Pre-soak your toilet paper in soapy water so you don't need to wash your hands after wiping.
@richardclark.7 ай бұрын
i just wash my hands BEFORE going. that way my junk never gets dirty and i dont have to do it later.
@lycan64557 ай бұрын
😅, Are you sure
@TheJunglecrab7 ай бұрын
LMAO
@borisgulliver49707 ай бұрын
@@richardclark.??? But you have dung on your hands !!??
@hellbent70667 ай бұрын
@borisgulliver4970 just drink a bottle of soap so you'll have clean poop. That way you don't have to wash your hands.
@Agent_Foxtrot6 ай бұрын
Protip: don't hammer your screws in.
@donf37396 ай бұрын
Normal thinking, but did you notice that none of them split the wood, even that close to the end? It must have to do with breaking the wood's fibers, rather than pushing them apart.
@4kwalkgaming646 ай бұрын
@@donf3739❤❤
@one1blue6 ай бұрын
I knew I was doing something wrong.
@mohananpn98576 ай бұрын
@@donf3739😅😅😅😅😊
@user-dl1zm2pn3b6 ай бұрын
Шуруп забитый молотком держится лучше чем гвоздь закрученный отверткой
@user-sm3yk9ib4y4 ай бұрын
Правильно ! Забитый молотком шуруп , держаться гораздо лучше , чем завёрнутый отвёрткой гвоздь !😅👍)))
@pavipavixx279918 күн бұрын
😂
@mariakuhn-gressel101216 күн бұрын
?
@user-ju6px6ti8k3 күн бұрын
С языка сняли! 😂
@artem_buki3 күн бұрын
Дичь из интернета!
@user-jp7hp1jz5v2 күн бұрын
@@artem_buki я это знаю с восьмидесятых, интернет тогда не был распространен
@adrianbermudez63294 ай бұрын
Im gonna throw my screws in the oven tonight so i dont have to heat them tomorrow, time saver
@BlueBunny5312 күн бұрын
Also make sure to NOT screw them all the way down tonight so you don’t have to not do that to borrow also.
@CrotchFires695 ай бұрын
Use a rake to dig a hole in your yard. This keeps the shovel clean.
@profileone56555 ай бұрын
Fasho
@jakespivey37165 ай бұрын
impeccable logic, thanks
@MP-vf8qz5 ай бұрын
It's probably more effective too.
@guysumpthin29745 ай бұрын
Alway pee in the shower, so that your feet can absorb some of the pee , and the time you save can be spent shopping for new shoes . You’ll need them
@liladharmeshram3285 ай бұрын
zeee rfgerfgeuw
@tonygoshive7857 ай бұрын
Next video: how to paint your house with a pressure washer
@manfredwwise7 ай бұрын
I actually want to see this
@BillySBC7 ай бұрын
Then "How to levitate with a pressure washer".
@franparent-rs4pe7 ай бұрын
Nice
@waldolemmer7 ай бұрын
Garage54 painted their car with one and it turned out well
@GaryWamboldt-zg7tw7 ай бұрын
Oh OK....when you want it done?
@dawnmitchell82133 ай бұрын
Usually I learn something new watching videos. Apparently I’ve been using screws wrong my entire life. I’m going to take this new profound knowledge to my foreman so he’ll be super impressed with my new abilities.
@beatakozlowska27198 күн бұрын
Oh, yeah. 😂
@guy20065 күн бұрын
Its been 3 months, are you running the company by now? With the tips from these videos, im sure you are.
@oleksandrshutyuk97592 күн бұрын
Чувак, це просто вершина сарказм 👍
@user-ns2ey4er9xКүн бұрын
Hope all the framers start doing this for new houses.
@pwynnnorman4 ай бұрын
I read through all of the replies. THANK YOU SO MUCH, FOLKS!!! Y'all are always soooo much more entertaining than the videos are!!!
@Dero88Ай бұрын
But please pause the vid when watching.. We dont need to give this more views.. And here i am, commenting instead 😳
@jackolantern61725 ай бұрын
Friendly reminder: 80% of the stuff on the internet is garbage for clicks
@oruka23545 ай бұрын
言いたかったことを言ってくれてありがとう。
@DonTrell5 ай бұрын
And dumb methods that actually have draw backs that's why they're not common but people comment to point it out adding to it's rise in visibility. So annoying
@usersame15 ай бұрын
@@DonTrellexactly that’s why when you go into construction sites and you will never see anyone doing these because it’s garbage and there is a reason why they don’t do it.
