Toyota 4.5L Inline 6 Engine Rebuild - Full Teardown EXPLAINED

Toyota 4.5L Inline 6 Engine Rebuild - Full Teardown EXPLAINED | 80 Series Land Cruiser

Рет қаралды 53,835

Жыл бұрын

The Venerable 80 Series Toyota Land Cruiser. What powers it, what sets this engine apart from other 4x4s, and why are these trucks so reliable? It's a giant 4.5L iron block engine called the 1FZ-FE. In North America, we got either the 4.0L or 4.5L landcruisers that came with the 3FE or 1FZ-FE inline 6 cylinder engines. We did not get the diesel option. This video is a complete 1FZ straight 6 engine teardown with DETAILED how-to commentary of the entire process. I will be rebuilding and overhauling this motor for my landcruiser build project with over 200k miles.
There are definitely quite a few things that set this engine apart from a light duty engine such as oil squirters, crank girdle, built in oil cooler, cast iron block with a solid deck, etc. Quite a few similarities to the 2JZ! They may not make the most power or get the best gas mileage, but they're a stout engine that will surely last a long time.
Previous Episodes in This Build Series:
► 1FZ Bottom End Teardown: • INSIDE A 230,000 MILE ...
► 1FZ Engine Teardown (cylinder head removal): • 1FZ-FE ENGINE TEARDOWN...
► FZJ80 Engine Removal: • Removing My Land Cruis...
► FJ80 Valve Cover Gasket, Fixing Oil Leaks, and Finding the Broken Timing Chain Guide: • Valve Cover Gasket Tur...
► FJ80 Intro Video: • I Bought My Dream Proj...
Playlist:
► • 1993 Toyota Land Cruiser
Camera Equipment:
Sony ZV1 Camera: amzn.to/3VX5koq
Rode Microphone: amzn.to/3He5Eux
Lens: amzn.to/3VYL0TD
Tripod: amzn.to/3BcYiDL
Follow me on Instagram!
/ _rmgarage
#toyota #howto #auto #rmgarage #landcruiser #engine #motor #diy

Пікірлер: 47

@RM_Garage Жыл бұрын

This thing runs now! kzfaq.info/get/bejne/ra2ErNqDtOCloX0.html

@motor.mausGarage Жыл бұрын

Excellent video, I think my favorite thing about older Toyota engines is the simplicity of the timing components. Minus the timing guide of course 😅

@RM_Garage Жыл бұрын

Thanks man!

@futurorey 3 ай бұрын

These videos are so helpful! Just started my '93 rebuild. Currently trying to unfreeze the manifold to downpipe bolts since it's straight piped after a cat theft

@electrikoptik Жыл бұрын

There were three 1FZ's available in the Land Cruiser. There is the 1FZ-F with 190hp (carburator), the 1FZ-FE with 212hp and the later updated 1FZ-FE with 240hp (available in the 105-series etc).

@NKPGarage Жыл бұрын

Fantastic work buddy! I’m currently restoring a 1997 with a full tear down as well. Fun times!!

@RM_Garage Жыл бұрын

Thanks!

@gabyherrmann9894 Ай бұрын

The old school of TOYOTA engine engineering , unbeatable and you can rely on them totally. I got to know some engines with more than 500 000 km.

@meganfoley4123 Жыл бұрын

So much good info in this video. Love the detail and tips!

@guitar14 Жыл бұрын

Such a great video. Clear. Concise. Lots of information. This is how you do it.

@RM_Garage Жыл бұрын

Really really appreciate it!

@alkalinetaupehat Жыл бұрын

When I tore down the 350K-mile motor in my '96 LC the bearings looked pretty similar. Good video! Make SURE the shop doesn't hot-tank the block - the acid will eat up the brass oil pump bushing. I don't think Wit's End stocks them anymore and I don't know whether the others on the market are good or not.

@RM_Garage Жыл бұрын

Nice! Yeah I told them not to use a caustic solution to clean it. If it comes back messed up, Yota1 and Landtank sell the bushing.

@hansfrossen1623 Жыл бұрын

Awesome! Planning the same job on my 1994 FZJ80. Best!!/Hans Sweden!!

@RM_Garage Жыл бұрын

Thanks! Good luck.

