Thanks Torque -Testies for making 300K possible!

If you wanted to test how the tools work with an essentially unlimited battery capacity, why not pick up a 16,000mah (16Ah) 5S/6S hobby grade RC battery, and use a 3d printed adapter to adapt an AS150 (150A continuous current rated) to the tool. One of those should be pretty easy to adapt to any tool that any of the adapters work for, and you’d have a battery that could supply literally thousands of watts of power without breaking a sweat. This would also let you hook up a current measuring device so you could see how many watts an impact pulls from the battery, or even see how efficient things like drills and die grinders are by comparing the watts in vs the watts out. I think that would be extremely interesting. As a bonus, those hobby lipo packs (which is the same stuff all the tool manufacturers are using for their stacked pouch cell batteries, as far as I can tell) cost $200-$300 each, so it’s not really more expensive than the tool manufacturer ones, except the hobby grade ones would almost certainly pack more of a punch per dollar spent.

It would be cool to see a power supply feeding the equipment so we know what the absolute max potential the unit can support. Would also give a % rating to “corded potential” with battery comparisons too.

I am proud to say I found this channel within its first few videos. Man its been an absolute pleasure watching this channel evolve and inovate in ways I never thought possible and consistently produce some of the best content on this platform. Keep up the amazing work TTC and Congrats on 300k.

I still remember stumbling upon your channel long ago. Remember when you started using those live moving graphs. So many good memories. I always knew this channel would take off but it’s so good to see you being rewarded for all you do. Congrats on 300k subscribers and as always, I’m very thankful that you allowed me to be a moderator for the channel.

You could rewire the dead IR impact to use an off the shelf ESC. That way you could have way more rpm,, not to mention it would be cheaper as well. They have bldc motors, so In theory... you could try out the limits of every tools hammer assemblies pretty easily. You would even have the ability to check the tools output at set power input (eg.: 100W test Milwaukee vs Makita). Strangely i really enjoy watching your channel after long day. Keep up the good work and congrats on the 300K subs.

It's about time Milwaukee stepped up their high torque since it was getting passed by competitors

you guys are the reason I was able to convince a co-worker that the torque claims on the package weren't correct, and stop him from under torquing a guide rod nut by over 500 ft-lbs. Spec was 1350 ft-lbs, and he wanted to use a regular 1/2" high torque on it. I've subscribed since before then, but it's been worth it.

Hell yeah! Nice shout-out to 3DPrintedAdapters!!! Jeffery custom made me some Hitachi/Metabo HPT to Worx adapters, so that I could use my 8Ah Metabo batteries on a HydroShot Ultra.

Grats on 300k guys! Can't wait to see what a Milwaukee "Forge" Battery is!

hey, I don't believe that the IR is totally dead, it's likely that the circuit in the trigger has burned out, a new trigger should revive it.

Clear sign that Milwaukee includes circuits to protect their tools and/or batteries into their tools.

you guys have been on a roll lately cranking out episodes, keep it up!

Finally a new one after 6 to 7 years. Congrats on the 300k you should be in the millions definitely one of the best channels out there by far

You are a far better channel than KZfaq deserves. Congratulations, and may your future successes far overshadow your present ones.

It would be interesting to see if the Kobalt stuff gets a boost from the flex pouch batteries or maybe even just the regular flex one's.

Congrats on 300K guys! Awesome! I want to let you guys know that I build M18 packs with Lipo packs from time to time and have one that is 5ah 5S LIPO and if you want we can parallel 2 and get our very own 10ah power stack. It won't be pretty but hey this ain't no beauty pageant 😂. If you guys wanted I would even send you one I have as a make shift M18 10ah. It uses the original BMS board and connector plate from an original M18 pack so it should be 99% safe... Excellent content, I love the TTC channel. Phillip TTS

Nice too see the battery adapters tested

God that looked like a 12/10 on the wrist breaking score.