@Jackrabbitt2475 ай бұрын
But he's actually accurate here brother, you're right as well tho
@anothergamingchannel26564 ай бұрын
Friendly reminder: about 84.75% of statistics online are completely made up
@agustingonzalez38787 ай бұрын
A screw holds to wood better than a nail because the threads grip the wood. If you hammer it in, the threads rip out the wood they would otherwise have gripped.
@jmmmnliberal82747 ай бұрын
I Like drilling a very tiny pilot hole first so I don't split the wood
@drbass96777 ай бұрын
@@jmmmnliberal8274if you run your impact in reverse to start the screw you don’t need a pilot hole.
@alexxu30047 ай бұрын
@@drbass9677 still need, especially harder wood
@markfrost27077 ай бұрын
thats whast he did..you can see it@@jmmmnliberal8274
@jasonroberts97887 ай бұрын
screws also snap where as nails bend. Any movement and snap.....
@wvp074 ай бұрын
🙄 What really sealed it for me was pulling out the impact driver after hammering in screws.
@adamjames1375Ай бұрын
It's a drill...but yeah.
@franko857219 күн бұрын
Fr. Like if you had the ability to screw the screws down, why did you hammer them?
@steadholderharrington90354 ай бұрын
Next video up: How to paint your whole house using buckets of paint and explosives - Mr. Bean-style!
@pierrelabounty9917Ай бұрын
Wonderful! Lol.
@chimrichalds14225 ай бұрын
I love the washer that became a washer.
@mavamQ5 ай бұрын
Ya, I do not see the advantage.
@timothy46645 ай бұрын
Seriously.. I hate this fake crap
@Fighter4Street5 ай бұрын
@@mavamQ I agree, I was thinking the same at the time, what advantage does that give you.
@calvinsallee5 ай бұрын
@@Fighter4Streetmaybe if the nut was welded to it you could use that as a re usable ancor point but as it was it was poointless
@sylvanbrowne46905 ай бұрын
Actually that DIY washer is an actual fixture that you can buy at a hardware store, it's true purpose I can't fully recall at the moment but what I do call is that the 2 prongs burrows into the material and lock the washer in place which eliminate slipping or rotating of the washer once it sinks into place and then you have a washer that stays in place and doesn't falls off or rolls away whenever you have to unfasten the bolt and nut 🔩 to take the thing apart again‼️
@billdefranza49277 ай бұрын
I like to boil all the hot water I'll need for the week on Sunday to save time; then I keep it fresh in the freezer until I need it.
@heavenlyking83866 ай бұрын
Fresh frozen I see.
@ecv806 ай бұрын
😂
@ecv806 ай бұрын
Pro tip
@justice_13376 ай бұрын
If that is your fresh water for the week then that would actually make sense. 🙃
@fireguyhoseman59756 ай бұрын
Lmao 😂
@__13__4 ай бұрын
Забитый шуруп держится лучше, чем закрученный гвоздь 😅
@stephenfennellАй бұрын
Pro tip: Wash up crockery and cutlery three times. Saves washing up for the next three days.
@danb38885 ай бұрын
When all you have is a hammer, everything looks like a nail.
@wolvie50325 ай бұрын
Except he used a drill to finish them in
@vlada6315 ай бұрын
😂👍👍👍❤
@AgnaldoBartho5 ай бұрын
no patience.
@amisfitpuivk4 ай бұрын
I don’t get it. He already had the drill, just use the drill. Now 95% of those screws have no threading
@Cantbuyathrill4 ай бұрын
Nice.
@devanworkman87457 ай бұрын
If you ever feel useless just remember this guy exists.
@blackdog29947 ай бұрын
Yeh but what's he doing in the White House😱
@carlosvillamaralonso69797 ай бұрын
Jajjajaajajjaj
@bsvenss27 ай бұрын
Well, he has 7.41 million subs so... I guess he makes more money than you.
@user-nc6nq2pt8q7 ай бұрын
Но пару витков всё же будут держать!😁
@kimosarbee30077 ай бұрын
@@bsvenss2 it's fascinating to watch the mentally challenged trying to perform simple carpentry
@stevenhall90092 ай бұрын
Hammering a screw in, rips through the fibers of the wood making it a weaker hold. Screwing it in cuts a channel into the wood fibers creating a stronger hold.
