This is an extremely important adjustment and you explained it very well. Thanks!
@bobbymalta733 жыл бұрын
Thank you.
@bstearn16532 жыл бұрын
Finally makes sense. Thanks!
@74Cosmo744 жыл бұрын
really clear, thanks!
@rudyvtec8 ай бұрын
👍👍👍
@drivinivan3144 жыл бұрын
A super clear explanation, many thanks for the whole series.
@lawrencewinter3 ай бұрын
Hello, thanks for sharing. What's your base setup for a loose track, go some ideas for a good starting point? I've got softer springs, thinner anti-roll bars, more droop and chassis flex maximised. I also adjusted the pills for more inboard toe-out and anti-dive (0.5mm down and out). I also put shims inside rear camber links 2mm for roll center adjustment. Any other ideas?
@alfredomendozajr.5124 Жыл бұрын
Thank you for your explanation. I am using a touring car 21.5 class. Our local track is not too big. We have about a moderate to high grip asphalt and it is outdoor. What in your opinion is the correct droop setting front and rear if the driver is a 9 year old beginner but already knows how to drive?
@liljohn10642 жыл бұрын
I went through the video, but still missed out on what the numeric value of down stop over ride height. I know it's physically noticed from static ride height to when the wheels lift off the ground. I can get a number from that. Right now my down stop is 2mm over ride height front and 3mm over ride height rear. I know this is wrong, but I have no idea how much travel the droop number setting means.
@mikeking36962 жыл бұрын
DO DROOP VALUE NEED TO BE LESS THAN RIDE HEIGHT ? FOR EXAMPLE RIDE HEIGHT 6 DROOP 5.5
@pedmar00724 жыл бұрын
hi. I wanted to know if droop is set before ride height or ride should be set first?
@smashrc1233 жыл бұрын
Doesn’t matter. You set the ride height using the spring preload, not the set screw.
@pedmar00723 жыл бұрын
@@smashrc123 ok.
@markknowles74923 жыл бұрын
What are the implications of running the same droop front and back?
@patrickbeckrc21133 жыл бұрын
What do you mean exactly? Normally you dont run the same droop values front and rear!
@markknowles74923 жыл бұрын
@@patrickbeckrc2113 I had to dropthe rear droop to 4mm but the front is already at that. Does that mean I have to drop the front to 5mm?
@mikeking36962 жыл бұрын
@@markknowles7492 YES..FRONT DROOP NEED TO BE HIGHER THAN REAR DROOP