These are my Top 5 Tools I wish I would have bought from Harbor Freight from Day 1 being a Mechanic!
Пікірлер: 589
@805gregg5 жыл бұрын
I'm 70 YO, I don't need a tool to last 20 years, I almost only shop HF, plus their tool have gotten much better in the last few years
@deucerider4303 жыл бұрын
Turned 69 this year - that phrase “Lifetime Warranty” doesn’t have the same ‘glow’ as when I was 25! Hell - I’ve outlived a number of those companies that sold me “Lifetime Warranty”
@jessihawkins91162 жыл бұрын
@@deucerider430 never would’ve thought I would’ve outlived sears though 😕
@brianwaiting7899 Жыл бұрын
Who ever bought the company that bought company didn't wash its had of warranty where its made prolly changed 😅
@samwittstruck.668510 ай бұрын
The big name tool trucks have lowered the quality to remain price competive. It is about price point and profit margins .
@ayooo24927 ай бұрын
Yo me too yo
@johnmurphy21635 жыл бұрын
The 1/2 inch extension ratchet is awesome. Took mine straight from hf to the junkyard with a 4 foot bar to pull a rear axle 2 years ago used it about 10 times last week. Once to pull a tire off a backhoe another time to pull an engine and transmission and it hasn't let me down yet.
@lendaryreviews4 жыл бұрын
What a freaking amazing review. Been truthful and saying . How you wish you bought them. Make me feel better about some choice. (Not all of them) but some amazing reviews here! Thank you! So much. !👍👍👍
@rickwalling11482 жыл бұрын
You helping out a new tech with that socket set was worth more then the small cost of that set! Great job and that will not be forgotten by him
@ppap3513 жыл бұрын
For digital meters, I use Fluke.
@realmadstupid3 жыл бұрын
Congratulations
@robertpryor72253 жыл бұрын
Fluke is an unfortunate name choice
@FeArhsma213 жыл бұрын
@ppap351 Agreed Fluke is the best you can buy as far as Multimeter are concerned.
@ta21015 жыл бұрын
I work at Goodyear and do A-LOT of tires and rotations... For about a year now, I have been using the $39 lug nut socket set with my Ingersoll Rand Titanium 1/2 impact. They have held up VERY WELL.
@JMRSplatt2 жыл бұрын
I like this type of video.. especially in 2021 with tons of new DIY guys... sure you might have selected some specifics that lots of DIY's won't ever need, but some good stuff and very helpful! Thank you. Hope you can make some newer ones.. I'll look through your videos too. :)
@The52brandon6 жыл бұрын
Something I learned from a couple KZfaq videos and confirmed myself over multiple units, Spend the $18 and pick up a set of leads from ProbeMaster. The continuity testing improvement was SUBSTANTIAL.
@justinsuydamjs6 жыл бұрын
First time I’ve stumbled upon your channel. Rage plays, I’m hooked.
@JustinDowDIYcentralhighway6 жыл бұрын
Welcome to the Party brother! Cheers!
@BEARDEDYAKIN6 жыл бұрын
Great top 5 my brother and another great video.
@georgecrutchfield98507 ай бұрын
Thank You for your service.
@hardtruth20395 жыл бұрын
Harbor freight has its place for sure. I have the 3 ton low profile floor jack and it’s great. Also bought the $75 electric pressure washer to wash vehicles and trailers and it’s great as well, tip is to get the 5 year no questions asked warranty for $7. Straps, tarps, and some of the big drill bit sets are good as well.
@Chevy-hw6lw3 жыл бұрын
The opening of sleep now in the fire. Immediately gave you BIG thumbs up 👍🏻.
@briankoundry34015 жыл бұрын
Thank you very much for your videos I was a working mechanic for approx 12 years owned only snap on and mattco tools now 30 years later i am back into it for me I tried out harbor freight hand tools and to be honest the stuff I had to replace I did it with harbor freight and have been very satisfied and the cost is awesome anyway that is my 2 cents take care and have a great day . BK
@cullenhopson94402 жыл бұрын
I’m an industrial Pipefitter/Welder I have many harbor freight tools and one of the main ones I use a lot is the 1/2” extending ratchet, biggest bolts Pipefitters bolt up is 1-1/4” and with that ratchet and the 3 main sizes of sockets we use and a spud crescent for hole alignment and backup I’ve bolted up and installed and removed MANY valves and flanges, always look for a way to make your life easier
@Pyridox6 жыл бұрын
Thanks for sharing your insight. HF has upped their game with a lot of their tool line. They just came out with the Ames line of DVOM's.
