By far the best fabrication videos on youtube by far and your attention to detail is freaking unbelevable its always the lil things that make your masterpeaces what they are with no cutting corners and with nothing half ass put together evrything very clean and very tight. You cant help but to admire your work and craftsmanship through out the entire build all the way to the paint details. I am really not into drag racing but like a said wen you have that passion and hold your standards to that level you cant help but to apriciate what ever line of work it is you do. I also fabricate and your line of work is very simular to off road racing fabrication very simular through the hole cage and tin work pluming and even suspension to a certain point i guess that arms would be a bit longer and mounted more to the center of the frame down to the four link set up and heims evreyrhing just a bit bigger down even to the sway bars very very simular stuff or i dont know if its just me but thats the reason i could not stop watching your videos till i watched them ALL in one night . Once again great job like i said i dont know shit about drag racing and i cant imagine thers too many other builders putting out race cars at that level or better then yours i think you set the standards pretty high and im sure the big dogs are running with your equipment

Hi. Thank you. Karl

I love your cars and vids tim thank you for what u do I only hope I can build something that can compete with ur stuff from Vancouver bc Canada

Thanks for sharing

Good but good jobs .never in the live Si tis explein old that une chasis builder du in one jobs .Thats ipresionant I in teresting old the time .Because y understan the job an Ido meny diferent works .congratulation for your chanel and thanks .

Wouldn’t it be better if the shoots were lower and tucked under the wing to stop the shoots from breaking up the air on the back of the car coming off the wing

Is the aluminum body tube for the parachute anchor bonded to the carbon? In my research I have found that aluminum bonded to carbon will eventually corrode to the point of failure, and so steel or titanium should be used (if an alloy is needed).

Err, it isn't a wing, it's a spoiler. A wing has air passing over top and bottom surfaces.