын

Incredible piece. You’re so talented. I was going to suggest Colors for Earth enamels for the shading on the water jet flowers. Thanks for sharing. Can’t wait for the next video.

@JamaisonSchuler 2 жыл бұрын

Yup, I plan to put these pens to the rest with powders, enamel, mica, etc…

@AnnetteRintelmann 11 ай бұрын

That looks like 2 ghost holding hands

@bonnieerickson8567 2 жыл бұрын

Beautiful colors! The frame is a bit too busy??? Such wonderful ideas! Thank you for sharing.

@JamaisonSchuler 2 жыл бұрын

I kind of thought the same thing about the stand… it was good as a thrift find, but I would not use that regularly for lots of glass pieces because I don’t want anything to cover up the glass!

@jodysauer9040 Жыл бұрын

❤ 💐

@jmeszler11 Жыл бұрын

Your piece is lovely!! Thanks for sharing through videos. I too love Tabitha and purchase her murrini. Would you mind sharing the links to Nancy and the others you mentioned? Thanks again.

@JamaisonSchuler Жыл бұрын

Thank you! I shared all of those in my video notes. If you don’t know how to find video notes, here’s a quick overview: How to find detailed video notes in KZfaq kzfaq.info/get/bejne/ftSZlZyFtLa9dXk.html

@lindawirtenberger8241 2 жыл бұрын

See what available on Etsy I want to buy you make my mind race. Thanks for the wonderful ideas.

@susanhardy1443 20 күн бұрын

Fantastic! Just love it!! Would you share how l you calculate your cost on all the additions when pricing to sell it?

@JamaisonSchuler 20 күн бұрын

Most of it is just total gut feel. I don’t get that specific.

@FullMoonLoonDesigns 2 жыл бұрын

Love this! I always enjoy strolling through thrift stores and antique stores looking for things I can upcycle or use in my studio. Is this the stainless frame that goes with the one plate mold? I’ve had the plate molds for awhile and just added two of those frames. Haven’t tried them yet but I sure have plenty of “scrap” to do so! Thanks for sharing! I think I need to go back to Tabithas’s shop! Recently got some pretties and love all of it!

@JamaisonSchuler 2 жыл бұрын

Exactly right… I have two of the rectangle platter molds and love that this stainless steel frame matches!

@MIGUELMEDINA-ey8qs Жыл бұрын

VERY NICE PROJECT CAN YOU SEMD ME ON WERE YOU GOT THE MATERIAL, AND FIRING SCHEDULE, THANKS IN ADVANCE

@JamaisonSchuler Жыл бұрын

These are always in my video notes on KZfaq.

@carolynk8776 2 жыл бұрын

It’s beautiful! ❤️Why add the clear powder?

@JamaisonSchuler 2 жыл бұрын

Thank you! The clear powder does two things: it can help address the devit that I sanded off, and it can support a nice glossy finish over some of those components (like the mandalas that had a dull, matte appearance from being cut with a saw). Those would have likely fire-polished nicely anyway, but the powder can help. I was a bit nervous that 1350 was pretty low temp for the powder, so that was a risk, but it turned out fine. For more on powder and devit, read this from Bullseye: www.bullseyeglass.com/methods-ideas/quicktip-use-bullseye-clear-powder-to-fix-surface-flaws.html

@carolynk8776 2 жыл бұрын

@@JamaisonSchuler thanks. I think I missed the part where you had devit. And I hadn’t thought about the unpolished edges of components. This was a great explanation. Appreciate all you do.

@chrisellvasiliou5239 2 жыл бұрын

Curious as to why you sprinkled clear powder over it? Is it just for the sheen or is there another reason ? Love your work & videos ♥️

@JamaisonSchuler 2 жыл бұрын

@ArtisticBlessingswithShawn Жыл бұрын

If I have never worked with glass or a kiln before, but want to start creating some fused glass and kiln formed glass, what is the best website or you tube video for me to go to?

@JamaisonSchuler Жыл бұрын

Well, I do think my channel has some good content on it. There are lots of great groups on Facebook. Also fusedglass.org

@ArtisticBlessingswithShawn Жыл бұрын

@@JamaisonSchuler I love your channel-I will definitely keep watching. Do you have a video that talks about what a good kiln might be, what your “schedule” numbers mean etc…. Maybe a list of tools to start with?

@JamaisonSchuler Жыл бұрын

@@ArtisticBlessingswithShawn no, sorry, I’m really not a teacher and therefore don’t offer that kind of info. I suggest you read some of the great content on kilnfrog.com and if strongly suggest you spend the affordable amount on Bob Leatherbarrow’s book on firing schedules. www.leatherbarrowglass.com/purchase Some good info on the fused glass.org site I already meantikn, and Google Bullseye glass tech notes for lots of free info.

@ArtisticBlessingswithShawn Жыл бұрын

@@JamaisonSchuler Thank you so very much. Your videos have already been quite helpful also.

@gbleimeyer3659 2 жыл бұрын

Beautiful panel. Love the thrift frame. Mica can be used for this technique.

@debibrown7975 8 ай бұрын

What is tecta?

@JamaisonSchuler 8 ай бұрын

Tekta is clear sheet glass from the Bullseye glass company

@debibrown7975 7 ай бұрын

I went on Bullseye and is it the Tekta? What mm do you suggest and is it only compatible with COE 90

@JamaisonSchuler 7 ай бұрын

@@debibrown7975 the clear I used is Tekta, and I almost always use 3mm. Bullseye glass is generally known as COE 90, though Bullseye does not claim that specifically

@lornasaner1130 2 жыл бұрын

Why not just use the vase? Glue the fused piece on top…

@JamaisonSchuler 2 жыл бұрын

Personally, I thought the vase wasn’t attractive. And when possible, I want to use heat work and the kiln, not glue. I’m sure someone could have used the vase and done exactly what you suggest, but it’s just not my style.