Top 12 Best First Hardware Synths under $700 for Beginners 2024

Рет қаралды 11,307

Күн бұрын

I made this video two years ago, but much has changed - some of the synths on my list two years ago are no longer available, and there are some great new synths that have come out since then. I was asked several times to create an updated version of this video, so here it is! These are my top 12 beginner-friendly synthesizers available new today for under $700.
These are videos that I mention where I cover each of these synths in much more detail:
Modal Cobalt8 Video: • Scott's Synth Stuff Ep...
Roland GAIA 2 Video: • Scott's Synth Stuff Ep...
Roland JD-Xi Video: • Scott's Synth Stuff Ep...
Yamaha Reface CS Video: • Scott's Synth Stuff Ep...
Amazon Links:
Arturia MiniFreak: amzn.to/4dLTx67
Behringer Deepmind 6: amzn.to/3tLF9pg
Behringer MonoPoly: amzn.to/4bzw9H3
Hydrasynth Explorer: amzn.to/36EIo98
Korg MicroKorg: amzn.to/4bzwnxT
Korg Minilogue XD: amzn.to/3wHCmiM
Modal Cobalt5s: amzn.to/3URTbmF
Novation MiniNova: amzn.to/3INL6q1
Roland GAIA 2: amzn.to/3ya9UJl
Roland JD-Xi: amzn.to/3IYSYoV
Yamaha MX49: amzn.to/36SqdfU
Yamaha Reface CS: amzn.to/3wKSBf0
Reverb Links:
Arturia MiniFreak: www.awin1.com/cread.php?awinm...
Behringer Deepmind 6: www.awin1.com/cread.php?awinm...
Behringer MonoPoly: www.awin1.com/cread.php?awinm...
Hydrasynth Explorer: www.awin1.com/cread.php?awinm...
Korg Minilogue XD: www.awin1.com/cread.php?awinm...
Modal Cobalt5s: www.awin1.com/cread.php?awinm...
Novation MiniNova: www.awin1.com/cread.php?awinm...
Roland GAIA 2: www.awin1.com/cread.php?awinm...
Roland JD-Xi: www.awin1.com/cread.php?awinm...
Yamaha MX49: www.awin1.com/cread.php?awinm...
Yamaha Reface CS: www.awin1.com/cread.php?awinm...
Thomann Links:
Arturia MiniFreak: www.thomann.de/gb/arturia_min...
Behringer Deepmind 6: www.thomann.de/gb/behringer_d...
Behringer MonoPoly: www.thomann.de/gb/behringer_m...
Hydrasynth Explorer: www.thomann.de/gb/asm_hydrasy...
Korg Minilogue XD: www.thomann.de/gb/korg_minilo...
Modal Cobalt5s: www.thomann.de/gb/modal_cobal...
Novation MiniNova: www.thomann.de/gb/novation_mi...
Roland GAIA 2: www.thomann.de/gb/roland_gaia...
Roland JD-Xi: www.thomann.de/gb/roland_jd_x...
Yamaha MX49: www.thomann.de/gb/yamaha_mx49...
Yamaha Reface CS: www.thomann.de/gb/yamaha_refa...
My keyboard Z stand: amzn.to/3Ix5xuF
Z stand extra tier: amzn.to/3XtVpa6
My keyboard A frames: amzn.to/3YwAPav
My silver keyboard covers: amzn.to/40VySFx
My black keyboard covers: amzn.to/3Gt5oXz
0:00 Introduction
1:41 Number 12
2:55 Number 11
5:12 Number 10
6:29 Number 9
8:21 Number 8
9:40 Number 7
11:02 Number 6
14:14 Number 5
18:19 Number 4
20:59 Number 3
22:23 Number 2
24:44 Number 1
#Synthesizer #Beginner #Top12

Пікірлер: 141

@funkingitup1805 16 күн бұрын

I totally disagree with a couple of your suggestions, and that's why I'm giving you a like and subscribe. Most people don't have any unique takes and just regurgitate the same synths. I like that you had an authentic opinion.

@geoffk777 20 күн бұрын

I recently had to buy three synths for beginners as gifts.. Two of the recipiens were very young people, so I chose the Cobalt5s, which is hugely capable and has very nice sounding internal sounds. One was for an older, more experienced musicisn, so he got a Hydrasynth Explorer. All of the recipients loved their new synths, and I think that these were good choices for the skill level of the recipients.

@ulvessens5902 19 күн бұрын

Great choices! I have the Cobalt 5s and it packs a punch for size and price (also good for beginners). I'm also currently looking at getting the Hydrasynth explorer, which is amazing for sound design and experimenting.

@florkgagga 10 күн бұрын

So the mininova is out of the question? I noticed it a few months ago in a local store and thought what a compact capable toy/machine (if it turns out to be just a toy, which means lack of interest I would be able to take it back and use it myself)!

@florkgagga 10 күн бұрын

But then, if I had all the choice in the stores I would agree with cobalt a and hydrasynth.

@geoffk777 10 күн бұрын

@@florkgagga The mininova is not a toy. It has excellent oscillators with wavetables, multiple filter types and 18 note polyphony. The only downside is the slightly nasty keyboard with no aftertouch. But the sound is excellent. I could have chosen one of these just as easily. Arturia and Korg have some good options in this price range too.