@malamuteproductions Жыл бұрын

Awesome video mate, I have a 96 fzj80 here in Australia. She is getting on in age a bit but It's the best car I've ever owned and being honest probably the best one I ever will.

@goneballistic 3 ай бұрын

my favorite part was removing the coolant pipe that goes to the heater. That was the best.

@lukebrizzi2212 Жыл бұрын

Awesome video mate. Quality editing and shots. Keen to see the build come together. All the way from Australia 🇦🇺

@RM_Garage Жыл бұрын

Thank you!! Wish we had your powertrain over here for the 80 series!

@lukebrizzi2212 Жыл бұрын

@@RM_Garage Myself included mate, Turbo Diesel 80s with 400,000kms are still selling for 40k Aud. Car markets bananas over here.

@kriscarmelo Жыл бұрын

I saw a Lexus Lx450 mint condition. The guy is the original owner. Had no rust. The interior was like new. So wild. I begged him to let me buy it when he wants to sell it. He said Hale no! The new ones are too weak. 😢

@bratan9430 Жыл бұрын

Some great content over here! I would love to have a power point of the process 😅 I am a mercedes sedan guy, but i started looking for a car that will save me in case of critical conditions like the apocalypse and stuff… All my research led me to this car with this “bulletproof” engine. So thank you for this combined knowledge my friend. I will definitely check out your channel 🙏 Greetings from Switzerland

@brkbtjunkie 10 ай бұрын

It’s bulletproof, but it won’t get you very far with its 11mpg mileage haha. Invest in an auxiliary fuel tank

@noobierice7274 Жыл бұрын

Love the video! I feel like if youre gonna tear it down, might as well build it for boost 😉

@RM_Garage Жыл бұрын

I really thought about it but I’m seeing a lot of people have issues with the 93-94 OBD1 motors and boost due to tuning troubles. Would have to switch to a standalone ecu

@getblowd407 Жыл бұрын

Beautiful

@RM_Garage Жыл бұрын

Thanks!

@einfelder8262 Жыл бұрын

Love the way he praises Toyota engineering while pulling down an oil soaked engine with a chain tensioner/guide failure and a cracked block......

@RM_Garage Жыл бұрын

Haha! I mean it was still running with all those issues right? Lol. Thanks for watching

@averydeweese1780 4 ай бұрын

Give me another car with a snapped timing guide and a cracked block that you could beat on like a 80 series Land Cruiser

@jtburg88 Жыл бұрын

THIS IS SO AWESOME! Do you happen to have the bolt size that you mounted to the engine stand?

@RM_Garage Жыл бұрын

I *think* they are m12x1.25 and 3.5 - 4” long. Best way is to take your bellhousing bolt to the hardware store and find something similar.

@uziesautorepairs6121 Жыл бұрын

Liked 🎉500🎉 now good work

@SuperHotoke Жыл бұрын

新品部品は入手可能なのですか？廃盤部品も多いと聞きます

@alirahmani461 11 ай бұрын

👍

@brkbtjunkie 10 ай бұрын

It’s crazy to me that a in-line 6 only gets 11-13 mpg

@Silentway247 Жыл бұрын

What paint marker do you use?

@RM_Garage Жыл бұрын

They are just standard paint pens from Amazon called “yellow paint markers pens”. Sorry I can’t be of more help. They come in a 6 pack.

@orpiv Жыл бұрын

Did you have a clanky rattling noise with the bad timing chain guide??

@RM_Garage Жыл бұрын

Not at all, surprisingly. The engine was dead quiet.

@freddywsn3447 Жыл бұрын

Imagine throwing a turbo in this guy.

@RM_Garage Жыл бұрын

I wish, but would require standalone engine management. It's an OBD1 (93-94) 1FZ...they're known to be hard to tune :(

@freddywsn3447 Жыл бұрын

@@RM_Garage Oh.. Thats sad and true. Maybe in another project? 😉

@RM_Garage Жыл бұрын

*Here is how I fixed the crack!* kzfaq.info/get/bejne/oa6DZLGlqJrYcXU.html

@sha514 Жыл бұрын

Can you send me the link how to remove engine from 80 series please

@RM_Garage Жыл бұрын

kzfaq.info/get/bejne/iqyFo6Z4v9bbko0.html

@user-fe5yb3rc3v Ай бұрын

Слишком быстро говоришь, не успеваю за мыслями.