This High-Torque is now out! homedepot.sjv.io/a1AQ4Z Ryobi called and said we should re-test with "this" battery, so we did: kzfaq.info/get/bejne/lcyXbJWF2ci9Yo0.html To clear up some confusion, this is Ryobi's HIGH TORQUE 1170 FT-LB model. Not their P262 Mid Torque 600 ft-lb model. We busted our rump to try and get this out today. We DO NOT accept endorsements, gifts, or anything from brands. Since we get asked a lot about this, If you purchase anything from our Teestore and FWD your our order email to Torquerank@gmail.com you'll get a link to all our live updated rank lists

I really like that you don't accept manufactures free products even if they don't require a review. Many manufactures are known to send better, clean units for review compared to what they sell to consumers. So by only buying units available to consumers, I know that what your reviewing is the same version that I can buy. So thanks TTC

I used kzfaq.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell

I have this impact. I run all Ryobi tools at my house. I’ve had their basic drill and impact for almost a decade now and the drills and batteries are still running strong. I also have their hammer drill, air compressor, this high torque impact drill, and all their bits. For the average joe who isn’t using this stuff everyday, their products are perfect.

I know Ryobi isn't always the best, but I still love their products for the range of what they have in the 18+ line and generally decent quality for non-professionals like myself. I'm glad to see this new impact do well!

Those new ryobi batteries are powered by the tears of the dewalt fan boys.

I just got this because my Motor home has 1 1/2 luggs. I needed to check the oil level in my front wheels and first tried to do it with a breaking bar and almost $hit my pants and gave myself a hernia. This got all luggs with in seconds. Ryobi is the best in the RVer's market with universal batteries usage and tons of affordable products. Stuff I don't use everyday, but when I do it get sthe job done well. Now if I have get flat I could put the spare on myself. Good feelings!

I never thought I'd see a tool before it's release I'm not even interested in getting one but your videos are really good and entertaining

Most Ryobi tools I have used are pretty much the perfect compromise for consumer use, they are cheap but are still usually good enough to get the job done. This thing seems to pretty much be in that category.

I work on family and friends vehicles and I will verify as an occasional user even on heavy use/duty type jobs this thing is an absolute beast for only $200. I don't know about all day every day use, but for regular maintenance on about 10-12 vehicles... for me it's worth every red cent. I use the newest gen 6ah HP battery as well.

I’d love to see this tested with the Ryobi 9ah HP battery.

Just did leaf springs in a 120k mile Tacoma that spent life in the north east and ripped though every rusted U-bolt nut and leaf to frame bolt like nothing. Love this thing. It's a beast with the 9ah battery.

With this and the new Ridgid High Torque, hopefully it means we'll see the Gen 3 High Torque from Milwaukee real soon.

I've used Ryobi "standard" half-inch (~300lb/ft rated) for occasional car work for years and rarely find a bolt it won't bust free. It's amazing how far the cordless impact tech has come, not even sure I have a use for something in this class.

Thanks for the information. I’m on the Ryobi cordless platform because of budget and their one + batteries. Bought the mid- torque impact wrench in a combo deal, it breaks away & tightens the lug nuts on my 1500 without effort. I’m happy. When I upgrade to a 2500 & my impact doesn’t do its job I’ll upgrade to that one👍👍for what you do

You guys are the bomb, love the channel & content! Keep up the good work!

Always love a good surprise dose of The Beans!

Home Depot's got the Ryobi HP 1170 torque with a battery for $159 online purchase only I hope it's as good as this guy's claims it is it looks pretty honest legit guy doing this presentation

I LOVE THE TORQUE TEST CHANNEL!!!!

These videos are super helpful. HD has the PBLIW01 right now for $159 packaged with a 4.0 ah HP battery PBP004. Watched this video before I bought one.

I used the 2AH High Performance battery on the P262 to compress a pinion crush washer on a GM 10 bolt rear differential. It worked well. I wanted to sneak up on the preload, so I crippled the power of the tool. Or so I thought. The 2AH battery surprised me. It did drain quicker than I was expecting though. The DeWalt DCF901 with 5ah battery didn't have enough beans for the job.

