Video idea: bolt action ASMR - a 30 minute video of Bloke operating the bolts of various rifles next to a binaural microphone. I don't know if it's just me being weird but the mechanical noises a nice slick bolt action makes are very satisfying.

This is another great video. I teach the Toyota Production System and this video illustrates many of the principles of TPS. “You’re wasting movement, and movement is time.” ~ Bloke On The Range That sounds familiar to me... “Time is the shadow of motion.” ~ Shigeo Shingo I’d say that aiming and pressing the trigger are the only “value-added” elements of shooting a rifle. Every other motion must be minimized or eliminated for efficient (fast) results.

Oh God, as soon as you said “let’s do that in slow time” My memory uncontrollably had Sergeant Major voice in the back of my head bellow out “Parade will march in slow and quick time!” 10 years was too long I think... Plus as Rowan on you commonwealth myths vid said “work the bolt in a soldierly fashion”.

I just recently realized the extraction/ejection problem my M1903A1 Springfield had. For the longest time, the extraction and ejection pattern of my '03 was erratic, varying between works as it should to anemically flinging the case out or to extracting the case out of the chamber and leave it lying on top of the next round. It wasn't until I compared the bolt of my little brother's Type 99 Arisaka to mine did I realize how worn out the claw extractor on my bolt was. The casing wasn't fully held against the bolt-face and during extraction it would often slip out before it hit the ejector blade. I've since put in for a new extractor.

In anatomical terms and for clarity, the bolt knob is grasped in the distal interphalangeal joints of the the pollex and first finger. Plus you will sound like an Anglo-intellectual of the highest order as you operate this fine piece of engineering.

Great video, which I sure wish I had a few years back when I first got my hands on a Lee and was seriously unimpressed by my results. All that "practice" with sticky Mosins was NOT good practice for running a smooth, well maintained Lee. Your ability to shoot both quickly and well with bolt guns has been a big inspiration to myself to not only spend more time with the old classics, but also push myself and the equipment to see just what we're capable of.

My first job at 16 was a stock clerk at Vons(1970) and we were taught no wasted movement. example... Cut the case of canned beans around the top discard the top then pin the case against the shelve with your waist. (now both hands are free) with your left and right hands grab two cans in each hand and put on self (spin labels to the front) repeat 2 more times (case of 12). Then center the empty box at your sternum and rip each corner...done ! One case in less than 10 seconds. You were expected to do 300 cases a night ( 8 hour shift). I watch kids today and I could still out produce three of them at 66 yrs old. No proper training and slow work ethic... Thanks for the great info. I have a 303 and a 308 and I will practice because of you ! cheers

We talk the same about follow through in archery, the shot cycle doesn't end until you can identify the arrow on target. The entire idea is not to be in the habit of breaking your form early. Otherwise you'll start creeping toward dropping the bow arm as a part of the release. We all have some movement as a result of the tension held before the shot as it is, planning to add to it will only make it worse. And for speed, "Never do anything faster than you can do it right." will get you to both fast and precise before you know it.

In the late 70's I had the opportunity to see Co. Jeff Cooper shoot one stage of a pistol match at the Table Mountain Gun Club near Denver. What impressed me most was not his speed per se, but the economy of his movements, I don't think there was a millimeter of wasted movement in his presentation. Your points about muscle memory and not having separate steps but a continuous movement immediately made me think of that day.

If I'm directing a movie, use the palm technique. Palming does look cool when someone's good at it. But what's better, going fast or looking good? Trick question: going fast is looking good!

Just the sort of in-depth training video I needed! I've been practicing with my no4 much more often since finding your channel, merçi beaucoup Bloke

For non-shooters it can be likened to changing gear from 3rd to 2nd. Push, or pull, to the left against the spring and the lever will just move over as it clears the gate.

Economy of movement in practical application. Brilliant demonstration, extremely concise and well delivered.

I recently picked up a No5 and I finally got a chance to take it out the other day, and I tried doing the proper way of thumb and index finger, but after shooting a Vz. 24 and other Mauser styles for so long it feels natural to palm it, but this was a good video for pointing out the actual technique, not just flying by the seat of my pants

A really good analogy of shooting a bolt gun fast. And now to take what I've learned and go to the range thank you.