@florkgagga 10 күн бұрын

@@geoffk777 a toy like when you buy your kid a 1300$ bicycle (if the neighbourhood and your budget allows it) , you know, it is the size and colour of one but it does have some pro features, I wondered would that get my son into tinkering with music, that vocoder may be a selling point, at 12 they are doing presentations at school maybe someone from the team goes "how about some sound fx or music".... "we can even play music together...". It is just in the price range where I could stand it to be treated like toy but eventually I would take it back, sell it or gift it to a kid who couldn't afford it. But he needs to get more at ease with school, and maybe choose which training schedule to stick to, rowing or soccer. I don't want to force music on him, just show him the possibility of spending some fortnite-time on something creative, maybe even recreating fortnite tunes. When I met the love of my life at a somewhat advanced age, some of her friends were climbers. With kids who knew about climbing gear and knots at 6,playing with proper gear, on which you literally hang your life, playing with them like with toys. I want to have a kid like that and in some ways I'm pretty close, we were cheaper at some end to allow some good stuff on the other. Good enough explanation?

@hansvandijk5736 2 күн бұрын

I boughtthe GAIA Sh-01 more than 10 years ago. After dreaming for 10 years about making eletronic music, while I barely touched my synth, I finally made a homestudio in one of my rooms. Yestersday I did my first tutorial in the DAW I use and recorded the GAIA for the first time. The fight between depression and dreams is a difficult one, but I finally got somewhere. 😊

@ScottsSynthStuff 2 күн бұрын

Good for you! Keep going!

@stephandelaat 16 күн бұрын

I bought an SH-4D as a beginner synth. The fact it can play 4 synth parts plus a rhythm part and has an basic sequencer drew me over the line. Since than I added a polyend play as a sequencer….that combo is just fantastic for the music i make.

@sonic2000gr 21 күн бұрын

Totally agree with the GAIA2 for number one. Not only it's an amazing synth but it has a killer feature for anyone trying to learn synthesis: Pressing the exit button while twisting a knob / moving a slider will show you the value without changing it. You can examine how every single preset is made. This is literally a dream for teaching yourself synthesis. I am using it like this and I am really grateful the price has come down (766 euros in EU). Also the keybed is amazing (I had korg wavestate before and we both know how bad that is). Arturia Minifreak: they've done an amazing work on it, including the mini keys with aftertouch (same keybed as Keystep 37, which is excellent). I like the VST a lot as well. But the problem with Minifreak is I don't really like most of the presets. I can definitely create patches from scratch I like, but the presets are well, freaky - obviously intended that way, just not for me. I'm still considering it though. I was surprised to see MX49 make the list. Good value, but quite old and AFAIR you can only do real synthesis with an external (paid) tool. More of a rompler I would for a lightweight gigging experience. Great video Scott, many thanks!

@ScottsSynthStuff 21 күн бұрын

The System-8 has that same trick (to see current values) and I agree, it's a very useful feature. And yup, the keybed is excellent, and far better than the Wavestate. The Minifreak is really trying to make itself SOUND digital, to differentiate itself from all the VA synths out there. The MX49 is really much more capable than people give it credit for. I had one for quite a while, until I got my MODX, at which point there was too much overlaps, so I sold the MX49.

@JeffPalmer83 21 күн бұрын

The Jupiter-X/Xm and Juno-X also have this trick (hold Shift and Twist), although they’re not completely knob-per-function. And then (in a different price range, but) the Prophet-6 and OB-6 have a little dot that will light up on the LED panel when you turn a knob to the preset position. This takes a little more time, but it does give you a way to set the panel to match the preset and learn what’s going on.

@sonic2000gr 21 күн бұрын

@@JeffPalmer83 Clever. It could be easily implemented on synths with very limited displays, like the boutiques

@brently8833 21 күн бұрын

+1 on the Deepmind. But there are several things I'll share that you didn't mention. First, you CAN get the 12-voice Deepmind for $700, but just the desktop module. Works great if you already have a keyboard that you like with suitable midi out to control the desktop module. Secondly, Behringer provides both a PC and iPad version of and editor/librarian. The screen on the Deepmind, although informative, has a crappy resolution. I plug my Deepmind into my iPad Pro that sits on a stand behind the synth, and it is a DREAM setup. Not only can I quickly load any of the 512 presets onboard, but I can pull from my library on my iPad, and I can easily edit the sounds and avoid the menu diving required to do the same thing on the keyboard. I also use Cubasis on my iPad to sequence my Deepmind. And to get 12 lovely, liquid sounding voices of TRUE analog sound for this price point makes it simply one of the best synth values on the market. PERIOD. Yes, it has very simple analog waveforms, but so did the Juno series, and look how many hits were created on those synths. So highly recommended, especially for a first analog synth. It is truly the real analog modern version of the Juno that Roland should have made (instead of all the digital clones)!

@richhorton6242 21 күн бұрын

MiniFreak has an analogue filter which I do think makes a difference, and it sounds slightly better than it’s VST equivalent, to my ears at least

@chriswindle3392 21 күн бұрын

I think the Gaia2 is the best begginer synth for how easier it is to understand synthesis than some of the other synths. Love the episodes❤ Thanks scott

@ThisisRends 16 күн бұрын

I‘m not new to Synths but was a Preset Tweaker.At one time i thought man you need to understand this stuff. So i bought a Gaia2 just for that reason. Now i can follow and replicate most of Synth tutorials here on KZfaq regardless what Synth is used in the Video.

