How To Lube Keyboard Stabilizers (Consistent Results)

Рет қаралды 95,931

Күн бұрын

🛒Products Mentioned In This Video
Durock V2 Stabs:
Krytox 205g0:
Lube Brush: prevailkeyco.com/collections/...
Switch Stem Holder: prevailkeyco.com/collections/...
Gateron EZ Switch Opener:
Regular Switch Opener: prevailkeyco.com/collections/...
Flush Cutters(Amazon - Paid Link): geni.us/flushcutter
iFixit Kit with EVERYTHING(Amazon - Paid Link): geni.us/ProTechToolkit
Keyboard Vendor Affiliate Links:
Prevail Key Co: prevailkeyco.com/?ref=toomuch...
Kinetic Labs: kineticlabs.store/tmt
Case: KBD67 Lite R2
Switches: Gateron Yellow KS3(Lubed With 205g0)
Keycaps: ePBT Miami Nights Cherry Profile(ABS)
Desk Mat: Odin Zero Gravity Alexotos V1
Join the community on Discord and follow me on Social Media!
🐤Twitter: / techkile
📸Instagram: / techkile
🎈Discord: / discord
🕹Twitch: / techkile
🖥My Current PC Build: kit.co/TooMuchTech/tech-kile-pc
🖱Current Fav Gaming Mouse: geni.us/GPSL
🏳My #1 Fav Mousepad - Odin Zero Gravity: www.odinpc.com/?ref=H0Ipi_1kd...
🏳My #2 Fav Mousepad - Xtrfy GP4: geni.us/GP4Pink
⌨Current Fav Gaming Keyboard: geni.us/Origins60
🎧Favorite Gaming Headset: geni.us/9BufiJm
📧Business Inquiries: Kile@TooMuchTech.co
0:00 Intro
0:52 What Tools You'll Need
2:30 How To Remove Clip In Stabs
3:06 Stabilizer Recommendations
4:47 How To Clip Stabs
6:15 Correct Assembly
7:12 Lubing Housings & Stems
8:54 Stab Pads
9:29 Wires & Finishing Up
11:44 Test Before Board Assembly
12:23 KBDFans Screw Ins + Lubed Gat Yellows
12:34 Durock Piano Clip Ins + KTT Peaches
12:46 Outro
-----------------------------------------------------
🎵Lakey Inspired - / @lakeyinspired
SoundCloud: / lakeyinspired
Spotify: open.spotify.com/artist/3zDGj...
-----------------------------------------------------
#HowTo
#Lube
#Stabilizers
DISCLOSURES: All Genius links are tied to our Amazon Associate Affiliate Program Account & Amazon Influencer Account, from which we earn a small sales commission indicated by (Amazon - Paid Link). Also partnered with the Banggood Affiliate & MechanicalKeyboards Partner Programs as well. All sponsored links and comments will contain the word "SPONSOR" or "AD." Any additional revenue stream will be disclosed with similar verbiage.

Пікірлер: 92

@shelly6482 Жыл бұрын

This tutorial is the best because it actually shows you how to remove the stabilizers unlike the other so called tutorials.

@nikitakobtsev 2 жыл бұрын

Exactly what I was looking for! No one dwells in detail on the sequence of actions to make this process less traumatic

@pachzark6133 2 жыл бұрын

This was the most helpful video on stab lubing! Thank you so much :)

@ElderWand777 3 жыл бұрын

Great stuff, very very helpful and amazing production values for the video. Thanks a lot!

@dabosls715 6 ай бұрын

So many vids on stabilizers don't emphasize how to assemble them correctly. For a newby like me your video was soo helpful in this regard. Thanks!

@Smurfmacccccc Жыл бұрын

This is good for me, very easy to understand. I will follow your guide when next time I try.

@kobeiskindacool3763 2 жыл бұрын

this is way easier than i thought. Thank you!

@splurpy_ 5 ай бұрын

Super informative and to the point, thank you

@FleyEnder Жыл бұрын

Appreciate the vid and showing each step and a close of view. A lot of vids will say what to do but rush past it or don’t show the actual product as slowly and it can be a bit overwhelming for those just starting

@randalldavis609 2 жыл бұрын

I’ve watched many of these sort of tutorials, you my man are the best. Liked and subscribed

@TooMuchTech 2 жыл бұрын

Thank you!

@tanushadithiya7136 2 жыл бұрын

Loved the vid one of the best out there

@YTTizah 2 жыл бұрын

that realy helped me out! thanks!