@ZN24113 жыл бұрын
I bought a Snap On soldering torch and after doing some research found it was made by a company by the name of Portasol. Half the price for the exact same product. I have made sure that a few of my coworkers went that route instead.
@TheDisgruntledMechanic6 жыл бұрын
Good comparison Justin. And I agree on some tools HF is just fine.
@hamilton50713 жыл бұрын
Harbor freight is definitely great. When i first started out as a mechanic i had a decent set of basic tools. However my first day i was thrown to the dogs. Everything from suspension brakes and steering to engine work and diagnostics. I learned i needed alot more tools and i needed them fast. Harbor freight was the answer. Now later in my career i definitely love and notice the difference in tool truck tools. That being said i still love Harbor freight and still have plenty of their tools but upgrading lots of tools where i see a need to for matco and mac. (No snap on dealer at my current shop)
@fatharold1788 Жыл бұрын
you work at a dealer?
@XX-sz6qh Жыл бұрын
@fatharold1788 it can happen anywhere, I went to an interview thinking I'd be a forklift driver. Then boom, im now a diesel mechanic, and got trained from the very beginning bc I was never a tech before. Almost a year now, and I know a lot amd love it
@aob.aob832 жыл бұрын
Alot of tools from harbor freight are super good my dad has had a impact socket set from them for more than ten years and they are awesome still like new we use them often we do alot of our own work on cars.
@gregoryhan164 жыл бұрын
RATM intro song, honest reviews by someone who uses their tools professionally as opposed to "torture testing" them. Pretty much always clicking on these videos when they come up in my feed.
@donaldhollums32786 жыл бұрын
Mega-kudos, Mr. Justin, for your willingness to overlook the brand name on a tool for the value that would be included in what consistently gets the job done. Yeah, some tools at HF ain’t worth the money, but you’ve proved some can be.
@waynelutwiniak23066 жыл бұрын
Rear disc brake caliper tool from H.F. my absolute favorite purchase. 40 bucks. Works as good as any other and has adaptors for almost every car.
@robertfrate97382 жыл бұрын
Hi Justin, I’m semi retired I mostly used craftsman and some so and Matco, in demo and construction I used hilti Milwaukee and Mikita, now that I’m semi retired I use hf for everything and they get the job done like any other brand name tools, I don’t have to spend tons of bucks to turn a bolt lol, I had the same stuff you have just from hf and never had a problem with anything, I’m mostly using Pittsburg impact sockets and hf impact cordless tools and they hold up awesome and get the job done with ease, in my time I’ve delt with the so dealer and kindly declined there tool price and there attitude was absolutely atrocious, this is a public service person selling “top quality tools” I don’t and will not deal with so, excellent quality video ty so much, Bob,
@RadDadBMX6 жыл бұрын
Dude love these videos.
@cecilioramirez99675 жыл бұрын
New suscriber. Love your videos. Thanks for making and sharing your knowledge. :)
@JustinDowDIYcentralhighway5 жыл бұрын
Thanks for your subscription and welcome to the channel. Cheers!
@rawbacon5 жыл бұрын
Been using Harbor Freight tools for around 30 years (mail order catalog back then) and always had pretty good luck.
@jcaleca603 жыл бұрын
Me use harbor 35 years
@erikpayne82023 жыл бұрын
@@jcaleca60 wouh guys he's a veteran
@jeffreydevoti70003 жыл бұрын
I've said the same thing on line before. Also ordered a lot from J.C.Whitney 40 years ago from catalog. Think it was a mistake stop printing it. Easy to find things you didn't even know 🤔 you needed.
@rawbacon3 жыл бұрын
@@jeffreydevoti7000 J.C. Whitney was the best. Thousands of items, I could look thru those catalogs for hours as a kid dreaming of the day I was old enough to have a car.
