This Added a TON of Counter Space | Hardwood Kitchen Island

Рет қаралды 29,865

Күн бұрын

In today’s video, I'll show you how to build a modern kitchen island. I made this kitchen island to fit comfortably in the center of the kitchen and to maximize counter space. The table is built from walnut hardwood and uses traditional mortise and tenon joinery along with other traditional joinery techniques. I added two large drawers and a slatted lower shelf to take advantage of its footprint and include easily accessible extra storage. The simple modern design makes an excellent centerpiece for any kitchen upgrade.
▸ SUBSCRIBE! bit.ly/3msp0Su
▸ Patreon: / timberbiscuit
▸ Plan: bit.ly/KitchenIslandPlan
// FOLLOW
▸ Follow me on Instagram: / timberbiscuitwoodwork
▸ Follow me on TikTok: / timberbiscuitwoodworks
▸ Follow me on Facebook: / timberbiscuit
▸ Website: timberbiscuitwoodworks.com
▸ Etsy: www.etsy.com/shop/TimberBiscuit
Items I Used:
Titebond dark - amzn.to/3DPRJIv
Blum Drawer Slides - amzn.to/3qt56uV
Blum Drawer Slid jig - amzn.to/447efY3
Rubio Monocoat - amzn.to/47t6Dld
If you're looking for something else just drop me a comment
0:00 Project Goals
1:20 Top and Legs
5:37 Mortise and Tenon Joinery
8:13 Upper Cabinet
11:22 Upper Cabinet Joinery
14:46 Dados
17:37 Slatted Shelf
21:34 Edge Treatments
24:07 Glue Ups
25:06 Drawer Fonts
26:15 Finish
27:03 Drawers and Reveal
Music by Epidemic Sound
#woodworking #kitchenisland

Пікірлер: 159

@TimberBiscuitWoodworks 10 ай бұрын

▸ SUBSCRIBE! bit.ly/3msp0Su ▸ Patreon: www.patreon.com/timberbiscuit ▸ Plan: bit.ly/KitchenIslandPlan

@dobystrock9404 10 ай бұрын

Yes plans please! This would look great in my kitchen, though I might have to practice up on my mortise and tenon joinery, yours are so clean.

@TimberBiscuitWoodworks 10 ай бұрын

Thanks man! Don't practice too much though, just go for it. 😉

@educatedrobotconsumer7219 8 ай бұрын

Man Shane, all your videos are so informative. I really appreciate the effort you put into the presentation and the detailed advise. My knowledge cache is growing with every video.

@TimberBiscuitWoodworks 8 ай бұрын

Heck yeah, I’m happy to hear that! Thank you for watching.

@brentprosser7293 10 ай бұрын

This looks like a great place to put the most desirable kitchen appliance......................a hot plate. Or, you could use it for the most holy of all kitchen appliances....you know....the deep friar.

@TimberBiscuitWoodworks 10 ай бұрын

Haha! Well played sir, well played.

@ericdeguilo1181 9 ай бұрын

Love it, great job!! Terrible jokes, would watch again. Def put up plans, it’s awesome!!

@TimberBiscuitWoodworks 9 ай бұрын

Thanks man! Glad you enjoyed it! The plans are here if you’re interested: bit.ly/KitchenIslandPlan

@StileandRailWoodworking 10 ай бұрын

Not only are your pieces beautiful and interesting, you also have some of the best commentary of youtube woodworkers. Always fun to watch.

@TimberBiscuitWoodworks 10 ай бұрын

Wow thank you, I really appreciate it.

@ping170 10 ай бұрын

It's either a stopped dado or a mortise and double bastard tenon 😋 Main point is: it works 👍

@TimberBiscuitWoodworks 10 ай бұрын

Haha indeed, cheers!

@davidgiesfeldt6650 10 ай бұрын

Stopped dado…no shoulder cuts. First time watching, very well done, oh and JOKES!

@TimberBiscuitWoodworks 9 ай бұрын

I’m with ya! Glad you enjoyed it, and welcome back to the channel.

@brianhall9019 9 ай бұрын

A captured perpendicular groove.

@TimberBiscuitWoodworks 9 ай бұрын

Ooo I really like that one. I might have to borrow that for a future video.

@brianhall9019 9 ай бұрын

@@TimberBiscuitWoodworks absolutely my friend. I really enjoy your woodworking and definitely your humor. Keep up the great work!

