ToniSport Newsfeed Gearing in RC Cars

Рет қаралды 8,667

Жыл бұрын

ToniSport Expert Patrick Beck talks about the gearing in RC cars and how to calculate and define the final drive ratio (FDR). Learn about this very important aspect in racing and enjoy the video!

Пікірлер: 21

@cosimomarotta9552 Жыл бұрын

Hi Patrick, I am glad you said there is no difference between big and small pinion if the fdr is the same. Happy to hear a myth of rc busted. The only reason to always choose a big pinion is to have a better engagement with the teeth of the spur. Especially with 64dp module, a smaller difference in diameter between pinion and spur, makes the contact safer and less prone to wear or strip under stress.

@kieranvirgo9797 Жыл бұрын

I agree, only other thing if you have a big difference is the position of the motor from the smallest spur/pinion combo to the largest. which can shift your balance a little as the motor can move forwards or backwards by 6+mm. but again is only a slight change.

@Robert-gy4lv Жыл бұрын

Great video clears up a lot of confusion keep the great videos coming

@TheFrankiewong98 Жыл бұрын

Great video as always, Patrick!

@lynx7575 7 ай бұрын

Thank you so much for all videos are so useful and help a lot to understand, easy explanation and well done. Danke ❤

@lawrencewinter 7 ай бұрын

Thanks for sharing

@andydass3437 Жыл бұрын

That was an excellent video. Straight to the point especially on the ‘myth' that some do believe. One of the reason I think might be of use with different pinion/spur but with the same ratio is motor position(aft/fore).

@ToniSport-Newsfeed Жыл бұрын

Exactly. That is what I forgot to say. You can definateley shift the motor forwards or backwards a little bit with smaller or bigger gears in use!

@garysin14 Жыл бұрын

Thank you for sharing useful information,Patrick🙏 especially explains the same FDR with different pinion/spur gear. BTW, this is Gary from HK who u met in TITC 2023.

@ToniSport-Newsfeed Жыл бұрын

Hi Gary, I hope that you are doing fine in amazing Hong Kong🙂 Hope to see you again one day 🙂 Patrick

@chriscalloway8999 Жыл бұрын

Great video, really like the clarity about not worrying about to use pinion or spur for setting FDR. Question though, could you also do a video to expand this thought by including a motor analyzer? There are other video's out there about this, but I'd really like to hear your thoughts on if you use one, and if so, exactly what process do you perform to get the best results from motors, the amps used, gearing, heat, etc

@ToniSport-Newsfeed Жыл бұрын

Hi Chris, I have a Hobbywing Tunalyzer here but have not tested it until now. I never owned a motor tester in my life, so I am not sure if I can do a good video about that topic. But hey: I will try to do that in the next weeks ok? Greets, Patrick

@wayneyates700 Жыл бұрын

👍👍

@dysgenyksallday7944 Жыл бұрын

Could you explain how to determine what fdr for a specified track in terms of length of the straight away, Or track layout. I havent been able to find very much information on it.

@idronecharpifpv89 Жыл бұрын

Hey Patrick, what about the Temperature of the motor with the FDR with different gears?

@ToniSport-Newsfeed Жыл бұрын

I never had any differences as long as theFDR stayed the same! Because: Why should it get hotter or colder with smaller or bigger gears (when you change both). The Motor has to do the same work when the ratio stays the same! Temperature only can change when you change only the size of pinoin OR spur!

@idronecharpifpv89 Жыл бұрын

@@ToniSport-Newsfeed ok than you for the explanation! I really like your channel.

@ToniSport-Newsfeed Жыл бұрын

@@idronecharpifpv89 thank you for your kind words!