@MMAAllDayEveryday12 күн бұрын
Pro tip: Use a 4lb hammer when hitting in screws.
@JackofAllMinistries7 ай бұрын
Lesson from video: There are lots of ways to trick idiots into thinking you know how to do something.
@rocket55575 ай бұрын
Tell me you’ve never worked construction without telling me you’ve never worked construction.
@kingspeechless16075 ай бұрын
I have never worked in construction (but I have worked in building; I'm English! )
@charlieb60015 ай бұрын
As a carpenter with 40 years site experience I've sadly witnessed plenty of chippies hammering in screws like this, usually without pre-drilling. Result: split timber and skewed screw heads. Tastey.
@omnomgamer86335 ай бұрын
@@charlieb6001 why would you ever hammer screws though?
@charlieb60015 ай бұрын
@@omnomgamer8633 Because guys think it's quicker; either they're on price work or they just can't be bothered with drilling a pilot hole and screwing. It's a pity someone didn't invent a cordless electric drill to make it easier.
@omnomgamer86335 ай бұрын
@@charlieb6001 ah ok so theyre just lazy and dont think about any real solution to the problem so they just wack it.
@user-yo3sz8xe2s3 ай бұрын
For screwing into the edge of plywood, use pilot holes.
@tonydavies351117 күн бұрын
Avoid wear and tear on your internal combustion engine, by pouring fuel straight down the drain at the garage.
@Justpeach-sx5mj5 ай бұрын
I think I lost brain cells watching them hammer the screws in
@user-vq5ym5dh7k4 ай бұрын
В России есть поговорка. Ты ее понимаешь, когда попадаешь на срочную службу в армию. Квадрантное катаем, а круглое носим.
@PublicHealthAdvocate4 ай бұрын
@@user-vq5ym5dh7k Peace for Ukraine. Boycott Russia. Peace for Palestinians. Boycott Iz.
@themoravianeagle32154 ай бұрын
@@PublicHealthAdvocate get help!
@fourierrocket4 ай бұрын
Just wait until he screws the nails down
@johnmachter404 ай бұрын
@@user-vq5ym5dh7ki dont understand after translation 😅
@TMJ325 ай бұрын
I'm constantly finding that my washers don't have enough spikes on them. This changed my life.
@cmplays72294 ай бұрын
Why the hell did I read this comment in the voice of claptrap?!
@JamesMason88813 күн бұрын
He effectively made t-nuts. But why not just buy them?
@krislink17617 күн бұрын
@@JamesMason888 no he kinda just made a permanently mounted washers. If the nut was welded to the washer, there would be a point. Just put the washer on as it was. Cutting made no mechanical advantage
@nickjgunning3 ай бұрын
Things my father used to do. He was a shipwright and later a design-technology head of department. I have furniture where drawers slide effortlessly, no matter how full, where everything is secure, but all based on traditional joints- only screws holding on the hinge. Tenon joints and blind tenons, dovetail and concealed dovetails.
@Edwardkenway34 ай бұрын
Personally I only use hammers I don't use drills, screwdrivers, wrenches, forks, spoons, knives, plates, bowls, and cereal I eat hammers off a hammer with a hammer I brush my teeth and hair with a hammer
@user-eo4ti4ve8j4 ай бұрын
how on earth do you wipe your ass?
@Edwardkenway34 ай бұрын
@@user-eo4ti4ve8j it's painful but with a hammer my toilet is made of hammers
@mikeaninger73885 ай бұрын
Pro tip: you can keep the garbage can clean by not putting garbage in it.
@lonniepoet2 ай бұрын
I do this with my refrigerator by not putting food in it. Never have to worry about cleaning it.
@vilysetkaforever53537 ай бұрын
A screw driven in with a hammer holds better than a nail driven in with a screwdriver.
@monicadaniels7847 ай бұрын
Is that Plato or Socrates?
@BluntforceJ7 ай бұрын
@@monicadaniels784 Confucius
@monicadaniels7847 ай бұрын
@@BluntforceJ Yeah, that's why I asked? lol
@Poghuiro7 ай бұрын
Wise words
@vilysetkaforever53537 ай бұрын
@@monicadaniels784 Archimedes😂
@johnmcguire5594Ай бұрын
All right, that’s pretty cool you built a lock washer you heated up the screw for the glue going into the plywood nicely done and hammering in the screws was just a slightest touch of a drill nice
@T-Bag13Ай бұрын
First one is called, an IRISH NAIL.
