This mower is a beast !! Kubota f3060

No video

This mower is a beast !! Kubota f3060

Рет қаралды 15,337

Күн бұрын

A video showing my kubota f3060 front deck mower. this machine has been a handy tool tool for our property.
thanks for watching

Пікірлер: 50

@nospam3409 Жыл бұрын

I love my F2880. Im 6'2" and it is by far the most comfortable machine ive ever been on. Most likely you have some bearings that are worn in that rear diff. Id recommend going through it asap if the parts are still available. Mine was a city machine also and I had similar issues. Lots of play in the rear end. Cost me about $800 to rebuild everything which included taking one section to the dealership because i wasn't comfortable tearing it down quite that far. In the late 90s I was using an F2100 to Mow about 40 actual acres per week. I mowed 4 days and did maintenance on the machine on the 5th day. Another guy mowed 4 remot locations. Sometimes i helped him on the fith day, otherwise i did maintenance on his machine as well. They are absolute beasts. I ran right square into an elevated manhole cover one afternoon while mowing at full speed. Brought the machine to a complete stand still, cracked the manhole cover, didn’t even dent the deck. Barely scratched the paint. Just dont get them stuck in the mud. That's no bueno....

@michaelmactavish4445 Жыл бұрын

thats not bad $800 for whole rebuild its about $5,900 at deeres wich rediculas

@nospam3409 Жыл бұрын

@michaelmactavish4445 to be clear, it was bearings and seals. The gears were fine. I replaced most of them on my own. I don't remember the specifics now, but the right side had a bearing that I wasn't comfortable getting to with the tools I have at home. I was able to put the partially dissasembled assembly and its components in a box on the floorboard of the car and drive it to the dealership 40 minutes away (cheaper than driving the truck). They had to order the bearing, but $400 later, I had the assembly back in hand assembled with new bearings and ready to bolt back onto the rear axil. If I had let the dealership do the entire repair, the cost would have probably been over $2k.

@michaelmactavish4445 Жыл бұрын

@@nospam3409 thats not bad for parts $400 and kubotas are so much easyier to fix

@nospam3409 Жыл бұрын

@@michaelmactavish4445 Yes, I was pleasantly surprised. Bearings were $30 to $50 ea (USD) from the dealership. Very simple design.

@johnmaclellan2589 Жыл бұрын

I spent 8 years along with 2 other cutters on an older version of this machine. I would not hesitate to say it is the best lawn mower that is out there by far. Excellent choice for a lawnmower.

@jimhofoss9982 Жыл бұрын

that’s a great mower! I pull around battery powered mowers, ganged together, with an electric bike I made. grass gets mowed by solar, since all the batteries are charged by the solar system, lol. I dare say, your mower is just a tad faster🤣

@michaelmactavish4445 Жыл бұрын

them f series makes a great sidewalk machine

@bobveal Жыл бұрын

Love that beautiful mower. Friend of mine has 3 acres and I’ve tried multiple times to get him to purchase a similar model

@d_dizzie_druck5753 2 ай бұрын

I hope they're good mowers, I'm investing in one next week. The one I'm getting is a 2010 Diesel, with 410 hours on it.

@tinmanssaws 2 ай бұрын

I've had this mower for almost 10 years. I've put 800 hours or so on it and rarely have had any breakdowns. It currently has almost 2700hours on it

@ColonialEricSR Жыл бұрын

Nice property tinman I have almost 6 acres and it’s the best having a little land to do stuff on especially cutting wood!

@aaronpowell4885 Жыл бұрын

If i had more property I'd love a mower similar to that one! For now tho my old John deere gt262 serves me well.

@triple6758 2 ай бұрын

I tried to find one of these mowers but ended up with a ZD326 instead (new to me). I have nothing at all bad to say about it 6 years later. It had 800 hours when I got it. It runs like new and cuts nice.

@markpritchard 25 күн бұрын

Yep, i don't think i've ever had anything from new, My tractor is 1953. On the good side, old stuff goes up in value, new stuff goes down in value. So most of my equipment i could sell for more then i paid for it.