@BlaXXXima Жыл бұрын

Very helpful vid. Thank you.

@matthewgluck437 3 жыл бұрын

Thanks so much bro, appreciate you!!

@taylorbaca1362 6 ай бұрын

such a good tutorial!!!

@daryllesialab2037 2 жыл бұрын

Best tutorial! ✅💯

@saltshaker1787 3 жыл бұрын

the long awaited video is here 👀

@sjofelumsk 3 жыл бұрын

40$ for stabs, really punches in the conviction that accessories for this hobby can be pretty overpriced. I mean, it's like a couple of g's of plastic and some cheap metal. -.- I think a good lube job gets most stabs alright. Personally I feel Durock v2's are as good as any.

@pescetv8371 2 жыл бұрын

My durocks are super rattly so I will have to lube them

@sjofelumsk 2 жыл бұрын

@@pescetv8371 any given stab would rattle without lube

@pescetv8371 2 жыл бұрын

@@sjofelumsk ok thx

@93ksj 3 жыл бұрын

Great guide for starters 👏🏼

@biggieee0620 2 жыл бұрын

bro I disassembled my board for 4 times cause I'm furious about my spacebar but after hearing yours it turns out that, that's the way it sounds with the kbdfans dyboox stabs and kbd67 lite. They are pretty good stabs imo didn't do any mod just traight up 205g0 and they are fine af. The only work really is the spacebar but overall good set of stabs.

@adequatequality 2 жыл бұрын

Criminally underviewed video. Great job!

@Ragnorok64 3 жыл бұрын

I've taken to putting down parchment/baking/grease-proof paper when I'm lubing switches and stabs. Totally eliminates the risk of greasing up your desk or deskmat, can be found in any grocery store, is cheap, and disposable. Though you can reuse a length if you want, since it's more robust than wax paper.

@MaxGamingStore 3 жыл бұрын

Really liked this guide, thank you! If you don't mind, ill pin this video on the stabs description on our site? :)

@zewdl 3 жыл бұрын

Can you please review the ROG Strix Impact II wireless? It is the mouse I currently use and it seems really good

@AnonymousSpidey Жыл бұрын

I will be doing this but with a plumbers tape mod with DUROCK V2s and a Glorious Poly plate and using Akko Cream blues going for THOCKKKYYY

@zizzy2110 2 жыл бұрын

do u need a special pcb or something because i dont see the little holes on mine

@beeeb7306 3 жыл бұрын

What Monitor you use for gaming I’m buying a new one but I’m not sure which one I’m stuck between the three best (correct me If I’m wrong) but I want a 25ich ips with 240Hz and the three monitors are Alienware 25 ich 240 ips, asus tuf 25inch 240(overclocka able to 280hz) and the Msi optix mag 251rx which one should I get?

@burgie3350 3 жыл бұрын

Hello I have a question will Vaseline work instead of the lubing stuff

@S85B50Engine 3 жыл бұрын

I would recommend holee modding them, it takes like 15 more minutes for a whole set and makes it so much easier to make the stabs sound good.

@93ksj 3 жыл бұрын

It’s not a Holee Mod guide though just how to lube

@S85B50Engine 3 жыл бұрын

@@93ksj I know, in a stab lubing tutorial I think he should add a couple of those mods because it makes stabs way easier to tune

@TooMuchTech 3 жыл бұрын

Honestly, I’ve been using 206g0 and I don’t really even know if I need it but I’ll still try it at some point

@S85B50Engine 3 жыл бұрын

@@TooMuchTech It's nice when on a budget because you can get away with using 205G0 on the wire and still have the stab feel and sound good

@93ksj 3 жыл бұрын

on the long run the band aid disintegrates and you’ll have to retune your stabs again plus Holee Mod is kinda annoying, I find Epsi modding with KBDFans material much better as it is more resistant and easier to apply and yields similar results

@ampcomofo Жыл бұрын

I just broke off a switch pin, what do I do???

@min_nari 2 жыл бұрын

i wish my crappy low budget prebuilt cherry black board can be as smooth as yours

@bruddah_ 10 ай бұрын

do i have to completely take all my board off if i just want to lube my space bar, and L shift? everything else sounds sexy af except these two keys.

@8bitsamurai6 2 жыл бұрын

Interesting, I mainly use screw in but didn't realize the durock Piano were different from black ones. What makes them better? I just though it was a color option.