@TimberBiscuitWoodworks 9 ай бұрын

Thank you, I'll do my best!

@wut255 9 ай бұрын

I was just drawing up plans for something very similar. Love the mortises versus pocket holing everything to death. Clean and professional. The only thing I'm dreading is the glue up. 🤞

@TimberBiscuitWoodworks 9 ай бұрын

Awesome! Yeah, the joinery is super tight making the glue up quite a challenge.

@nathansilver9190 9 ай бұрын

Mortise and tenon. You had me at first glance, I thought " no you buffoon, it's a stopped dado......then I saw it was in the middle of the panel ......buffoon.

@TimberBiscuitWoodworks 9 ай бұрын

It’s a tricky one!

@WNCworks 10 ай бұрын

Stortice and Tenadoe!

@TimberBiscuitWoodworks 10 ай бұрын

Haha, oh man, that just might be the winner.

@howieblack8958 10 ай бұрын

Stopped dado. Dude, you’re killing it! The jokes, the video work, the design, and the of course the woodworking are all so high end. Please keep sharing and I’d love to buy some plans for this project.

@TimberBiscuitWoodworks 10 ай бұрын

I really appreciate it, and thanks for watching!

@kevinb6102 10 ай бұрын

It must be my weekend immune system 😂

@TimberBiscuitWoodworks 10 ай бұрын

Haha, that's one of my favorites.

@Zamboni-0805 10 ай бұрын

His jokes are not even funny, you must live a real boring life.

@howieblack8958 10 ай бұрын

@@Zamboni-0805says the guy trolling comments online. 😂🤣

@Milosz_Sosnowski 10 ай бұрын

It's a Timber Biscuit joint 😄

@TimberBiscuitWoodworks 10 ай бұрын

Haha that is is!

@AngieWilliamsDesigns Ай бұрын

This looks amazing. Great project. Great video.

@TimberBiscuitWoodworks Ай бұрын

Thanks so much! Glad you enjoyed it.

@rajrooplal7595 10 ай бұрын

Wow, now that's a "MASTER NUT". Love it

@TimberBiscuitWoodworks 10 ай бұрын

Let's just hope this nut never cracks. Thank you!

@ChristIsLord229 8 ай бұрын

20 years ago my grandpa made a butcher block/island almost identical to this, only with maple and an edge grain cutting board for the top. Its in my kitchen today. Oh and he did it all with a ShopSmith.

@TimberBiscuitWoodworks 8 ай бұрын

That’s awesome!

@jimrosson6702 10 ай бұрын

Stop Dado . Another amazing piece of work you never disappoint in your videos also love your jokes keep up the great work

@TimberBiscuitWoodworks 10 ай бұрын

Thank so much! You’re constantly leaving feedback, and I greatly appreciate your support.

@FallofanEmpireBand 10 ай бұрын

Stopped dado. Because of the length. I think of M&T as being deeper and shorter. Recently added you to my woodworking channels. Top tier content.

@TimberBiscuitWoodworks 10 ай бұрын

I agree. And thank you, glad to make the cut!

@matthysloedolff 10 ай бұрын

I'd say that's a stop mortice, clearly. Great piece, Shane! Looks really good. One thing I've noticed about your videos is that even though they sometimes may be on the long end (20min+), they certainly don't feel long when I watch them. It's a skill few people can master I feel.

@TimberBiscuitWoodworks 10 ай бұрын

Clearly! Haha! Thank you man, it’s sometimes a grind to try to get the right pacing, but I’m happy to hear it’s working. Thanks again for your support.

@jean-lucdesselle-mm3mv 10 ай бұрын

Plans for sure!!! Exactly what I need to build!

@TimberBiscuitWoodworks 10 ай бұрын

Heck ya! I'll let you know if I end up making them.

@andersonolive4553 10 ай бұрын

Your builds are beautiful dude and I love seeing your tool set up. Gives me a lot to look forward to. The commentary is spot on as always haha. Thanks for sharing your content. Glad to have your work available on here.

@TimberBiscuitWoodworks 10 ай бұрын

Thank you so much! It's comments like yours that keep me sawing away in the shop. I'm thrilled that you enjoy the builds and shop setup - I hope I can continue to inspire your woodworking journey.

@5280Woodworking 10 ай бұрын

Panel dado. Well done, really liked the overall design/style.

@TimberBiscuitWoodworks 10 ай бұрын

Thank you very much!

