I love how your no bs and straight to the point with these videos. Your also clear and simple with your explanations so it’s easy to follow along and learn
@KULLYCO11 ай бұрын
Hey man! appreciate you saying that! I am still pretty new to the KZfaq content creation, but trying my best! Want to be as clear as possible with the message so people can actually get value! Thanks for watching my stuff!
@MK_Jynx11 ай бұрын
@@KULLYCO Anytime man 🤝 Keep on Killing it!
@mustangman37699 ай бұрын
My welding has majorly improved thanks to your videos. I wish you taught my college lectures lol
@KULLYCO9 ай бұрын
I love to hear that, man!! Thank you for sharing. I am glad the videos have brought you some value. I will be doing all new welding videos again soon!
@franklynpertuz766926 күн бұрын
Thank you thank you so much for sharing yes I did I'm not even a welder but I did learn a lot from you you're a great teacher
@KULLYCO26 күн бұрын
@@franklynpertuz7669 thank you sir- really appreciate the words- glad you were able to get value out of the content .
@TheOriginalHoser4 ай бұрын
Great video , straight to the point , no rambling bla bla bla
@KULLYCO4 ай бұрын
Thank you, I appreciate that!
@JG-ny8hz8 ай бұрын
By far the best video ive seen on welding stainless steel
@KULLYCO7 ай бұрын
I really appreciate that, man! Thanks for watching!
@tylerdoyon75259 ай бұрын
Man you are the kinda teacher I wish I had in shop class. Makes me want to learn. I might just pick up a rig on black friday.
@KULLYCO9 ай бұрын
Glad you enjoyed it! I’m still pretty new to the KZfaq game but hope to keep getting better . Go for it , man!
@WilloW00245 ай бұрын
Thank you for the informative video and the rest of your content. I followed your tips and was able to teach myself how to TIG 16 ga stainless.
@KULLYCO5 ай бұрын
Thats awesome to hear man, glad I was able to bring you some value!
@mountainstargarage45987 ай бұрын
Hey kully! Just wanted to thank you for the eye opening tip on amp setting. I’ve been tig welding for a year now and always set the amps higher then needed. Sometimes leading to inconsistent passes. Now knowing to set it at a amp range where I can floor it it’s been a lot more consistent ! So I appreciate that and thank you for this vid ! 🤝
@KULLYCO6 ай бұрын
You bet man! I am glad you were able to get value and learn something! Just sharing my knowledge ive picked up over the years.. thanks for watching!
@diederickr4 ай бұрын
100% im a beginner and i hold my breath, breathing makes it heaps easier.
@KULLYCO3 ай бұрын
Yes, you definitely need to breath! Keep practicing and don't give up! You will keep improving over time!
@Crucial_End Жыл бұрын
Nice video! I was TIG welding for the first time today in class. Im a construction carpenter but my back is screwed up and I need to switch to something with more ergonomic consistency like working in a shop instead of construction sites. Did not use a filler rod though just welding 1.5 mm mild steel strips together in 45 degrees to practice before Im going to weld together this table grill project that they gave us. It was a lot of fun and extremely satisfying. Im looking forward to more of these beginner videos.
@KULLYCO Жыл бұрын
Thanks man! I appreciate you watching. I’m glad i was able to bring a bit of value. Yes, that is a great way to start - just fuse material before using rod . They call that autogeneous welding. Get used to moving the torch and running the foot pedal !
@WelderSkills.18 ай бұрын
Okay, I've been welding all kinds of stuff for many years, even tig welding, and I've never counted how many times I dip the filler in the puddle. Here is why " Why would I want to spend so much time thinking hmm am I dipping this filler enough times or not ?" When I focused mainly on just getting the job finished. Stainless steel doesn't always need to look like a stack of dimes when you are finished welding it . That's why the lay wire technique is just as simple as the dipping technique. How you tig up the job is mostly all a preference, not a requirement by code. So, just keep on doing what you feel is best for you. Feel free to tig weld some soda cans together whenever you have a chance. Make sure you use some very low amps. Lower than what you amps where on welding the exhaust pipes. Other than that nice-looking welds to be fair.
@KULLYCO8 ай бұрын
Thank you sir! Yes I agree, there is always difference strategies. I like to count dips to keep your start and stops evenly spaced. I will be doing all new welding videos again this winter! Im going to dive in a bit further as the first go around I was still pretty new to the youtube game. Thanks for watching!
@MarkoVukovic09 ай бұрын
Excellent tips, thank you. This helped me immensely with my first exhaust project. I did have a laugh at your captions, "back Persian"
@KULLYCO8 ай бұрын
HAHA thats funny- musted have missed that ! Glad you were able to get value out of it, thank you for watching!