@infn8loopmusic 14 күн бұрын

If the JDXi had better keys it would be the king of all mini synths. It covers so much ground. The engine actually supports aftertouch even though the keyboard doesn't. And yeah menu diving is as always obnoxious but there are some app editors you can get.

@ScottsSynthStuff 14 күн бұрын

100% exactly what I was trying to get across. With a better keybed, and perhaps a larger screen to reduce menu diving, it would be a KILLER synth. It will never happen however, as it would cut into the sales of the Jupiter Xm. Zen Core is Roland's direction today, and outliers like the JD-Xi and JD-Xa are still around...for now.

@infn8loopmusic 14 күн бұрын

@@ScottsSynthStuff great vid. Really nice analysis. I sometimes use the JDXi just to compose and arrange things and then route notes to other synths but I always keep the drums from the JDXi those classis vintage samples are great

@Foxxorz 21 күн бұрын

My pick is the MicroKorg. It taught me enough to feel the need to upgrade to a hydrasynth over last winter. :)

@Post-destination 21 күн бұрын

Just wanted to say about the Minifreak, although its natural tendency is toward extremely digital sounds, some of the oscillator types such as Waveshaper and the NE Bass, combined with the modulation capabilities and oscillator routings (and the smooth analog filter) mean you can absolutely get "analog sounds" from it. As another commenter mentioned, Arturia's presets didn't necessarily do the synth justice, as they tended toward harsh and digital. Like the Hydrasynth, the MF is extremely deep and powerful and with a bit of sound design experience, can sound like almost anything.

@mudi2000a 20 күн бұрын

There are also great vintage presets available for the Minifreak.

@Jobotubular 17 күн бұрын

there is literally a whole video on making just those old classic sounds from the miniFreak

@ulvessens5902 19 күн бұрын

Hey Scott, great video! I really appreciate the way you explain gear with their strengths and weaknesses. It's very helpful to budding synthesists like myself. Cheers, from Australia 🤙

@minisynthmaniac 14 күн бұрын

Of those I have the Mininova and Roland JD-Xi, and I am quite satisfied with them, because they cover a wide sonic range and also the drum machine capabilities on the Roland and the flexible arpeggiator of the Mininova complement each other beautifully

@jaimeross7507 21 күн бұрын

AWESOME Vid Scott!!!!!.....The Help You offer and freely give is Priceless!!! ❤.

@Goettel 21 күн бұрын

Without knowing what a (beginning) player wants lists like these are almost completely arbitrary, but sure all of these are good in their own right.

@SiegelBantuBear 11 күн бұрын

Master class master catalogue. Am hapoy you included Arturia. This video has def influenced my go to. Asante sana😊🙏🏼

@MelvsAmores 3 күн бұрын

SUBSCRIBED! I love your in depth discussions- shows your experience. Would love if you could tear down and show us the secrets of the good 'ol Korg Kronos.

@rjakiel73 9 күн бұрын

So with the MX49 there is actually a lot more available. With the Melas Tools for it you have FULL access to the engine for sound design. You also have FM Essentials whcich adds a full on FM library through an iPad/iPhone.

@jPaulofe 12 күн бұрын

Hi Scott, great video as always! From your top 12 list, I owned the Roland JD-Xi, the Mininova and the Behringer Deepmind 6, and I have to say: the JD-Xi was really a great disappointment due to several things (the worse keybed that I played so far, the very limited analog synth, the locking of MIDI channels 1,2,3 and 4, and the intense menu diving, as you said) to the point that I decided to return it before the 30 days of purchase. The Mininova, on the contrary, was a very capable synth, although not very easy to manage fully without the Virtual App running on a DAW. At the end, and because I needed cash, I ended up selling it after a few Months of use, but I regret that a lot now... The Deepmind 6 is a great synth, with great effects, but a fair keybed, and a very noisy (effects) when switching patches, but all in all, a great synth. I also had to sell it due to money issues... From the remaining of your list, my favorites are the ASM Hydrasynth Explorer and the Arturia Mini-Freak, although the ASM seems a better and more powerfull synth (maybe my next buy, if I can) :-) Take care

@stiptreezy8481 10 күн бұрын

Great video! I had no idea Modal was going out of business but I am incredibly stoked that they got bought! I have the craft synth from them as a few years ago when my synth journey began I was looking for something small to help me learn and it has been amazing. I’ve had my eye on the cobalt module for a while. Anyways, cheers!

@Observe-n-Learn 20 күн бұрын

For a true beginner, consider your goal and budget. If you are trying to learn synthesis or just be a twiddler, get a synth with a lot of knobs/sliders so everything is WYSIWYG. Budget wise, you'll get more bang for the buck if you buy something used, considering most new synth prices have skyrocketed. If your goal is to learn how to play, buy a cheap 88 key digital piano and take lessons. Using Scott's picks as inspiration, I would go with a used DeepMind12 or Hydrasynth Explorer. I would avoid the JD-Xi. My personal pick for price range, knobs, sound would be a used Studiologic Black Sledge-- all knobs, bi-timbral, wavetables, high quality 5 octave keyboard, aftertouch....