Congrats on 300k, proud to say I have been here supporting yall since sub 10k keep it up guys

Now we just need a Gen 2 M12 FUEL Stubby that is geared toward the new XC5.0 High Output and CP2.5 High Output packs. Also would like to see a triple light ring similar to the Gen 3 impact driver!

Congratulations on 300k subscribers I am sure when the new batteries come out there will be a lot of fun things to test

TTC is the greatest gift to the internet. Awesome content! I think it’s only fair to see these batteries on all the other tool manufacturers. I bet the budget tools will surprise us if given the power boost

Just went out today and bought a 2967 after watching your review!

See it's content like this that makes this channel so awesome! Congrats on 300k you guys deserve it and more!! As always thank you for uploading. 👍👍

I just subscribed yesterday. You have some of the absolute best information and testing I have seen regarding these products. I am very interested to see where this channel will go. I have 2 suggestions of things I would love to see, firstly I would really like a good better best line up for common tools such as pneumatic torque wrenches and such to show which has the best value at each price point. Additionally, it would really intrigue me to see you test the mueller kuepes air tools. They only have 2, but I have seen both be used by several different heavy deisel mechanics. Thank you very much for all the quality content.

Would be cool to test sds drills. There is not a single person doing that. If one wants to buy a sds+ drill there is no chance to find a one proper review or test. Only ppl. unboxing it and drilling two holes - useless. Also there is a railway specific ultra beast impact driver - Robel ROMPACT E³. I've seen it in reality and you don't want to mess with it :D

I e been here since your first days and love it. Congrats on 300k. Milwaukee knew they needed to up the beans this is why I love the competition bringing it.

Would love to see how the flex 10ah battery holds up on all the new dewalt monsters 😅

Like to see more tests of Ingersoll Rand stuff

Easiest sub ever. Premium tool content that's in depth and tested in what matters. Plus shenanigans.

Can't wait to see a hot rod IR! Put a dedicated ESC that can take all the volts and amps, then use the DeWilt FlexVolts to get hairy. G'damn!

Hey! Slap a stihl 661 power head on that junker ir gun you got there!

Hey guys, just wanted to say KEEP UP THE GOOD WORK! You guys rule the torque world I watch daily!

Man I found you when you were a kid before KZfaq, crazy to see you now

I got hooked on this channel due to me constantly wanting an impact wrench but can't make up my mind. Now I got Dewalt sticking to Dewalt but curious to see how other brands stack up. UGGA DUGGA!

RIP that IR

Funny you mention that, I have a matco 16v battery that I converted to lipo, with a modified M12 right angle impact to accept it, I kept all the balance charging and it still charges with the matco charger, I haven't had time to test it alot but I can tell you it definitely rpms higher, it sounds like a jet engine 😂 0:47

The 2967 can break loose a nut put on at 2,400 ft lbs but it will ruin your impact socket. This tool has wicked power.

Thnaks for risking it for the biscuit on the IR. Epic win or lose, I'd throw the dice too.

You guys are nuts!!!, I love it.! Thank you. Really enjoy your vids

I have been watching your videos for a while now. I subscribed right away after seeing the first video. I always look forward to when your new videos drop.

I wish Milwaukee would have set the motor at an angle to the handle like IR has on their 1/2", or even how the M12 stubby is. Makes it so much easier to reach into places. It would have made the decision to upgrade from the 2767 easier, but for now, I'll stick with what I have

I having a real hard time deciding between Milwaukee makita and dewalt. I like how many tool categories Milwaukee has and the fact that their tools seem to constantly improve with battery upgrades. I like makitas handling characteristics. And dewalt is coming out with bangers

I'm feeling confident Mw pouch cell batteries will also be more expensive; for the same tech, capacity, and form factor as the rest that exist in tools.. But even more expensive lol ;/ DIY or experienced ones making custom solutions will be ever more appreciated though

"aaaaaand it's gone" 😂 listen man, you got my sub a few months ago because 1) your graphs are informative via picture and real-time-updates when testing, and 2) you didn't say anything about "smash my like button, hit that subscribe button" like the rest of them, and 3) you keep up with the times by testing new with old and show that database of product ratings so *I* can make the informed decision about what I need and at what price point I'm willing to compromise on. that's all we dudes could ask for these days.