@twentyninecycleworks Жыл бұрын
I picked up my TIG set up years ago but never built enough confidence to try an exhaust. Your shorts and this video gives me some motivation to try it. Love your delivery and the way you cover the material that you are teaching. Keep up the good work!
@KULLYCO Жыл бұрын
Thanks dude ! I really appreciate the words. I’m glad my videos have brought you some value- that was my aim! Keep practicing with that TIG torch.. you will surprise yourself on how fast you will get better ! Good luck with the exhaust !
@johnshaft561310 ай бұрын
Great video! Good, simple advice.
@KULLYCO10 ай бұрын
Thank you! I appreciate you watching !
@patrickgreen974711 ай бұрын
Good tips…!! Nice well constructed video.
@KULLYCO11 ай бұрын
Thank you! Appreciate you watching
@mrvector257 Жыл бұрын
Keep it up, man. These vids have helped me so far. Would be nice to see some live shots of the weld pool, but the basic information you provide is still useful.
@KULLYCO Жыл бұрын
Hey man! Thanks for watching - I’m glad they are helpful. Yes - i will certainly try and work that in soon- i am trying to get better at the filming / editing portion of KZfaq ! I’m still pretty green at all of this :)
@mrvector257 Жыл бұрын
@@KULLYCO Seriously man, you're doing great so far. Keep the info coming! You've obviously got the knowledge and are doing great job at explaining it. I'm a green hobbyist and you've already helped me learn a lot. Teaching a skill is difficult since everyone has their own way of learning, but your explanations are objectively spot on. You definitely have the right stuff so just keep up the great work and it'll pay off in more ways than you can imagine. Cheers!
@KULLYCO Жыл бұрын
@@mrvector257 i really appreciate that man- genuinely!! I’ve had a great time making content so far . I hope to keep getting better and providing a bit of value to some folks ! Thanks again for watching !
@luissaldana30487 ай бұрын
Very nice job 👍 !
@KULLYCO7 ай бұрын
Thank you! Cheers!
@Charlieman. Жыл бұрын
Super impressive and great explanations of the details/ approach. Channel is gonna grow. Nice job.
@KULLYCO8 ай бұрын
Thank you, sir! Appreciate the words- I will try and keep the content coming! Thanks for watching.
@shawnbroman Жыл бұрын
Super vid bud! 🤟
@KULLYCO Жыл бұрын
Hey I appreciate it - thank you for watching. Hope you were able to get some value out of it !
@user-kh2yl6nn3l11 ай бұрын
I just sub'd . you seem like a pretty good instructor . :) I'm kind of a 15 dip guy, not good enough on the bends to pull off much more consistently . lol Thanks for uploading .
@KULLYCO11 ай бұрын
Hey I appreciate that ! Thank you for watching my content . I’m glad you are finding some value in it! Will try and keep the videos coming . Doing a fun one this week on hammer forming
@user-kh2yl6nn3l11 ай бұрын
sounds good . :)@@KULLYCO
@stevenbarts3307 ай бұрын
instead of backpurging you can use solar flux
@KULLYCO6 ай бұрын
Ive never used flux! I stick with the purge:)
@SmokyRibsBBQ4 ай бұрын
So is this Super Missile tig rod the same thing as a ER-312 rod? Did a little research to find this rod and from what I'm seeing Super Missile is a brand name for Harris ER-312 stainless rod with a higher chromium content making it a great maintenance rod for harden tools, gears, etc.
@KULLYCO4 ай бұрын
It certainly could be! I have always called in supermissile with my suppliers- I've also heard guys use the term tensilweld for this specific rod.
@DuheSpeedShop8 ай бұрын
Awesome video brother! I’m getting ready to start welding my .060 thick down pipe and crossover pipe on my turbo suburban build, and I think your tips will help me tremendously 🤙🏻 got a sub from me man‼️
@KULLYCO8 ай бұрын
Thanks man! Really appreciate you watching and subscribing. Glad you are getting value out of the content. Good luck on your suburban build!
@TheKoosterify8 ай бұрын
didnt expect Jared Leto to teach me how to TIG weld
@KULLYCO7 ай бұрын
haha yep! hes a skilled welder :) nobody knew!
@forgottenknowledge89177 ай бұрын
Eshay bahhh
@KULLYCO7 ай бұрын
What you mean ??
@paulmcdonald3570 Жыл бұрын
I really appreciate your instruction! I am getting ready to weld a stainless steel 16g exhaust on my Opel Gt. Your video is very helpful in prepping me for this challenge. What would you say I’d the minimum size gas lense cup? The largest I have is a 12. Will this get the job done or do I need to make a purchase?
