Quick question I have a 08 crown Vic. Do the zip tie to the back bumper really help on gas or that’s a lie ?

Holy crap, this guy is tons better than mr random reviews. You obviously know your stuff.

I am currently not a mechanic. But i was one for a long time. This is the most helpful mod video ive ever seen. No bullshit ways to make machine better. I was a transmission mechanic what you said was spot on.

I like the 3.27 gear .. I know that it is not ideal for acceleration , but I really like that I can do 140kph at 2500rpm , I can go somewhat fast without harming the motor

Free mod - clean the damn leaves off of the cowl.

My mods are Apple car play head unit Blue led lights Thats enough for me

Love the crown vics wish we had them in Australia,Props from the land down under.

I'm transmission shopping now myself (T3650 manual swap for my low miles 05 CVLX). Once that's paid for, I'll be shopping for the 5.4 swap, because everyone needs more torque :) .. Good video, nice to see some one point out that headers aren't needed, and some realistic numbers for an upper intake upgrade.

Daaaamm... with your knowledge and videos.. I'm really considering buying a crown vic.. I appreciate the knowledge and the time u take/took to make these videos!

I have an 08 Cr Vic Pi and i really enjoy your video's,can't wait to see yours complete,peace.

Just picked a 2001 vic up today, im 16 and plan to use your channel to further extend me knowledge on cars

Great video, great information 👍🏼

Thank you for this info man! 💪🏻

@bst ford channel Congrats on the new channel

great vid bro!! but word of advice, the vics, marquis, twncar etc.. with the electronic throttle body(ETB) ones, dont put a CAI into it if u dont want to do some tuning with em. Its not hard but up to u. heres directions for cars with ETB. 1. unplug bat first, then the fuel relay, then install CAI, plug bat back in and crank for 3-4sec., unplug bat, install relay, plug in bat and and wait for 3 sec in the on position then start and u should b good to go. best suggest is go with the Cable throttle body so u dont have to do all that to tune it unless u really want to. 😎😎🤘🤘

#1 should be upgraded and oversized front rotors. I got the KVR setup for my Marauder (check my Avatar). This will allow you to wait until the last minute before you slow for the curve, leaving "the man" way back there thinking you can't make the turn. Now, about making turns... #2 should be a 1-1/4 inch rear sway bar so you can make sharper turns. Now about coming out of those turns... #3 was close, perhaps you could use 3.55 gears like my Marauder but if you're going to do that, why not go all the way and have the mechanic install 31 spline axles and replace that man-killer Traction-Loc differential with a Torsen T2 differential. The Traction-Loc tries to lock the two axles together and on wet roads or coming out of a turn and kicking it in the A$$ you will lose traction on the inside tire and often lose control. But a Torsen T2 will differentiate and you'll do a lot better coming out of turns. Also the control arms and Watts link upgrade is a good idea. I have Metco polyurethane arms on mine and they keep the rear suspension tight as Dick's hatband. #4 is correct, upgrade that tranny. However the 4R75W is good enough if you have a good technician put in a shift kit for racing Mustangs. And if he's good he can modify the shift schedule as well as remove that 120 Mph limiter in the computer. #5 should be dual adjustable racing shocks, front and rear. QA1 makes the ones on "Quicksilver", my Marauder, and I have them adjusted so they're one click stiffer extending than compressing. This makes the car get lower as your speed increases. I've had Quicksilver at a buck-forty and she's about 1/2 to 3/4 inches lower at speed than sitting still. All that power stuff you did? *Save your money bro and when you get 5 grand get a good technician to put a turbocharger setup on it.* You'll gain 150 horses and be looking for 180 Mph tires. And with the good brakes and suspension I just outlined, you'll be ready to better control those horses instead of driving a death trap.

Great advise. Have you tried putting the bigger MAF yet.I did the big MAF,TB,SPACER,K&N complete COLD AIR int.setup,and a TUNE(Moe`s Speed Shop)...Really woke up my GMQ LSE.. I need to do the gears,and transmission. Thanks for all your info.

My opinion, crown Victoria over box Chevy caprice. That's just me & I love you're channel!

Thanks for a good honest video.. and not the typical "straight pipe" .. Exhaust does have to be addressed but it's not bad. I have a 2011 and it has the drive by wire so I guess it limits what I can do with the throttle body.. I'm learning

Thank You, *gets on knees* thank you so much my lord shit is useful knowing what to do now!

Great channel, thanks “Make Crown Vic’s Great Again “

I put all new police suspension in my p7b and man that car handles everything totally worth it might be harsh at times but still reliable and I did one thing at a time with motor craft parts.