@Dcc3575 жыл бұрын
I love Cornwell boxes. Next week I'm getting a 54 inch Pro Series with a key pad lock. It'll be like a safe lol.
@markbenoit5 жыл бұрын
For going gear set up I got the clam shell puller for Randy ring and pinion, was worth it pulls the bearings off no damage.
@jamieprice1265 жыл бұрын
harbor freight has really steped up there game there tools are good and cant beat the prices
@stevensobba17854 жыл бұрын
🥴darn , ... you would have just purchased 🍺 beer with that money, 😉. Thanks for the production and your presentation.👊🏼. 🌻
@jamesshea45343 жыл бұрын
Boughten. Not purchased.
@pinzgauer75916 жыл бұрын
Great vid, for automotive use I’m sure the Harbor Freight meter is a good choice, how ever if someone is thinking that this would make a good electrician’s meter, I wouldn’t trust it to measure 480v just saying.
@pontiaclemansgt6 жыл бұрын
As a machinist I can without a doubt say the .001" dial indicator from HF is worth every penny! I got it just for shits and gigs. Turns out it reads exactly the same as my higher dollar .001" dial indicators and .0005" test indicators. It is my go to indicator now! It doesn't scream quality when you look at it but it is dead nuts. The only real con about it is a slight increase in resistance towards the end of travel but for 99% of stuff that wont matter and if it does you shouldn't be using a .001 indicator ha. The mag base is alright too. The knobs blew out after a couple of months of daily use but fuck it.
@JustinDowDIYcentralhighway6 жыл бұрын
That's Awesome Brother. Cheers and thanks for sharing!
@joepollock91516 жыл бұрын
I totally disagree. If your using it professionally it's mititoyo or starriet. The quality, finish, tolerance is no comparison. Also, if it is a digital caliper, the cheap ones go through batteries. Mititoyo barely use any power when turned off.
@kingkong89746 жыл бұрын
Joe Pollock as a mechanic.... You can also change the battery.... So ha, depends on profession. But I'd use a more accurate tool for certain engine work. Otherwise it's very good
@PhantomPotato5 жыл бұрын
As a millwright, starrett and mititoyo are overpriced especially on the mag bases. Nothing beats a harbor freight mag base. Lot cheaper and just as accurate.
@drizler5 жыл бұрын
I use the electronic micrometer more or less every day. I Absolutely love the damn thing. Just make sure you get the one that does the push button conversions between metric fractional and by the thousands. They sell another one but it’s not nearly as handy. $10 can you catch one on sale and if you just take care of it and put it back in its box it’ll last for many years and take a smash it.
@TheTech6605 жыл бұрын
Still using my 1/2 inch impact Pittsburgh Deep Sockets since 2004. Best impacts till this day!!!
@pnp5225 жыл бұрын
I have a set I got in 1982
@ZVPieGuy4 жыл бұрын
The sockets are good enough in quality but the set skips so many sizes, including a lot of very important sizes.
@Itsgonnabeme-x7p3 жыл бұрын
Yup best 19.99 I ever spent. My 7/8 socket took 18 years to fail...thats a lot of lug nuts
@josefelix41524 жыл бұрын
I got a fluke for 40$ at a pawn shop 15 years ago, it still work perfect but it doesn't measure amps so I got the 20$ centech dvm from HF to use the amp meter, and I notice it can read up to 20A Wich is very nice
@smitty2jones4 жыл бұрын
Hey, I bought my bearing/race driver set from HF about 15 years ago when I started at Sears Auto Center! I've beat the hell out of it though, and it barely resembles a driver set now.
@donaldpainter6283 жыл бұрын
I bought a great meter from field piece it has the clips it has the thermometer to find temperatures and it has a magnit to hold itself somewhere 79 dollars but it's a great all around meter
@uonadtehrrocks3 жыл бұрын
This video should be more popular, I vote for a part 2
@JOEZEP543 жыл бұрын
Nice comparison. I find most of their hand tools are ok. Some of their electrical are hit or miss. Pittsburg tools lifetime warranty & the few times I had to use it no issue with the replacement. Stay safe, Joe Z
@indianftrtard78995 ай бұрын
Actually all of their hand tools are lifetime warranty. So that includes Pitts, Pitts pro, Quinn, Doyle and Icon. It's also an extremely easy warranty to deal with. I have never been asked any questions just told to grab a new on off the shelf. They open the package grab the socket, bit, extension or whatever and you are on your way. The sell the opened now incomplete package at a discount.