@Censoredagain78816 ай бұрын
Hammering screws takes every bit of the holding ability away. You are literally stripping the wood away from the threads and the screws abilty to hold away. Never ever do this!!
@Pebbles58635 ай бұрын
I was coming to the comment just to say that watching them hammer screws hurt my soul...
@GeauxGames5 ай бұрын
Also, that had to have pre drilled those holes for the screws to go in like that with the hammer
@anitan1215 ай бұрын
Also, what's the point of hammering them in? It doesn't save any work.
@Girth_5 ай бұрын
@@anitan121it makes more work lol
@DL-ij7tf5 ай бұрын
I always drill a pilot hole for nails but here's the life hack I use a drill bit bigger than the nail.
@easybudda18 ай бұрын
Забивать шурупы молотком гораздо удобнее, чем закручивать гвозди отвёрткой!
@FREEMAN....8 ай бұрын
😂
@user-kx8pv9mk4c8 ай бұрын
Доктор дью
@alexzver17158 ай бұрын
Шуруп забитый молотком... крепче сидит, чем гвоздь затянутый орвёрткой....
@user-ne3yh7dt3f7 ай бұрын
Очень неудобно собирать выбитые зубы поломаными руками.
@biktorfedoseev71197 ай бұрын
@@user-ne3yh7dt3fэто точно когда руки растут ниже пояса
@Acme123454 күн бұрын
Never ever screw or nail into end grain of timber
@ashtongribble2 ай бұрын
I wasn't upset untill you used the drill to finish off the screws
@ARVash6 ай бұрын
The second one isn't because the screw is hot, it's because he drilled a pilot hole
@Matteo-gg9ni5 ай бұрын
Be honest, you tried that!! 😂
@SilverMe20045 ай бұрын
they also don't screw it in as far and use less power
@averagejoe177695 ай бұрын
I was wondering, even saved the video to remember this 😂
@floridafisherman78855 ай бұрын
He also screwed into the edge of plywood, which has no real strength compared to a 2x4 or the face of the plywood
@user-rp7xe8pc2n5 ай бұрын
@@averagejoe17769عقسف
@CJXXxxUnknown5 ай бұрын
I'm not even a handyman, and I certainly am no good with tools, but even I cried a little at the hammering of the screws.
@user-vx8rp3zq5v5 ай бұрын
Шуруп вбитый держит лучше чем гвоздь вкрученный!
@nickkerber11454 ай бұрын
I am literally a handyman, that is my job, and everything this guy did is either completely stupid, or there's already a better way to do it.
@sentientthundertank20794 ай бұрын
😂😂@@user-vx8rp3zq5v
@briandavid78494 ай бұрын
@user-vx8rp3zq5v where did you hear this?
@zyanidwarfare56344 ай бұрын
Honestly, it doesn’t really make much of a difference… it does feel horrifically wrong though, and don’t hammer nails in when building furniture…
@anthonyshapiro8 күн бұрын
The washer hack was pretty 😎 cool
@CubicCreator13626 күн бұрын
This is probably the closest thing we will get to 5 minute crafts
@MZwing-nf3lv7 ай бұрын
Great vid. Shows precisely how not to do things. 🙄
@steveshooter90107 ай бұрын
The last one is good.
@MZwing-nf3lv7 ай бұрын
@@steveshooter9010 Not really. It's totally unnecessary, like other commentators have already pointed out.
@steveestebon20797 ай бұрын
You have no idea what you are talking about
@MZwing-nf3lv7 ай бұрын
@@steveestebon2079 Yeah right. Just like all the other 100 comments that totally agree with me. Every single tip is either totally stupid or totally useless.
@TheTrocolo7 ай бұрын
Blandísima la madera, es más duro un pan...
@AbesShenanigans6 ай бұрын
It's pretty cool that the lighter made a predrilled hole on the plywood
@user-rk8rd8ek4f5 ай бұрын
Смекалка и лошадка в действии 😊
@congotree5 ай бұрын
This is what I was looking for 😂
@og22165 ай бұрын
And he didn’t screw it in all the way
@windestruct4 ай бұрын
Could've been an ultimate level of evil if that money was fake
@jakeworrall72044 сағат бұрын
Its okay to wash your drill in the sink, make sure its plugged in and hoghest rpm, it'll clean in no time 😁👍
@toooooooort96075 ай бұрын
Thanks for the advice, I'm going to twist the nails with a screwdriver
@boogiedahomey7 ай бұрын
Just goes to show: To a hammer, everything looks like a nail.
