Toast Dyno Day #2: We Turned Up The Boost, Made EPIC Power, But Then... BANG
Рет қаралды 1,342,867
4 жыл бұрынTOAST SHIRTS AVAILABLE NOW!!! - www.cleetusmcfarland.com
Hey... it's a start, we will fix whatever is broken and be back!
Toast's New Supercharger - theblowershop.com/tbs-blowers...
Here's some of the items we got off of Summit Racing:
Toast's New Engine - blueprintengines.com/products...
NEXT Cleetus and Cars dates:
Nov 23rd Bradenton
Here's the new Cleetus2 Channel - goo.gl/Ph2wyo
Here's our Full Schedule for 2019!
cleetusmcfarland.com/our-2019...
Holley's new channel - / @placesholleypoops9094
-Leroy's Injectors! - fuelinjectorclinic.com
-Leroy's BILLET Intake! - frankensteined.net (10% off one if you use coupon code "GODBLESSAMERICA")
-Leroy's Clutch (LT1-RR Triple Disc) - monsterclutches.com
-Leroy's ECU (Holley Dominator) - goo.gl/JjvakM
-Precision Turbo (turbos, BOV, waste gates) - www.precisionturbo.net
-Jeremy's Shop, Fasterproms (tuning) - (813) 476-7364
-Texas Speed & Performance - (512) 863-0900
-Motion Raceworks - www.motionraceworks.com
-ProFab Performance Plus - (727) 849-9300
-RPM Transmissions - www.rpmtransmissions.com
-Billet T4 Flanges - www.streetcarrfabrication.com
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1
**SEND ME FAN MAIL... (bald eagles welcome)
Cleetus McFarland
12961 44th St N. Ste B
Clearwater, FL 33762
United States of America
@Nzpure 4 жыл бұрын
It takes many steps to reach the mountain summit, but only one slip to fall all the way down. If people are hating they clearly have never tried to make big power in a car before my bro. Keep up the good work, looking forward to see toast burn some rubber!
@Dave-ui6xn 4 жыл бұрын
Master Valve prolly has low pressure. Check the Cam heads for carbon build up. Pony up and pay for 93 octane with invigorate. Set timing to .05° south. Spray WD-40 into blower manifold. Glad I could help.
@AB-nv7bz 4 жыл бұрын
Nzpure he got a really expensive motor and installed the distributor wrong and broke it. Lol
@Nzpure 4 жыл бұрын
Aaron Bailey Yeah and I rebuilt my mighty Holden 5 litre and got my t5 “built” then didn’t install the spigot bearing properly and my fancy new billet flywheel grenaded lol. We all make mistakes specially when we are trying new things. Such is life. Anything other than a good old fashion ribbing for a mistake isn’t worth the pixels it’s written with is my point.
@Gasser30007 4 жыл бұрын
@@Nzpure Your biggest mistake was buying a Holden
@Dave-ui6xn 4 жыл бұрын
@Zenme Yangzi That turbo needs an intercooler and downtube then they would have their boost at 15 BTU's
@01gtbdaily30 4 жыл бұрын
I don’t know much about pulleys on bicycles but I do know if you put a Baseball card in your spokes you gain coolness
@DP-nk4vu 4 жыл бұрын
ryan lemons You Tube Channel!!! Is that a mustang you’re talking about? Lol
@iCarlyfan4534 4 жыл бұрын
better aero
@CCDVIDEO 4 жыл бұрын
Hahahahahaha the famous old card in the spokes 🤣 can hear it go krrrrrrrrrrrrrr
@collapse4068 4 жыл бұрын
FAX
@chandlerm2571 4 жыл бұрын
Extra 15 horsepower on your bike
@heavyhemi2828 4 жыл бұрын
Garret, Mike Finnigan has a good video on installing a distributor. goes over how to measure everything.
@stevenplaskett7728 4 жыл бұрын
Yeah I watched that one. He did mention he has never installed a distributor before. All his motors as ls based with no old school distributor gears or timing that way
@keithfiredive 4 жыл бұрын
I saw that one too. Didn’t realize you had to set the lash similar to the rear dif pinion gear. Sometimes you gotta learn the hard way.
@TurboVisBits 4 жыл бұрын
@@keithfiredive its worthless information. Distributors are stupid and abandon technology.
@thekiolbassa 4 жыл бұрын
@@TurboVisBits very helpful input.
@shadow105720 4 жыл бұрын
@Mod Zozer wow he never built a car from the 80s or sooner as someone who's no more than 30 something. What a surprise!
@instigatorracing1216 4 жыл бұрын
3:37 Cleetus definitely smoked those boxes and had to dump the clip
@coltonjones2398 4 жыл бұрын
You can see them completely fucked in the very next shot XD
@johncuervo3019 4 жыл бұрын
They moved them
@RJ_Cormac 4 жыл бұрын
Yep, driving by braille 😎😂
@B-U-C-K-S-H-O-T 4 жыл бұрын
Love the fact these folks are showing it and owning it. That shows the character of this race team/garage.