Nice and very useful video as usual. I like the comments on S&B it conforts my own opinion after a few problems with them on my k98k, while ppu works just fine. Can't wait for the range to open again over here to finally try my n4. Merci encore👍

Thanks for posting this. I've been getting a little sloppy with my Ruger Scout Rifle so the next time I'm on the range, I'll be trying some of this.

Great vid, Bloke. Despite its obsolescence a properly run bolt gun can save one's hide...and anything that goes bang is better than fingernails!

Well, I learned a few things. Re always running the action after especially after a poor shot is just like I've been taught to run a pump action shotgun.

I 1st read about the British Army's phenomenal rate of fire in WW1 about a year ago. After that I would wonder about the technique every time I would pick up 1 of my bolt actions. Thank you very much for providing such a thorough and detailed lesson.

Great video, Lee-Enfields really are made for speed, now at least I have much better understanding of how to work towards that

great vid, given me some things to work on

Just got a .303 added to my FAC so getting a SMLEIIII soon cant wait!

Good info, will try this next time I'm out with my bolt rifle(s). I've probably been guilty of the palm technique too often in the past.

The tikka arctic is such a cool rifle

Thank you so much for this! In regards to palming a rifle with a straight bolt handle such as a Mosin Nagant. I recently saw some Soviet footage from WW2 where an infantryman fired, dropped the rifle from the shoulder, palmed the bolt, and re-shoulders it for the next shot. Point being it was interesting how fast and efficient it was for that specific system.

IIRC correctly the British Army manual(s) concerning the use of the Lee Enfield actually state that when you close the bolt on an empty rifle, to press the trigger to de-cock it. So dry firing was something which was anticipated and actually advised as best practice when handling the rifle. As Bloke correctly points out, service rifles like the Lee Enfield are designed to be robust and withstand a lot of use and at times, abuse from soldiers. They are, to quote the late Richard Holmes, 'squaddie proof'.

Looking forward to getting into shooting as soon as licence getting is a thing that's possible again (here in victoria Australia), very helpful video. Was really hoping to join your patreon this year but unfortunately the pandemic has made that not particularly possible

ਮਾਈਕ ਵੀਰੇ ਸ਼ਾਨਦਾਰ ਰਾਈਫਲ ਹੈ ਇਹ ਰੀ ਇੰਨਫੀਲਡ 3o3 ਅਤੇ ਤੁਸੀਂ ਇਸ ਯੁੱਗ ਵਿੱਚ ਇਸ ਹਥਿਆਰਾਂ ਦੇ ਮਹਾਂਰਥੀ ਹੋ ਤੁਹਾਡੀਆਂ ਸਾਰੀਆਂ ਜਾਣਕਾਰੀ ਭਰਭੂਰ ਵੀਡੀਓ ਲਈ ਧੰਨਵਾਦ ਜੀ

Thanks Bloke :)

Gday mate finally some 303 content!!! 😂😂🇦🇺👍🏿👍🏿

"I don't like dry firing".... so lets crack some rounds off in the house, NICE. Cheers for the vid.

I shot 4 rds on a running buck and made a connection on the final shot. It's a useful skill.

Great video, I have a Lithgow crossover signature series which only has a 65 degree throw so will be interesting how much this help my follow up shots

im enjoying your rather informative videos, well done and i must admit the franken rifle is growing on me.. mite buile something rather similar for my self. keep up the good works! any new videos of the entertaining aussie?

This is another very information-packed video that will get multiple views from many watchers. The Bloke doesn't nanner on, but delivers valuable, practical mixes of historical and hands-on knowledge at 'mad minute' speed! Bravo! May I humbly suggest a video focusing on stripper clip(charger!) technique, preferably in your most amusing 'Strip Club' format! God bless you, lad. Keep your 'Mad Minutes' of entertaining information blasting downrange!