@JOEZEP545 ай бұрын
@@indianftrtard7899 I did not know about the lifetime warranty on the Quinn, Doyle and Icon tools. Local manager told me the Pittsburg was the way to go for the lifetime warranty.
@joshromero875 жыл бұрын
This video made me subscribe to your channel I like your honesty sir
@mattmgarza3 жыл бұрын
Thanks for sharing your wisdom
@kentbarger86283 жыл бұрын
I'm a retired auto mechanic I'm retired now when I used to work on cars professionally I used to use a long metal pipe to break loose the very tight drive axle bolts and other real tight bolts I have an assortment of different link types I break them loose using the pipes just really helps on keeping the tools from getting runt and your tools will last you a lot longer if you do not abuse them everyday with impact gun everyday just take it really good quality breaker bar with your socket and loosen it up using a long piece of pipe it works really good and once you get a loosens you can use your your impact gun to take them the rest away off this just helps you so that your impact sockets last you longer
@Tbizzh4 жыл бұрын
I've got the Ames meter. The original probes were annoying and the metal part kept slipping into the lead. I got a Klein replacement test lead kit for it and now that's not an issue, and I've got alligator clips now.
@craigmonteforte14784 ай бұрын
Great Tips and Advice Another good one at HF are their Orange Deadblow hammers i think they are Pittsburgh branded and i buy them knowing they are my Sacrificial Hammers for beating on Suspension kits and parts etc for 35 years i wasa Custom Woodworker so i have other Dead Blows. i keep for “Clean” Work like installing Cabinetry i’d also like to s a video on maybe your opinions on some of the HF. higher End Tools like Icon compared to the Tool Truck Brands now that they are kind of Trying to Compete with. the ones you pointed out in this video are similiar to HF Impact Sockets they Work and have gotten better about Lifetime Warranty on the Pittsburgh ones if one should fail. you can now exchange them fairly Trouble Free at a local store
@gatekeeperofchaos6 жыл бұрын
Another great video.
@boystoyz89224 жыл бұрын
Love the rage a,t,m at the beginning 👍
@patcb8296 жыл бұрын
Enjoyed the flurry of videos this past weekend.
@boosted2.4_sky6 жыл бұрын
There's a lot of stuff like this that if you look around a brand name will have it for 150 to $200 and if you look around you'll see it's a tool that's made by one manufacturer and 10 people sell it ranging from $30 to $200
@vinmandich7756 Жыл бұрын
26 yr professional mechanic here who use to have a addiction to tool trucks sunnex sockets rule from my past experience there impact sockets are nice
@TheCrain3 жыл бұрын
Getting more than 1 tool for $100 from snap-on is a win in my book. Good tips brother.
@peterjones69456 жыл бұрын
Snap-On is a re-badged Fluke. In workshop a 'cheap' meter is usually a better idea as it will get dropped, etc.(although Fluke are REALLY robust) For basic voltage checks, the $5.00 HF is as good as anything but the leads will break 'quicker'
@nordicpride97082 жыл бұрын
I’d disagree. A true RMS meter like Fluke is much more accurate vs any cheap Voltmeter. I have two cheap ones and they have different readings. Bought a Fluke 115 and it’s true RMS and spot on accurate.
@averageskill6 жыл бұрын
I tried to make an instructional video the other day and sucked at it. This guys a natural. Maybe it's the Coors Lighten.
@JustinDowDIYcentralhighway6 жыл бұрын
lol It does take the edge off when filming that's for sure. lol Cheers!
@richardfowler32545 жыл бұрын
HAHAHAHA :-)
@akbychoice3 жыл бұрын
I agree. Most people have no idea how hard it is to make a well presented video.