@crdragon8089 4 жыл бұрын
"We did some stuff that we werent suppost to do and it broke, Now we need to fix it" If that doesnt sum up this channel perfectly i dont know what does haha i love it
@Nathan-qm6dh 4 жыл бұрын
Man Finnegan just made a damn video on how to measure to set the height on that collar of the disi for these aftermarket big blocks
@taylorbrown7663 4 жыл бұрын
I was going to say, I watched that video as well. Super informative.
@fastlanez3000 4 жыл бұрын
Link to video in Finnegan's Garage kzfaq.info/get/bejne/a6p4jNBny9SuhJs.html
@jradddsr5444 4 жыл бұрын
Lmao karma he knows his shit has some bad ass boats
@nedj10 4 жыл бұрын
Thought the exact same thing...
@AMERICANLEGENDModelBuilder 4 жыл бұрын
When some doushe nozzle is right but ruins it by calling it a disk😒🤮
@ThatOneGuyMatt 4 жыл бұрын
One of my favorite things of this channel is even tho you are balling outta controle you keep shit real. Just normal dudes building cars. Build, break, fix, repeat.
@remyche8768 4 жыл бұрын
When in Australia find a burger shop called burger aurge, if you have a mullet you eat for free
@JohnnyAnderson1 4 жыл бұрын
So do we call it “burnt toast” now? Lol
@seanevans122 4 жыл бұрын
That's too far bro smh..
@themastertuna 4 жыл бұрын
Burnt toast played at florida. Teez tabor.
@chetSeminole 4 жыл бұрын
Just gotta butter toast up. She'll be fine.
@pepperthekobold 4 жыл бұрын
These things happen folks. Sometimes a car does something weird but it has to actually break before you can figure out what it is. Tuners are tuners, not wizards.
@CCDVIDEO 4 жыл бұрын
Burnt toast 🤣🤣🤣 cracked me up bro
@emenesu 4 жыл бұрын
We need to see the Sebring clips. Life is more than just going in a straight line, brother!
@randomstickguy67 4 жыл бұрын
You know he tracked Leroy at sebring before. U should go back and watch it
@coltincraigo5007 4 жыл бұрын
Sideways-X agree. Wish they would build a road course car. No other KZfaqr really does road race stuff.
@Redline3232 4 жыл бұрын
I would absolutely love to see a day at champ car or any road coarse stuff
@Cowboy.underwater 4 жыл бұрын
@@coltincraigo5007 RIGHT?!?!?! It's not like they have a spare NASCAR truck lying around with a rowdy 427 ls crammed under the hood. . . Because if they were lucky enough to somehow have one of those laying around that literally wasn't being used for ANYTHING, it would probably take almost zero effort to convert it into a road course destroyer.
@The_Gallowglass 4 жыл бұрын
My girl asked what the hell I was watching and I told her the world's nicest hicks and their monster cars. "What the heck was that sound?" "Freedom." :D
@maanan5761 3 жыл бұрын
I love your way, so honest, fun and straight forward, thank you from the bottom of my heart!!!
@prestonbusing5251 4 жыл бұрын
Irony Mike Finnegan's Garage a few weeks back, covered this exact subject on do's and dont's of the collar for the dizzy... Guess yah missed that episode?
@DrGand 4 жыл бұрын
Had to scroll too far to find this haha. I JUST a few weeks ago spent like half an hour watching that video for no reason lol.
@kindellh7495 4 жыл бұрын
I literally thought the same exact thing
@moparfan2015 4 жыл бұрын
This was thought to lol
@ABetterLifeInc 4 жыл бұрын
I watched that video last night.
@jcnpresser 4 жыл бұрын
That’s funny, I was thinking the same thing.
@TheJohnb35711 4 жыл бұрын
Cooper's interjections are becoming my favorite part of this channel
@michaelscott-joynt3215 4 жыл бұрын
His wit is quicker than his V.
@hillbillyhippie597 4 жыл бұрын
🤣😂🤣😂
@jessemartin2698 4 жыл бұрын
Cooper definitely was an acquired taste for me and he is hilarious
@Jefreeman13 4 жыл бұрын
Beatz I just think he’s grown in front of the camera! He’s been really funny the past few months
@LIamaLlama554 4 жыл бұрын
He has a rapier wit.
@alfreddedam1947 4 жыл бұрын
If it's any consolation, your setbacks offer a lot of value for your audience. I have learned so much by watching you guys diagnose problems, keep up the good work.
@jimmcginnis9668 4 жыл бұрын
I love the sound of horsepower in the morning...awesome.Back in the day...I had a 67ChevyII that put out 625 at the clutch and 550hp at the rear wheels.Old gear head here and you can't beat a dyneO...zoom,zoom...😎🚘
@redsballer1904 4 жыл бұрын
Maaaan if it had a Texas speed engine we’d be able to call it Texas Toast
@MrRobschnieder 4 жыл бұрын
This comment right here!! Take my upvote
@offtapp8556 4 жыл бұрын
I don’t know why he didn’t get Texas speed to build him a motor for toast
@MrRobschnieder 4 жыл бұрын
@@offtapp8556 I believe they said blueprint is well known for making top notch big blocks. May be something Texas Speed isnt as renown for unlike their success with their LS builds.
