This is soo good, you won't believe.

Рет қаралды 13,729

Tomislav Tomasic Woodturning (Dodir Drva)

29 күн бұрын

So much fun using these old paints to create something unique and EXTREMELY fun.
I hope you'll try for yourself.
Thank you
_________________________________________________
CRAFT SUPPLY USA WEBSITE
woodturnerscatalog.com/
VICMARK VM120 CHUCK
woodturnerscatalog.com/produc...
MOFFATT WORK LAMP
woodturnerscatalog.com/produc...
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lath...
STEINERT WEBSITE
drechslershop.de/en/?sPartner...
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/i...
SCRAPERS - neureiter.idevaffiliate.com/i...
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/i...
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/i...
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/i...
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/i...
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/i...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy

Пікірлер: 99

@jackthompson5092 25 күн бұрын

Very beautiful platter Tomislav. Great idea for using left over paint.

@markduggan3451 22 күн бұрын

That has given me something to think about.

@norm5785 25 күн бұрын

Thank you for sharing your awesome bowl technique with paint. Love it. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia

@tomislavtomasicwoodturning 24 күн бұрын

Thank you

@seamusday1964 21 күн бұрын

I love this channell! Always brilliant ideas and clear instruction Thank you TT

@tomislavtomasicwoodturning 20 күн бұрын

Awsome to hear that ☺️ thank you very much

@Trashed20659 25 күн бұрын

Great centerpiece to hold a bowl of flowers, etc. Love the raised pattern giving the piece texture. You must have an interesting stripe on your ceiling, Tom.

@tomislavtomasicwoodturning 24 күн бұрын

Didn't reach celing however I have most beautiful dust hood cover now😄

@johnnyb95678 27 күн бұрын

Really cool idea. I will have to give that a try. Thank you for the great instruction.

@colinwatmore7041 25 күн бұрын

Another great technique for something different, thanks Tomislav. Boy, am i gonna get dirty!

@stevenhansen8641 27 күн бұрын

Very nice Tomislav.

@johnlambert5674 25 күн бұрын

Thanks for the inspiration Tomislav, I love your enthusiasm and easy explanation. 👍.

@tomislavtomasicwoodturning 25 күн бұрын

Thank you John

@danderson2930 26 күн бұрын

I was surprised how much I was sucked in by this. Loved it.

@tomislavtomasicwoodturning 26 күн бұрын

Thank you

@Pipejawood-Woodturning 27 күн бұрын

Tomislav that is realy beautiful. We will try this also. Thank you for sharing!

@tomislavtomasicwoodturning 27 күн бұрын

No worries, look to see your version

@mootnmike 27 күн бұрын

May the force ( centrifugal. ) Be with you.., lovely work.

@tomislavtomasicwoodturning 26 күн бұрын

Much very thank you (bad Yoda impression)😅

@greggerstner5599 26 күн бұрын

Until very recently, I have mostly ignored ogee bowls. Your thoughtful design layout results in a very nice profile and I will recommend this video to anyone wanting to explore this shape. Many just slap this curve in by eye and it often doesn't work. Another excellent video.

@tomislavtomasicwoodturning 25 күн бұрын

Thank you Greg☺️

@stevescott8655 25 күн бұрын

Gorgeous! I'll have to try that technique. 😲

@ELRas53 23 күн бұрын

liked your ogee tip!

@markwoodcock01 26 күн бұрын

FANTASTIC… thanks Tomislav. 👍🏻

@tomislavtomasicwoodturning 25 күн бұрын

Thank you for watching

@douglasboland7956 23 күн бұрын

I'm definitely going to try this, I have plenty of leftover paint. Thanks for sharing!!

@krperry2007 26 күн бұрын

Really like the shape

@robertreihsen9096 27 күн бұрын

A real fun video. Thanks Tomaslav!

@drawingisfun3564 27 күн бұрын

LOVE THE TEXTURE. Very creative and artistic yet not overpowering. Thanks for another inspiring video Tomislav!!!

@tomislavtomasicwoodturning 26 күн бұрын

Thank You for watching 😀

@tonyturnswood 26 күн бұрын

"useless rim" that made me chuckle... I know it's useless, but I tell my customers it is decorative... 🙂

@tomislavtomasicwoodturning 26 күн бұрын

Me to 😂

@c.a.chambers68 27 күн бұрын

Wow would love some picture frames like your previous video with this effect - hmmm 🤔 thinking session coming up for me 😊

@tomislavtomasicwoodturning 27 күн бұрын

Indeed, those should be really nice

@jimmyc.277 27 күн бұрын

Very beautiful and a good idea as well. My left over paint cans have a good use now. Hey I see the Bowlsaver Max4, when will it make a debut? Love your work Tomislav. 👍🏾

@tomislavtomasicwoodturning 26 күн бұрын

Thank you, unfourtually max 4 (mine) has production fault so still waiting to see what will happen, but I did test it out and I much more prefer McNaughton coring system

@MikePeaceWoodturning 26 күн бұрын

I like your description of how to get the ogee shape. Interesting coloring technique. Turned out nice.

