No video
Tips and Tricks - How to Level / Adjust refrigerator height [SUPER EASY]
Рет қаралды 72,997
Күн бұрынThis video will show you tips and tricks pros use to level large appliances such as refrigerators. I will also tell you the process how I go about leveling my refrigerators.
Please subscribe to my channel to see more videos like this.
@mauibeachscapes2274 2 жыл бұрын
Great idea with that crowbar!! Don't know why I didn't think of it. Thanks a whole bunch for this video how-to.
@GAWells-lj7qo 2 жыл бұрын
Really good at 1.5 speed! Thank you heaps for the video DIY GEEK Dude!!! 😘
@jprnb83 2 жыл бұрын
how do you male it go at 1.5 speed
@GAWells-lj7qo 2 жыл бұрын
@@jprnb83 After you have selected the video, or even while it's playing, go down the right side bottom of the video to the settings icon. When you click on the settings icon one of the options that will pop up is the "Playback Speed". Click on Playback Speed. You will then be given several options to make the video play either slower, normal, or faster. Good luck.
@ashleymarie7452 Жыл бұрын
Very relevant, concise and factual. Thanks!
@craighamachek1199 Жыл бұрын
This is really great info for a 4 point leveling system. A lot of videos only address refrigerators with a 2 point leveling system (leveling legs only in the front). My owners manual only provided 4 bullet points on leveling my frig. And other than the wrench and socket sizes were not helpful.
@300zxdriver 4 жыл бұрын
Should it be level front to back? I thought it should be slightly higher in front.
@DIYGEEKTEXAS 4 жыл бұрын
Yes, now that I think about it... it would be beneficial to have the front 'just slightly' higher (to keep the door closed). Thanks for your suggestion!
@carolyoung3444 3 жыл бұрын
It's a sub zero. No screw is designed to turn by hand. Nevertheless，I want to adjust these screws on a sub zero. But the tool just won't fit in the narrow clearance above the vertical screw. Your trick can be one solution. But my fridge is 48', not sure light enough to lift it.
@DIYGEEKTEXAS 3 жыл бұрын
@@carolyoung3444 Thanks for your comment, I bought my sub zero used - I am not sure about the screws not designed to turn by hand... I have always adjusted the front screws by hand, maybe I am doing it wrong all this time?
@budman30k 2 жыл бұрын
Level side to side then up in front a few turns . If you open the door half way and the door closes on it’s own you should be all set
@DIYGEEKTEXAS 2 жыл бұрын
Great tip - Thanks!
@budman30k 2 жыл бұрын
There could be bolts behind the front vent cover those are very easy to adjust
@MorningstarsHappySalvationShow Жыл бұрын
once in neutral position, where do you put pry bar to level--what to get under?
@Chanmantroop10 2 жыл бұрын
Pretty sure the fridge should be screwed into the cabinetry at some point. On the top or sides..... So those should be removed before leveling
@chandrashakarkommaraju1206 2 жыл бұрын
Exllent
@w0lf1969 Жыл бұрын
I try to drop the front of my refrigerator but the front rollers won't let it go down
@DIYGEEKTEXAS Жыл бұрын
Sometime it is the WEIGHT of the refrigerator causing friction on the nut / screw. Try to relieve the weight and spray some WD-40
@w0lf1969 Жыл бұрын
@@DIYGEEKTEXAS the front legs are completely off the floor without the front dropping down. I've tried to use a flat bar to push the rollers up but they won't move. It's only a year old. How far will the rollers actually go up?
@mrdougip 3 жыл бұрын
Thx for the tip! No way to get a tool in there to adjust the legs.
@DIYGEEKTEXAS 3 жыл бұрын
Most refrigerators have hex nut near the front legs which can be used to adjust the rear legs
@cammacgregor9354 3 жыл бұрын
A thin adjustable wrench works
@budman30k 2 жыл бұрын
So if you take off the lower front vent cover and there is a bolt on each side that is the front height adjuster . If there is just a screw holding the plate behind the vent cover you can adjust it with a open end wrench but probably have to get it up in the air a few inches
@ladellp5135 3 жыл бұрын
That is not a cry bar. It's a crowbar.
@cammacgregor9354 3 жыл бұрын
He said PRY bar several times
@ladellp5135 3 жыл бұрын
@@cammacgregor9354 It's still called a crowbar.
@GAWells-lj7qo 2 жыл бұрын
It's a cry bar when I have to use it.
@Bub-belz81 2 жыл бұрын
I think he said pry
@ladellp5135 2 жыл бұрын
@@GAWells-lj7qo Lol😂
Harley Quinn with the Joker
Рет қаралды 13 МЛН
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
Motherland Darren's Sessions
Рет қаралды 3,7 МЛН