@weller1465 4 жыл бұрын
@@offtapp8556 texas speed only does LS stuff no big blocks from what I can see. Blueprint does an awesome job with their engines especially with the big blocks
@offtapp8556 4 жыл бұрын
09GT500guy true true , I thought that big motor would make well over 1000 . Weird but I guess Texas speed do only do ls
@eased4183 4 жыл бұрын
14:07 is what you guy are lookin for
@sanderwaglen4904 4 жыл бұрын
thanku so much!!!!!!!!
@GusMashensic 4 жыл бұрын
Toast Dyno Day #3.. Here we go! Toast sounds so cool and makes me happy so I definitely don't mind. I wanna see that 1000!
@mj_aussie_coaster_travels8310 4 жыл бұрын
Should have just brought the dale truck to Australia.... you don’t get much more ‘murica than a nascar truck.
@pedrotski 4 жыл бұрын
Yep, or neighbour. Everyone has a blower car at burnout events here. So boring.
@kramnull8962 4 жыл бұрын
Hell, that police car does an amazing job, for what it is...
@darrencorbit5994 4 жыл бұрын
@@kramnull8962 I also dont think toast is gonna catch on fire
@MMunstoppable03 4 жыл бұрын
pedrotski2007 yup if anything just take neighbor over there that thing is bad ass enough
@mj_aussie_coaster_travels8310 4 жыл бұрын
I’m wondering if toast will be left in Australia. May have a buyer lined up for it already?
@alltheboost5363 4 жыл бұрын
The moment the distributor shaft messed up you should have pulled the motor at a minimum pull the intake and the oil pan.
@craigcode7103 4 жыл бұрын
That's what I was thinking.Valve covers as well.
@wesleyaitken8756 4 жыл бұрын
yeah I gaurantee you those bearings didn't like the metal shavings from those distributor gears
@Danger-Dave 4 жыл бұрын
That "was" a composite distributor gear ..... still you don't want to just replace it and rock on with the bits in the block/oil pan ect...
@boltonky 4 жыл бұрын
Keep it up we do all enjoy the hardships and success and be glad your using a platform that has parts widely available...1000hp is still crazy power when you consider it.
@Mendoza1113 4 жыл бұрын
Learning how to set a distributor should be in the bald eagle hand book.
@ChuckBeefOG 4 жыл бұрын
One of them ol school timing lights? I dont even touch engines but i know what that machine is lol.
@ericjohnson8482 4 жыл бұрын
@@ChuckBeefOG That's not an old school timing light, that's pretty new.
@freddylong156 4 жыл бұрын
Yeah thats day one shit there
@spencerrosas1587 4 жыл бұрын
Crazy how quick we stop everything to watch these amazing videos
@TheOnKnee 4 жыл бұрын
Shh, I am trying to watch this Upload!
@chetSeminole 4 жыл бұрын
I guess my lady friend will have to finish "the job" herself once again. Thanks McFarland.
@winging-it-works 4 жыл бұрын
So true
@gmoney6508 4 жыл бұрын
Facts bossman is watching it with me
@Spencer6k 4 жыл бұрын
As another member of the Spencer club, I agree.
@SS454LS6 4 жыл бұрын
I couldn't help cringe when you were going to do another pull knowing the distributor gear teeth were floating around the crankcase. I think you need to pull the engine and do a full inspection.
@fanimej 4 жыл бұрын
Amateur hour really... If you shred a gear like that you just dont hope and pray that it wont end up in the bearings.. But i guess it doesent matter when sponsors pay the bill..
@11darkfuneral11 4 жыл бұрын
That’s simply an LS guy for ya.....
@brettbaratheon9776 4 жыл бұрын
MikesRandomCars wow, just hate hate hate. Someone sounds jealous and bitter. Call your sponsors up......oh wait, you’re a bum.
@ichoozjc 4 жыл бұрын
@@brettbaratheon9776 Nothing he said isn't true.
@fanimej 4 жыл бұрын
@@brettbaratheon9776 oh no! You bested me.. I do have a sponsor actually.. Its called my job and the only thing to complain about are the money and the time.. But what ive learnt is that if you have to pay for shit yourself you appriciate it more because you know how long it takes to afford it again.. Therefore i would tear that engine apart and not risk it for The biscuit
@Friend_of_the_One-Eyed_Ladies 4 жыл бұрын
Videos like this one are why I hang around. Classy, even in defeat. Stuff goes wrong, that's life. The worst days make the best stories.
@Danth01gt 4 жыл бұрын
Bummer! This has become my favorite project! Hopefully nothing too bad and you guys are up running again soon!
