I don’t know why I started watching your channel but now I’m kind of addicted. I had to come back and watch the first video to see where it all started. It almost looks like you’ve accumulated the entire tool truck through the years. It’s kinda neat to see the difference between guys that have been out of the game for a few years compared to the guys that are just started or still currently working. The amount of air tools you got compared to the younger or more current guys, everything’s battery powered now. Since watching your channel it has inspired me to start getting my stuff more organized. I’m currently setting up an old craftsman 4 drawer carry around tool box for a “90%” hand tool box. I run a welding/tree service and fix a lot of my own stuff so hand tool work good enough for me when I don’t have the welding rig on-site. I broke my chipper once and had to use a customers tools to strip it down and repair it since I didn’t have my own tools. No more of that. So thanks for making these videos.
@ToolBoxTour8 ай бұрын
Well hey I appreciate you watching. This first video is quite out dated and I need to make a new tour of my setup - it's changed quite a bit. Maybe in a few months I'll have to do that. The tool addiction hits HARD so be careful :)
@virgillidell660122 күн бұрын
I have been watching a lot of your tool videos and I am very impressed with your work. especially this one. Thanks.
@andrewparry85599 ай бұрын
You have got more stuff than most of the tours you have done! Cool setup. Love the channel😊
@ToolBoxTour9 ай бұрын
I’m glad you like the channel! My setup has changed significantly since I add that video. I’ll have to post an updated video. Thanks for watching!
@pharmdog15 ай бұрын
Smartest thing I have seen... First aid in the box! Nicely done!
@ToolBoxTour5 ай бұрын
Thanks!!
@JOHN-fx3xo Жыл бұрын
Oh my. So clean, so nice, and so professional. Well done my friend.
@ToolBoxTour Жыл бұрын
Thanks John!
@niallcosgrove5596 Жыл бұрын
Excellent collection of good tools. And all well used
@ToolBoxTour Жыл бұрын
Thanks 👍
@brando81 Жыл бұрын
Never heard of Toolvault up until a couple weeks ago. Looking online the specs and weight are comparable to a snap-on krl, what an awesome box and value. Man, if I could do it all again lol 🍻
@tylerrobinson615810 ай бұрын
One of the techs that I work with at my shop, has one and has had it for years and loves it.
@valleygrown_dieseltech344411 ай бұрын
44 pc gearwrench wrench set! For the win!
@malcolm31875 ай бұрын
I have a 84in Toolvault box. I've had it for 5 years and it's holding up great.
@ToolBoxTour4 ай бұрын
It’s a fantastic box. I’d buy it again 👍
@claudegiroux763 Жыл бұрын
Wow! Now thats a FULL ! box tour:) dream box set up,congratulations
@ToolBoxTour Жыл бұрын
Thanks for watching Claude!
@vexor7 Жыл бұрын
Awesome collection man, such a stacked setup.
@ToolBoxTour Жыл бұрын
Thanks! I appreciate you watching 👍
@throttlebeholder Жыл бұрын
Love the videos, I do cringe when people say air tools are on there way out. Not a big fan of cordless power tools. Especially knowing that batteries don't last and soon you'll see them getting hacked. I do have cordless stuff but I try to always have manual, corded, and pneumatic too.
@ToolBoxTour Жыл бұрын
Air tools certainly have their place. Cordless tools have just come such a long way, and their convenience is hard to beat. I will always choose a cordless tool first, but you can alway count on it’s air counterpart to meet your needs when the cordless just can hack it.
@ToolBoxTour Жыл бұрын
Also, thanks for watching!!
@christopherelrod8788 Жыл бұрын
Im a big fan of electric. But i dont like frills. Give me all the beans with a variable trigger do they have thier downsides ya. But i find it easier to use elctric than air although nothing beats air for grinders cut off wheels or air hammers
@jefftovani5535 Жыл бұрын
Very nice, love looking in other guys tool box,need to make one myself!!!
@ToolBoxTour Жыл бұрын
Go for it!
@kdtxtooldad Жыл бұрын
Great setup thanks for sharing 💯
@ToolBoxTour Жыл бұрын
Thanks for watching
@samblanche60156 ай бұрын
Enjoyed beng watching i went from top to bottom and have been wrenching since 98 and u always can learn something new... look forward to the future... great job my man! Until the next video
@ToolBoxTour6 ай бұрын
Thanks so much for watching! These earlier videos weren’t super great, but I try to make each one a little better. See you on the next one!
@chryslertechnician3439 Жыл бұрын
Nice box and tools
@ToolBoxTour Жыл бұрын
Thanks for watching!
@coreymartin-wk1fi Жыл бұрын
Huge collection of killer tools I dig it.
@Timkasa82 Жыл бұрын
Great video, thanks for sharing.
@Papa-vq3fv8 ай бұрын
Wow just plain wow!
@Oldtimeytools Жыл бұрын
Awesome tour thanks! I have an 90’d Mac, struggling to get slides warranted sadly.
@ToolBoxTour Жыл бұрын
Thanks for watching this one. My first video ever on KZfaq. Definitely not as fun by myself. I don’t like talking about my own tools anywhere NEAR as much as I do going on tours of other peoples boxes. But I figure some people might like to see it.