@edonduayatumba94997 ай бұрын
😊😊😊😊
@edonduayatumba94997 ай бұрын
A
@Fbunch-hm2ni7 ай бұрын
I'd rather be a hammer than a nail 😂
@yasinpektas64937 ай бұрын
. ).
@augaureliusserious7 ай бұрын
Rewatches 'Arrival (2016)'
@beatakozlowska27198 күн бұрын
I am renovating my home just now. For the last 56 years, i was screwing the screws but clearly, i shouldn't 😮
@redf720922 күн бұрын
problem with hammering screws in is that they tend to be more brittle than nails. You could introduce cracks by hammering and weaken them
@silencefiction607 ай бұрын
Predrilled holes are awesome 😉👍
@davidlarson48677 ай бұрын
Yep, saw that
@HidForHG7 ай бұрын
Almost like ALL these 'hack' bs is just faked garbage. With the few vaguely decent ones still being 10x more expensive than just buying it.
@user-up4qc2ks5d7 ай бұрын
Шуруп ,забитый молотком,держится лучше чем гвоздь,закрученный отвёрткой.
@Lucas_27596 ай бұрын
I love how he stops the hot screw before the head splits the wood
@dunjenkeepa5 ай бұрын
yeah looks like hole already predrilled as well if you look closely
@Cobalt1355 ай бұрын
You would never run a screw into plywood edge grain and expect it to hold anything in the first place. Just like running a screw into the end grain of a piece of dimensional lumber in a no no.
@Torque_Lewith18 күн бұрын
Pro-tip: Leave your power tools in water so it sends more power when you use them.
@stephenfennell17 күн бұрын
I never thought of that.
@brianmorgan448511 күн бұрын
Pounding screws with a hammer is the absolute worst thing you could ever do with a screw
@DavidHodgesKU116 ай бұрын
That was really cool how the lighter helped that screw drive into the predrilled hole without splitting it.
@evandroldossantos51015 ай бұрын
Very good
@dirtegarbage5 ай бұрын
I think i see it now lol
@Umbigfella5 ай бұрын
I like the way it wasn't screwed all the way in.
@fastwolfmicro76775 ай бұрын
If you look closely the nail on the left is tilted. To it would split either way. Lighting the right for 3 seconds won't change a thing
@fastwolfmicro76775 ай бұрын
And on top of that. It is also closer to the edge
@mr.z5418 ай бұрын
Now screw in a nail, I'd like to see that.
@Mac_King_cheese7 ай бұрын
😂
@rustem56327 ай бұрын
Поверь, забитый саморез, держит лучше чем закрученный гвоздь 😉😂
@christelsturner78777 ай бұрын
@@Mac_King_cheese😅😅
@haydarius-uw7hh7 ай бұрын
@@rustem5632 nice nuke plan✅
@-Loaiza7 ай бұрын
😂😂😂😂
@romansy5939Ай бұрын
Как гласит народная мудрость: "Шуруп, забитый молотком, сидит крепче, чем гвоздь, закрученный отверткой".
@SlotZofFUN13 күн бұрын
Why not bend the bottom flange by turning the middle section while still in the vise. Great Tips 👍
@craigporch33127 ай бұрын
I wanna give this guy the benefit of the doubt and say he's just trolling carpenters.
@tama-42257 ай бұрын
Ofc he is, did you see the state of that hammer swing 😂
@chrisu70227 ай бұрын
This giy has been repeating these same dumb things for so long now! And who wants to pick up some hot screws
@Generic_Villain7 ай бұрын
He must have a death wish then.
@olegbabak97936 ай бұрын
It should be titled "the wrong way to use hardware"
@sailaab6 ай бұрын
Yup
@RH-nk7eo6 ай бұрын
We're going to have a generation of clueless idiots breaking things thanks to the school of YT Shorts aren't we.
@imsainne64196 ай бұрын
Probably. even though there’s zero hardware in this video
@mikemartin871218 күн бұрын
Pro tip, the heated screw really works but don’t heat it with a lighter.you should put the drill in reverse and pull the trigger, the screw heats up with friction in seconds then put it forward and screw it in without splitting wood.