@calebsutten5780 20 күн бұрын

I hadn't even heard of this one till I delved into the comments, and I've looked at alot of synths. It looks so approachable 👍 (talking bout the sledge)

@ScottsSynthStuff 20 күн бұрын

I have done a used video before here: kzfaq.info/get/bejne/bMCSZZCoptWbYn0.html I agree with the Sledge, it is a very underrated synth. I wish the made the newest version still in yellow, though!

@Observe-n-Learn 20 күн бұрын

@@ScottsSynthStuff I also wanted a yellow one, but I heard the keybed is not as nice and maybe some other things. Kinda like Lexus vs. Toyota. I also heard stay clear of the early yellow ones.

@Observe-n-Learn 20 күн бұрын

@@calebsutten5780 Even though it is all digital, the sledge front panel reminds my of my ill-fated memorymoog (stolen).

@calebsutten5780 20 күн бұрын

@@ScottsSynthStuff hell yeah, man. That's where I learned about the opsix. Keep up the great work 👍

@budkin 21 күн бұрын

Excellent video! That Yamaha MX-49 sounds beautiful!

@jk-pl8cl 20 күн бұрын

Scott , this was fantastic , I hope you expand this to different price points , I know it has a lot of personal perspective , but who cares I loved it !!!

@malcolmgregoire1019 17 күн бұрын

I like it when you do these reviews. I wonder if you would ever do a review of some of the newer Korg synths like the King Korg Neo?

@igorcarvalhopadilhaandrade5886 21 күн бұрын

🤗I'm Very Happy With Your Class!🤗

@1980VINZ 21 күн бұрын

Absolument amazing video. You’re the man (even if I already got a Deepmind12, HYDRAsynth, Minilogue XD) This is a perfect video for a beginner !!!

@beepbleepboop 9 күн бұрын

great vid! the minifreak track was soooo sick! i broke my microfreak in a move and have missed it dearly ever since, im gonna have to get a mini to replace it one of these days.

@n1tr0sys09 21 күн бұрын

Cobalt 5s owner, and I can say the thing is amazing at almost everything one would need from learning to exploring to playing as the first hardware synth, why?, the algorithms shows you lots types of synthesis, just from that you can explore what FM, sync, pwm, RM, AM... sounds like with simple 2 macro parameters that you can mod. As scott and others reviews say, the way modal has layout the synth is pretty intuitive and really fast. The app is amazing for viewing And then the 5s portability is just amazing since it runs from usb, so basically whatever, I travel with the thing and a battery pack and literally play wherever...

@ageshero 16 күн бұрын

These videos are so dope, thank you Scott! I have a question, I know you’ve done videos on the summit, do you know if the summit has a favorites bank or a 8x8 patch selector? It’s hard to buy any synth that doesn’t have a patch selector button group to chang programs

@2.Plus.2.Equals.5 14 күн бұрын

For what it's worth, i got a hydrasynth explorer as my first actual synth about 2 Christmas' ago and i still love messing with it to this day.

@WildernessMusic_GentleSerene 20 күн бұрын

This video kept showing up in my YT list, I was going to click "not interested" and then noticed it was new, I thought it was your old one :) . I like your channel because we think alike, we are not analog snobs and use whatever synth does the best job for task at hand. I just bought a Gaia2 because it is so rare, been using the Gaia for 13 years, it is my favorite digital poly. The original Gaia was my favorite not because it sounded better than anything else, but because it was lighting fast to design patches with gigantic chord changes or fast keyboard play with medium release. I have a Fantom, but I use the Gaia because the Fantom needs a menu and about 5x to 10x the time to sound design. So I rank the Gaia as favorite simply because I use more than any other digital poly. Sound design should be fun not frustrating work, that is why it was a no brainer to buy the Gaia2. While the Gaia2 has nothing in common with the Gaia, both will complement each other, I will probably use the Gaia as a stereo enhancer to the Gaia2 since I can pan oscillators in the Gaia and can't in the Gaia2.

@ScottsSynthStuff 20 күн бұрын

Agreed, for sound design, the GAIA 2 is excellent, with its plethora of controls. The System-8 is similarly excellent for the same reason, but much more expensive. That said, my favorite for sound design is the Hydrasynth. Definitely more complex, and there's no way it could be knob-per-function, but the way they did it makes it extremely easy and fast to do sound design.

@WildernessMusic_GentleSerene 19 күн бұрын

@@ScottsSynthStuff The Hydra is on my list, mainly for that sound design, but equally for the polyAT, never had a chance to play a polyAT synth. Gaia2 is for experimenting with wavetables, but next considering granular with the Tasty Chips GR1.....then....maybe time for a Hyadra. I have avoided the Hydra because I believed it has a long learning curve, but after your description in this video, maybe not so long for a veteran sound designer.

@LuigiMaesano 13 күн бұрын

Me too. Sold the Yamaha Reface CS, regret it, bought again. Will never sell again

@CristianTroncoso-ge8wz 12 күн бұрын

Deepmind 12 still very very good!

@RobertFisher1969 21 күн бұрын

I was pretty close to getting the MX49 as my first synth, but I’m done with “full size” keys. They’re great for those of you with bigger hands, but they’re painful and awkward for those of us with smaller hands. I ended up with a Minilogue OG and have been really happy with it. I now have the Reface CS too, and it’s also great. Currently trying to figure out what to get as a third for use with my SQ-64. I’m currently thinking either a Volca Keys or a Monologue.