@toddpacheco4748 Жыл бұрын

Buckin is always saying great things about you tinman ❤😊

@tinmanssaws Жыл бұрын

He's a good fella that buckin guy

@ericfradenburg754 Жыл бұрын

Now Buckin has to do a mowing video with a Tinman cameo!

@OzarkMidwest Жыл бұрын

Nice video Tinman!! I appreciate ya friend. 7 acres may be brush hog worthy eh

@tinmanssaws Жыл бұрын

Wow thanks, the appreciation is all mine!!

@tdawg8605 Жыл бұрын

Always something to do 😂. TC Mahalo Tinman 🤙🤙🤙

@jeffc9354 Жыл бұрын

Great video tinman ❤❤

@boyfowler6078 Жыл бұрын

Looky, looky, you with that crome socket

@Z-Bart Жыл бұрын

Thanks. Now I feel like I got tics crawling on me. Lol.

@charlesharrison2248 3 ай бұрын

Nice tool,I'm I n in Ireland and I have the same,ex council, full cab .because our climate is so wet I find the grass clogs up underneath the deck, I am wondering if I cur one end off and put a small chute to allow the grass to blow out would it help.i would hinge the end so that it could be closed and locked back when needed.what is your opinion on such a job.

@michelpicton8357 Жыл бұрын

41 thousand subs!!! Ya tin man!!

@FishFind3000 Жыл бұрын

Those cheap home owners mowers aren’t cheap anymore. Covid bumped those prices up. I sold my old mower with 200+ hours for what I bought it for 9 years ago.

@tinmanssaws Жыл бұрын

Up here it's easy to spend 3 to 5 k on a mower for sure.

@AaronTheViking250 Жыл бұрын

definitely cuts nicely. has the fire services mandated that any long grass or shurbs trees have to be within length and height ?. Because out here in bc and the Okanagan we have a fire mandate witch states any long grass shurbs tress gotta trimmed and mowed within a certain height and length on ruel an residential property's so just curious more than anything

@tinmanssaws Жыл бұрын

Na, we rarely get fired bans or anything like that here.

@dand33911 Жыл бұрын

Kubota makes good stuff! I wouldn't trust an orange oil filter on my orange equipment. Not all orange things are good, most, but not all. Ripsaw isnt taking customer saws anymore.

@russbowman6801 Жыл бұрын

Now if they would put a flail mower with hammer type cutters on the drum in front, it would be perfect for field work and lawns. 'That seems to be what I need, a flail mower with hammer cutters in the front. Our lawn if a field, not a finished lawn. I run into smaller tree limbs, ant hills, gravel, high weeds, grass, and saplings trying to invade the property. That kind of mower looks nice on grass but can handle the rough stuff but leave a fair finished look.

@samuelbellingrath 11 ай бұрын

Curious, what year is it? What’d you pay for it? Beautiful mower but a lot of $$$ even for used it seems…

@gerbutt Жыл бұрын

Hello buddy, how are you? Quick question please. I have a husqvarna 61 with fuel flooding out the back of the carb! What do you think could be the problem please?

@hoffmanbmxbikerider Жыл бұрын

What do you think about Opti 2 oil at 70:1 for my chainsaws. Some are ported and some are stock

@davefrayne6468 11 ай бұрын

I have a F2100 with a 60” deck. The F2100 will run forever, however I need a new deck

@tinmanssaws 11 ай бұрын

My uncle has one of those with low hours. It's a great machine for sure.

@nickevans4788 Жыл бұрын

Any tips on modifying the deck so it swings up for cleaning like the newer models ?

@tinmanssaws Жыл бұрын

Not that I know of

@theowiththeo Жыл бұрын

LOL buckin’!

@rugerfarming5387 Жыл бұрын

what Ripsaw did you run. Did you like it. Thanks

@auskip07 Жыл бұрын

that thing should have a chainsaw holder on it.

@leonardryan8723 Жыл бұрын

Fun you don’t have a John Deere in western Canada 🇨🇦. Jeez don’t put gas ⛽️ into it , it’s full diesel Tinman. 2800 hrs not broke in yet , keep the cutting blades sharp . Don’t see your safety jacks remember THINK SAFETY and always put SAFETY FIRST TINMAN. 😊

@tinmanssaws Жыл бұрын

I had a deere once; good mower but i think the kubota is a better machine.