@JasonMisterDude 4 жыл бұрын
Cleetus: "I'm already feeling a lot better about this situation" Also Cleetus: "We need to give it a compression test, leakdown check, we need to pull the blower off"
@bigblockbumpside2296 4 жыл бұрын
JasonMisterDude thats funnny lol
@kramnull8962 4 жыл бұрын
Finnegan's Garage Ep.79 Tells how to measure for the drop of the distributor gear.
@richardbrowne1217 4 жыл бұрын
"That's not a mullet!" "That's a mohawk!"
@thethepete731 4 жыл бұрын
Came to say this.
@locotrucker46 4 жыл бұрын
Yeah a mullet is business in the front, party in the back.
@richardbrowne1217 4 жыл бұрын
@@thethepete731 👍
@richardbrowne1217 4 жыл бұрын
@@locotrucker46 👍
@alt7488 4 жыл бұрын
close enough
@Mellonpopr 4 жыл бұрын
sharing success and failures, I like your honest style and we're all learning from it so thanks
@dougs2906 4 жыл бұрын
Where you been cleater ?! We are having withdrawals!!
@bullyborg943 4 жыл бұрын
doug s he has been racing Sebring and won
@bradykennedy6974 4 жыл бұрын
Mad facts withdrawals are real
@chetSeminole 4 жыл бұрын
I hate having to turn to meth when I don't get a video to satisfy my craving.
@brettbaratheon9776 4 жыл бұрын
Dude, for real. Checking KZfaq everyday like an addict.
@stevenferreira8947 4 жыл бұрын
Like number 200 🤙
@jorgecaraballo1771 4 жыл бұрын
Stripped gears off the distributer, means that block needs a bath in the hot tank!
@lerch400block 4 жыл бұрын
And prayers to Dale
@glockspecific7757 4 жыл бұрын
Ya it would have been best to stop, lessons learned!
@larryh9933 4 жыл бұрын
I AGREE, CLEAN THAT ENGINE OUT.
@fuckeththou8925 4 жыл бұрын
"hoping they fall down into the oil pan" sounds like a lot more working on toast content.. maybe he likes doing that more than burnouts? We will never know I guess...
@glockspecific7757 4 жыл бұрын
@@fuckeththou8925 Lmao you right, not sure who that statement came from first? Hoping they fall down isn't going to happen
@Mario10070 4 жыл бұрын
You guys make great content. Fun times at the track, shenanigans & even your failures. The way you guys make these videos, always engaging us is amazing & that’s why my notifications are on. YEEYEE
@samlopez605 4 жыл бұрын
Im in the same boat. I had 4 cars not running and got one on the road. Second is half ways done and the other 2 well.... Stay tuned lol... You guy will fix it just take time and chill and regroup. Luv the new shirt me n my boy will be sporting them soon cant wait... Bawg deep yall
@ShiiSTYinHD 4 жыл бұрын
Honestly Garret’s mullet is lacking the bald eagles that james’ has achieved.
@ChopsMahone 4 жыл бұрын
Who?
@allencarabajal8989 4 жыл бұрын
James’s doesn’t even look like a real mullet, looks like a messed up Mohawk.. Garret’s will be way better, give it a few months. It took 6 to 7 months before I was happy with mine.
@gavinhirt5231 4 жыл бұрын
@Dominik Ladoš and bald by 40 rockkinn the toupee mullet lol
@slofobra4966 4 жыл бұрын
I need my mullet for halloween.
@gavinhirt5231 4 жыл бұрын
@@slofobra4966 got mine and i have to shave it for a new job a holes could claim religion but I'm not you shite famous someone has to cook at affole wafhole lol
@ClumsyCars 4 жыл бұрын
if coop doesn't grow a mullet then he isnt a team player
@2kshortgod554 4 жыл бұрын
Factsss
@patrickb2169 4 жыл бұрын
Leave him alone.. he's trying his best :(
@pbjealousy2348 4 жыл бұрын
It wouldn't be a mullet, it would be a coop scoop lol
@patrickb2169 4 жыл бұрын
Maybe he just grows his mullet somewhere else
@tbonedude1 4 жыл бұрын
@@pbjealousy2348 😂😂😂 omg a coop scoop! LMAO!
@maxboya 4 жыл бұрын
Finally. A real genuine video. Took you long enough Cleetus. I like that Kevin guy and shout out to the OGs cooper and James.
@ntygrty2924 4 жыл бұрын
failed attempts are just as good as successes love watching you learn by your mistakes true reporting truth always wins in the end keep it up love it.
@jeffstidham7240 4 жыл бұрын
5⅝ⁿⁿ
@Sir.VicsMasher 4 жыл бұрын
I remember hearing that roller cams require a bronze or composite distributor gear (softer material) so it wont damage the camshaft.
@Stevesbe 4 жыл бұрын
Yes they do
@danmyers9372 4 жыл бұрын
Distributor gear should always be softer than the cam gear. Replacing a distributor gear is nothing vs ruining a cam.