@andrewbrown8148 10 ай бұрын

Wow, that's a beautiful piece~! Will have to build one of these for my son & daughter-in-law...the newlyweds~!

@TimberBiscuitWoodworks 10 ай бұрын

Thank you! And congratulations to you and your family!

@TimberBiscuitWoodworks 10 ай бұрын

The plan is live! bit.ly/KitchenIslandPlan

@moneymakingmikeg.9555 10 ай бұрын

Yo Shane!! The dark drawer devider & the knot on the drawer face are my 2 FAVORITE features on this piece!! Great job as always Bud!! Hoping all is well, Dirty Jersey out!!

@TimberBiscuitWoodworks 10 ай бұрын

Thank you man! Yeah, the drawer fronts add a ton of character to this one. She fancy.

@philgray4780 10 ай бұрын

Absolutely beautiful

@TimberBiscuitWoodworks 10 ай бұрын

Thank you so much!

@AndyLee-rc8wx 10 ай бұрын

Mortise and dado joint! This is an awesome project buddy. I love how you approached every detail and I would love to purchase a plan. The jokes are on point too, eff the haters man. 👊

@TimberBiscuitWoodworks 10 ай бұрын

Haha, thanks and always!

@alans1816 10 ай бұрын

Nice work, and excellent product. Repetitive processes can become dangerous. I'm not so sure I'd call them redundant. But I would call stopped dados that.

@TimberBiscuitWoodworks 10 ай бұрын

That’s true, thanks man! I’m glad you enjoyed it.

@kevinb6102 10 ай бұрын

Dude that is awesome!!

@TimberBiscuitWoodworks 10 ай бұрын

Glad you think so!

@dpmeyer4867 9 ай бұрын

nice work

@TimberBiscuitWoodworks 9 ай бұрын

Thank you!

@MASI_forging 10 ай бұрын

Absolutely beautiful 👏👏

@TimberBiscuitWoodworks 10 ай бұрын

Thank you!

@andyporter3640 10 ай бұрын

Plans would be great. My wife loved the look of this and wants me to build one for our computer room

@TimberBiscuitWoodworks 10 ай бұрын

I'm still gauging interest to see if it's worth creating plans. But the pressure's on now that I know it's a family request! 😄 I'll definitely keep you updated if I decide to release the plans.

@TimberBiscuitWoodworks 10 ай бұрын

Here it is! bit.ly/KitchenIslandPlan

@acijami 10 ай бұрын

It's a mathematical stop mortise dado!

@TimberBiscuitWoodworks 10 ай бұрын

I like it!

@barryvenditti614 7 ай бұрын

Your work is so damn beautiful. Thanks for your wonderful videos.

@TimberBiscuitWoodworks 7 ай бұрын

Thanks man! Happy to make them.

@bigwillysgarage2301 10 ай бұрын

Dadotennon , beautiful piece my man!! How long did this project take sir ? Ruff time minus filming so u think ?

@TimberBiscuitWoodworks 10 ай бұрын

Thank you! This one was about 40 hours give or take.

@mattelias721 10 ай бұрын

Stopped mortise dado tenon...? Who knows. One of my favorite sayings is, if it's stupid but it works then it's not stupid. Great execution - that's solid and top-notch. I think the only suggestion I could possibly make is to soak the feet end grain with epoxy to prevent any spilled water (busted pipe, inattentive kids, etc.) from soaking up into the island. Just a thought, and picky, but I build my stuff to survive the zombie apocalypse.

@TimberBiscuitWoodworks 10 ай бұрын

Haha! No doubt, I've done that for outdoor furniture but not for indoor stuff. I hadn't considered that might be an issue but I agree, it wouldn't hurt.

@ekochman17 10 ай бұрын

Stopped dado. Gorgeous work!

@TimberBiscuitWoodworks 10 ай бұрын

I'm leaning that way too. Thank so much!

@JonathonPickett 6 ай бұрын

Your jokes are hilarious! 😂

@TimberBiscuitWoodworks 6 ай бұрын

Nothing beats a good dad joke. Except maybe a son joke, he’s been heating up.

@StileandRailWoodworking 10 ай бұрын

Long mortise and tenon

@TimberBiscuitWoodworks 10 ай бұрын

I think technically that is correct!

@Bernardgrubb 5 ай бұрын

dato how about a sliding dovetail, that would be fun...