I'll be sure to take these tips to heart when shooting the only thing I'm allowed to own. An air rifle .. Kill me

I recently got a bass guitar after years of not having and prior stint of a jazz/orchestra/session/theater bassist. My wife who never seen me play was shocked how fast it came back to me. I handed her the bass and she could even hold correctly, i then started trying to show her stuff but just could not even explain what to do

Nice, thanks for sharing.

Nice vid

I grasp my No 4 Bolt exactly the same way. Nobody ever has told me how I should do it. It came quite quickly with shooting. It is naturel the best way to do it. Maybe it is because I have competetive backround in martial arts. So I am trained to refelect my movements for biomechanic efficency.

Pretty kewl.

Great video Bloke and even greater rifle. Have you ever provided a full spec parts list for all of the Frankenrifle? Forend, mags, receiver, trigger, muzzle brake?

My reasoning for not palming the bolt is that in field conditions your hands are likely to be sweaty, mucky or otherwise slick. So if you don't have positive control of the bolt by thumb and index finger, you might find it slipping from under your hand making your shot cycle fumbly. Worse than that would be if your butt was too short and the bolt came back and hit you in the safety glasses giving your friends something to laugh at you for

You should visit one of long range competitions here in poland one day. There is usually "historical" class so you can compete vs mausers and mosins. Rubins etc. Or you can just get with camera and just make a great vid

I am still working on being able to shoot my rifles well. hopefully I will be able to graduate to fast at some point.

You had me at Lee-Enfield...

My uncle told me to be aware of the cocking. Does it cock on opening, or on closing? Whichever it was, he told me to "slap the cocking and ease the rest" Not sure if was good advice, but it worked well enough I got a merit badge! I guess he was making sure I applied 'proper Wellie' when the gun was being cocked.

Is the technique and feel the same with a No 3 (P14)? Which is "slicker"?...No 1 Mk III or No 4? I don't own a SMLE, due to expense and what to me is an inferior sight picture, but I have a couple of No 4s (Maltby, one like new and one well worn) and a No 3 (Eddystone). The No 3 I've used in some informal milsurp target matches (100, 200, 300) to great satisfaction...love it, but I've never tried running it fast. Just curious as to your thoughts. Thank you.

You know a video is entertaining when it's 20 minutes long, but only feels like 5 minutes.

Could you do a quick rundown into how the Swiss straight-pull knobs are meant to be held? I find myself using two fingers to pull back then my palm to push forward, but seeing how smoothly you do it I'd appreciate guidance.

"The bolt is not your friend! WORK IT!" Clint Smith of Thunder Ranch

is Franken-rifle 7.62X39? You are using AK Mags, so I'm confused... Nice tips on operating the bolt smoothly/"in a soldierly fashion". Thank you.

frankenrifle has a dictinct de lisle vibe to it !

Ha,ha, drifire snowflakes I'm going to be laughing about that one for a while.

When I did the mad min in training we rested on a sandbag pull in tight to shoulder then bolt it with the left hand reaching over reload with left never taking eye off target try it

I wonder if you put something on the forend of frankinrifle (skateboard tape or a smooth rivet) that made it feel slightly different than the standard enfield if that would help create a muscle memory for mag changes

I used to shoot high power matches with an older guy who used a bolt gun even though the AR is almost completely dominant. He'd say that while all of us auto guys were waiting for our actions to cycle he'd already be past that and shooting 😂

I have to say, I shot thousands of 303 rounds in static target, snap and falling plate competitions (after sprinting 1-300 yards) and I found the fastest way to put accurate shots down range, by far, was to palm the bolt. That’s because the action pushes the bolt back under its own power to a degree and your hand is already on the rifle as your closing it, so overall the rifle is moving less and so it your sight picture. Each to their own I guess...

I was never allowed to wrap thumb over the stock...dad would grill me worse than a drill sergent if he caught me doing that....he taught me how to keep grip on bolt and use ring finger to pull trigger ....shot 5 coyotes in a conest in 15 seconds ...scared me how well i did 😳

I should probably try some of these drills on my CZ 527 rather than complaining about the stiffness of the action. I notice that sometimes your palm was pushing on the cooking piece on closing. Seems like the CZ closes easiest when I drive the bolt forward with my thumb on the cooking piece.