@thebackwoodsmechanic5029 Жыл бұрын
Very well stocked setup, good stuff man
@ToolBoxTour Жыл бұрын
Thanks for watching!
@austinleach6968 Жыл бұрын
Box is a mess dude!… Enjoyed the tour 🤘🏻
@ToolBoxTour Жыл бұрын
Thanks for watching!
@cblack1863Ай бұрын
Daaammmn son! Thats a stacked box! I've watched all your other tours before this one and they're extremely well done. You've cost me a lotta $ these past months! I also realize you already know the answer to most of the questions you ask, your asking for our benefit lol. Are those big foam socket sets Snap-on? Thank you for the vid👍
@ToolBoxTourАй бұрын
Thanks for watching! This one is kind of cringy for me to watch since I was so camera shy. I’ll have to do an updated video. Especially since my tool collection has grown quite a bit
@cblack1863Ай бұрын
@@ToolBoxTour...Not at all man, I'm like you, and I get way more excited about other people's stuff than my own! Trust me, you have a sick set up. I'm just getting into the Koken stuff myself and I absolutely love it so far. It's the first time in my life I've felt like I was under-paying for a tool! Lol
@cblack1863Ай бұрын
@@ToolBoxTour Also, not to 'fanboy' yah, but I think you have the best box reviews on KZfaq. Love the clear camera work and the fact that you include price and part #'s so I can more easily spend money on more tools lol. Anyhow! Keep em coming!
@russellpottenger8584 Жыл бұрын
One of the better toolbox tours I’ve seen on KZfaq. Good selection of specialty tools, …. which leads me to my question. As an engine builder I’ve always used Diesel wrist pins to make my stepped freeze plug drivers. Do you have a Snap-on # for your freeze plug driver kit? Only thing I’ve come across are the aluminum adapters for lip seals. Just hit the 👍🏻 and subscribe. Thanks, Russ
@ToolBoxTour Жыл бұрын
The Snap-on part number for the freeze plug set is FP16. Thanks for watching!
@russellpottenger8584 Жыл бұрын
@@ToolBoxTour Thanks so much.
@pomaicarpenter4315 Жыл бұрын
I see some Bridgestone stickers! I work for Firestone currently
@ToolBoxTour Жыл бұрын
Good company to work for 🤘
@bryansenulis7242 Жыл бұрын
Alot of stuff older..did u buy or dad give u there tools and add on to them with yours. I'm quite impressed..think u actually have more tools than me and iv been buying tools every week for 20 years...
@ToolBoxTour Жыл бұрын
I bought many of my tools used. I actually really enjoy working with older tools as long as they work as they were intended. Thanks for watching!
@tonycroteau9264 Жыл бұрын
Awesome setup great video 👍
@markm000025 күн бұрын
You can sell individual taps and dies online and people will buy them to complete their set. I bet you’d make enough to buy an entire new set.
@sandmhoder Жыл бұрын
youre number 1 man i love your vids
@ToolBoxTour Жыл бұрын
Thank you Sam!
@twostroke12v719 ай бұрын
Commenting on the video for the algorithm
@3vil3lvis Жыл бұрын
So many blow molded cases, so many specialty tool kits. How long has it taken you to collect them all?
@ToolBoxTour Жыл бұрын
I was a professional technician for 13 years. I worked on all makes/models. When you work on everything, you tend to collect more specialty tools than when you work for a dealer where you work on much of the same stuff everyday. I bought a lot of the tools I have second hand, so it wasn’t as painful 😅. Thanks for watching!
@discgolfer39204 ай бұрын
I inherited my Father-in-law's tools when he passed and I am trying to figure out what a lot of his tools are. Could you possibly tell me what the red tool just to the right of the exhaust hanger remover is? He was a Diesel Mechanic and I received a Matco 6S 3 bank with hutch and cabinet full of tools along with so many other boxes and tubs of tools. Love watching the tours, I have learned alot already. I am addicted now, I just go through and clean tools and organize them.
@ToolBoxTour4 ай бұрын
Spark plug boot puller
@KenMrKLC Жыл бұрын
Wow that’s a lot of quality tools…. I bet if you added it all up you prob over $5000 there! Maybe almost 10k even if you include the box
@KenMrKLC Жыл бұрын
I think if I was to enter the trade I would just drop like $20k and buy one of those huge boxes and fill it with all the best …. Every tool made by one of the quality tool companies like snap on or Mac
@KenMrKLC Жыл бұрын
I think if I was to enter the trade I would just drop like $20k and buy one of those huge boxes and fill it with all the best …. Every tool made by one of the quality tool companies like snap on or Mac
@garageguytools Жыл бұрын
Way more than 5K. Probably close to $30,000.