@mattvorhees6055 4 жыл бұрын
There are a few things wrong
@Stevesbe 4 жыл бұрын
And I would think james would know that he's been doing race car shit for a long time no doubt he built a motor with a roller cam before
@abolishwelfare 4 жыл бұрын
Not always. Depends on the block and the cam used. My mkIV 454 uses a Howard’s Cams “retrofit” roller cam that uses a cast gear. The best course of action is to contact the cam manufacturer directly and eliminate all guess work.
@joseph12345678914 4 жыл бұрын
I cant believe you ran it with those distributor teeth in the engine.
@Danger-Dave 4 жыл бұрын
That "was" a composite distributor gear ..... still you don't want to just replace it and rock on with the bits in the block/oil pan!
@mk-jf1ux 4 жыл бұрын
kevin and james shoulda known better and with cleetus filming cooper looked lost and obsolete
@CDP135Z 4 жыл бұрын
I’ve never engine work, but I’ve definitely broke stuff trying something new. That’s how you get to great! Keep going brother!
@locotrucker46 4 жыл бұрын
Wow. Say it isn't so. My heart is breaking for toast but I know you guys will get it fixed. Toast is so awesome!
@gtametro 4 жыл бұрын
i only recently learned how important setting distributor height is when building a performance motor, thanks to finnegans garage. tbf i've never had a big old american V8 to mess with, only modern euro v8's and old 4 bangers and v6's
@thegreatwhite2004 4 жыл бұрын
Lol mate ive got a built 360ci in my",98 jeep grand cherokee I daily drive her she got power",tons of fun in the snow with 458hp hoping to get a bigger cam make her chop
@sik59rt 4 жыл бұрын
the great white 458hp from the 5.9? How much boost?
@thegreatwhite2004 4 жыл бұрын
@@sik59rt 50 shot",my kids call it go!! fast juice its cheapier then buying the supercharger and billet bracket
@sik59rt 4 жыл бұрын
the great white so 438 from a 5.9 magnum with no boost and not stroked? They only made 245hp stock..
@thegreatwhite2004 4 жыл бұрын
@@sik59rt 318 bored to 360 with eagle rods and pistons my special head and cam job,tons of fun look em up on youtube silver 5.9 with 400 hp off an old junk yard dodge truck rebuilt sence their common in dodge trucks quick swap if your broke and if not buy it straight from Chrysler.
@bcmfarmsllc8103 4 жыл бұрын
Damn! Kyle makes that with his little Prelude!
@aldulainthelenor1845 4 жыл бұрын
Hey man it happens. Gotta have mistakes happen so that you can learn from them. You are still the first person to get a GM stick shift into the 7's. You got this man!
@25Neo 4 жыл бұрын
james little comments are the best, with leroy bending valves and what not, lightens the mood
@mfree80286 4 жыл бұрын
Oh jeez... no, those teeth didn't all make it into the pan, and you'd best be on the horn for another cam and a set of lifters before you even pull the intake off and look. Rockers don't just pop off, something interfered with the lift profile and put it beyond limits, you'll likely find a gouge in the cam lobe and lifter face and PRAY that when the valve overextended it didn't kiss the piston. That's not even mentioning the damage to the drive gear on the camshaft...
@thizzobishi 4 жыл бұрын
Much agreeance here as i watched on i was like damnnnn. It didnt back fire the dizzy poped of and it went all to shit obviously it ran after its not living up to its name thank god but its gotta be hurt
@Mad.Man.Marine 4 жыл бұрын
Ya. First thing I thought was man. I bet a piece of gear tooth made it in between the lobe and lifter. I’m betting on a bent valve or pushrod.
@79huddy 4 жыл бұрын
Didn't index the distributor the gears bound when the cam walked forward from the cam button wearing down from a constant load on it from the gear mesh being to tight bottom of the pan probably looks like someone dumped never seize in it
@fubarmofo6969 4 жыл бұрын
Lmao another opinion, their just like assholes... everyone has one
@jajabinksGG 4 жыл бұрын
It’s definitely “toast”
@fubarmofo6969 4 жыл бұрын
Lol these geniuses turned it into BURNT TOAST!
@benjaminpowell9758 4 жыл бұрын
Beat me to it...
@derek2smith 4 жыл бұрын
Go home dad!
@kevinjd9869 4 жыл бұрын
That thing sounds freaking amazing, HELL YEA BROTHER !!! and btw stay safe guys and have a blessed week
@Redbluegreengo 4 жыл бұрын
Motor: YEAH I FEEL GOOD! Distributer: Hang on... Hold my beer.
@BrieferBread66 4 жыл бұрын
We were on our way to a 1000hp now we’re on our way to the engine stand. Hot rod 15:14 Build, Let Er Eat, Break, Repeat.