@ScottsSynthStuff 21 күн бұрын

I come from classical piano, and my fingers just do not fit minikeys. I have tried, but I just can't play them, I hit keys that I don't intend. Of those, the Reface CS definitely has the best of the minikeys that I've tried, in my opinion.

@RobertFisher1969 21 күн бұрын

@@ScottsSynthStuff Yeah. I didn’t realize it at the time, but I now think that key size was one of the things that made me end up picking guitar as my primary instrument in school instead of piano. My keyboard technique is improving much faster now. I’m hopeful that efforts like PASK will eventually make pianos of various sizes more common again rather than being so standardized on only one size. Things are better in the synth/controller world, but you’re still hard pressed to find more than 37 keys in slim keys. And even then, they aren’t the best keybeds. So I do find myself using two Refaces side-by-side at times instead of my 61 slim-key controller.

@classicarcadeamusementpark4242 20 күн бұрын

That's a first hearing from someone that says it's painful or awkward to use full size keys vs mini keys (often known as mid size). My first hardware synth was a Casio CZ-101. I just knew how to tinker at the time, and the first lesson to me with average sized hands are, your going to be limited with these smaller keys. A year later, I upgraded to the CZ-1000. Identical keyboard, except full size keys & membrane buttons instead of regular ones (I didn't see the advantage to membrane vs buttons though). I have a small portable battery operated travel keyboard, an M-Audio Oxygen 8. It has full size keys on it, otherwise it would be hard to really practice anything on it. I have an MX49 too, but almost never use it after getting the superior MODX6. On a side note, the mini keys makes the keyboards look like a toy when you play in a band and they can be hard to be taken seriously. Back in the 80s, only toy keyboards had them. Today, it's a different story though with keyboards like the Jupiter Xm. But it's worth trying to learn how to play on full size keys just so other musicians won't laugh at you.

@Jobotubular 17 күн бұрын

other musicians don't laugh if the result is effective. So I don't hesitate to bring those 'toys' to a gig, alongside the 'real' keyboards anyone could respect.

@RobStuart-mv7my 21 күн бұрын

Whenever you do these videos I get excited. Then I remember that I live in Canada while you're in the US😎

@zap7759 21 күн бұрын

Great list. I wouldn't hesitate to recommend a mono like the Bass Station 2 if someone isn't into classic bread and butter keys, especially if in a band.

@asleeds 20 күн бұрын

Shout out for the Roland Boutique JU06A. Great synth if you want to learn how to program a synthesizer. Very hands on.

@evanglicanism 21 күн бұрын

You know what else is pretty awesome, the Vermona Mono Lancet 15! I don't own one, and am not exactly a total beginner, but that thing is an extremely usable, very simple analog synth that makes some wonderful tones. I kinda want one, even though it does way less than many other synths!

@Petrpans7 20 күн бұрын

Love this video

@Kev5565 21 күн бұрын

I like what you do, I don't have a synth or music experience but I'm looking for something inspiring that makes me want to learn that's not too thin on what can be done, I've been on the fence on the deepmind 12 but it doesn't really get my interest until the effects are applied. I'm 59 and at a point if I don't do anything now I never will, I've seen youtubes on Sequential Take 5 and Yamaha Juno X which I like the sounds from, I recently liked a demo track from Roland Gaia 2 but not heard much from it.

@domingoleija3436 13 күн бұрын

I still can't believe everyone totally missed the most unique feature of the JD-XI ? 🎉

@klstay 7 күн бұрын

Before recommending any first synth it is important to consider a couple of things for who is getting it. Do they have decent keyboard chops and want to use them with it? (Since it is a first synth I assume they do not already have a good full size controller keyboard) If so mini-key synths could be off the table. Do they at least think they want to learn about synthesis and create their own patches from scratch? Or do they mostly want to play pre-sets and tweak a few of the standard "bits" here and there? (Regardless what they tell themselves in reality that second category is the VAST majority of hardware synth owners) No AT on so many Korg/Yamaha/Roland synths is a disgrace. Generally I think your number 1 is a great choice IF the price stays there, but an accomplished keyboardist plus the simpler/more accessible voice architecture could make a Deepmind 12 worth the extra cost IMHO. One other possibility to consider (though it would be possibly a bit more upfront learning curve) with more flexibility later: An M-Audio Oxygen Pro or Novation Impulse controller with a Pro 800 or JX-08.

@treetopjones737 17 күн бұрын

MiniNova, you have no direct control for modulation settings, you have to menu dive to get that. Reface CS, downsides: ONE ADSR, you either find a sweet spot mix between filter and amp, or you can go all the way either just filter or just amp. A decent cheap learning synth and of course very portable. I'd recommend buying a good reverb FX pedal, as that is missing in the FX section. Also you can't combine the FX in it, so again buy some pedals to get that ability ( or plug-ins for a DAW ).

@petervandenbosch6353 16 күн бұрын

Agree on the Roland JD-XI. I have this synth and i like the possibilities that it offers for the price but just hate the user interface.

