Learn how to rough and finish a pocket using Mastercam X7.
Пікірлер: 38
@chuancai82385 ай бұрын
It's great video! I'm learning MasterCam 2023, it's still useful! One question: any change in parameter, can be demonstrated on the result during validation, which will be great to understand each parameters meaning.
@bobbytriplett64434 жыл бұрын
Tom That was a great illustration, very easy to follow.
@tobyhummel65698 жыл бұрын
Thanks for the knowledge , I'm a lathe and Swiss guy . Thrown to the fire of the mill so your a great help with finding where things are located . Thanks again
@TomStikkelman8 жыл бұрын
Thanks for the feedback Toby.
@jefftylicki19795 жыл бұрын
Thank you Tom. Your Mastercam videos are very helpful
@jimjam17196 жыл бұрын
great instruction. i really love this mastercam stuff. i would like to make new friends that are masters at mastercam. current student but would like to get my foot in the door somewhere.
@franks51284 жыл бұрын
Vy nice usefull one thank u sir
@suryaarya44904 жыл бұрын
Very good teaching
@VM-165 жыл бұрын
thank you Tom .Your share videos very helpful for us.
@elijahchannel57375 жыл бұрын
tnx for the video sir tom,,,,very clean explanation..hope to see your next video
@TomStikkelman5 жыл бұрын
Thanks for that feedback Elijah. I appreciate it.
@charaftali55015 жыл бұрын
Tks
@ke018co16 жыл бұрын
thanks for video especially like the way you go inti detail regaurding parameters and what some of the different parameters actually mean thanks
@TomStikkelman6 жыл бұрын
Thanks for the feedback Kevin.
@MrTimmmers3 жыл бұрын
Nice and clear, thanks
@dahaldipak8735 Жыл бұрын
very useful video 💖
@krishj80114 жыл бұрын
Thanks... good explanations
@TomStikkelman4 жыл бұрын
krish J Thanks Krish J.
@kooroshhaziny89926 жыл бұрын
Thank you so much for the video.
@nenny5956 жыл бұрын
very helpful ,thank you much
@sumanthapa6656 жыл бұрын
Hello, thanks for some of the best tutorial, simple to learn. Please, how can we edit sketch if we made some mistakes and realize after the whole part is ready. Thanks
@different_video4297 жыл бұрын
Thanks it is really great job
@saadidineshreddy63435 жыл бұрын
Thank you bro
@MikeJohnson-qp3sh7 жыл бұрын
Did you have to highlight all entities to x form move to origin? On the X* and later versions you just hit X form origin and select the corner
@nchuaco5 жыл бұрын
Thank you Mr. Tom. Can you help me to down load the mastercam software. I want to make drawing in my computer.
@Cmtb1255 ай бұрын
You have to PAY for software. You can’t just download it. Unless you know some specific people.
@funtimebill8 жыл бұрын
Can you explain how its possible to do an open ended pocket? I cant get a end mill to start the cut from the side of the part. It always begins at some point in side of the geometry of the part.
@sjdarlak8 жыл бұрын
Tom, thanks for the video. Is Mastercam is the best offline programming software to learn? I am beginner here and I am thinking which cad/cam would be most all-purpose one and is not too difficult to start with? If it is then which version you would recommend to me?
@TomStikkelman8 жыл бұрын
I have used Mastercam for 12 years and find it very powerful and user friendly. I have used it to write mill and lathe programs and also multi axis programs. Also a very strong software for 3d contouring. I personally highly recommend it. Thanks
@sjdarlak8 жыл бұрын
Thanks for a tip and your educational videos :-)
@thiruvannamalaichandru86226 жыл бұрын
Thankyou for so mach for video
@leandromunizgoncalves22287 жыл бұрын
Amazing.
@tomyjimenez7 жыл бұрын
Hi Tom my name is Tomas there is Master cam X5 out there for downloading but its a copy, so my question is if this copy of master cam, can be used with out issues? just like a licenced copy of Master Cam or whats the deal? if you or anybody can answer that asap, would appreciate it thanks