Tilt Deck Trailer Gets All New Brake Assemblies
Рет қаралды 420
5 ай бұрынThis is how I install new trailer brakes. The existing brakes were packed with grease from the wheel bearings being over greased. I have found it's generally easier to install complete brake assemblies. I go over how I remove, install, wire, and adjust the brakes. I also set the wheel bearing preload.
Amazon affiliate link to product used in this video:
amzn.to/3SMCZCx Brake assemblies
@Oldtech51 5 ай бұрын
Bearings must have .001" to .005" end play. Not my opinion, just fact.
@Oldtech51 5 ай бұрын
Lazy Lube strikes again. Not for repacking bearings.
@TimTurner115 5 ай бұрын
Thank you sir. You make it look easy. Question. Did you replace the seals?
@rustedroostershop 5 ай бұрын
I ordered new seals but received a box of tail lights instead of seals. I've got the new seals now. Thanks for watching.
@TimTurner115 5 ай бұрын
@@rustedroostershop think you air
Interstate Adventures
Рет қаралды 49 М.
TheSoul Music Jam
Рет қаралды 23 МЛН
Home Built Workshop
Рет қаралды 36 М.
Nate’s Place
Рет қаралды 13 М.
NTD Racing
Рет қаралды 32 М.
My RV Works, Inc.
Рет қаралды 611 М.
兔子警官
Рет қаралды 2,8 МЛН