@Specialeffecks 3 күн бұрын

I have digital synths and would like to add a very good Analog (or great VA) for true subtractive synth. I want it to be fairly simple to use and get great sounds and drones. I want to spend under $1K (a good used one is fine). I OWN: Microfreak, Novation CircuitTracks, Roland MC-101. I started with the idea that it would be great to create an entire song in one box (still like the idea), and I am not (yet) into DAW. I would like at least the choice of 5 notes (or so) of poly for chords, midi in/out (5 pin). Edit: I don't mind desktop (without keyboard) but don't want patch cables. I seem to be leaning towards any Behringer product or similar. Any suggestions?

@domingoleija3436 13 күн бұрын

Cobalt 8 is my keeper and def was underpriced and built so sexy solid. 🎉 Tough choice between GAIA VS WAVESTATE?

@viniciusmoura9105 14 күн бұрын

Hey, is it possible to connect an external controller to the Hydrasynth Explorer to kind of try to compensate for the lack of the ribbon found on its bigger brothers?

@alimaleki217 21 күн бұрын

I feel that you should expand your maximum price and include the Sequential Take 5. I almost bought the Hydrasynth Explorer after watching your videos but decided to go with something that wouldn’t involve a lot of menu diving.

@Jobotubular 17 күн бұрын

not really a like-for-like comparison there, since the Take 5 is closer to the price of the HS Deluxe -- and if either is your first synth, you have far more discretionary income than most. Scott did well to choose a substantial but manageable price limit.

@alimaleki217 16 күн бұрын

I understand that Scott decided to use price as a criteria with a maximum of $700, but your comment about “more discretionary income than most” is premature without an understanding of the purchasers other discretionary spending. I chose a more expensive device because the layout of the controls was worth the extra cost.

@bananarider69 21 күн бұрын

Lot of love for the Mini freak lately! Word on the street is Arturia has a new synth coming next week too..

@antons5120 21 күн бұрын

Speaking of microkorg, look for akai miniak (or alesis micron if feeling extra risky) second hand in your area. Much deeper synth. UI is somewhat bearable, coming from mc-101 and 707

@domingoleija3436 13 күн бұрын

The JD-XI HAS a special feature ( not vocoder) but that's a secret until I decide to sign up w you tube again? Renting these synths is probably best way for muah till the winner is convincing enough . Thanks for the superb comparisons and don't forget to scoop me up in your airplane when you fly by Austin ,tx champ 😊

@soryu2 21 күн бұрын

Good picks! Did you consider the Blofeld and it was out of the price bracket in your region? I so much prefer mine over the modal 5s, which has wobbly & imprecise encoders and a barely audible output level. Also the Blofeld or a Hydrasynth have so much more sound design possibilities than it. Thanks!

@Goettel 21 күн бұрын

Any potential Blofeld buyer should make sure to check all the encoders though.

@ScottsSynthStuff 21 күн бұрын

Unfortunately the Blofeld is $1200, so way out of the scope of this video.

@zap7759 21 күн бұрын

$750 at Thomann for Blokeys. Right under the import tax threshold.

@soryu2 20 күн бұрын

Oh, in Germany it can be found new for under 700 euros. (I have the desktop version, though)

@user-JM1967 15 күн бұрын

No mini keys, please!

@GeorgeLocke 21 күн бұрын

Does the minifreak have granular? I thought it was just the micro that got it?

@boblove2912 16 күн бұрын

How are any of these for beginners? Surely a simple monosynth ( possibly even 1 oscillator ) would be much more suitable for a beginner learning subtractive synthesis. Jen SX1000 was designed for people to learn on back in the day.

@KRAFTWERK2K6 16 күн бұрын

Kinda weird to see the Microkorg on the list since it really only becomes more usable with a software programmer, as the quasi-menu diving on the thing itself is not really the kind of direct access you would want from a synth. But since this models is now being phased out by Korg after over 20(!) years (i think it came out in 2002), i'd say get one while you can. Remember, it uses the same virtual analog architecture as the MS2000, which still holds up amazingly well even today. The Arturia Minifreak is definitely a no-brainer and really deserves to be on this list, as it gives the beginner the most bangs for the bucks. Just as the orignal Microfreak that costs even less but sadly has absolutely ZERO internal effects. Depending on what you need (actual keyboard or internal effects) i would say the Minifreak and the Microfreak both should be on the list.

@chrisstaubyn774 21 күн бұрын

Hi Scott, I'm a soft synth designer and a subscriber who generally enjoys your content but has two criticisms of your list. With so many dislikes and bottlenecks on the JD-XI, you should've excluded it as a "best." You're a Modal fan, but the Arturia software is a prime example of how poorly designed the Cobalt software is. If you use the Cobalt software in a DAW with a mouse and keyboard, it becomes apparent Modal cut corners with their software design. Also, a VA synth (Cobalt) that didn't get free-running oscillators until a year after release is terrible.

@IrrationalRecreation 20 күн бұрын

While not a popular opinion, I would suggest adding an MPC One+ to the list (sub US $700). Ok, the "keybed" is a set of velocity sensitive pads, but it has onboard plug-ins for synthesis and fx as well as sample playback, sampling and sequencing and is a great hub when you add further hard or soft synths to your collection. They won't suit everyone but it provides multiple options when producing music, they're very accessible and can be great fun.

@ElectroPanPipes 19 күн бұрын

It’s an excellent choice. Best drums, best sampler, can play/make multi layer synths from real world synths. Juno & Moog plug-ins are great. Has CV, sequencer, audio interface. Just add a midi keyboard.