Love how Ryobi has stuck with their line and their batteries to be specific. That whole business with Ridgid ditching the octane was unfortunate. Pretty much killed that amazing high torque they had, it isn’t the same without the octane batteries. I’m tempted to pick this one up. Seems like good value for a quality high torque, it would be my first high torque. Only impact I have right now is the M12 stubby.

I have one of these, they are for sale on home depot's website in canada, have not put it fully through tests yet but I am very impressed.

Would love to see this tested with a Ryobi 9AH HP battery!

if they really need high amperage batteries, you could try to attach a hobby grade lipo used in RC Cars and drones. the 18v replacement should be a 5cell lipo. they are the best at delivering high power, they are just a little fire hazard, picky on how low you can discharge and dont do many cycles. assuming the tool runs on just plain dc without communication with the battery

Nice testing, but I'd like to see some of the higher capacity Ryobi packs as well. I have a few 6ah HP batteries, it would be nice to see how those fare

Awesome video. Thanks for the nice surprise.

I have been using lots of the ryobi one+ tools for the last 18 year+ and they havnt failed me yet, but I don't use the same one every day like tradesmen do. I use a range of them each week and the first drill I got 18 years ago still works fine tho it is a bit down on power

I love this channel, y'all are awesome

Recently I paid $200 for m18 high torque open box. $135 for m18 3/8 extended ratchet open box $90 with one 5ah battery open box for fuel 1/4 hex impact driver open box. And $25 for rapid charger open box. Reliable Deals are out there if you shop smart!

Currently available for purchase on the Home Depot Canada site for store pickup or delivery. Good for anyone that's close to the border or lives up north. 9/21 at 12:50pm Est

LOVE TO SEE SOME TORQUE TESTING of PORTABLE CAR BATTERY JUMP STARTERS! You guys are really setting the bar when it comes to rating anything as most guys I LOVE STATISTICS and appreciate being able to have that confidence I’m buying the absolute BEST tool based on the numbers that are important to me. Once you start sifting through KZfaq and are able to separate the other “Review Channels” that you question if they knew what they were reviewing as they’ve mispronounced the name twice and telling you how wonderful they love this product! Thank you for doing things RIGHT! I needed a jump starter this morning and realized that the 4 that I have were Le still amongst friends and family, so I went on Amazon because I hadn’t bought a car battery jump starter in a hot minute and was curious where the prices were at and what came across my screen blew my mind! There’s got to be 25 different brands which all say 1000, 2000, 3000, 4000 up to 10,000 AMPS! Prices from $28 to $1000. It would be cool if you guys had a way to torque test jump starters, be able to give the real numbers on how many amps and for how long those amps are useable in an emergency. I know a couple of the good brands which I have but there’s a couple off brands that I bet some of your followers would really value that content if you can swing it? LOVE TO SEE SOME TORQUE TESTING of PORTABLE CAR BATTERY JUMP STARTERS!

Ryobi is badass man, I just went with Milwaukee because there is a noticeable difference in power that I wanted but definitely didn't need. Ryobis price point is just hard to argue with for most people.

I saw ONE of these on Saturday in my local store.. They have the entire HP line on display

Iv had my ryobi high Torque for since it was available on the market and it’s been beaten on a shit ton like falling off roofs left outside in the rain over night been run over with tractors and almost set on fire a couple times and it still chugs along like the day I bought it so no complaints from me especially with a abuse it gets

Another great video TTC. I have two requests for future videos: 1. Can you test something like the Milwaukee 7/16" impact driver. 2. Can you include more battery variety in your future videos? I'm interested in seeing how other brands perform with battery adaptors and the best batteries.

Wasup TTC I'm loving the channel keep em coming

I use ryobi to bolt together trailers all day 4 days at the week. I have used it since november 2021 and so far i the onley problem was a battery witch they swapped out at the store. I have nothing bad to say about ryobi. Eaven the co workers was supriced about the sorque on a battery tool it was more torque then a cord tool that we tested on the company witch is mutch mutch more hevyer. i have tested it on about 200 000 bolts and its still going strong.