@gostriderblack 4 жыл бұрын
A shirt with toast on the dyno and a fireball shooting out the bottom and call it the big bang theory. I want that shirt
@casey0012345 4 жыл бұрын
ghostparty that’s perfect
@LadyJesterSurfer 4 жыл бұрын
All this talk of HP, I want to hear the torque #s
@matthewbuttle 4 жыл бұрын
Times the hp by 5252 and divide by rpm and you should get torque
@daveveldman3947 4 жыл бұрын
❤️ from 🇨🇦 Cleeter hope toast is okay and gets back on his feet to give you that 1000hp of freedom! good luck on the tear down and rebuild praying everything goes well for you guys just keep on truckin’ would love to see a Hemi build someday 😊
@ohmbre300 4 жыл бұрын
I'm not emotionally equipped to deal with ya distributor teeth floating around in that engine
@sc0tte1-416 4 жыл бұрын
Hopefully they are just sitting in the oil pan
@johnj1071 4 жыл бұрын
I hate to be the pessimist in the room, BUUUUUT... The polylocks likely stripped when distributor teeth got between the cam lobe and lifter causing over-lift. a new cam/lifters with some spare pushrods/rockers/polylocks SHOULD get you going BUT i heard a weak hole (low comp) during start-up after you boys fixed the rocker that "fell off" so i bet the heads (BOTH) need to come off for valve inspection/repair.
@jordaneimer2873 4 жыл бұрын
if it was MY 40k+ engine i would have immediately done a disassmble. truly no bueno to turn it over knowing there was steel floating around
@adamcarver5599 4 жыл бұрын
Cleetus I can only say you just have to know that you know enough about tuning that you can do anything as well as anyone else. It's your money your, car, your dyno, just own it, don't doubt yourself
@awdeveau 4 жыл бұрын
Toast needs to be able to catch fire like neighbor, its just a good show! I'm sure everyone would love a little burnt toast.
@bansheemania1692 4 жыл бұрын
I woulda stoped Soon as I Saw those Chowdered Gears on that Distributor
@danielhiltunen5294 4 жыл бұрын
Agreed. Madness to try another run.
@cjgamer2140 4 жыл бұрын
But your name isn't Cleetus either.
@Jenuin 4 жыл бұрын
bansheemania same
@wesleyaitken8756 4 жыл бұрын
yep, they're young for sure. I would've yanked the motor right after I saw the distributor gear.
@fishyfool 4 жыл бұрын
He needs to get one of those scope cams that attach to your phone and look at the cam for damage, or broken teeth floating around.
@YZFoFittie 4 жыл бұрын
Poly-loc stripped because the valve hit the piston, tear it down before it EXPLODES...
@legionof0ne441 4 жыл бұрын
They didn't say or show anything about the damage but it could have been the backfire slamming the valve up. I would expect they would have noticed if the valve was bent.
@hyperglobalmegadude 4 жыл бұрын
Dang - I bet you're right...
@YZFoFittie 4 жыл бұрын
@@legionof0ne441 highly unlikely scenario there...lol Do you know what kind of pressure the exhaust valves deal with on the norm?
@mfree80286 4 жыл бұрын
@@legionof0ne441 I'd have to go back and look at the piston crowns and angles involved, but there's a possibility that the valve didn't bend but there's always the possibility that the piston crown is cracked. I'm personally assuming the cam wiped a shard of gear under the lifter and the extra "lift" bottomed the spring out.. we shall see.
@legionof0ne441 4 жыл бұрын
@@YZFoFittie Not much coming from the cylinder itself. They open on the down stroke and stay open till they overlap a bit with the intake stroke, The only time they see a force applied is when they are seated to the valve seat. Getting a massive back fire into the cylinder when the exhaust valve is open is however not a normal thing for a valve to experience. That said there is no reason for anything else to happen to that valve in this case. There is no scenario I can think of that would result in the valve getting hit by a piston when the engine was at mild RPM.
@olddmanblackstock6259 4 жыл бұрын
Crazy you did this the day before my birthday this thing is awesome my first car was an 1985 z28 that never hit the road in my possession didn't know anything about mechanics then that thing is super awesome
@shaunpc2512 4 жыл бұрын
Damn guys, it seems like everything is fighting against you all just lately but knowing you guys I’m sure that you’ll be fighting fit and stronger than ever soon enough.
@laurensbent9351 4 жыл бұрын
Is there content comming from sebring? Would love to see some road racing on the channel
@emenesu 4 жыл бұрын
Hell yes, was looking for this comment.
@54raceman 4 жыл бұрын
Never has In past when he’s ran champ car
@AutoXandTrack 4 жыл бұрын
We need some road course content! Would be cool to see coverage of the Champ car event.
@peturstefansson 4 жыл бұрын
Thank you Cleetus for this video. I now you could have skip showing us this video, but you didn't, and I respect you for that. I know you are going to investigate why the distributor gear wasn't in its right place. It was not the best decision, in my mind, to go onward after the distributor gear broke. Now you guys have to put that all behind and spend some time figuring out what went wrong and fix it. There are always these little things that make so much different in the outcome.
@jons4686 4 жыл бұрын
This is great television! I love the suspense. Cheers.
@ImTehFortune 4 жыл бұрын
Thank you for the inspiration I got into making some basic daily vlogs about my Jeep. I’m trying to keep it consistent with the uploads but its such a struggle but I love doing it.