Way to go TTC 🤘 300k+ subs. Keep up the great work!

If that IR tool is brushless, throw some RC hobby batteries and controller's at it. Will 100% be able to pump enough amps and volts to smoke the motor :)

That broken IR needs to be powered by a lawnmower engine now.

Can't wait to see the 2967 vs 2767, both using the new forge battery.

I saw one of these gen 3's being demo'd at some kind of event vs a blacked out DeWalt. So obviously I had to check if you guys had caught a wiff of this! I love seeing you guys messing with the battery adapters! I've been doing this for a while now, however my usage comes from having a mix of both Ryobi and Milwaukee in my work van (3 Ryobi tools total vs 10+ Milwaukee) and I had zero interest in actually running multiple batteries. So a $30 adapter later and I've got nothing my Milwaukee batteries in my van!

for a million subscribers y'all should have a machine shop custom make a gigantic impact hammer mechanism that weighs 50-100lbs. would be so interesting to see if break some nuts and bolts

Another Great Video. Sorry to see the IR temporarily shut down. Hopefully the new Milwaukee is better than the last update. Thanks for your testing.

Lipo batteries are badass but I can’t wait till we in the RC car community get some stacked lithium. I’m sure they will be safer also.

This is hilariously ironic, I’ve been trying to get my current 1/2” high torque warrantied, and have been getting the run around. They tried to get me to just buy another but I was like no with my luck once I get one the new model will drop, and here we are lol I just got mine back Monday

Keep an eye on Lowes. I bought the Flex back handle saw with a 10ah stacked battery for $255. An absolute steal. Lowes seems to randomly clearance Flex tools with different prices by store.

You can keep all your electric cordless tools, the only cordless that I have is a drill and it still costs me money over time because you will have to replace the batteries at some point and the batteries are not cheap. I will stick with my electric drill with a plug that I have owned for over 42 years now and it still works like new. I will also continue to use my air tools, my impact wrench works as good today as it did when I bought it over 13 years ago as do my air drills, air hammer and air ratchets. My Snap On air ratchet I have owned for over 44 years now. Guess what no batteries to buy for them.

COMPETITION FUELS INNOVATION AND BOY AM I EXCITED FOR FUTURE TOOLS

Milwaukee is just the GOAT once again proving they are the best there is in the market on many categories !

You guys do great work i get excited when i see your video's show up

Is it possible to start do some teardowns on drills and battery packs? To show what manufacturer of batteries, motors etc. that are used making it easier to choose parts for repairs and diy upgrades and builds. Personally I have great experience with diy power tool batteries, since they are way cheaper and can often deliver more amps than regular batteries do to using higher discharge capacity cells. Finding the right 18650 or 21700 cells to use is fairly easy since they are so common. Finding the right pouch cell to use is much more challenging since such cells are not as common.

I predict people are going to be complaining a lot about the lifespan of these LiPo batteries in a year or two

Awesome video. Really cool to see the difference that load voltage and current can play on different setups, some worked better than others obviously 😂

Time to load up the good ‘ol Klarna when this gets released

I'm Buying The New High Torque Just For The Shorter Design And The Tri LED Face

A smaller and lighter high torque with the same beans would have been a win...more power makes it a home run.Will be great to see it take down Dewalt with more beans and less size.Come on Milwaukee you can do it..

Gasped out loud when the IR died. My condolences to you guys.

Congratulations on 300k 🎉

Hi,the Ingersol Rand would be impressive to test with the the Flex batteries,and for that purpose probably most accessible would be an ebike brushless controller for suitable voltage (think 60Volts) and loads of amps,mounted underneath the IR impact wrench. Needs connecting the power,3 phase to motor,hall sensors from IR to ebike controller and trigger aka throttle to controller (possible a different one than stock IR trigger). Let me know your thoughts,I am not an electronics engineer but a bit of information help might add;think from 300K subscribers is possible to find someone with better knowledge to point you in the right direction. Wish you success and thanks for keeping up and updating. Hope the idea to be of help, IR motor should work fine with the increased voltage ,the brushless controller is the sensible part which burned-out. Changing that for a higher voltage rated one should do the trick although not as compact as stock IR controller.