@tomislavtomasicwoodturning 25 күн бұрын

Thank you Mike, Its Jimmy Clewes ogee tehnique, and it works great😀

@NianticRiverWoodcraftingChrisN 26 күн бұрын

Love this technique. I also have a bunch of old have empty cans to use up!

@123johnp123 27 күн бұрын

Cool! it looks like an iris in our eyes. If the center portion was black, it would look even more like an eye

@tomislavtomasicwoodturning 26 күн бұрын

That is accually a great video idea 😀

@jorisdemoel3821 27 күн бұрын

Very interesting effect. Thanks for another educational and entertaining video.

@racheldray1057 24 күн бұрын

That was a really great fun video, such a cool effect. Your advice at the end about the sealer was very helpful.

@tomislavtomasicwoodturning 23 күн бұрын

Thank you for feedback and glad to help out ☺️

@lukafilm 27 күн бұрын

First time I saw this! Amazing! 🎉🎉

@brycegenevaostler9359 26 күн бұрын

Interesting way to use up ones left over spray paint

@bobwebberkc 26 күн бұрын

Wonderful but really I learn so much from you my head hurts. 🥴😝

@tomislavtomasicwoodturning 25 күн бұрын

Ohh no, then I need to stop Asap😅

@fern6114 12 күн бұрын

Great idea…subscribed 😊🍺🇭🇷🇱🇺

@tomislavtomasicwoodturning 12 күн бұрын

Thank you,I really appriciate that

@anitabier2114 24 күн бұрын

I love this! Thanks for sharing

@DiggaTheWolf 25 күн бұрын

Lost for words, it’s stunning. Need some old spray paint now 😊

@tomislavtomasicwoodturning 24 күн бұрын

Thank you

@user-nr3ti3xp9h 27 күн бұрын

Fun. Something new to try

@SpunbyGreenJeans 27 күн бұрын

Those are fun to do!

@marmotwiyaka136 27 күн бұрын

That was very enjoyable, thank you.

@randycosgrove3608 27 күн бұрын

That looks like fun. Never seen that technique before. Got to try it! Thanks!

@tomislavtomasicwoodturning 26 күн бұрын

Thanks,its a lot of fun☺️

@MarklTucson 26 күн бұрын

Very cool that turned out great! Appreciate the tips throughout the video

@tomislavtomasicwoodturning 25 күн бұрын

Thank You for watching

@paultant6741 26 күн бұрын

Lovely looking piece

@DavidBird-uu8km 26 күн бұрын

Very different,thanks for the information.

@jayscott306 26 күн бұрын

That turned out beautifully. I'm going to say that this is one of the better examples I've seen, Tomislav. Usually I'll look to Stewart Furini for embellishments. I think I want to see you do more. I didn't realize spraying on the center was the most effective place. I thought the wavy lines of the paint were interesting at times. I think they showed the acceleration of your lathe like a sine wave. Anyway, I better get into the shop and make my own work.

@tomislavtomasicwoodturning 26 күн бұрын

That is cool video , sine way turning 😅

@weltfrieden4122 27 күн бұрын

Tolle Erklärung und wunderschönes Ergebnis 🤩

@tomislavtomasicwoodturning 26 күн бұрын

Thank you

@boooshes 27 күн бұрын

Good stuff

@turningwiththewoods 27 күн бұрын

Very nice.

@gregdownunderinOz 26 күн бұрын

Great little fun and interesting project Tommy. Thanks. , when using scrapers on inside of bowls, particularly smaller bowls where you can’t get tool support inside bowl. How do you prevent catches, what shape scrapers do you use for insides of bowls. Can you explain how to successfully use shear scrapers on insides of bowls and boxes please. I had a catch the other day which ended up snapping an m2 HSS scraper. It snapped at the tool rest, I was scraping with about 40mm tool overhanging. Bottom of bowl scraping. Wood was Gidgee one of the hardest timbers in the world. Bowl stayed on chuck luckily. Thanks, Gregory from down under in Oz

@tomislavtomasicwoodturning 26 күн бұрын

Hi Greg, sorry to hear that, That is excellent topic for video, is it ok to mention you in video as well? Love that topic so you can expect the video on this next in line. Hopefully it will be better to show you rather then explaining 😀

@gregdownunderinOz 26 күн бұрын

No problem tommi Look forward to seeing that video

@stevehood10 27 күн бұрын

I've been wanting to try a rim decoration like that for a while now, you've finally given me the kick in the tail to get me started. Do you actually use your breakfast bowls to eat out of? cereal and porridge etc? Do they clean up OK? Another great video, thanks again. And many thanks too for the Ogee how to.