@Jobotubular 17 күн бұрын

A reasonable suggestion. Of course Scott did say that a playable keyboard was one of the parameters for his list.

@qwe1231 16 күн бұрын

A decent selection. Although I think the JD-Xi is a plasticky fingerprint magnet and a menu-diving nightmare it's very powerful (but my least favorite of the recommendations). A shame about the $700 limit because for $800 I'd unreservedly recommend a used Studiologic Sledge 2.0

@swanofnutella4734 17 күн бұрын

I need a simple, real vco, "beading" sweetspot poly. ....I have a Hydra and a Virus. The last thing I need is another virtual analog. Your continual extoling of Modal and the Cobalt8 has me gassing anyways though, dang it. Maybe I'll just pass on a fancier poly, and get a Pro-800, so I can afford a Cobalt8 too. hmmmm....

@rupakmajumdar9959 20 күн бұрын

As an owner of both the Roland JD-Xi (my first polyphonic synth), and the Korg Microkorg S.... All the review videos I Saw of the Hydrasynth Explorer said it was very portable and compact, so I was expecting it to weigh less, but between those 3 it's my biggest 37 key synth lol

@ScottsSynthStuff 20 күн бұрын

It's got mini keys, but it's definitely not a mini synth!

@valleyken 21 күн бұрын

- Cool.

@benwinter2420 19 күн бұрын

I know it's not new release but still relative cheap . . but as as the story goes start at the beginning as with early pocket programmable synths like the tiny Casio VL tone 'toy' . . even on own but through effects get weird sounds ambient background atmospheric which I think are synths strengths rather than the cacophony of every sound possible played in sequence . . same reason why I like 3 & 2 & 1 , raised action slide guitar . . too many strings muddies the waters

@evollove708 11 күн бұрын

Im a bass player ny trade who has recently picked up synthesizers. I have a Roland em-303 as one rig snd a Roland jv-90 as well. 😅Both beginner rigs however the em-303

@evollove708 11 күн бұрын

Is a toy compared to the jv-90 . Gotta start somewhere right ???

@SmallWorldBigThings 21 күн бұрын

Roland MC-101 has ZEN-Core engine (+4 timbers, +128 voices of polyphony)... and for 700USD you can buy MC-10 and MIDI keyboard. But it is not a synth for beginners ;)

@stevehofer3482 18 күн бұрын

I like your choices except for the Monopoly. I think the Monopoly is a terrible beginner synth. The panel layout is awful, and since it only has one filter, it isn’t really polyphonic. I have been recommending the Casio CT-S500 and CT-S1000. Although these are home keyboards that are primarily sample based, they have filters that you can change the cutoff and resonance. You can change the envelopes, and you have a nice assortment of effects. You even have portamento. It has bluetooth midi so it makes a nice keyboard controller especially for the iPad. Running Kong’s Monopoly software in the iPad gives you a better monopoly than the Behringer hardware unit. The software version is fully polyphonic and has hundreds of presets. The CTS-500 has a street price of 380, it covers a lot of bases.

@RalphWLundvall 4 күн бұрын

A running list of jargon would be long. Wow.

@only_folls 12 күн бұрын

I think opsix should be an honorable mention or swapped with one of the ones you "didn't" want on the list... when i was watching the mono poly part i was like ???? as someone who just has the software of it from korg but that is really cool there is a remake from another brand the chord button i feel like is pretty nice on alot of sounds from the vst pretty cool list i got the hydrasynth desktop as my second synth hopefully i will figure out cv or use midi to control it with my keystep pro... but i really think opsix gets a bad rap when its really a nice synth and full size keys not weighted but a nice tool to have im going to learn to add patches and stuff and possible do a firmware update if i didnt already lol its been a while but it really is nice and i feel pretty beginer friendly with 250 presets but the starting from scratch sounds are not very beginer friendly

@ScottsSynthStuff 12 күн бұрын

My list is for subtractive synths under $700, the opsix is neither. You can simulate some subtractive functionality with the opsix, but it is primarily an FM synth.

@mudi2000a 20 күн бұрын

So if we have the Gaia 2 … I don’t know if the price is below 700$ i clearly would add the Korg Modwave which is also a wavetable synth like the Gaia but the synth engine is more powerful. Same with the Opsix. But I don’t know if they are below the $700 limit.

@ScottsSynthStuff 20 күн бұрын

The Modwave is $899 and the Opsix is $749, so both outside the price range, but I would not recommend either of them as a beginner synth for someone wanting to learn subtractive synthesis. The Modwave is way more complex, and the opsix is FM (with some subtractive bits tacked on top).

@mudi2000a 20 күн бұрын

@@ScottsSynthStuff thank you for the reply! I asked because you listed the Gaia 2 and here in Germany both are over 700€ and there is only like 50€ difference between them. And I think the Modwave is not so much more complex if you just use it like a subtractive synth and ignore the rest. However I do think that the Gaia 2 front panel is more beginner friendly and clearer designed. As I’m not a beginner myself I would probably prefer the Modwave but I can see why you prefer the Gaia 2.