@stephenfennell17 күн бұрын
I don't follow. How does reversing a drill cause friction in a screw? The shank of a screw isn't in contact with anything until it is in the wood, so where is there any friction on the screw to heat it up? Or am I being dense and this is a joke pro tip?
@jaredR207Ай бұрын
I can't imagine being on a jobsite and ever seeing someone hammering screws into 2Xs or hitting some 3" GRXs with a bic and screwing into 1/2"plywood on the end grain.
@stevej68136 ай бұрын
A washer doesn't need to be anchored into wood unless the nut is permanently attached to it to enable self tightening when turning the bolt only. Otherwise it's totally pointless.
@user-ct7sm9vc7k6 ай бұрын
Great point !
@masoncampos70436 ай бұрын
I was going to comment the same. This whole clip was all wrong
@matthewkilner6 ай бұрын
You could tack-weld it after if you were dead set on making use of it. But then you could weld the nut to the bolt without a washer. 🤷♂️
@djpaulk6 ай бұрын
Let him have his pointless fun 😂
@Ventura7276 ай бұрын
This guy thinks he just invented t nuts
@electronicsandmusic20776 ай бұрын
Next video: how to build a cabinet with chairs and cats
@user-fo4ve5fo4z5 ай бұрын
Buy powdered water then whenever you need water just add water.
@electronicsandmusic20775 ай бұрын
@@user-fo4ve5fo4zbuy reduced air then add air to make air
@duzzitmatter86795 ай бұрын
Wait…your cats know how to build cabinets?? Mine barely knows where to poop.
@londonalicante4 ай бұрын
@@duzzitmatter8679 Your cat has a servant to build cabinets for him. And clean up his poop.
@GT-dh5nkАй бұрын
The first thing I saw was someone hammering screws into end grain, requiring more time spent and an extra tool on hand than if you simply weren't a jackass. This set the stage nicely for what else was to come.
@DarkWildlife999Ай бұрын
The way each nail is hammered is really interesting
@chrisrageNJ6 ай бұрын
Next episode is his wife taking her tools back
@elflingskittensaunders69346 ай бұрын
Lol that was hilarious 😅
@AHt-dj2ge6 ай бұрын
Và Cô ấy nổi cáu vì Bình sữa cho con vẫn đang trống rỗng và nó bắt đầu mếu máu vì đói
@masoncampos70436 ай бұрын
This episode should be titled, Why my gate falls apart in the next episode!
@AresLeviathan8 ай бұрын
That first one is a great way to put screws in...if you want exactly the last 1/8" of screw to actually hold something. Waste of a 3" or 4" screw.
@waltermeeks18057 ай бұрын
Shitty subpar screws at that.
@AlekseyVK7 ай бұрын
Вбитый саморез держит крепче чем закрученный гвоздь.
@geraldocostamessias38947 ай бұрын
Quero ver Vc bater o parafuso deste jeito em uma madeira maciça 😂😂😂
@saiiiiiii17 ай бұрын
I don't even know what that is supposed to be good for😂
@manvelelizabeth9127 ай бұрын
😊 😊😊😊😊
@nelsonm50324 ай бұрын
that lighter trick so the wood doesn't split will come in real handy down the road.. would never thought to do that in a thousand years. thx for that! cheers...
@user-jf1lg1ib3fАй бұрын
Wow. This is a life changing video. It should be adopted in all schools at all levels😂
@TS-yf2zf7 ай бұрын
"That boy ain't right" Hank Hill 😆
@user-bv8it2sh3r7 ай бұрын
Народная истина гласит: забитый шуруп надёжнее, чем закрученый гвоздь!
@jamesadams61054 ай бұрын
This dude defines brings a knife to a gun fight
@Mike-vvwvvwvv13 күн бұрын
Thanks for the tip, Mr. George.😅
@sacredrider5 ай бұрын
The second clip's trick is to drill a hole before driving the screw in. You can't burn a stick with that little fire, let alone heat up a screw.
@joepiazza37564 ай бұрын
Ya. Guy is an Fn liar.
@nathand69294 ай бұрын
I was literally yelling at my screen like just pre drill a hole 😭😭😭
@Fetidaf4 ай бұрын
If you’re doing something quick and dirty you can spin the screw the wrong way for a few seconds to get some sort of proto-pilot hole.