@rayworx3 жыл бұрын
True happening.... I worked as a line tech at a major Honda dealership in the Sac. Ca area. This was in the late 1980's. Junior tech comes to work and has limited tools..... he's just starting out so I didn't think anything bad about letting him borrow a few things. The standard line was 'you have to borrow it 3 times... you need to buy it'. So he needed to borrow a pry bar. Mine was SnapOn and the next week he borrowed it 2 more times. I reminded him of the 'limit' and he was good about it.. went to HF and bought a set of pry bars. 'Good for him' I thought. The first time he used the HF brand new set...the big bar bent! This wasn't anything abnormal the use.... my SnapOn bar was fine on the same kind of job and it didn't bend. Granted he spent less than half but his bent. TMSAISTI. Thats/My/Story/And/I'm/Stickin'/To/It
@paulrooster21083 жыл бұрын
Yep about the same time frame I bought that HF pry bar set an sure enough the big one damn near bent in half , the rest of them the handles cracked , or worst yet if you got any type of cleaner on it they would start melting an turning gooey.
@robertpryor72253 жыл бұрын
It's a guesstimation game with HF, you have to consider your needs, safety, materials, production processes like forged vs cast you might save a bundle or you might end up buying twice. It's not smart to go to Vegas but it is fun.
@billbeckett10216 жыл бұрын
Great vid!
@ronsbeerreviewstools43616 жыл бұрын
This is a very good price wise tool comparison . Iam an Electrician, and Klein is my go to hand tool co.. On electrical testing equip. its Fluke. And Fluke has that magnetic holder for the back of my VOM meter, which is now a must to have, once youve worked with the magnetic back strap. But as a big DIY , I buy a lot from HARBOR FREIGHT. Now time for a cold bottle of beer !
@JustinDowDIYcentralhighway6 жыл бұрын
Amen to that. Cheers!
@Azlehria5 жыл бұрын
My electrical tools are a mix of Milwaukee (pliers, strippers, screwdrivers, power tools), Jonard (can wrench, Scotchlok pliers), Greenlee (scissors), Southwire (backup scissors), Ideal (conduit benders) and Commercial Electric (punchdown, mod crimpers). The only Klein tools that I've kept because they didn't fall apart are the VDV Commander, 240' Depthfinder tape, and T5-1000. The T5 grew legs, so now I just buy disposable meters as needed. Not very important in my line of work - mostly for testing camera power supplies. Low voltage stuff doesn't tend to be testable like that. My professional automotive tools from a previous life were mostly a mix of Duralast (ratchets/sockets, wrenches, pliers) , Pittsburgh (impact sockets, brake tools, etc.), and Central Pneumatic (air tools). Never had a failure, but a lot of them also sprouted legs over the years.
@That_Handle6 жыл бұрын
00:18 - What are the ribbed sections? My rudimentary understanding is that flow is related to the flow surface and the bends as well as those sections of the header appearing to be an added layer of complexity. What purpose do they serve and what determines the use of the design?
@joelopez40oz236 жыл бұрын
As a newbie in my automotive career I made the mistake of buying axle nut sockets individually from Snap on. Now that im at the Dealer I only use about 2 or 3 of them. Wish i would of went with a cheaper brand.
@boydtsosie71406 жыл бұрын
Appreciate the honesty! Great content
@JustinDowDIYcentralhighway6 жыл бұрын
Thanks Brother!
@gregblau80825 жыл бұрын
Have you tried checking milliamps with either of those? I have the same klein and have trouble checking battery draw with it. Besides that I am happy with it but wish you didn't have to switch to dc & one of the alligator clips doesn't stay put.
@paulp63866 жыл бұрын
You should have been an Aussie. You have a beer in every video. Love your style :)
@JustinDowDIYcentralhighway6 жыл бұрын
Paul P lol Cheers Mate!
@1978garfield3 жыл бұрын
I like the display on your Klein meter better than the HF. I hope HF sells the magnetic hanger separately cheaper than Klein does. I use the alligator clips all the time so not having them is a letdown. Maybe HF will come out with them as a separate sale item (that also happens to fit the Klein leads). BTW I have an older Klein meter and I love it.
