I was thinking the same thing. This channel gets a video, and the company got free high speed footage. Can't imagine the glass vials cost too much to send.

Well combined Moses. May we call you Sherlock Holmes! ❤❤

Only to see Dan changing multiple variables at once 😂

Exactly what I thought

Good marketing too, everyone sees, it works.

that's very interesting, thanks for sharing

Slow Mo sky dive!

That is cool. Thanks for providing the new thing I learned today.

Do you have to be on fire?

What about explosively partitioned seatbelts?

The "blobs" of metal you speak of are actually ions I believe. You wouldn't be able to see them moving - it would just look like a bright light. That said the deposition on the target material would be very interesting.

@@meoshcam5930 nope.

Edit: So I was completely wrong. matthew phillips farther down this thread actually posted a video of exactly that, highly recommend it! I imagine it would be either extremely difficult or not possible for them to film that. The light from a welding arc is absolutely too bright and would overwhelm the camera sensor

@@ericeaton2386not necessarily there’s is filters and overall with the speed of the camera the brightness decrease

And how fast do you think a arc "moves"? Just around lightspeed, yes? Answers the question i think.

And the fact that the list says ding at 10 minutes, which shows up on the screen at exactly 10 minutes.

wasnt expecting to see you here! 👍

@@Moondragon1821 ur right i missed it lol

Yoo, didn't think to see you here, love your portal content!

But the dmd would be so cool. Maybe film it with a macro lens.

Would be very cool to see in motion, but the feature size on the DMD is so small that you won't see any detail with a regular high speed camera. Last time I looked at a MEMS device that had a similar feature size to a DMD, I needed a scanning electron microscope to see anything in detail. Luckily, I had access to one. However, to my knowledge, there is no such thing as an SEM that can produce more than 2 frames per second, and the resolution is very poor at those speeds. Typically, an SEM takes 5 or so seconds to produce a single frame. A macro lens simply would not do the job, I don't think any visible light imaging device could do it, save for maybe some multi million dollar microscope in a lab somewhere.

You can't filter other colors out of a single color laser, and I'm not aware of any way of changing the wavelength of light without a bunch of arcane optics.

@@tyttuutI agree with you, you can’t change laser light colour easily

@@tyttuut The OP is incorrect in that DLP projectors use a bulb, not a laser, and only one spinning wheel. I've taken plenty of them apart in the past, to clean the optical path (particularly the colour wheel).

77 is my favorite number so instead of liking it I comment that I agree with you and i'd add that the ''slowing'' sound make an appearance in the KZfaq rewind before they came in person in the one the next year and I find it really good

Yeah, Gav's sound design is always top notch.

Years of thinking the sounds was in slow motion ruined.

@@cryluneI don’t think Gav’s the one that does it, can’t remember who it is though

it's often very very difficult to get a decent look because of just HOW bright it is, because it can ruin something as sensitive as the Phantoms. It really would be a balance of quality of shot and quality of content.

@Daniel Northway It would just have to be done through a welding helmet filter lens. Should look fine as long as you get the right dark/lightness.

@@d3north don't tell him how to live his life

@@d3north We can suggest the what. I'd leave it to the experts to ponder the how.

There is plenty of slow motion footage of welding already. But you can't really see all that much. The real trick would be to figure out how to shoot a cross sectional view to actually see what is happening in the welding area and not just at the surface.

Exactly why they sent it to them! Haha

@@HiddenWindshield k

Does EDC stand for explosive direct contact?

Throw them on the ground like a magician's smoke bombs

@@DontReadMyProfilePicture.3 okay

And in the ‘list of things we’ve heard of’ it says ‘ding sound at exactly 10 minutes’

@@oscarramage95🤯

I guess if you're pushing the trigger after the bang in EOD something's gone very wrong.

*_Also Dan:_* Has shot a gun many times for various videos over the years... 😏

Idk I feel like that makes it make MORE sense, not less...

and now he doesn't like pushing triggers.

I smell PTSD.

nice

good

Fine

Nice

Nice

@Don't Read My Profile Picture Literally bot spam, comments all over everywhere.

nah i really would enjoy them to do like 2 vids a month at least !

I wouldn’t say they get stale but it definitely keeps the hype up for when they do post. They used to post a lot more often and it was never stale.