I am in awe at those sockets spinning perfectly on the anvil for the RPM test. Absolutely no wobble, what witchcraft is this?

This reminds me of some good old times when you could throw 14v batteries (had more ah than 12v) in 12v Festool drills. They would run on so much higher rpm and more pixies that you would burn the crap out of the trigger every few months or so. Im sure there's much better over voltage protection these days in those potted circuitboards you now find in them.

It would be nice to see Milwaukee create some sort of flex volt system that allows them to start changing from their tried and true 18v lineup to a balls to the wall 24v lineup without destroying what they’ve already started

Convert that Ingersoll Rand impact to a predator 212 with nitromethane

I too purchase expensive toys to celebrate random milestones. Keep up the good work, lads!

Well you're informative with your videos... and NOT boring with it. How NOT to subscribe? Well done. Hope you get your mil soon enough.

Crazy, I can't wait till we get solid state batteries, that'll be the day!

Damn! That 10ah test....jeeze....some hot pickles that one

When I read the title, I was sure you were going to talk about a battery failure by leaking, not a PRESS leak. D'oh! Still, good stuff as usual.

The idioms are the best part of watching.

Go with power level 2 for most all car bolts. Stay out of level 3 unless your working on dump trucks.

T.T.C , you sir , are a legend, keep up the good work bro

This needs to be a winer. How really need this tool.

Need to put that flex pouch on the 3/4 gun That is what o already use to pull semi truck wheel. But do ever so often find that 1 lig that takes a good beating before removing

instead of superglue and the adapters being in abs or asa, you can acetone weld them

I sure hope the new high torque has those captured pins. But im afraid it makes too much sense. The reason they changed the 2767 to the new design was because the new 2967 uses them as well and would reduce cost of both. Fingers crossed it is not so.

Awesome video! I'm curious, do you have any plans to test the Milwaukee Tool cordless "air hammer" whenever it comes out?

Congratulations on 300k subscriptions

I would think IR would fix that impact for you. Probably just some burnt up boards. It would be good PR for them.

Dewalt watching and taking notes lol

That was hilarious... two seconds, and toast! Lol... thank you for at least trying.

That 10Ah battery is fucking huge... Maybe the manufacturers could take a note from Apple's new headset and have the battery on a cord to the tool. It would seriously lower the overall size (thus increasing usability), it would severely lower the overall weight (thus lowering RSI potential from wrist movements) and it could also allow for a solid wall connection if a user wanted to. I doubt they wouldn't really have to change much about the battery connector design to do this either. A cord would add a new element of danger too (getting caught, tripping, wear & potential electrical shock as a result, etc..) though so it would have to be a well thought out product design. They certainly couldn't rely on my dumbass for that part. Edit: Read some other comments about wires being bad and wall power being less so I guess typing all this out was just a big fucking waste of time.. great.

You should try making a turbine engine powered impact, or a series hybrid impact where there's an electric motor but a generator instead of a battery.

Just to let you know Ingersoll Rand will warranty that impact, we have a couple w9691's and they have had varying levels of stupidity applied to them and got warranty no problem. No letter saying "don't do that again", just "thanks for supporting Ingersoll Rand". A little FYI

Congratulations on 300K subs!

Love it. That’s for all the work you do !!

At this point, the limiting factor is simply the power output of the batteries. As battery technology advances are made, in the future, I'm willing to bet that we'll see torque numbers well above 1000.

Milwaukee defiantly got snap on and dewalt in the crosshairs with this one.

I effing love this channel

I'll be interested to see if the 12.0 M18 battery gets upgraded to prismatic. Not sure how that would hold up in outdoor power gear. But if anyone were to drop test one in the future, it'll have to be TTC first.

Congratulations on 301K