@CrimFerret5 жыл бұрын
The first four I can totally agree on, especially if you're only using them occasionally. Now with the multimeter. On that one I'd actually not want either of those. I'd go with Fluke or possibly B&K. The reason is that that's a tool that you'll use for a lot more than automotive mechanics so it's worth having a good one. Secondly is safety. If you screw up and round off a bolt, it sucks and costs time and maybe busted knuckles. If you screw up with electricity, you can die. You need to know the meter will actually stand up to what it claims it will and has proper protective circuitry in case you do screw up.
@JustinDowDIYcentralhighway5 жыл бұрын
Everyone in the Shop owns a Fluke. I just picked up a Snap-On off of Ebay. Any idea who re-brands it?
@danielbackley93013 жыл бұрын
Still prefer my amprobe. Also Justin the Klien goes ac first because most electrians work with ac not dc the going ac for the default is a safety feature.
@CrimFerret3 жыл бұрын
@@danielbackley9301 That makes sense. There's a line of meters specifically for HVAC people that I can't recall off the top of my head that are really good. So are Agilent meters. None of them are cheap though.
@snapmac55476 жыл бұрын
Good comparison!
@chrisj1974386 жыл бұрын
What are the warranties for the kits bought off the truck versus kits bought at harbor freight?
@risersgarage70045 жыл бұрын
Bought a Harbor Fraud chop saw in high school, gave it away when I bought a new Dewalt. It died about a year later bought a Hitachi and neither doesn't compare. That HF is still cutting metal.
@jessegonzalez74545 жыл бұрын
I've had bad luck with fluke products their digital readout fades and the repair doesn't last!
@whysoserious70142 жыл бұрын
Tool truck guy appreciated you contributing to his tool truck loan payments.
@jeremyTallen12 жыл бұрын
as a mechanic that flips cars I love the fact I can do a job like ball joiins. I go and buy the ball joint kit from harbor freight and when I sell the vehicle It pays for itself plus the profit from the sale. Honestly I wouldn't even know where to go to buy a ballpoint kit etc. My stepfather was always in debt to the tool truck growing up. We always had to go without or just barely scrape by because of the tool truck payment. It always made me have a sore spot towards the Snap on Truck.
@luisquijano61685 жыл бұрын
Thank you for your video it help me .
@JustinDowDIYcentralhighway5 жыл бұрын
Luis Quijano Glad I could help 🍻👍
@cleanasdirt68325 жыл бұрын
I am not a mechanic, but I really enjoy this channel.
@JustinDowDIYcentralhighway5 жыл бұрын
Thank you very much. I appreciate the kind comment.
@alekmartin99992 жыл бұрын
Same here .i watch lot of bad stuff but dont do bad stuff
@waynetate69406 жыл бұрын
Good review.
@cjphillips66483 жыл бұрын
Like the pelican case, could you do a review on the lift cary
@cjphillips66483 жыл бұрын
Lirt cart #93116
@brennanstokes86293 жыл бұрын
I personally would settle for anything but a fluke meter , but definitely understand the use of cheap meter to start off
@melgross3 жыл бұрын
What’s wrong with Fluke? I have several different ones. Never had a problem.
@scottjohnson32263 жыл бұрын
@@melgross I have never bought anything but Fluke and five bum meters that I need to send back and have repaired. I am so fed up with Fluke that I can't stand it.
@dtester3 жыл бұрын
@@melgross I think that was a typo, he "wouldn't" buy anything but fluke
@deeneyugn48243 жыл бұрын
Amount of beers you can buy if you went with HF is enormous.
@poonbandit99242 жыл бұрын
You see the all kinds of good techs running anything from the cheapest to the tool truck. For me at work I use mostly tool truck brands and a few chosen cheaper things on non high use items, but at home I work with a much cheaper set of anything from harbor freight and old craftsman(USA made) to tool truck on a few choice items, I can do the same things with cheap tools
@darwindropmazda6 жыл бұрын
Good video brother 👍
@jaw38952 жыл бұрын
Thanks brother👊🇺🇸🇺🇸
@kingkong89746 жыл бұрын
Where did you get your 2', 3' and 4' 1/2" extensions?