@joshdane565711 ай бұрын
@@garageguytools yea I probably got close to 5k packed into a tiny husky tool chest with 5 drawers and a bottom cabinet lol. And I don't have much tool truck branded stuff at all. I got alot of the tools from the original manufacturer that some trucks rebrand though. Definitely more than 5k worth of tools in his box even if he bought it all used. Shoot one drawer of his box is probably about 5k
@jeremydoblinger36099 ай бұрын
Way more then 5,000 there..25-30 grand easy
@m.t.v.79343 ай бұрын
Damn! You have a nice collection of tools. I thought you just went around and showed other people's tools and I did not know you have this type of tool collection. Very nice man, I am just getting my tool collection going, I started kind of late in life but I am getting there slowly. I will never own Snap-On or MAC tools because I do not wrench everyday for my job. Harbor Freight is good enough for what I need and do. Thanks for sharing your own tool-box with us. Where can I find that manual impact? I could of used something like that on a job last month and I never knew they existed. On a side note, have you found that the block test fluid has a shelf life? I heard it somewhere but have not confirmed it. I was going to buy the tester and the fluid but now I am holding off on the fluid until I need it just incase it does expire and messes up the test. Have you heard anything about that?
@ToolBoxTour2 ай бұрын
Thanks for watching! This video is a bit cringy haha. I’ll have to do an updated video soon with part numbers and such. Yes I have heard the block test fluid expires. I did a box tour from a tech in Virginia that told me that. He has the black and purple trim box in my catalog of videos 👍
@Txcnc59 Жыл бұрын
i like it alot
@ToolBoxTour Жыл бұрын
Thanks for watching!
@williammickelson4038 ай бұрын
Looks like you could use another full size chest. Lots of tools
@ToolBoxTour8 ай бұрын
I have actually added a 68” EPIQ to this blue Toolvault. I’ll have to do an updated tour soon!
@williammickelson4038 ай бұрын
@@ToolBoxTour awesome!
@jeremydoblinger36099 ай бұрын
Wow!! Your box is stacked..love to see all that wear on em.. also what do you do now for a living? You said your not wrenching now?
@ToolBoxTour9 ай бұрын
I have an e-commerce business now. It’s funny how much this setup has changed even though I no longer wrench. I have added a 68” EPIQ to this and have changed how everything is organized. I’ll have make an updated video at some point. Thanks for watching!
@ranacherian Жыл бұрын
Wonder who make that speaker for matco
@erickawood9120 Жыл бұрын
What is the king of all tools?... The Ruler.
@ToolBoxTour Жыл бұрын
Buhahah!
@sandmhoder6 ай бұрын
18:00 more info on remote starter please and thank you is it a starter tester to bypass ihnition switch ??
@neilmays6744 Жыл бұрын
Great video how do you like the genius double box end wrench set
@ToolBoxTour Жыл бұрын
They are fantastic for the money. Since they are box end, they are plenty strong for anything I need them for. One negative is they are a sharp square handle design so when you apply a good amount of pressure to the wrench, it can be uncomfortable. I only noticed this once tho - I would buy them again. Thanks for watching!
@neilmays6744 Жыл бұрын
Thank you for the reply buddy
@neilmays6744 Жыл бұрын
Where did you pick up that bore gauge
@jamesrahn83396 ай бұрын
Aren't Tool Vault toolboxes the same as Extreme Tools Toolboxes? And how do you like yours?
@ToolBoxTour6 ай бұрын
Yeah I believe they are made by the same manufacturer. I’ve had mine for 7 or 8 years and I absolutely love it. I used it professionally every day for about 3 years and have absolutely no complaints.
@jamesrahn83396 ай бұрын
That's awesome, I have been looking I to getting one. Thanks for the response
@ratchetwise440 Жыл бұрын
Warning" Real mechanic. You can tell by the beam torque wrenches.
@ToolBoxTour Жыл бұрын
Thanks for watching!
@neilmays6744 Жыл бұрын
Those valve keeper removal tools are they for any make of heads and who makes them?
@ToolBoxTour Жыл бұрын
Lisle 36050. Quickly Removes and Installs Valve Keepers On Most Overhead Valve Engines With Valve Stems From 4.5 to 7.5mm and 5/16" to 3/8". 👍👍 Thanks for watching!
@valleygrown_dieseltech34444 ай бұрын
Who makes the sockets in foam?
@ToolBoxTour3 ай бұрын
Those are a big craftsman set
@OneManOnFire Жыл бұрын
What is the name of that extension you use with a hammer at 14:14
@davidadkins809Ай бұрын
Would you recommend the tool vault elite 84
@ToolBoxTourАй бұрын
Absolutely. Fantastic value and an amazing toolbox!
@davidadkins809Ай бұрын
Thank you I'm diesel mechanic, and been looking because I don't see throwing 40k on a box
@lochaberryan5 ай бұрын
i feel so bereft that you did not open your tap and die sets :( lol
@ToolBoxTour5 ай бұрын
Lol I’ll do another tour in the future. I’ll be sure to open the tap and die sets next time 😅
@brando81 Жыл бұрын
Never heard of Toolvault up until a couple weeks ago. Looking online the specs and weight are comparable to a snap-on krl, what an awesome box and value. Man, if I could do it all again lol 🍻
@ToolBoxTour Жыл бұрын
Value is definitely there. I wouldn’t say it’s quite on par with Snap-on; I would say Matco would be more comparable. I used to have a double bank krl and those boxes are sweet