TouchDesigner InSession with Rob Bairos - November 5th 2021
Рет қаралды 1,791
2 жыл бұрынA hands-on session with the Derivative team
----
Guest:
Rob Bairos
derivative.ca
github.com/lodefmode
----
derivative.ca
@vjhellstonevisuals 2 жыл бұрын
Thorn in my side!
@TheTheThePhDJ 2 жыл бұрын
super cool
@KiR_3d 2 жыл бұрын
Hi! in 47:00 - how do you transmit power to the upper part? What parts do you use? I want to make potentiometers with LEDs that will be in custom made caps. I've got that I can transmit current by the inductance field. But it needs to have a kind of "PWM output" instead of a static current. Otherwise it's not transmitting (that's what I've got). Is this the only principle that works or we have some better technology?
@lodefmode 2 жыл бұрын
Hi. Original reply got lost. Sorry bout that. I transmit power via inductive charging coil I found at Adafruit. I used the 3.3V @ 500 mA option, if memory serves. Worked well for a high RPM application. In your case, since you're just rotating slowly, I would suggest a slip ring instead. These a great for a small number of signals. They can be found at Adafruit or Sparkfun as well.
TouchDesigner
Рет қаралды 2 М.
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН
PyGotham 2017
Рет қаралды 33 М.
TouchDesigner
Рет қаралды 3,2 М.
Blender Academy
Рет қаралды 704 М.