I think it’s just because the idea makes the video for them, instead of the video making the idea (and they aren’t in a rush).

@@saddlebag Also because they live different sides of the Atlantic Ocean.

You may be right! Sneaky capitalists.

I just wanna know what causes the bang sound in party poppers

​@@brandonegan523 A party popper contain an explosive charge that produces compressed air in order to expel the streamers contained inside. The loud popping noise is the explosion going off. The explosive (typically Armstrong's mixture) is a highly sensitive friction-actuated explosive that detonates from the friction produced when you pull the string on the popper

I'm assuming that the conductive shell wobbled in and out of contact with the full circuit before completely coming apart?

@@LeonardMeltsner Or maybe the fluid is conductive.

It probably did that in the other shot but it just wasn't slow enough to see.

@@G-Forces i've checked solution used in this extinguisher is liquid called Novec (aka "waterless water") and CO2. Both are dielectric... duh! It would be very strange to use conductive liquids to put out fire in electronics.

@@LeonardMeltsner last blinks are happening, when shell is long (slowmo scale long) gone. And video isn't THAT much slower than first ones, where lights were just cut out. I'm intrigued by this flickering.

I mean, if you're going to take that literally you need hands the size of Shaq to grasp just one in your hand, so I don't think "a handful of a fire extinguishers" will ever catch on as a unit of measurement

sawstops yeah but arent they like one time use?

@@ivarsdredzels231 The cartridge is, but you can replace them pretty easily so they could get a few shots.

@@skylerlehmkuhl135 pretty easily? last time I heard they were around $3000 dollars to replace

@@branimirgacina4 Nonsense. Less than $100 plus the cost of the blade.

@@Perceptence or when you forgot you had it and go to cut a sheet of aluminum

Destin on smarter every day has!

Well the two do correlate, generally after you eat at the king you get your own throne to sit on.

@@DontReadMyProfilePicture.3 don't care 🤡

@@FLEXTORGAMINGERA Don't reply to bots. It makes the comment look more legit to the KZfaq algorithm, and leaves a link to their page in your reply. Just report and move on.

That was aweosme

What a great game, think I still have a copy of it tucked away in a bin somewhere 😆

I know, the list was the best Easteregg, maybe I shall have to go get them a $2 bill and send it just for fun :)

Sadly it isnt possible to record welding arcs, its just too bright they would need a phantom that could do light speed lol

ok

​@@verakoo6187 Use a filter made of welding mask material, maybe; those can keep eyes safe and human eyes need LESS illumination than a phantom going at max speed. In addition, it's possible to configure a phantom to be surprisingly insensitive.

Epic AF (autofocus)

Did you see the one (during pandemic lock down) of who the apple watch spits out water? That was a just Gav but was pretty freaky/fun!

Similarly mundane: making a cup of tea or a bit more exciting: breaking a glow stick.

@Don't Read My Profile Picture You're no better than a spam bot account. Go away.

Don't worry we won't read your name or click on your profile.

@@Stephan-H oooh. breaking a glowstick would be neat!

Ding!

I agree that would be awesome! Only one slight problem is that planes are a tad expensive. Perhaps a collab with somebody who can make a scale model?

@@Name-qj9ql Would the entire plane be needed for the video though ?

@@psirvent8 I mean no, but at the same time do they make any plane seats that don't go into a plane?

@@Name-qj9ql Maybe they replace them periodically (Like fire extinguishers in buildings, or escape slides on airliners for instance), in that case it would simply be a matter of finding a discarded seat.

The promotional material says that "The fire is detected at the origin and the fire is automatically extinguished. The power is permanently cut off to prevent re-ignition[...]" The tubes seem to have specific current limits (up to 16A), but nowhere does it say what happens if you exceed it or if you can use it as a regular fuse. Personally, I'm not sure if i want my over-current protection to release noxious gas when triggered, so having it in series with a regular fuse as a thermal fuse is probably the idea here.

Dan is an actual explosives expert.

the list also says: "Ding sound at exactly 10 mins" while there is a ding at the 10 minute mark

That would have been exceedingly useful for him to learn *before* he dug a tunnel to Texas 😂

@@blobfish. Obviously he learned it sometime after the tunnel. Lol

dam. official youtube comment with only two likes

Hi youtube

@@schroschbrot4418 now it has 3 likes

Lol 0 seconds ago