@tomislavtomasicwoodturning 26 күн бұрын

Glad to hear that 🤗 Ohh yes, not just breakfast bowls , salad bowls,plates etc. With this spray paint ,I would only coat outside but it wants to fleck over,so I switch to amerikana outdoor acriliq paint. It can be washed and it will stay like new.

@davidbaxter5132 27 күн бұрын

I love the idea, what a stunning effect. Thank you for sharing with us, Tomi.

@tomislavtomasicwoodturning 26 күн бұрын

No worries, thank You for watching

@jrneff9773 25 күн бұрын

a work of art. is it food safe ???? was that dry maple

@tomislavtomasicwoodturning 24 күн бұрын

Very dry maple and its not usefull bowl in terms to eat out of but you can put on the table for fruits or something similar.

@jcly2 24 күн бұрын

Is the Americana outdoor a spray paint? I can find it in a bottle, but not a spray can. Thanks!

@tomislavtomasicwoodturning 23 күн бұрын

OnlY bottles I think but if I'm not mistaken,you could spray it. But don't quote me on that

@michaellionart4841 25 күн бұрын

I like it but is the paint food safe? Thank you

@tomislavtomasicwoodturning 25 күн бұрын

Any paint is food safe after few months curing, however I switch to amerikana outdoor acriliq paint as its durable and it does not flake off.... Bear in mind that I use paint on outside, the bowl part where food gets is finished with food safe oil

@terrysmith3729 22 күн бұрын

like all your videos. I would like for you to name the wood you are using. I would be helpful for beginners.

@tomislavtomasicwoodturning 21 күн бұрын

Thank you very much, I think I said through video that is maple, I think 🫣 Thank you for watching

@johnwhitteron5296 27 күн бұрын

WasI the only one yelling..."Less is more!'...? 🤣😂

@tomislavtomasicwoodturning 26 күн бұрын

Its hard to stop,😅

@johnwhitteron5296 26 күн бұрын

@@tomislavtomasicwoodturning 😂 It actually ended up looking great. Can't wait to try it.

@MM-dz9bv 25 күн бұрын

Hi Tomislav, congratulations on your channel and your works. Can I ask you for an opinion? I would like to buy a midi II plus lathe, how did you find it? I saw that after a short time you bought a better one, did you have any problems with the midi? Would you recommend it to me as a beginner? Thank you.

@tomislavtomasicwoodturning 23 күн бұрын

Hello hi Yes I would reccomend it, I'm considering to maybe buy it again or smaller one for teaching purposes or travel. Its a good lathe for the size and motor is better then on competitions.

@MM-dz9bv 23 күн бұрын

@@tomislavtomasicwoodturning thanks Tomislav, i will buy it!

@SamNParker 27 күн бұрын

centrifugal?

@theretrogeek2281 22 күн бұрын

Nice just for curiosity what grit CBN Wheel you use for grinding the tools? They are implacably sharp tools

@tomislavtomasicwoodturning 21 күн бұрын

I use b97 code cbn, manufacturer says its 120 grit but some other sites tells its 180. My goal is to get 80 grit

@theretrogeek2281 21 күн бұрын

@@tomislavtomasicwoodturning Ok thanks for the reply,very sharp tools..👍🏽

@jonlanier_ 25 күн бұрын

What is that white oil you used? What product would that be in the United States?

@tomislavtomasicwoodturning 24 күн бұрын

Hmm not sure what that would be in USA but some oil manufacturers have oils they call transperent, that is basicly oil with white pigment in it to prevent yellowing

@Unownerdead 26 күн бұрын

Very cool! I might have to try this. I think I'd build a four-sided box first to capture the paint spray in all directions and keep it from getting thrown into my shop.

@tomislavtomasicwoodturning 26 күн бұрын

Cool idea,good luck and thank you for watching

@user-zu8sf5fc8h 26 күн бұрын

Centripetal force according to Physics no such thing as centrifugal force!

@greggerstner5599 26 күн бұрын

You can refer to the inertia of the paint as a kind of force. Centrifugal "force" doesn't exist without such inertia or moving mass, compared to say, gravity, which is a force that exists on it's own whether or not it's affecting an object. But in common usage, centrifugal force is a thing that we can relate to.