@bradywalker52914 ай бұрын
Homie went slower and probably didn't put a lot of force. Maybe even turned down the setting on the impact.
@user-oc6gr7hs7x4 ай бұрын
Nah cmon dudes, code says 1/4 inch plywood screws inserted on edge should be dipped in kerosene and then heated to at least 540 F. This will kill all of the wood splitter bacteria that causes this. Everyone knows this!!! 😊
@AnupaTop5 ай бұрын
Главное правило строителя: саморез забитый молотком держит крепче чем гвоздь закрученный отверткой😂
@drug.cheloveka5 ай бұрын
Круглое носим,квадратное катим. Всё как обычно🤷
@user-vq5ym5dh7k4 ай бұрын
@@drug.cheloveka Я тебя искал 😂
@konstantinpanov25454 ай бұрын
Аааа, всем Русским это знакомо))))
@greglinski22084 ай бұрын
качественная работа
@CNKilyaoleg4 ай бұрын
Доктор дью...
@stumpbumpers16 күн бұрын
Without threads the washer is just a washer, not matter how you slice it.
@mr.k.i.s.s74966 ай бұрын
Pro tip: the washer is there for a reason
@Reulorics5 ай бұрын
And it's still there afterwards...
@MP-vf8qz5 ай бұрын
👎
@Junebug12285 ай бұрын
It’s still there serving the same purpose.
@BillTolliver5 ай бұрын
It SHOULD be like that to support the use of a lock washer in between.
@danieltx70665 ай бұрын
@@BillTolliverI’ve never had an issue using a lock washer with an uncircumcised washer underneath.
@goaway32356 ай бұрын
Everyone is gangsta until you have to screw a nail. You can nail a screw but you can't screw a nail ~Sun tzu Art of carpentry
@JohnDoe-fu6zt5 ай бұрын
You can tune a piano, but you can't tune a fish.
@DrBooru5 ай бұрын
Watch me lol
@goaway32355 ай бұрын
@@DrBooru why
@goaway32355 ай бұрын
@@JohnDoe-fu6zt 🤣🤣but my comment makes sense on this video
@zoobiewa5 ай бұрын
Speaking of, why DON'T they make nails you can screw in. Or washers you can nail on?
@chicagohoosier14 күн бұрын
For a better securement, screw your screws all the way in, the way they’re meant to be used
@Number1_radio_flyer_fan4 ай бұрын
Pro tip: water your plants so they dont die
@user-oj2ug5ot4h7 ай бұрын
Давно доказано, забитый шуруп держит крепче, чем завёрнутый гвоздь.
@user-hu6jz3qk9o6 ай бұрын
Первое правило плотника😅
@mr.computer37336 ай бұрын
А если, надо будет открутить?
@user-oj2ug5ot4h6 ай бұрын
@@mr.computer3733 Шуруп гвоздодером , гвоздь отвёрткой. Ведь это всем понятно. 😅😅😅😅😅
@gragbogdan50846 ай бұрын
И то и другое ебань, но шуруп то реально забить, а вот гвоздь закрутить отвёрткой. Такое же ебильное выражение, как про цирк и армию.
@minecraftjunky20015 ай бұрын
Man, I've always wondered how I could make sure my screws pull out. Great tip!
@bigball84684 ай бұрын
I feel like this guy is descending into madness, the first clip isn’t even a rip that’s just hammering screws into wood
@RunehornКүн бұрын
the scary part is some people will actually think these are great ideas
@Slava91687 ай бұрын
*ЗДЕСЬ ПОДБОРКА САМЫХ ДЕБИЛЬНЫХ СОВЕТОВ:* 1. Зачем забивать молотком, если можно было сразу закрутить шуруповертом? Держалось бы крепче. 2. Подогретый шуруп никак не влияет на расщепление дерева, вот если бы он его мылом или маслом смазал… 3. Что тебе даёт непроворачивающаяся шайба? На силу крепления это никак не влияет! *НАЖИМАЙТЕ «…» И ВЫБИРАЙТЕ «ПОЖАЛОВАТЬСЯ», «ЛОЖНАЯ ИНФОРМАЦИЯ».*
@user-ne7kz8qy8q7 ай бұрын
Спасибо за аргументированный ответ.