@cobalt0681 4 жыл бұрын
If i remember correctly, the dale truck and the crown vic also make around 900whp. sounds like time for a run off. Cleatus, james and cooper draw for what car to drive and drag race.
@kolinstallman3788 4 жыл бұрын
and they do it with engines half the size.
@sdguy123 4 жыл бұрын
Broken gear teeth running around the engine? No problem, let's give her another rip! /facepalm
@wesleyaitken8756 4 жыл бұрын
shoudl've checked the teeth on the cam gear too, you know they had some damage. *facepalm X2
@wesleyaitken8756 4 жыл бұрын
and then they run it again.... I would've pulled the motor after the distributor gears broke
@sdguy123 4 жыл бұрын
@@wesleyaitken8756 Me too. That's a LOT of money probably down the drain.
@rodgersb1248 4 жыл бұрын
sdguy123 they make more money breaking shit bc of the content, which is why they do it lol.
@JameyCampbell_54 4 жыл бұрын
Bailey Rodgers in 5-6 months this video will have paid for 3 of those 632ci "$15k dressed" knock off Morgan and sons motors
@user-el4ii7zq6l 4 жыл бұрын
Thanks for showing the bad and the good always keeping it real!!!!!
@schoolofhardknocks1096 4 жыл бұрын
good vibes man don’t let it get you down, yall got this
@Godemes 4 жыл бұрын
Prediction: Cam and cam bearings are thrashed. I don't want to sound like Captain Hindsight...
@TheDillio187 4 жыл бұрын
yep.
@randyfarmer4480 4 жыл бұрын
Lmao... I was looking thru the comments to see if anyone said that lol I didn't want to be THAT guy who just says what someone else already said lol
@hyperglobalmegadude 4 жыл бұрын
D'oh!
@luchacefox259 4 жыл бұрын
Better hope the valve seats are good....
@TheSteve1175 4 жыл бұрын
Yea, I'm thinking the cam gear looks like the distributor gear.
@MiniEMoto 4 жыл бұрын
11:21 grandfather tuning coming over to inspect the fresh meat tuner in the shop
@theangryitalian7922 4 жыл бұрын
north422 father timing
@ScottHillsmusclecargarage 4 жыл бұрын
Now that is the sound of freedom!
@kelvinh.1101 4 жыл бұрын
Kevin is a killer tuner! Weekend Warrior Tuner vs. Experienced Legit Tuner indeed. You'll get their Cleetus, you have so many other great strengths. Imagination being the wildest and strongest of them all.
@hillbillyhippie597 4 жыл бұрын
There is a lot of horsepower emanating from James mullet 🦅
@nfriesen10 4 жыл бұрын
Really hope you got some footage of the Sebring race! Would love to see it!
@benische 4 жыл бұрын
Better than any tv show, ever. Keep doing what you're doing!
@alphamail6269 4 жыл бұрын
You're at the tippity top of the mountain but only half way up... Firmest of handshakes extended your way brother 🇺🇸!
@ZSmitherzGaming 4 жыл бұрын
Had to spend 22 mins in the restroom at work for this. Worth every second.
@bradfordcustoms7588 4 жыл бұрын
ZSmitherzGaming always the best bathroom breaks
@cjmeads89 4 жыл бұрын
You don't spend 22 mins in the restroom anyway?
@ZSmitherzGaming 4 жыл бұрын
Chase Meads well usually yes but today was extra worth😂
@jamesglenn2006 4 жыл бұрын
Boss making dollars I'm making dimes That's why 22 minutes on company time 👍
@sthondast 4 жыл бұрын
10 minutes per day on the shitter equals 40 hours at the end of the year! Thats 1 weeks pay to hang out on the can...
@9frankg 4 жыл бұрын
Poor Toast. You'll figure it out Cleetus! We are all pulling for you!
@elonmust7470 4 жыл бұрын
They're making problems for views. NOBODY has as many "issues" as they have over the last year..
@9frankg 4 жыл бұрын
@@elonmust7470 What? Do you have any idea what you are talking about? Your just a hater, or your just trying to start an argument. Either way keep those comments to yourself.
@elonmust7470 4 жыл бұрын
@@9frankg Don't tell me what to say lol. Fanboy much?
@9frankg 4 жыл бұрын
@@elonmust7470 yep defiantly a troll. Ok have fun with that. Good bye.
@9frankg 4 жыл бұрын
@Jim Alley but you care enough to watch his videos and comment on his viewers comments???
@CP110 4 жыл бұрын
whats funny is that about a week before this I saw Mike Finnegan make a video about setting proper distributor height on big blocks. now I know why its so important lol
@MrJoeball225 4 жыл бұрын
Y'all are always trending! Proud of all y'all
@coreyjohnson3942 4 жыл бұрын
The collar height on the distributor was likely for a standard deck height, and that BP engine is a tall deck.