💯👍 I guess I'm buying something again il never use.. wish this stuff was around 30 years ago.

you are a lucky one to get that as soon as you did. good looking out

I have a few Mac Tools you could test if you'd like. AWP050 (I think) 1/2in air powered impact. HF compact 1 anvil 1/2in impact, and a few Mac Tools red version of the yellow dewalt impact driver and 3/8 impact.

Great product.👍🏻

Fun fact. I'm in Australia, pulled into the big box that retails Ryobi and AEG/Ridgid. Saw the Ryobi rep car and thought I'd stir him up about this one, turns out they're on the shelf down here!

Thank You

Need a couple of the 9ah Ryobi batteries, they make a big difference on my old impact, but adds significant weight.

Glad that I went with DeWalt when I recently replaced my ancient cordless tools. Their new DCD900 is only 70 bucks more than the Ryobi, and it's a BEAST!!!

As of August 2023, You can buy this impact wrench with 4AH HP battery and charger for $169. even though I have a DeWalt High Torque impact wrench dcf899 , I bought this Ryobi as most of my tools are already Ryobi. I love the PBLIW01 so much I gave my DeWalt away to my brother.

In Home Depot Canada, it already available. It look exactly like the mid torque.

Ryobi is a Mid-Duty y’all, it’s in between alright and excellent for heavy duty tasks. Y’all don’t need to criticize a brand or fan boys for having a good tool.

I can't believe Ryobi came up with a high torque and although it's probably good I'm on the rigid platform and the rigid high torque puts out 1100 ft-lbs pounds of tightening and 1500 ft-lbs breakaway, and that's hard to beat with a lifetime warranty.

I bought a ridgid high torque with a 4 max out put battery and charger for $199.00 on sale 3 months ago

Been using their standard 1/2" for 2 years now and it's still kicking, and has only struggled with 1 or 2 bolts over the years. Home Depot has this one on sale for 149 with a battery/charger combo, so I'm using it as my excuse to upgrade. I'll pass my old one down to my dad with a fresh battery.

Yes i bought the high torque ryobi with 2 hp batteries and hammer drill for 159 on Christmas special And I ended up taking it back and even switching brands bc it wouldn't take my lug nuts off that it tightened with me turning a 1/2 1ft socket wrench half turn it was junk

Would love to see this with the 6ah HP battery!

Working as a lube tech at a Chevy/Cadillac dealership, I decided to buy the P262 impact Ryobi and it lasted for about 1 1/2 months, now I have to call and complain about it. The warranty is still active so it’s gonna have to be used unfortunately. But I’ll tell you what, there was never a lugnut that never broken lose. Every one that came in it worked, lmao

I love Ryobi, they are made by TechTronic Industries (TTI) just like Milwaukee in Hong Kong

Try the greenworks IW24L00 impact wrench it claims 540 ft lbs, ... Its super compact, i own one and its barley bigger than an impact driver it seems about as powerfull as our gen 5x ridgid... Its also super cheap.. 99$ i got mine on sale for 72

New and useful information

I am interested in the Lion gun's numbers via its digital display against the numbers of your testing apparatus. I bet they are quite similar.

I came here to check out the Ryobi. I'm leaving to look for a used M18 😁.

That ridgid impact look very much like a Milwaukee to me.

How about testing the Ryboi high torque (or better both of them) with the 6ah HP and/or 9ah HP (Ryobi) batteries?

I just snagged one of these labeled as "factory blem" in store at Direct Tools Outlet for $89.00 plus tax. Their website shows 209.99. What a deal!

Torque Test Channel.. I was given some Ryobi cordless tools as a Christmas gift 3 years ago. I wanted to hate on them but they just work.. Are they the best? Maybe not but for me they work and people keep buying them for me. So until they start not working or they take a dump I will keep using them. Now I'm thinking about getting there 3/8 impact and this new 1/2 impact when it comes out.

Ever plan on testing some legacy impacts? I'm still using a 15+ yr old snap-on 14v ni-cad impact almost every day. Not super powerful but works well for lugnuts and lawnmower blades. I also have their old "micro" 7.2v ni-cad 3/8 drive impact that I just use for bedknife screws.

Everyone always rags on Ryobi but hey it gets the job done, not too bad if I say so myself, I bought a set of Ryobi 18+ drill and 3/8 impact I use them both daily at home and at work, for 3 years now cant complain for the $100 I paid at the time 😂

Dang Ryobi really wants you guys to test their product!