@TimberBiscuitWoodworks 5 ай бұрын

Yeah a sliding dovetail would be great

@davidgiesfeldt6650 10 ай бұрын

What I tell my students: “There are no accident, you are either not doing what you should or doing something you shouldn’t “

@TimberBiscuitWoodworks 9 ай бұрын

This is the way.

@szeredaiakos 9 ай бұрын

There are a couple of dado stacks already approved in the EU. The Italian CMT stack is a good one.

@TimberBiscuitWoodworks 9 ай бұрын

I wasn’t aware of that, thanks for the heads up!

@szeredaiakos 9 ай бұрын

@@TimberBiscuitWoodworks It's a new thing. Most people aren't. But you can still have someone to buy it outside EU and ship it to you. Just like with any other thing our beloved tyrants don't approve of.

@TimberBiscuitWoodworks 9 ай бұрын

Haha, true.

@indyfastal 10 ай бұрын

It's a ninja joint, you know something's there, but you'll never see it...🤣

@TimberBiscuitWoodworks 10 ай бұрын

Haha, you deserve a hi-ya five for that one!

@zachc1 10 ай бұрын

Stop dado for sure

@TimberBiscuitWoodworks 10 ай бұрын

I’m team stopped dado as well

@adambrink4475 10 ай бұрын

Mortise and tenon 18:17

@TimberBiscuitWoodworks 10 ай бұрын

The mortise and tenon team is catching up.

@madcapsportsgarage9761 10 ай бұрын

Mortis and tenon.

@TimberBiscuitWoodworks 10 ай бұрын

I think technically, you’re correct

@Mike222554 10 ай бұрын

Plans yes

@TimberBiscuitWoodworks 10 ай бұрын

I'm tallying them all up!

@TimberBiscuitWoodworks 10 ай бұрын

Here it is! bit.ly/KitchenIslandPlan

@anch1994 10 ай бұрын

You don't often hear someone mention a Gantt chart in a woodworking video. What do you do for work?

@TimberBiscuitWoodworks 10 ай бұрын

Haha, I suppose you’re right, I work in advertising in my day job.

@huntermedea8536 5 ай бұрын

Hi , great content. NOticed you dont really bother about glue dripping on your clamps , how do ou clean them ? i keep taping mines but its pain in the a...

@TimberBiscuitWoodworks 5 ай бұрын

Thanks man glad you enjoyed it! Sometimes I put tape down, but I just clean them off with vinegar when they get bad.

@WorkshopGreg 10 ай бұрын

Lap joint, maybe?

@TimberBiscuitWoodworks 10 ай бұрын

Nice!

@chriswestrick 10 ай бұрын

Bueller joint…it’s like it’s not even there.

@TimberBiscuitWoodworks 10 ай бұрын

Haha, if you don't stop and look around once in a while, you could miss it.

@garynicoletti7182 10 ай бұрын

I would like to know what Festool Sanders you own and why did you choose the specific model(s) you own?

@TimberBiscuitWoodworks 10 ай бұрын

I have the ets 125 and 150/5 I like the 125 for smaller projects and the 150 for larger ones as it has much more surface area and removes a lot of material more quickly.

@nathangeringer9147 10 ай бұрын

Perpindicular terminated tongue and groove.

@TimberBiscuitWoodworks 10 ай бұрын

Haha, it just rolls of the tongue.

@stanmcdonald201 10 ай бұрын

Stopped dado. What’s the “pencil” with the white color that you use on the walnut?

@TimberBiscuitWoodworks 10 ай бұрын

That's a pica, heres a link to the one I use: amzn.to/3sbgeNL

@wyliewoodco 10 ай бұрын

Just curious how that top is gonna be able to move seasonally.

@TimberBiscuitWoodworks 10 ай бұрын

Honestly it shouldn't move a ton the lumber was kiln dried but there is a small amount of space front to back in the mortises.

@nmfam 10 ай бұрын

I stay for the humor

@TimberBiscuitWoodworks 10 ай бұрын

Like glue, a little goes a long way 😉

@Bernardgrubb 5 ай бұрын

what were the dimensions for that island?

@TimberBiscuitWoodworks 5 ай бұрын

The finished size for the Kitchen Island is 25” w x 44” l x 36” h

@anthonymendoza8485 10 ай бұрын

Nice peice and build...T>

@TimberBiscuitWoodworks 10 ай бұрын

Thank you! Cheers!

@derekwilliams2984 10 ай бұрын

Sir how can I get the plans for this build?