What would be your recommendation for bolt holding techniques for other guns, like belt-bolt Mausers? I have an 1895 Chilean Mauser, and I can't really figure how how to effectively work it from the shoulder. Closing the bolt takes enough force it knocks my sight picture off almost as much as dismounting the rifle does, and it's much easier to fumble at the shoulder than down low.

Do you have any vids on your channel on how to properly disassemble and reassemble a no4 mk1 lee enfield

I'd like to try it on my Anschutz mpr64, but its side lock does not exactly lend itself to smooth operations. Addendum: I tried and it works, if I do in a soldierly fashion.

Great video! Any tips on making an Ishapore 2A cycle smoother? Bolt is sticky to open whether loaded or empty. Headspace is good is does not close on field gauge. Thanks

Hey Bloke and Chap, I just picked up a rather cherry early pattern 1891 Argentinian Mauser. Do you lads know much about those old girls?

Frankenrifle has become ,my, word for jealousy.

Grab the ball firmly....got it

I know this is an old video but speaking of large magazines have you ever seen or heard of an original Enfield (NO.1 or NO.4) converted to take .303 Bren gun mags?

Which was the video that described everything you had to do to get the franken rifle to shoot well?

M10a1 So want one of them , where can i get one ?

I was wondering. What exactly does he mean by following through?

⚡

How do you feel about the phrase “Slow is smooth. Smooth is fast.”? I need to practice gripping the bolt as you do between the thumb and index. I do not palm, but I sorta do that other technique you did.

What a cumbersome rifle.

So you cup the ball with your thumb and forefinger, leave the shaft dry and give it a tug?

I wonder what that special thing is🤔

I was shown the muscle memory for rapid fire used by special forces before D Day. It is unusual and different. None of those guys are alive anymore.

Why on Earth didn't Australians itegrate SKS clip guiderails into the bridge of that M10A1? Also, too many Lee-Enfields, to little 'other bolt-action rifles'.

qui doscet, discet, (those who teach, learn) While a person will have one level of understanding if they have mastered something, they will achieve another, deeper level of understanding when they have to explain it to someone else.

I noticed you covered the Mosin without sullying the video by speaking that name... Have you ever measured the difference cartridge length makes on cycle time? It's easy to think that there would be a significant difference between 7.62x39 and 7.62x63...

So what is the point of the charger bridge without a charger cut out...looks like a Stevens Savage bolt release

Good vid... I was taught to "palm" a .303... however. I must re-view your vids to see this 'running' stuff of which you speak... I haven't noticed it.

I hate that the 7.62 Enfield rifle was killed in its infancy. I was so looking forward to buying one. If I remember right, the US wouldn't allow them in because the wood for the stocks was sourced from Vietnam, thus making it a no go for the US market.

Which mags do you run? Bulgarian?

Are you getting a "Rim Jam" patch from C&Arsenal?

If you have a Lee-Enfield and you want to shoot faster, you sell it and buy a semiauto. I'm kidding. Great video.

It is nice to be young. I can no longer get into the prone position.

Does anyone know what happened to Australian International Arms? I can't seem to find anything about them anymore.

British stereotypes: proper, kind, gentle British rifles: just beat the shit out of it

16:16 uh oh! bloke said the naughty s-word! I say, bloke! Say ye not that one chargeth one's firearm with a charger, and not a "stripper clip"? The only stripper-related clips I have in _my_ house are on the betamax tapes I hide under my bed!

Fastest way to cycle a bolt when prone is to only use your index finger on the bolt, not having to lift your elbow or head is a huge advantage when it comes to stay on target. This will not work with a cock on close bolt. And it takes a lot of practice to do well.

Hail Frankenrifle! Maoist Rifle sling?

I cannot make the SMLE grip angle work, brits must have 90 degree wrist joints.

Oh I am having a manic moment....covering fire please.

LHO vs JFK?

palm the bolt to shoot fast, simple as that

You can have a M16 in Britain? Well bugger me, we can’t have anything semi aut in Australia.

Franken rifle needs a charger cut out.

1:56 - is that ... rust?