@shakenimpala407 4 жыл бұрын
I can't wait to see this beast on the drag strip
@tnoutlaw73 4 жыл бұрын
I had the same distributor gear problem once. get a really strong magnet and you can stick it to the oil pan and slide them to the drain hole. its a pain but you can do it
@samfurness5730 4 жыл бұрын
You poor guys, I know you will sort it quick. Good luck to you getting to oz can't wait.
@Eddie2425 4 жыл бұрын
Maybe the distributor was down all the way and the bolts backed out? You guys need to start using Loctite!
@twisted2291 4 жыл бұрын
You need to put a locking stud girdle on those poly locks. Bet it bent that valve on the one it stripped out on. Little bit of valve float going on.
@freesexyew 4 жыл бұрын
Hey Cleeter, Dave here from Oz. You cant truly appreciate success with out feeling the sorrows of failure. Its a very endearing trait to be able to show youre veiwers that all your successes arent just easy ,arent just handed to you. You are human mistakes and accidents happen and thats what makes your content relatable, People are able to connect on that level as everyone has has misfortunes building cars. Chin up champ look at how many people who have your back and want to see you guys as a team succeed.
@netburnr Жыл бұрын
It's fun to watch this today and see Toast in his "Young Days" even though he was already an old man before Cleeter got his wall taps involved.
@joelmarr6590 4 жыл бұрын
I love how they got noticed by Mountain Dew and then never mentioned them ever again lol.
@nuttynut54 4 жыл бұрын
I guess they got what they wanted .. a snapback and few cases of dew .. tought dew would of sponsored the dal truck but I guess not
@erickr613 4 жыл бұрын
Probably tried to reach an agreement and couldn’t so why. I have a buddy who is a touring musician, loves Marshall amps, they won’t sponsor him so he pulls all of the logos off
@joelmarr6590 4 жыл бұрын
@@erickr613 That just sounds immature honestly. They were supporting Mtn Dew welll before they were ever in contact with the company simply because they enjoyed the product.
@davidrivas2211 4 жыл бұрын
Dew is still in every video
@rab.. 4 жыл бұрын
It's probably so that they don't end up with another fan sending them 1000 pounds of mountain dew to draw attention to their channel
@boost23 4 жыл бұрын
Love the Positivity. You are a huge inspiration To me. I know about things breaking I drive a Subaru.
@Enduro300rr 4 жыл бұрын
Daniel Sorensen how do you think us ford guys feel 🤣 hey, they all break it’s just about what you enjoy breaking more
@jasonarena1101 4 жыл бұрын
Miss my wrx but not the hardware salvaged from sunken ships that subaru uses lol snapping bolts for daaaays
@adamj3278 4 жыл бұрын
I love the live action keep on killing it guys 🤘🏽
@stevelong6213 4 жыл бұрын
Just a learning curve.... It'll come around for you.... Keep up the cool vids.
@Incommensurate 4 жыл бұрын
get a crank trigger for the timing, more accurate and no cam flex to worry about.
@rowancostello8723 4 жыл бұрын
It is crank trigger timing isnt it?
@NathanielHatley 4 жыл бұрын
@@rowancostello8723 The timing signal is coming off of that unit that has been installed where a distributor would normally go, which is driven by the camshaft. I think they said the block is based off of a Gen IV GM big block, so it doesn't have provisions for a crank timing sensor. EDIT: I meant to say Mark IV instead of Gen IV.
@cwhaaatt 4 жыл бұрын
Yeah so cooked get a crank trigger.. normally that unit is just used as a home trigger
@Incommensurate 4 жыл бұрын
www.holley.com/products/ignition/crank_triggers/crank_trigger_kits/parts/8620
@rowancostello8723 4 жыл бұрын
@@NathanielHatley ok. I run a dart big m block with a 14/71, so for ignition I use the 58 tooth wheel on the crank, a 50 50 sensor out of the dizzy port and that talks to the msd 6ls box. I have carbs at the moment but all seems to work pretty well.
@freedomfox8183 4 жыл бұрын
That car is intimidating as hell just at idle.. lol and as much as I love the name Toast I feel he missed a good opportunity to name it " Intimidator ". For Dale .. pretty sure someone recommended it ..
@mikeo5612 4 жыл бұрын
That would be copycating tho bro. What are synonyms for intimidator... 🤔
@marmar130988 4 жыл бұрын
i run mine at 7200 rpm on burnouts and you need big push rods and a great set of shaft rockers to stabilize the valve train.
@2stroke540 4 жыл бұрын
Part of The excursion, brother. Keep up the good work and God bless.
Cleetus McFarland
Рет қаралды 1,8 МЛН
Cleetus McFarland
Рет қаралды 726 М.
Diesel Creek
Рет қаралды 453 М.
Firing Up Ruby With Her NEW Texas Speed 7.0L V8 + Completely Changing Her Turbo System...(we had to)
Cleetus McFarland
Рет қаралды 1,1 МЛН
ОВР Шоу
Рет қаралды 7 МЛН
Нарезки из фильмов
Рет қаралды 2,7 МЛН
Рисунки Гели
Рет қаралды 2,4 МЛН