Tongue and Groove Accent Wall

No video

Tongue and Groove Accent Wall - Part 3

Рет қаралды 42,045

Күн бұрын

This part 3 of our tongue and groove accent wall and focuses on nailing the boards properly to the wall. I'm using a Bostitch finish nailer ( amzn.to/3chIRMg ) with 15 gauge finishing nails.

Пікірлер: 11

@illestk24civic 3 жыл бұрын

Thank you for the video, very useful knowledge, am doing my bathroom walls as i don’t want to go through the hustle of removing old wall paper

@diydads2535 3 жыл бұрын

Glad you liked it. Good luck on the project!

@teaproductions7047 Жыл бұрын

Perfect video - exactly what I needed before I started my job. Thank you.

@jlhood79 2 жыл бұрын

Good video. Thanks!!

@dougb8207 Жыл бұрын

Thank you; this is exactly what I've been looking for. None of the other videos I found, showed this critical aspect of nailing the boards on. Some actually shot the nails right through the facing of the panels. Do the nails have to go into studs, or can they just attach to the panel below the one being installed?

@vm.999 Жыл бұрын

Great video

@victoriawaterswaters8805 2 жыл бұрын

Hi , so is it no needed to add wood battons behind it? I guess they do that only in order to level out a wall before putting t and g on. ..and not for any other reason like needing air flow between board and wall?

@diydads2535 2 жыл бұрын

Battons are used to creat a solid nailing surface so the boards can be nailed securely. They can also be used to plumb and level as needed. In my case, I marked the actual studs on the wall and used longer nails to go through the drywall and into the studs another 1 1/2". No additional battons needed.