To Dig or Not to Dig- Grunts and Iron with the Simplex

Рет қаралды 8,390

3 жыл бұрын

Should I dig it? I was asked if someone should avoid all signals with grunts, and not dig them. UMMMM, that is a very tough question, and the answer is- It depends! Hopefully I can help you out on ways to decide if you should dig, using slag as an example. Please get in touch if you have any questions. Link to Simplex + Owners Group- / 286630469068377

Пікірлер: 30

@thesimplexguru1263 3 жыл бұрын

Thank you Baldybob1 for the idea to do this video!

@djs61909 2 жыл бұрын

I’m so new I haven’t even started! Your vids are just what I needed! Can’t wait...

@DTEKTSUSSEX 3 жыл бұрын

What a great video! Really informative. Just found your channel today and the first video I watch you've mentioned my videos! Thanks for that. It was my first Charles II so wasn't aware it was an unusual signal. I find 2ps can be anywhere from 80 to 90 in the fields I'm in here. Have subscribed and look forward to watching your previous and future videos! Happy hunting! 😃😎👍🏻

@ablettgone 2 жыл бұрын

Such an informative video Guru, watched it yet again as I’m so new. I understood everything you were saying about iron grunts in field mode bashing grass stumps and the like. I dig so much iron on my first organised dig last Sunday, I’m going to try park 1&2 tomo on mates permission and adjust sensitivity and back up with other mode checks. Thanks for your great work and vids 👍🏻👍🏻

@KernowekTim 3 жыл бұрын

Excellent Lori. This video is a 'Must watch' for sure. You have done a fine job with all your videos. This particular one is the 'master piece' for me!..Great tutorial, in all respects. Stay safe. Keep up your great work please. ATVB.

@baldybob1 3 жыл бұрын

Thank you Lori great video ❤️

@christopherstevens4997 3 жыл бұрын

Another brilliant video Lori thank you :)

@cliveclynick4667 3 жыл бұрын

circle the target and see which tone dominates--especially with a shortened sweep. even chains can be recognized that way--a good conductor amongst bad ones. I like your enthusiasm--keep digging --clive!

@colinwescott5004 Ай бұрын

I'm finding what I think is meteorite material and its strong signal at 90 s id levels , lead is in the 60 70 range

@alexsteeves8644 2 жыл бұрын

Here in Canada I’ve dug coppers that rang in at 85-90. only happened a couple times. most ring in at 65-75. I blamed it on the soil 🤷🏻‍♂️

@metaldetectingqueensland1233 3 жыл бұрын

Sounds beautiful doesn't it? Even with the sweet background noise targets should still stick out like dogs ball's lol 😊👍🏻

@GarnetCarmichael 3 жыл бұрын

Great job covering the famous 4 signal we Simplex users trust is iron. I've never dug any 4 signals so I can't say for sure that they are in fact iron. However I've dug numerous 97 98 and sometimes 91 signals that were huge iron and yet gave no grunt. I'm thinking I should notch out the high 90's signals to avoid this dilemma. 95 and up, what are your thoughts? Have you ever had a 95 or up signal that was something other than large iron ? Thanks for another video, Garnet.

@thesimplexguru1263 3 жыл бұрын

Hi Garnet, thank you for your comments and question. I’ve dug 04 as part of a bouncy signal, and as a solid signal to check, back when I was starting out. It’s always been iron for me. Re notching out 95+. I wouldn’t, UNTIL you know a field. This is because I have a field that has coal/ slag/ charcoal, some sort of burnt waste in it, and the identifier for the bouncy signals there is 95/96! It’s not a 19-20 or grunty with the bright sounds, it is 95/96 with the bright sounds. If I had it always notched out, I wouldn’t know this. Once you know your field, and know it’s not needed, then it wouldn’t hurt, but I wouldn’t do it until then. Hope that makes sense, any more questions, please ask :)

@bleepingfun 3 жыл бұрын

If i hear a grunt behind the Iron sound i dig it most of the times, i dont mind that extra digging :)

@randallowens7691 3 жыл бұрын

Thanks I got a simplex mine does that same thing in my yard I thought I had a bad machine same noise everything a d I pulled rocks out just like that

@terrystanforth4324 Жыл бұрын

I can't get my ground balance set for the beach. Stock coil and sp24. The makrosymplex just goes crazy. Any suggestions will help. Thanks I'm new to detecting.

@ludilo1104 3 жыл бұрын

How you set up nokta pin pointer tu turn off number 4 of material, how to set pointer to see just a coin

@joestagner7817 Жыл бұрын

Laura as far as sounds for the hard of hearing people like me is there one best way to setup my Hot Rod or are headphones going to help with that

@metaldetectingwarrelics3639 3 жыл бұрын

What would you run the simplex in for a very mineralised river.

@darrenclarke553 3 жыл бұрын

beginner just bought a simplex vdi stands for? Cheers for your videos 👍

@dankrep1530 3 жыл бұрын

Hi Lori, Would it not be simpler for Nokta to add a menu item for selecting coils? If "SP24" is selected then the software would use the "sp24" sub-code and if I choose SP28 then it uses SP28 code; this way there would be no mucking around with various update selections for different coils. better yet, with an ID in the coil, the soft auto-select the routine to use...no user intervention.

@mikebeattie862 3 жыл бұрын

Hi Lori what would you do in a situation of 04 followed by a mid 60s to a mid 20s on the vdi

@user-vb6fb9ix7i Жыл бұрын

Why are you not doing vids anymore??? Gareth

@colinwescott5004 Ай бұрын

It's the ph of the soil

@silversurfer3202 3 жыл бұрын

I'm falling hopelessly in love with you!!!

@luvjesuslee2033 3 жыл бұрын

I just received the SP24 coil for my Simplex went to the Library to use their computer to update my Simplex as I don't have a computer. Unfortunately the Library Computer won't allow the PDF download..Can I use my SP24 coil without any updates until I can figure out away to the use of a computer?? I trust you since you are to me the most versed with the Simplex+. Thank you so much for all you do for us Simplex+ owners/users.

@luvjesuslee2033 3 жыл бұрын

I got my answer when I opened the box for my new SP24 coil. It won't run without an update.