Looks great! thanks for the review. I am invested heavily into the Ryobi lineup, so it's good to know that I have a competitive high torque option available now if I want it. I use Ryobi tools professionally as a mechanic, as do many of my coworkers, and never had reliability issues with them. Great stuff!

@7:13 after testing the Ryobi. The video chart runs to 675 and you said 675. But on the screen next to your torque machine you wrote 673.

Love the spreadsheets. Very nice and organized

I am excited about that new Ryobi

Should try the DeWalt with the 60 volt Flex volt that would be cool I run the flexvolt in my 20 volt tools and it makes a big difference

Nice scoop! I was hoping the rumoured DeWalt DCF899 replacement the DCF900 would be breaking cover by now also, some of the supposed specs so far are 1000 ft-lbs fastening and sub 9 inch length.

Just picked this up for $149 with 2 x 4ah batteries a charger and bag.

Looks pretty good - might end up with this one over the mid torque Ryobi since it is not so massive for a high torque and not much more in price.

Nice review! Not bad for the price...

I have some of those 4ah (and the 2ah ones). Was wondering if I really needed to use the HP ones (which thankfully I do have both a 3ah and 6ah).

Noticed cryobi had come out with a few new tools recently. Was in my local homeless despot and saw a 90* driver which I had never seen by them before and about bought it.

I have the Dewalt, and when I need a bit more power, I use their new 8ah battery I picked up with another tool. I can't say for sure it has more power, but it seems to rattle my hands a lot more! I picked it up used on ebay and only because that's the batteries I have. It's a little disappointing on your chart but mostly does what I need. Thanks for all your work! P.S. I saw you tested it with other batteries in their line, but I didn't see the 8ah.

Good to see that even mid-tier brands are putting out the good stuff. Now if only Ryobi released a compact bandsaw

Impressive.

Man, for the rare times I need a lot more torque, I'm considering buying this! I have a Dewalt DCF921 that generally does most of what I need, BUT I have run into walls where I needed to call family with a 2767. This thing is on sale right now from Home Depot for $159 WITH a 4ah battery! Sooooo tempting lol.

i'd like to see country of manufacture flags on the rank chart

Seems like Milwaukee's next gen will be coming out soon. :D I hope

You should test those adapters to see if there is any power loss throughout the different impacts using them vs just the battery without the adapters.

I've owned a number of Ryobi tools. But I've never owned one I didn't want to immediately replace with something better and more substantial.

Would love to see this with the 6ah Ryobi pack with 21700 cells

9 or 6ah Ryobi pack? Instead of DeWalt jury rig? Curious how those fair

I just bough this last night and I’m waiting for it to arrive at Home Depot for me to pick up I got the tool for free on this deal for buying 2 batteries the value is at $200 and I got it for $99 but after taxes it’s a little more but it’s only a couple dollars more

It's also about how much you want to spend money on a nutcracker with? And there Ryobi beats most of the big brands. Then there is a Ryobi that releases 1600nm. But what's the point? Do you screw cars every day? Then you need a machine that can handle 1000 - 1600nm in turn? But as a home fixer, you can go a long way with a nutrunner that has a turn of 400-700 + nm in turn! These tests are fun to see, and between the brand Ryobi is at least as good if not better in terms of price, than other brands :)) More expensive is not always the best as many in this World Always think :))

Just got this. I didn't really need it, but it came with 2 batteries, a jig saw and angle grinder for around $270 so I couldn't say no.

Have yall tested the Kobalt KIW 1524A-03? The high torque kobalt that's not xtr.

Nice catch, try to avoid lawyers! 👍

Can we see some ryobi drills and grinders on your new dyno?

🧰😎 thank you

i would love to see you test the husky H4480 air impact rated at 800 ft/lbs. from home depot . it's really hard hitting and only 114 dollars so a great value for the money.

Dewalt 5ah has 18650 cells, use a 6ah or 8ah 21700 cell battery and see the difference

Wonder what this would do with a 9AH

found mine on ebay new in box for 130 plus 9.95 for shipping.

Home Depot seems to accidentally do a lot of stuff