@rbarr12003 жыл бұрын
Great content
@modernneanderthal69706 жыл бұрын
Honestly, my HF professional series breaker bars have served me way better than my Snap-off ones. I dont even really step foot on the tool trucks anymore unless I absolutely need something specific from them. 16 yrs auto mechanic, motorcycle and now heavy equipment mechanic
@nightcoder5k6 жыл бұрын
Where did you get your toolbox rubber liner? Do tools on it roll around easily when you push the tool box around? Helpful video, thanks!
@JustinDowDIYcentralhighway6 жыл бұрын
CODER QN it came with the Tool box
@justinferguson54513 жыл бұрын
Harbor freight has really stepped up in the past 8yrs their icon line has caught my interest, if you are the DIY-er in the driveway on a Saturday then HF will serve you well. My hand me down dewalt cordless set my dad give me was half crapped out when i got it, i bought the bauer 20v lithium im trying now and seems to be working good. I couldn't find any good reviews so i jumped in and im the guinea pig
@asyut13192 жыл бұрын
How’s that drill going?
@toolinhand6 жыл бұрын
Just chalk it up to a learning experience. Imagine if KZfaq was prevalent many years ago, you would have had that slight advantage at your purchases. We all would have.
@canadian_wolf83953 жыл бұрын
For anyone who lives in Canada get master craft tools. They have no questions asked lifetime warranty. I was beating on the box end of one of my wrenches with a hammer to get a bolt unstuck and collapsed the box end and bent the whole wrench and I brought it in and showed them proof of purchase and they have me a new one not a single problem👌
@sontagfamily56115 жыл бұрын
Would that Harbor Freight indicator be able to be calibrated year in and year out? Our company calibrates precision measuring tools and torque wrenches yearly and my stuff passes. I
@jerrybowman55465 жыл бұрын
Good vids man
@jayjohns56533 жыл бұрын
“Amprobe” brand electrical measurement tools. My DVOM is over 30 years old. It always works and it is always accurate.
@stevencsawyerss6 жыл бұрын
Very helpful, thanks!! :-)
@neill.m.herbert2 жыл бұрын
Any update on how the Ames multimeter is holding up?
@devoncoolman885 жыл бұрын
We all fall into the groove/trap of gotta have snap-on/matco/mac/cornwell/insert name brand here. While it’s nice and a set of snap-on axle nut sockets is better then say a hf or sunnex set. But they will all perform just as well and provide many many years of service for a fraction of the cost.
@fernandofernandez79253 жыл бұрын
Great production accept for the beer 🍻 has no business matters
@christophlorne6333Ай бұрын
**except**
@MYMAKO1814 жыл бұрын
Some folks call it a Sling Blade I call it a Kaiser Blade.
@Camoburb3 жыл бұрын
Thank you for the info. Wanted to pass on a tool NOT to buy at HF. I bought an inch lbs torque wrench for a specific job and thought I'd save a bit on a tool I will rarely use. After stripping out the first bolt and not hearing or feeling the familiar torque wrench click I stopped. It seemed like alot more force needed to reach 9 inch lbs of torque and I was right. Took it back to HF and invested in a decent torque wrench. The difference was amazing. Love HF but not for everything.
@nordicpride97082 жыл бұрын
They call it a “legacy” tool. One which you can hand down 👍🏻
@hardset-vi3ze5 жыл бұрын
Did you mention anything about the acid test....time!!!? How long will they work???? So your comparisons leave soooo much to chance.
@jasonvince35346 жыл бұрын
Good video Justin
@zew14142 жыл бұрын
I couldn't agree more on the axel but set! Even if you just buy those impacts one by one it's maybe even cheaper!?
@VOODOOphg3 жыл бұрын
Is it just me or all of those tool truck deals you got pretty damn good? The Matco set for $80 to $90 seems very reasonable for a USA made Matco with those large sized axle nut sockets.
@VQ1whales6 жыл бұрын
Im havin that beer... good to go with H,B.
@lyndonmansell3512 жыл бұрын
How would you recommend HF over Klein ? Bigger display, an extra digit , clip on alligator clamps , plus the name .
@Burnit532 жыл бұрын
Boughten. Is that some bumpkin code for purchased?
@chuckschillingvideos5 жыл бұрын
fyi...you can easily purchase multimeter probes of pretty much any imaginable type very cheaply on eBay. I wouldn't use the lead as the basis of any comparison between multimeters.