@TheBloXzz 2 жыл бұрын

I guess there is some different plastics involved.

@mistygunner7347 3 жыл бұрын

Hi i know theres a low chance for you to reply but im new to this kind of stuff can u tell me whats the best wireless keyboards

@ColemakDH 2 жыл бұрын

what about wire balancing tho

@pauloetr 2 жыл бұрын

which keycaps?

@slidzy132 2 жыл бұрын

I used my fingers instead of a brush because it broke and somehow it still worked great

@johnnymurphy3371 2 жыл бұрын

My problem is my stabs are stopping by space bar and it’s getting stuck.

@Rohgamu 3 жыл бұрын

Discord Squadddd

@umi6376 3 жыл бұрын

How do you get no rattle from just lubing up the wires? I tried it many times on different stabs and they all rattle in this method for me. But with grease there's no rattle

@TooMuchTech 2 жыл бұрын

Whooole lot of lube lol. Apply a thick coating.

@odhranphelan 2 жыл бұрын

Is it worth getting Durock V2s instead of the included stabs on the KBD67 Lite?

@TooMuchTech 2 жыл бұрын

I don’t think so!

@deltavoided7815 2 жыл бұрын

So I'm using the Durock clip in stabilizers, but on my left side shift doesn't come back up, yet all the others work just fine. Any ideas on how to fix?

@TheBloXzz 2 жыл бұрын

I think you overlubed. Take out the stab and remove some lube.

@L3Ozxc 3 жыл бұрын

Ayy it came out

@utterkid2 3 жыл бұрын

Lube 🥵🥶

@Fish_Weapon79 3 жыл бұрын

What did u use for the wires, would grease work fine

@LyricWx 2 жыл бұрын

Dielectric grease is best for the wires

@neighborhoodgamma 2 жыл бұрын

Ngl I couldn't find tweezers so I used a ink quill. It worked tho 🤷

@sadvibez8517 Жыл бұрын

after i done all the steps all of my stabs would get stuck with the switch and the keycap?? and not click and just stay down?.

@TooMuchTech Жыл бұрын

What kind of keycaps do you have?

@admstantler Жыл бұрын

@@TooMuchTech i used durock plate mounts with everything installed correctly and have the same problem

@ZetaMotions 2 жыл бұрын

I just use my fingers to take out the plate mounted stabs lol

@tfbdam9381 2 жыл бұрын

You check the stab you just press the middle of the stab

@indigo7686 3 жыл бұрын

Interesting

@georgt6753 3 жыл бұрын

10 sec left

@BijanJamshidi 3 жыл бұрын

BET

@BearBoi-sy9tz 3 жыл бұрын

Thumbnail: Thocc Also thumbnail:Nk Creams

@TooMuchTech 3 жыл бұрын

NK Creams thock lol, just depends on the board

@BearBoi-sy9tz 3 жыл бұрын

@@TooMuchTech honestly yeah, for me nk creams are more of a clack, but yeah it can definitely depend on the board

@TheBinklemNetwork 2 жыл бұрын

No I did not test my stabilizers before installing them. Yes that is why I am here now. :)

@JackHuillery91 3 жыл бұрын

Bet

@Drunjk 2 жыл бұрын

What case is that at 12:33 ?

@Drunjk 2 жыл бұрын

@@Fretboard Thanks, that's nothing like the 5 degree though. It's not even a 60% in the video lol.

@xsoul_spazx 2 жыл бұрын

for everyone wondoring sissors worked perfecly for me so no need to buy flush cutters

@abZ360XD 3 жыл бұрын

how ppl doing rn

@TooMuchTech 3 жыл бұрын

Good, hbu?

@michaelthompson9798 3 жыл бұрын

Great video for beginners and job well done 🥰👍 cheaper to do drugs then take up custom keyboards lol 😂 😆 😝

@omerahmed5503 2 жыл бұрын

Can u use Vaseline to lube them?

@decliningship4208 3 жыл бұрын

@robbie19143 2 жыл бұрын

Aside the point, If your stabiliser has legs you no longer have stabilisers

@prodigygaming802 3 жыл бұрын

First one

@malm4640 3 жыл бұрын

Nobody put first what has happened to the world the end is near

@AphillyatedYT 9 ай бұрын

durock v2 suck they have so much play and wobble compared to glorious new gsv2

@supraondueces 2 жыл бұрын

Bro... wash your hands or get a manicure...