A lot of "professional welders" (at least according to their keyboard skill) hates pulses. They think you should be able to weld a razor blade without any purge or backing, using foot pedals and that's it.

@6SpeedFab Just saying. To eliminate half of distortion (I.E. tack break) start weld halfway between tacks, weld to tack, then start at other tack and weld to first weld. Works in all welding processes.

excellent, I was searching for an instruction I can use for welding cracks of bandsaw, and your video is the most similar situation I could find, thanks

Wow, what a difference having all the rite kit and materials does. I have access to a mig welder, but not proper bench or tools to clamp stuff with, or the space to sit down and properly position myself etc. Often i have to do it outside where the gas gets blown away by the slightest breeze, and i am usually working on the concrete and leaning bits of metal against the wall or using objects to hold it into place and weigh it down etc whilst I weld it. You should do a challenge and show techniques of how to weld in austere in environments, as that's the likely environment where the average peasant will work haha!

Thats good. U have pulse and a aluminum plate to help with the heat. Great welds btw

Awesome really cool. I welded some with my Invertig but used filler 3/32 and same for tungsten I noticed you changed your on time and amps would you say those are pretty close? I think the ontime on the 221 is 40% default IIRC. Thanks for showing I always learn from you... Jason

My dc pulse only have hz settings and pulse amps (theres another to set the main amps. The two i mentioned is available only under dc pulse mode). How do i achieve similar ones like u did

Can you do a video on thin Aluminum as well?

Nice work! I'm a newbie too... never imagined 120 amps for a razor blade! I fully get the pulse time now! Would there ever be a need for an .040 tungsten??

(Giggled) I hand out razor blades for business cards and I used an old hobart tigwave 250 set to 20a/ manual pulse #7 stubby gass lense and about 10-12cfm. I found they do best if you tack one corner and leave a 1/16 gap on the other end and they pull together perfectly. I have fun with these parlor tricks

I am not a welder and I just started watching these type of videos out of all the welders out there what is the best time for body stretching panels together for little to no warping

I am a beginner and the majority of my TIG will be on auto bodies. Great demonstration of how to produce a low crown bead using increased pulse. How does pulses function work with filler? 👍👌✌️😃

good job

What type of welder is best used for thin metal like this is a higher Amp welder needed

Thanks for the video, if i'm getting this right you are never more than 15 percent of the 120 amps, and what makes the 120 amps such a good setting, and lastly what happens if you go with lets say 15 to 20 amps without the pulse. Thanks

Great 👍👍 can you pls reveal pulse and Amps settings as Sound quality is not as good as video quality. Please reply

Just wondering what kind of tungsten you use/ prefer please

Hello. Can you tell me what your welding machine settings are?

SO cool. I am setting my machine up exactly like yours and I am still blowing thru. I just can't figure it out : (

What kind of welding machine is this

Hi, a great welding machine. Where can you buy it?

I want a tig!

That automatic not manual is it?

Thanks for the video. What sheet metal is it? aluminum grade? or stainless steel?

Can you provide the model of your welding machine??

Hi what is your welding machine?

What about doing this without the coolingblock?

wow!!

Hi Which sort of torch is it? Model and brand if you please Cheers

I want a TIG machine to solder gold and silver, which do you recommend?

If you can show the machine and adjust on machine we want to know what kind

Hello Sir! I am in Miami and I have a broken piece of one customer to an equipment that is discontinued by the Manufactory and it needs an expert like you to weld. Impossible to find a person in Miami to do this. Do you take jobs like this? Pls advise!

Where's the welded beer can?

How i can weld like that?🥺

What gloves are those

Model nr .?

I'm gonna pretend that I didn't just see that massive fisheye lol.

SHEELMETAL STAINLESS SETTING FOR THIN MATIERAL AMP ARGON/HELIUM PRESSURE MATIERAL WIRE 42 80/20 25CFM .060 .040 38 80/20 25CFM .050 .040 33 80/20 25CFM .040 .035 28 80/20 25CFM .032 .035 18 80/20 25CFM .020 .020 10 80/20 25CFM .014 .020

that is 0.014 inch = 0.35mm thichness ,you have heat sink , so how can you weld thin tube ,round joint ? can not put heat sink on tube .. i have seen guys weld 0.28mm thick stainless tubing , no pulse no foot pedal no heat sink , try that so you know how good you are

I have to ask! is there any reason you won't tell people what type of machine you are using.?????????????????

It's overlapping ? That's cheating

This easy whit cold welder machine TL WELDER ITALY

why mine get cooked and black?

браво но аз го правя без пулс и е по трудно

Hang on, a 20 cup, 30 CFH (which is half of 60 rule of thumb cup size to follow), and 120 amps with a 1.6mm T. I'm Blown Away. I can't match or do that. "Edited - - - At 120 amps????? -

0.6, 0.7 mm still important to weld thicker not much hard and challenging

I have always been wary with welders who use autogenous welding because they really do ignore the purpose of filler and hence ....weld strength in the application. You measured 0.014" material thickness, but the fact of the matter is there is literally no material at the point of weld ...one simple reason why your tack failed ....there was literally no material at that tack. We all know what you were welding. The point of weld is at the sharpened edge (yeah sure, probably dull knife), but if you wanted to measure the material thickness for the purpose of identifying the amount of material at the weld, you should be measuring at that point. A very common problem with fabricators. They are not engineers. They are welders and some of them really want to make the weld "look" nice ....but under the surface ...there is no material. If this was in fact an legitimate welded part, this part would fail as the entire weld length, when measured, would be determined to be "undercut". Yes, the weld bead does look "NICE".

i could mig those box cutter blades with that set up , and think nothing of it ,, try razor blades , no backing , uphill vert then ill take note , till then , just another hot glue gun op

Mic on camera sucks. Muffled pulse parameters.

Thats not really thin metal welding because u have that alu block drawing all the heat, let it hang on the side and weld it then.

Helo you

Cheater! Lol!

Great and I got a crap Chineseium Tig,cut,mma thing that's not got pulse just amps FFS 😂🤣

You just show and we learn nothing.

Stop cheating..no pulse..free hand that shit

they are not razor blades

Hey man , a 5 year old can do it on pulse and with a chill block. Join the rest of us on the challenge and do it without..........

I'm just going say like it is...... this showed ZERO skill lol I've never seen people show off while overlapping blades and then fusing them..... weak