Subaru Key Fob Not Working

Рет қаралды 27,332

2 жыл бұрын

In this video we take a look at my 2009 Subaru Tribeca Key Fob. This fob still will not work with the remote buttons even after new 1620 cell replacement. lets look inside and see if we find anything that may hinder this fob from working. Hope you find this video helpful and thanks for watching!
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
Jewelers Screwdriver set if needed: amzn.to/3THDqwd
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
150W Load Tester if needed: amzn.to/30i8sn8
Board Holder if needed: amzn.to/3881akA
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amt...
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low...
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/pre...
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dua...
NF Mechanic Tweezers if needed:
northridgefix.com/product/mec...
Solder wire 100g 60/40 if needed:
northridgefix.com/product/bes...
NF.Mini Soldering Pen if needed:
northridgefix.com/product/por...
NF V2.3 Microscope if needed:
northridgefix.com/product/mic...
NF Universal Board Holder if needed:
northridgefix.com/product/uni...
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hep...
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/att...
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/gri...

Пікірлер: 23

@jaday5424 Жыл бұрын

My fob stopped working and your video inspired me to take it apart. Didn't have any corrosion, but I found tiny piece on the green board that was out of place. I put it back and it works like a charm. Saved me a trip to the dealer and probably a ton of money, and I'm no longer frustrated when trying to open my door or worrying I've left it unlocked. Thank you!

@brittanysgarden Жыл бұрын

This video saved me over $350 for a new key fob! Mine was working maybe 1 out of 5 clicks, if I was lucky. Now it works EVERY click! On a 10 year old fob! THANK YOU!!! :) 2013 Subaru Forester X 2.5 Premium in case anyone else is curious and wants to try on theirs.

@douglasglenn7438 2 жыл бұрын

Went to dealer and had FOB fixed when I got home it didn't work used your advice and its working fine Thanks

@kimbell4307 8 ай бұрын

I've changed the batteries in my car's key fobs several times without incident until today. Your video and the tip about the arrows lining up on the button covers was exactly what I needed! As soon as I fixed that, everything worked again!! Thanks for the tip!

@chizick14 2 жыл бұрын

I bought my first Subaru 5 years ago, I have found it easy as a beginner to work on. One of the best financial decision I've ever made! Thanks for the video.

@dorisjd Жыл бұрын

Thank you for sharing this information. Changed battery today and now the key is working properly! 😊

@dylansmiitth 2 жыл бұрын

Your a Legend, just fixed my key by seeing one of the parts of my circuit needed soldering.

@electroddxful 2 жыл бұрын

Came from Northridgefix and enjoy your channel as well. Being in electronics repair myself. Im not doing much repairs these days due to back issues. But once in a while it’s have to be done. New subscriber to your channel. Nice repair 👍🙏👍🙏👍🙏many blessings

@ThriftyToolShed 2 жыл бұрын

Thanks RayFpv! Many blessings to you as well!

@crutchclargo Жыл бұрын

Good straight forward information. I will add my experience about my 2013 Subaru Outback. 10 year old battery in the main key fob gave up the electron ghost on my last click to unlock the door. Exceedling grateful it was not the last click to lock the door. :) Changing the battery is brain-dead simple, but there do seem to be a mish-mash of fob styles used across the brand. My fob is the same as in this video...others have the same as used in 2014 and 2015 models. I checked the battery, which at 2.9 volts on these CR1620 is a dead battery. I then checked the battery on the spare key and it was 3.0 volts. The voltage on the spare was too close for comfort so both key fobs got new CR1620 cells that had 3.29 volts on each cell. These are lithium cells and the nominal charge is 3 volts, however, the full charge will usuall be 3.3, or there abouts. Once these cells hit that 2.9 vdc they are essentially dead for most electronics. At 3 volts, they are on their way to being dead and it is a luck of the draw, based on the electronics how long it takes for the cell to get to 2.9 vdc. I have seen a few videos where the newer fobs will not function at 3 vdc. If in doubt...change the battery.

@ThriftyToolShed Жыл бұрын

Thanks for sharing your experience with us. Very true indeed, the 3V lithium does seem fine at close to 3V and can still be dead. It is best to test under load and some testers similar to the battery tester I have will have a small resistor across the meter contacts to pull just a little on the cell to show a true reading. Under load these cells will drop voltage fast if drained, but they will bounce back up sometimes close to 3V once load is removed.