Spinning is not winning..good tires should always be your first mod..a tune up, a set of gears and a handheld tuner should come next..with a tuner a j-mod would be pointless..the drivetrain in these vehicles are extremely durable and unless your getting them from morons they are very rarely damaged to the point of needing a replacement..I like what you did with the video tho..keep up the good work man

Mpt tuning also has a good panther tuning platform as well.and yes every lil thing you do to these cars engine wise or transmission will need a tune to have them running there full potential. horsepower and torque.

You can slot a t body off a three valve 5.4 to work. Gears....3.90's are what you need. Also the best swap for the panther is a five speed swap. 😈

Got a '09 P71, handles like a dream, i can go in hot pursuit of time when I'm late to work. I can make half the normal time. All i do is just keep her maintain like it always has been. I got records of her since her birth. Got her for sale now. She's got a newer transmission. My wife was driving it to work responsibly but i got here an SUV she liked so with my truck no we got one too many. I'm in Chicago, IL USA Hasn't tap 100k miles yet.

Another thing to do especially on 02 and earlier, or any of them for that matter. Is swap out the intake manifold for the frpp intake. Resolves the factory defective intake bond between the aluminum water passage cross overs and the plastic intake. And will typically add about 10 to 15 RWHP. As a side note: frpp claims 30 hp increase from there manifold. So basically, cut in half for the real world.

I never had a transmision fail on a Crown Victoria or Grand Marquis, owned three in the past and two currently.

On heavier cars with automatic transmissions, deeper gears are the way to go. Don't waste your time with 3.55 or 3.73s. Those are for lighter cars like a Mustang. Go for 3.90 or 4.10 gears, believe me you won't regret it. You get much more torque off the line and with an overdrive gear you can still cruise on the highway and get decent fuel economy. With 4.10s I get about 2300 RPM at 70 MPH. If you slow down a bit on the highway you can make up on the gas mileage if it means that much to you.

Thumbs Up and wishing you a good weekend.

Thanks for this video; i'm gonna look at a '11 this weekend. Please tell me this on the 2nd gear trans check. At my auction, we are not allowed to drive the cars. If i jack up the rear end, can i shift through the gears and find the same results as if driving it? thanks

Gears, is the "best bang for your buck" with these cars,the 3.55 or 3.73 makes a world of difference!

I enjoy this guy. Hope he gets an 05 Crown Vic someday so he can speak specifically to my inherited Vic with 55K miles. (I'm serious.. good info is good info.)

Good vid, man. I enjoyed it. Got any recommendations on where to go for a tune that doesn't cost $550? -Chris

I feel with transmission issue depends on how well you have taken care of it and how you drive. Mine has 435,037 with original trans and it still smooth.

Love the Vid man, what WHP are you looking at with the 5.4 (with cams and throttle body upgrade),new trans, cat back exhast? I’m thinking of 4:10 gears too, just trying to leave the light faster lol

great channel! i have a mint 2004 lxsport. does any of this apply to me? or is it a whole different animal?

Great video man

I got a 08 vic and if i get the bigger plenum and the bigger throttle body(fly by wire) do i have go to a shop for the tune or would a plug in tuner work?

Hey bro I just subbed and hit the bell. I’m pushing a 97 GM. I wanna know more about that J Mod. Should I do it myself or pay someone.

i have a 07, p71 i don't think i need to mess with mine for the most part i want to do a cat back on it to get the growl back but other than that maybe a cool air intake other than that i want to paint it black and get the rhino brush guard for it

i have all the above,getting a 100 shot of nitrous hooked up at the shop now,the going to get it dyno tuned.

Was good man...quick question what model and year is the throttle body 5.4

Oh sweet. Hell yeah.

This guy knows his stuff

What spacer did you use for the throttle body

Yo bst I replaced my my intake manifold, and every time I pour coolant in it always leaks in the back of the engine bay it’s leaking on top of the trans any ideas

I had a crown vic p71 adtr.net expensive but I'm telling u them guys r very knowledgeable... What's the vote on the steeda under drive pulleys I never did it but read up on it and read some stuff about battery charging problems and cooling problems

Why do you need a tune on the 05 & up but not the older ones?

Great Channel!!!!!!

good advice!!

Best description ever

Anyone have a link to the FORD camshaft and lifter kit for a 2008 crown Vic / flex 4.6 , doing it myself just for fun but can’t find the FORD ones

Been look for a nice rally car for the weekends, and i got an 03 for like 300 bucks. It was in good condition too, just curious on what your thoughts might be. Is it worth turning into a rally car?

I would love for you to do some work on my vic!!!

I have a 2008 Marquis and looking at 40 series flowmaster and cold air intake. Also will probably get a tune. What do you recommend to add extra horse power?? I'm not that much into the lingo so I need help lol.

I put a spacer in mine and it ran a little wonkey. So I unplugged the batt to reset. It took a few mins but it ran better.