@TimberBiscuitWoodworks 10 ай бұрын

I don’t have them done quite yet but I’ll let you know if I decide to publish a plan.

@TimberBiscuitWoodworks 10 ай бұрын

Here it is! bit.ly/KitchenIslandPlan

@derekwilliams2984 10 ай бұрын

Thank you

@howieblack8958 10 ай бұрын

@@derekwilliams2984 not a problem. Let me know if you have any questions! Cheers

@rmwoodcraftllc 10 ай бұрын

Mortise and tendon. If the male piece has a shoulder I would say M&T, if not, dado...that's my opinion anyway

@TimberBiscuitWoodworks 10 ай бұрын

I feel like this is the technically correct answer.

@slunk007 10 ай бұрын

I subbed just for the puns.

@TimberBiscuitWoodworks 10 ай бұрын

Nailed it!

@groverprice4755 10 ай бұрын

Nice piece, however, I noticed a major flaw in this video. You seem to be a very confused sports fan, I noticed the Mets shirt and then the Eagles sticker on your drill press. I don’t think it’s possible to be both a Philadelphia and NY fan. 😂 (written by a life long Philadelphia sports fan)

@TimberBiscuitWoodworks 10 ай бұрын

Haha! You know, you’re not wrong. Unfortunately, I grew up in Virginia Beach and we don’t really have a franchise here. So, I’m a Mets fan because my father is, and an Eagles fan because he loves the Cowboys. I had to shake things up around the Holiday seasons haha.

@groverprice4755 10 ай бұрын

@@TimberBiscuitWoodworks well I gotta respect the Dallas cowboy troll.

@TinyWorkshop 10 ай бұрын

stop tenon 😆

@TimberBiscuitWoodworks 10 ай бұрын

Six of one half dozen of the other... I like it!

@vickymcbride9042 10 ай бұрын

Stop dado

@TimberBiscuitWoodworks 10 ай бұрын

I think that's at about 75% right now

@RobertMason 10 ай бұрын

Stop Dado all the way. Technically yeah, mortise and tennon, but no.... just no... Stopped Dado. Feels waaaay to big to be considered a mortise and tennon. Side note.... gotta say... I love the dad jokes. Pavlovs dog and Schrodingers cat, genius

@TimberBiscuitWoodworks 10 ай бұрын

Nice to find another woodworker who appreciates the nuances of a great dad joke!

@josh_watson 10 ай бұрын

Stopped dado for me. Mortise and tenon just feels weird to say in this application.

@TimberBiscuitWoodworks 10 ай бұрын

No doubt!

@craigjones5756 10 ай бұрын

Stopped dado

@TimberBiscuitWoodworks 10 ай бұрын

I’m with ya!

@stevehoffman3341 9 ай бұрын

the finished piece is beautiful, but IMO your design does not allow for wood movement, and the cross grain situations will tear itself apart after a couple seasons.

@TimberBiscuitWoodworks 9 ай бұрын

I’ve shared this in another comment but here’s the gist for the for the expansion issue you’re describing. The alignment of the radial and longitudinal grain in the mortise was chosen to balance aesthetics, strength, and wood movement. While alternatives like double stub tenons or figure 8 fasteners could be used, this design aligns with my vision for the piece and takes into consideration the expansion and contraction of the wood. So while I do understand your concern there is space for wood movement built into the joinery and that was heavily considered during the design process.

@crude75 2 ай бұрын

sometimes I forget that people have different sense of humor, because to me his "jokes" are absolutely awful but yet some people find them funny

@TimberBiscuitWoodworks 2 ай бұрын

Sounds like you’ve had a real break through. I’d say I’m proud of you but that would be a pretty awful joke too. So instead I’ll just say may your sense of humor find its perfect match, like socks lost in the dryer. Here’s to the jokes that land and those that fly over your head.

@timcassidy9619 10 ай бұрын

Your jokes are pretty lousy, but I like your work.

@TimberBiscuitWoodworks 10 ай бұрын

Haha, glad you're not board with my woodworking, even if my jokes don't always cut it.

@Zamboni-0805 10 ай бұрын

Turned out nice, really liked it. What I didn't like is your corny jokes. A joke here and there okay, but seems like you try hard to throw in as many jokes as you can ....and they are not even funny!

@TimberBiscuitWoodworks 10 ай бұрын

Thanks! It's okay to say you didn't get them. Like the woodwork, I'll try to nail em next time.