Tight Gap Overhead Root Technique ! TIG Welding Hack

No video

Tight Gap Overhead Root Technique ! TIG Welding Hack

Рет қаралды 20,348

Күн бұрын

Tight Overhead Root Technique! 🛠️ In this in-depth video, I'll unravel the nuances of TIG welding's Tight Overhead Root Technique. Unleash your welding prowess as I guide you through precise setup, ideal parameters, and hands-on execution for that perfect root weld. Whether you're a seasoned pro or a beginner eager to advance, this video is your key to mastering TIG welding intricacies. Watch, learn, and take your skills to new heights!
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my KZfaq channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
🌐 Stay Connected & Learn More:
📧 Email: info@x3mtig.com
🌍 Website: x3mtig.com/
📘 Facebook: / x3mtig
📸 Instagram: / x3mtig
☕️ Buy me a coffee rb.gy/34q2c

Пікірлер: 39

@Street-ty7ce 6 ай бұрын

Start my new welding job tomorrow on night shift baby lm a littler nervous but your videos help for sure !

@X3MTIG 6 ай бұрын

Rock on!🤘

@jonwoody3572 6 ай бұрын

As always, top-notch & great skills! Thank you from the other side of the pond !

@X3MTIG 6 ай бұрын

Thank you too!

@tinkeringinthailand8147 6 ай бұрын

I wish I could see my welding so clear LOL. Great video, love your welds.

@X3MTIG 6 ай бұрын

Thanks 👍

@dushalife2449 6 ай бұрын

Good root! 👍

@mohammadabuhamed3513 6 ай бұрын

You do everything with such an ease man! 🙌🏽

@X3MTIG 6 ай бұрын

I try, lol 😉

@ivo_7719 6 ай бұрын

Gran video amigo no dejes de hacerlos saludos desde argentina🇦🇷

@cidicley3162 6 ай бұрын

Thanks so much. I am from Brazil I will learning

@X3MTIG 6 ай бұрын

Best of luck!🤞

@gega9979 6 ай бұрын

Thanks bro you’re a good hand and great at detailed explanations.

@morgostas 5 ай бұрын

Very good and usefull demonstration. Thanks for sharing skills 🙏

@gparksmoswanted 6 ай бұрын

Nice!

@commietube4273 6 ай бұрын

👏🏻

@MasBen-wc4ff 6 ай бұрын

Thanks bro

@adamabarquez8257 5 ай бұрын

Are you pushing the tipnof your wire towards the inside of the pipe, like pressure against your bevels? Or are you pushing the wire forward into the puddle?

@X3MTIG 5 ай бұрын

Pushing filler rod into the puddle

@naydah 6 ай бұрын

Great skill 👍

@brianthomas7407 6 ай бұрын

to be honest, I've learned to just cut the gaps open and go.

@saint85 14 сағат бұрын

I have so much issues on the bottom and i get alot of suck back im trying to teach myself not one at my job can help so im trying can't decide on settings because we have older machines

@ninjatamim906 6 ай бұрын

I'm from Bangladesh

@TheoldRoss4 6 ай бұрын

Hell yea that’s the way to go on bottom if you can’t backfeed and don’t want to step down your filler size

@user-co6tl4ps4b 6 ай бұрын

Hi master, can you do some on hi low problem roots 😂

@Welderpemula8416 5 ай бұрын

Tolong sertakan ampere berapa dalam video dan pakai jenis filler apa terima kasih

@antoniioj13 6 ай бұрын

What iss the name of your welding job, are you apprentencship

@skullbeard1339 6 ай бұрын

It is interesting and informative. But it seems to me that this method is not suitable for all types of additives, if you use 13.23, it is unlikely that this will happen. When served in drops, it will boil. It can either be pushed through at a higher current or supplied from the inside . Is it 12.64 in your video?

@mddenis1 6 ай бұрын

Where do you work? In Europe? What's your opinion on esab 13.09 welding wire?

@skullbeard1339 6 ай бұрын

@@mddenis1 I work in Russia, in the very north of the Arctic Circle. I haven't encountered the 13.09 wire yet, but as I read it, it is low-alloy, so there shouldn't be any problems with it at all. But the additive 13.23 is highly alloyed for pipelines operating at low temperatures and with a low-temperature environment. She is very refractory, she needs an increased current and she really does not like procrastination. If you delay with it, it begins to boil and pores appear. It is always advisable to feed it inside the pipe when welding the root. There may be an exception, of course, if it is pushed through a welding bath at high current, but for this you need to use a thin rod and a high feed rate. But there is a possibility of error, you can fall a lot very much or, conversely, not give enough.

@mddenis1 6 ай бұрын

@@skullbeard1339Thanks for your reply. The funny thing is that I am also from Russia, but currently I work in Europe.

@skullbeard1339 6 ай бұрын

@@mddenis1 Why?!) What are they paying now? I'm from Koenig. There are a lot of jobs in Russia now and they pay normally. In Europe, they pay 13-14, but if you spread it out in a circular pattern, then there is no point. Here I get 220-240, paid inter-watch, sick leave and vacation, plus deductions. Well, the main reason why I'm not considering working there now is that the governments of those countries are against us now. Not only against our Government, but also against our people. And I think it's not worth working for their economy now. Let them bring "hardworking" Arabs and Uzbeks))) And how do you like additive 13.09, where do you work in Europe?

@mddenis1 6 ай бұрын

@@skullbeard1339 Finland. I get approximately same as you. I agree that payment is similar, only advantage is very comfortable apartments where you have your own room and that you can explore another country and practice language. But what I get here is minimum, you can much more if you find a direct employer