@AxxisSlayer7 ай бұрын
В "Волге" периодически встречаются болты, забитые кувалдой
@user-li2on3lq3c7 ай бұрын
В этом же меню "... " Есть еще один и важный пункт "не рекомендовать видео с этого канала". Да уж, нужно чистить свою ленту ютуба 😊
@gjdewald7 ай бұрын
A heated screw does prevent splitting. The lighter is dumb. Heat the screw by reverse driving it before forward driving it in.
@user-oe3hv2zs6k7 ай бұрын
Смазывание шурупа тоже не повлияет . В остальном согласен
@zatochkatver69186 ай бұрын
Саморез забитый молотком держит лучшие чем гвоздь закрученный отвёрткой! ❤
@user-gj8um4jc2j5 ай бұрын
Гвоздь можно отвёрткой крутить?😅 шуруп да.
@garymericano5 ай бұрын
And either one holds about as well as duct tape
@paulalejo99525 ай бұрын
Así es compañero
@stangowner868716 күн бұрын
Use the battery end of your drill as a hammer to save your hammer from getting any nicks or scratches
@johncorbin53324 ай бұрын
He didn't even tighten the screw all the way down because it probably still would've split the wood lol
@MrWaalkman7 ай бұрын
As my old journeyman used to say, "The slot is only there to take the screw back out."
@Jumbo3448 ай бұрын
The heated screw 🤦♂️🤦♂️🤦♂️ pre drilled and didn’t want head going to far either
@umitsahin2317 ай бұрын
Önceden delinmeden ziyade il vida suntanın kenarında 2. Visa tam merkezde.
@agtronic7 ай бұрын
100% predrilled. What is the point of these videos exactly?
@Jumbo3447 ай бұрын
@@umitsahin231 you what?
@EugePri7 ай бұрын
@@umitsahin231o0
@mikegardner1077 ай бұрын
When it cools it shrinks and is loose.
@WoodWorxGuy17 күн бұрын
Now that’s a REAL ‘split washer’ 😂
@Cantbuyathrill4 ай бұрын
Today's Lesson: "How To Defeat The Whole Purpose of Screws"
@noodlewater38766 ай бұрын
Bro graduated from the McDonald’s ice cream machine 💀
@ATBZ6 ай бұрын
Random = funny
@hangingontheWildside6 ай бұрын
so you're saying you could do better? the hell did he even do wrong? i think the sharp washer screw trick was pretty smart, it reinforces the connection
@ATBZ6 ай бұрын
@@hangingontheWildside nah these hacks are stupid but this guy is stupider
@BreakingNewsOnline5 ай бұрын
Completely cover your laptop with expanding foam to prevent dust getting in it…
@mehere33727 күн бұрын
Oh, man...the next time I decide to be a builder... I'll be so far ahead of the game.
@detroitMC3134 ай бұрын
That last one was as smooth as hell. Someone explain the first one to me. Nailing a screw in??
@Frank-sp7vu6 ай бұрын
Watching you hammer those screws in just gave me a whole level of rage and anger I didn't think was possible😡😡😡
@williamheath84176 ай бұрын
Lmao it’s called idiots, that won’t hold that long 😂
@j.b.phillips88686 ай бұрын
Hahaha same here. They won’t be as secure now. This is a shortcut that is not recommended. I’d love to see Mike Holmes see you do this. He’s snap that board in half and tell u to “make it right”
@RuknaGeraltas5 ай бұрын
Its edited, he screwed them in and cut out these parts out of the video
@madphatdopeyo7425 ай бұрын
What if I said I use vice grips to twist a nail into a piece of wood lol
@kikimbrown5 ай бұрын
Why even use a screw if you're just going to hammer it in anyway?
@user-ky7le9bf2m5 ай бұрын
Drill a hole in a quarter, that makes a great washer and is only about 15 cents more expensive than a real one.
@stinkydog5935Ай бұрын
use 5 cent and save 5
@fsinjin6017 күн бұрын
The precut anchor washers are so much more expensive. *sigh*
@karenkline72216 күн бұрын
Thank you. Maybe if I used some of these techniques when I screwed my fence boards to the posts, the storm wouldn't have blown the boards off.
@SlashRfnR2 ай бұрын
The title should be "shit not to do with your tools "
@natebowman75936 ай бұрын
Don't use a hammer on screws. Most screws are not as flexible as nails are. They'll snap, and break.