@davlippo7 19 күн бұрын

I have noticed that most of your synths you own are not actually real analog synths like Oberheim, Deckard's, Moog Etc. etc. I was wondering whether you like the real deals or too much to mess with. For the first time ever I bought both the new OB-X8m and Deckard's and once I did have a Moog, forgot I had that one. There's something special about the real thing and I'm sure you've had those at some point. It's actually a blessing that we can now buy these and they aren't $30K.

@ScottsSynthStuff 19 күн бұрын

My "analog rack" is to the right, which you can't really see in this video, where I have an SH-101, Juno-106 and a Polysix. I've been at this for 35+ years now, so I've gone through a ton of analog synths in my time. I can appreciate the real thing, for instance I use the Juno-106 all the time, even though I have 106 emulations on the Fantom and the System-8. But I wince every time I turn one on and hear something not quite right, as I know I'm potentially one power cycle away from something going wrong again, and I'll have to pull it apart, find and fix the problem, recalibrate it....I never have to do that on a modern digital synth. :)

@MrKKmusic 14 күн бұрын

I had the JD-XA and I couldn’t read any of the knobs. The red on black was literally illegible

@Geekraver 18 күн бұрын

JD-Xi is not hard to find used for $250 which is pretty good

@supercompooper 21 күн бұрын

Do one of these but over $7,000 😊

@Berus7777 10 күн бұрын

Scott - question (seriously) -- Is that a wig?

@ScottsSynthStuff 10 күн бұрын

haha, no that's my real hair!!

@connor_flanigan 16 күн бұрын

I miss the old Scott....I miss the long hair 😮‍💨

@matthewgaines10 20 күн бұрын

I’d argue real beginners don’t have a dedicated studio or workspace established. I would start a beginner with a module and an affordable MIDI keyboard. Less investment and less space in some cases. Particularly if the beginner is buying used. Less potential failure points (keys and wheels). For the beginner, front end investment probably will be a factor so the least upfront investment, the better. Otherwise, the list isn’t bad.

@GeorgeLocke 21 күн бұрын

Confused about why JD Xi is at #6 since you had almost exclusively bad things to say about it.

@ScottsSynthStuff 19 күн бұрын

It's still a great synth inside, two separate digital engines plus drums (and that analog voice), with a great sample set, TR-Rec sequencer and plenty of capability and flexibility. It's just hobbled by that awful user interface.

@PsychologyAcademia 20 күн бұрын

Bad choices.knob per function studiologic sledge

@calebsutten5780 20 күн бұрын

That does look pretty sick and easy to work with 👍

@ScottsSynthStuff 20 күн бұрын

The Sledge is an excellent VA synth, and it would make this list except it's $1100, so far above the $700 limit.

@PsychologyAcademia 18 күн бұрын

@@ScottsSynthStuff no its not. Its £549 at Andertons and elsewhere

@ScottsSynthStuff 18 күн бұрын

@@PsychologyAcademia All the prices I use are from Sweetwater, which is the largest retailer in the US. The Sledge is much cheaper in the EU, as it comes from Italy, so not subject to US import tariffs.

@JustDoIt-xq9pi 17 күн бұрын

Your title is wrong. It should say 'this is my top 12'. It's clearly not the top 12 in general.

@thegreatsiberianitch Күн бұрын

💨

@logiclust 21 күн бұрын

honestly none of these modern synths should cost above $700 based on the materials and dev. i mean, it seems half the non-analog synths out there these days are just arduinos

@ScottsSynthStuff 21 күн бұрын

The cost of a synth is much more than the hardware components inside. The development of the firmware and the sound design of the factory patches are major investments on behalf of the manufacturer. Consider that a synth costs say $150 to physically manufacture. They then sell that synth for $350. That's $200 that has to pay for marketing, cost of running the business, employee salaries, shipping, etc...plus to pay down the capital investment made in developing the synth, plus the ongoing expense of upgrades and bug fixes. The distributor then adds on their margin, and the retailer then adds their margin, so you end up with a price of $700. So yes, there are not $700 worth of components inside, but you're paying for FAR more than just the price of an Arduino.

@SWATTECHNOLOGIES 21 күн бұрын

Thank you, Scott many people do not understand the mechanics of business, especially musicians. I appreciate you are standing up for the pressures and realities synth makers face. In fact, to me my Modx 7+ is worth much more than the $1,500 I paid for it@@ScottsSynthStuff

@ForecastGrim 21 күн бұрын

@@ScottsSynthStuff I’d like to add that these prices are clearance fire sale prices compared to 10-15 years ago. I think these price points are spot on. I say to anyone who disagrees with pricing start investing in plug ins. Hardware isn’t for you.

@Tommyalpaca 21 күн бұрын

Idk the Dave smith stuff is worth it

@mudi2000a 20 күн бұрын

The non analog synths are clearly not Arduinos. The Arduino doesn’t have enough power by far to do the DSP processing. The Korg ones are Raspberry Pi based but that is a completely different price level than the Arduino.

@sturdyblock 21 күн бұрын

Wouldn't buy a Gaia 2 even for $200.

@user-bp1yr3uc1h 20 күн бұрын

Thanks so much for this video, just my rant, I hate it when modern digital synths are not 16 part multi timbral

@ScottsSynthStuff 20 күн бұрын

Those synths are not really made anymore - the workstation synths like the MODX/Montage/Fantom can still do it, but it's not like it used to be 20 years ago where almost ALL digital synths had that capability.