@KULLYCO Жыл бұрын
Hey man! Thanks for watching the video - I’m glad it’s been helpful . A 12 will be perfectly efficient . It just won’t sheild the weld quite as well- but you can still make a pretty / strong weld with a twelve . If you do more of it moving forward- i would jump up a size
@seanmccracken4270 Жыл бұрын
Great instructional video with very specific info about how you like to run your setup, thanks for sharing. I'm interested in trying the Supermissle .035 filler rod but could not find it lister anywhere, if possible can you share a link to where you purchase it?
@KULLYCO Жыл бұрын
Hello- thank you, I appreciate you watching.. I’m glad you were able to get value out of it. Yes you can get the supermissle welding rod at your Airgas location . They will know what it is
@jacobfurton65166 ай бұрын
How long do you like to pause after welding to either go to another spot or keep welding the same bead
@KULLYCO5 ай бұрын
I usally weld about three seams at a time.. allowing one to cool down for a minute or two before continuing the weld. That was material doesnt get too heated.
@kinezongu264910 ай бұрын
Hi where can we get the quick release on the purge blocker , TIA. Great video btw , very helpful, thanks
@KULLYCO10 ай бұрын
Hey thank you! I appreciate you watching ! I believe I got them through SPW. (Specialty precision welding) look up there site
@ceelos8711 ай бұрын
I have a miller 150STH and it’s a scratch start 😒 I bought a foot pedal for it and it helps controlling the amps instead of the hand trigger, any advice on welding with my welder? I would like a high frequency one like yours but i’m trying to work With what I got thx and great content really appreciated
@KULLYCO11 ай бұрын
Hey thank you for watching my stuff . As for how to operate your welder mode , specifically.. i can’t really help there , as I’ve never welded with that machine. But all tig welding / machines .. similar rules and techniques apply. I’ve used many welders over the years . Hope you are still able to get value out of the content . Good luck building your skills!
@itsjussjerry Жыл бұрын
What are your thoughts on fusion welding aka no filler if fit up is spot on?
@KULLYCO Жыл бұрын
I know companies that fuse / Autogenous weld there stuff and they seem to get away with it. It really depends what the application is for and how high the exhaust temps are going to get etc. Also it’s a question of durability and how long your hoping it lasts. I always use filler on street and race applications so I don’t have to worry about it.
@TheBoostFiends10 ай бұрын
Right now I’m in the process of building the hotside for a turbo kit. When I tac the stainless it tends to pull to that side causing gaps. Any tips or tricks to avoid that??
@KULLYCO10 ай бұрын
Make sure your tubing is sanded / cut very true . Where your pieces meet up it needs to be dead flat . Also , use small, cold tacks.. it doesn’t take much to hold material together . That should help with material moving around
@nickhuber92329 ай бұрын
What tig welder would you recommend somebody newly getting into the hobby.mainly looking to fab an exhaust for my bimmer
@KULLYCO8 ай бұрын
Yah I think so! What could it hurt? You might find that you really enjoy it!
@zomblake10 ай бұрын
Great video man. It was like a skirt should be - short enough to be interesting but long enough to cover everything. Subscribed before you even mentioned it haha And if you have that kully co sticker for sale anywhere, I’d slap one on my hood. Lemme know!
@KULLYCO10 ай бұрын
Thank you bro! Really Appreciate that . Glad you were able to get value out of it
@rockwasequim592410 ай бұрын
Great info,what gas?
@KULLYCO9 ай бұрын
Thank you! I am using pure argon
@BuddysBS Жыл бұрын
Yo I have a question I purchased 18g stainless pipe but the muffler I purchased is 16g . Can I weld 16g to 18g ? Or should I purchased all 18g material?
@KULLYCO Жыл бұрын
Hello! Yes you can definitely wed 16 g to 18 g no problem .
@BuddysBS Жыл бұрын
@@KULLYCO we appreciate you out here keep grinding pimp!!
@KULLYCO Жыл бұрын
@@BuddysBS I’ll keep doing my best ! ⚡️🔥🤠
@supercalcium10 ай бұрын
Thank you so much for sharing your knowledge. I have a question, why don't you use a face mask to protect your lungs? I TIG weld once and the argon gave me headache and lung pain. What Is your advise about this? Thank you
@KULLYCO9 ай бұрын
You are welcome, I appreciate you watching! Lung damage... that is the million-dollar question amongst welders :) I can't comment on this too heavily- I have welded for a long time without a mask- I hope someday it doesn't catch up to me in a bad way!
@supercalcium9 ай бұрын
@@KULLYCO well take care, you are an excelent welder and have a long life to live. Regards
@travismiller55487 ай бұрын
@@KULLYCOhexavalent chromium is no joke bro. Never weld stainless without mechanical ventilation.