Good vid bro

2011 grand marquis with dual exhaust and steeda pullies. Is there one more mod I can do without a tune?

I’m looking to get a good ol Vic and this video may be old but it’s where it’s at

i have the single exit exhaust, do i really have to increase my pipe diameter to get a real hp increase from my cams and TB

Where did you get the info for the rear upper control arms

Crown Vic’s, Gmarquis and town cars are the last of the modern hot rods/modern classics. Chevy has a few dodge has a few but for me since I already own a 97 Gmarquis and just got a 96 p71 I figure buy a few more cause before long people will want more for them cause they will realize what they got. If your thinking about getting one- get it before someone else does, or me :)

I have a 2003 Vic LX, wanted to go to 373 posi........was told that I need to change my drive shaft to aluminum drive shaft..... is that true?

Where did you get the intake manifold spacer... not the the throttle spacer

I'm running 410s jmob Marty tune on 05 and 07 running 3.55s jmod and Marty tune as well

'06 and up stock TB spacer has comb structure covering about 1/3 of the hole. Remove. That by itself will increase throttle response off the line. Not sure what hp gain if any but the motor will feel livelier at all speeds.

This is for the normal crown vics. Or also police interceptors? Just bought the interceptor. Gearing and computer programming are different.

I have an 01. Is there any significant difference in yours vs. Mine under hood?

So I got 2003 Vic just wondering if I can put headers on it or should I stay away from them? And if I can what's a good brand?

What junk yard truck rear will have 375 or 410 rear?

Did you put marauder rims on? They're beautiful

Just put glasspacks on my 08 vic and omg it sounds so good

Also HP with out tune with just the BBK 78mm plenum is more like 4-5hp with out tune with a tune I’ve seen on dyno like 8max

what kind of performance trans would you recommend? the 4.6 comes with a 4R70W what other trans could you put in there to match the ECM/modules etc? unless you have it rebuilt shift kit and stall added? best mods for CV #1 3 pc underdrive pullies .. #2 adjustable fuel regulator set to 40PSI #3 Trans cooler with J MOD. #4 DEMON Coils. #5 The Big 3 wire upgrade.

What is a good heavy duty trans for an 03 vic p71? Im looking to be good up to 400hp

Cool

whats the purpose of those spacers?. i have 2000 and a 05 p71

I clicked on the video because I have been looking for a cowl induction hood for my vic. Where did you get your hood?

Yes sir 04 and later, everything you do intake wise tune tune tune, otherwise will run like 💩 then you will experience limp mode 😥 not gonna have a good time, you seem to know your business bud i hope you succeed, you deserve a bigger better shop, it would be interesting what you could accomplish with a few lifts and specialty tools, "subscribed" just now

You definitely need a tune with the bbk. With the stock cams it was ok but once I added the plenum and cams it needed a tune hardcore.

What actual intake you going to run on your 5.4L?? The 4.6 with spacers? Or the truck intake? You should have touched on that.

I would bet most people don't realize how much power over stock a simple tune would make. Most cars will see well over 30 hp at the wheels with just a proper tune and all the little mods would only help that even more.

What junk yard trucks will have the 375 or 410 rear? For 01 p171

How do you gut the intake plenum

Is that a fiberglass hood or a scope ad on ? Looks great ! Where can I find a fiberglass hood for my Marauder?

My brother, I have a 2004 Mercury Grand Marquis. Can any of these mods fit or work for that car?? Looking to start building a beast but I'm not sure where to start.

Can I put BBk throttle body on my 98 crown VIC?

I know this video old but what hood you got on the vic in the thumbnail?

Hey , I’m looking to buy a ‘07-‘11 crown Vic , if I get my hands on one in good condition how much do you think it will take to get it to 350-400hp ?

Just bought a few 2011 P7B, i fuckn love it...thing is a highway BEAST

If you change the rear end to 4:10 gears and posi eaton gear drive that will wake it up. Yes a tune is a must

Just wanted to throw this out there. On 03's you cant do the intake side stuff (not even a good cold air setup) w/o a tune. The computer can't handle the difference in increased airflow and you'll wind up w an extremely lean condition. (I know from personal experience!! ) You'll either need a tune, or a piggy backer that will adjust for the increased airflow. Just a heads up.

yo how much hp you running? this thing sounds nice!

I thought about getting those performance rear control arms for my 03 but worry about the ride bein harsh with polyurethane bushings

Bro how much would you charge to do all of this to my crown vic

I want to change the suspension on my 08 crown vic can I put ford ford f150 sus

are the 5.4 and the 4.6 heads interchangable??

What tuner are you using

How about dropping a Coyote 5.0 in one. Now that would be sweet!! :)